Infocube 0FITV_C01 and 0FITV_C01

Hi all,
Could someone tell me which are table used form the source system for the info cube 0FITV_C01 and 0FITV_C01.
Thanks
Ranjan

Hi Ravi,
Please check this link:
http://help.sap.com/saphelp_nw04/helpdata/EN/05/5ae8375ae64014e10000009b38f8cf/frameset.htm
I hope it will help u.
thanks and regards
Venkata Naidu Bandi

Similar Messages

Which are R/3 table used for Infocube 0FITV_C01 and 0FITV_C01

How to find which are the R/3 tables used for Infocube 0FITV_C01 and 0FITV_C01
Thanks and regards,
Ranjan

Hi Ravi,
Please check this link:
http://help.sap.com/saphelp_nw04/helpdata/EN/05/5ae8375ae64014e10000009b38f8cf/frameset.htm
I hope it will help u.
thanks and regards
Venkata Naidu Bandi

Creation of custom Infocubes, extractors and multiprovider

Hi all,
Can somebody give me the information regarding the creation of custom Infocubes, extractors, and multiproviders. It would ne great if you could give me some examples regarding the above in SD.
Thanks,
Sekhar

We will go for the creation of custom infocubes
when the existing business content doesnot suite your requirement.
when u r using the one existing business content extractor and u need the same requirement for another cube u can create your own extractor of the same type without changning the existing one.
we will use multiproviders for reporting purpose. suppose if u are having some 3 infocubes and u want to display the fields from the 3 cubes then go for the creation of multiprovider.

InfoCube Design and Partitioning

Hi All, when we design an InfoCube, like when we decide which craracteristics to go in which dimension, does partitioning decided at this time as well? If os, please provide some details?
Can somebody guide me on this? thanks in advance.

Hi,
Both Infocube design and Partitioning will help in improving the performance.
Partioning will be decided based on the data to be stored in the Infocube. If for example, lets assume that the cube will hold 15 yrs of data. As you know, partiontioning can be done only based on Fiscal Year or Calmonth
If partioning is done on Fiscal Year, we might decide to go for 15 partitions as we have 15 yrs of data. If we decide to go for 7 partitions, then 2 yrs of data will be stored in each partition. Like wise for Calmonths, we might go for 15*12 partitions.
If your system is 3.5, data should not be there to do partioning, if your system is BI7, partioning can be done even if data is present in the cube.
Regards,
Sekhar

0FITV_C01 Travel Costs - Travel Details

I'm looking at BC Infocube 0FITV_C01 and I cant see anywhere that I can report on things like the travel details that we store e.g. Destination & Reason for travel etc. Are these in this cube and I'm just missing where? Is there another cube that contains this sort of info or is some customization required?
Thanks

I am running into the same situation. I see that 0FITV_C02 Travel Planning seems to have more of the travel details.
Any regrets or advice on customizing 0FITV_C01? (in general, but also versus using 0FITV_C02?)
I'm also experiencing situtation of 0FITV_C01 - 0TV_ACCDATE Settlement Date not mapped in Business Content Update Rule.

Function module to get the chars and key figures of an infocube

Hi Everyone,
Can anyone please let me know is there any function module where if I pass the infocube name as the input parameter, it has to give me the output parameters its characteristics and key figures.
I require this to display the report in drilldown form i.e first the infocube name and then later its chars-i.e its fiscyear, etc and then compcode..
Thanks,
Prashant.

Thanks the fm is really very helpful, but is there anyother fm or table which stores all the record count of the infocubes in the bw systems according to there infoobjects, say for eg. infocube a has fiscyear and for the year 2000 or 2001 the no:0f records information.
It would be nice if anyone knows is there any fm which gives all these information.
Thanks,
Prashant.

How to get the size of all InfoCubes and DSO's?

Hi all,
My client wants a complete list of all InfoCubes and DSO's in terms of size (no records but KB). This list of the Cubes / DSO's gives us a picture of the used storage per Area and can be charged. Iu2019ve seen some threats and looked into the possibilities of ST14 and DB02. ST14 provides the ideal list but with a restriction for the top 30 InfoCubes and the top 30 DSO's. Does anyone know how to get such a list for all InfoCubes and DSO's?
Thnx in advance,
Henk.

Hello Henk,
while I am searching for some performance problems in our BI, I tried to look through the new DB02 of BI 7.0. And there is a function which helps a lot creating lists of Cube, DSOs and so on:
Start DB02
On the left side find SPACE -> Additional Functions -> BW Analysis
A Doubleclick will give you a broad survey of the current memory disposition regarding BI/BW objects.
In the BW Area "Cubes & related objects" you can find Infocube E- and F-Facttable. Depending on the Compressed state of your cubes you will find more data in E or F. Just doubleclick on one of these Entries. In my environment currently F-Tables are more effective.
You will then get a list of all Infocubes with size.
You will have to this for E and F Tables and some up over the Infocubes. But, because this will show only the Cubes and not the partitions of the cube it will be much easier to handle than DB02OLD.
Perhaps this helps, because you did not mention your BW/BI release.
Kind regards,
Jürgen

Generic function module for input two Infocubes and output one infocube-APO

Hi All,
My requirement is we have to pick data from two infocubes(Billing and Backlog) and send to One info cube.
can you please send me an;y generic function module is available in APO or explain me how to solve my requirement.
waiting for your response.
Thanks for Advance.
Shubhojit.

Hi,
I recommend using a multi-cube also but if you insist in JOINing two cubes then you can do that in an ABAP SELECT statement. You need to join the fact table and the dimension tables for all dimensions (for all InfoCubes). Please only retrieve data whose OBJVERS="A".
Please post again if you need more help.
Regards,
Emmanuel

Analyzing design and performance activities of infocube

Hi
I have one InfoCube(ZICSAST) of SD application area . It's model was very bad . They put all the characteristics in this infocube . And this InfoCube uses all 13-custom dimensions .
So i need analyze the performance and design aspects of this infocube .
So what i need analyze like Line Item Dimension ...etc ???
So pls let me what are the things i can analyze from this infocube.
Regards
mohammed
xeca

Hi,
    This is Thilak. There r so may aspects for designing a cube and to improve the performance. In order to design a cube.we have to consider 2 things.
1.Reducing number of dim tables and
2.Reducing no of records.
Note:
1. If the Relation between the master data tables is 1:m or 1:1 then go for assigning single sid table to single dim table.
2. If the relation in m:m then go for assigning multiple sid tables to single dim table.
Performance:
1.        When u r designing a cube first think is there any requirement of report based on Calyear/month or fiscyearperiod. If there is any requirement then go for partitionong a cube.
2.     If u going to assign a single sid table to single dim table then go for making that dim table as "LINE ITEM DIMENSION TABLE"

Attribute change Run and Infocube Problem

Hi SAP BW Experts ,
I am getting the following problem
2 days back our production system was down when Attribute change run is running in a process chain . After the system is up I triggered the Attribute change run manually for that specific master data Object. But the jobs was cancled automatically. When I checked the Job log I found the following messages
InfoCube XXX is locked by a terminated change Run
System error: RSDU_TABLE_COPY_INI/DDIF_TABL_ACTIVATE /BIC/E200073 /BIC/E100073 0
Message no. DBMAN100
When I verified manage screen in the Infocube XXX , one request is not rolled up . when I tried to rollup that particular request manually again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to create Indexes on that Infocunbe XXX , Again I am getting the same message InfoCube XXX is locked by a terminated change Run
When I tried to load data in to that Infocube I am getting the same message InfoCube XXX is locked by a terminated change Run
The Steps Taken By Me:
1. In SM12 , there are no lock entries for the Infocube XXX
2. According to A.H.P reply I verified the Support package . We are having Import Support package 18 for 3.10( BW 3.10 patch 18 or SAPKW31018 )
so I think there is no problem from patch side.
So please let me know by doing which task , I can eliminate the error message InfoCube XXX is locked by a terminated change Run

I got this reference from one of other site. Hope this solves issues of most of our ques on this topic.
We faced this problem and reported to OSS. They solved our problem.Here is
the answer from OSS
I connected to your BWQ system. I checked the table RSDDAGGRMODSTATEand
found an entrie for a change run "not yet" finished.
CNSID CLOSEDFL TIMESTMP_START TIMESTMP_END TSTPNM
207,851,300 20,030,910,141,500 0 SIDTLHG
As you can see, the field CLOSEDFL is blank (should be 'X' for an ended
change run) and the field TIMESTMP_END is also zero.
You can also check with the function module RSDDS_CHANGERUN_MONITOR as
in note 388069 that both objects you reported are the ones involved
with thi change run error (Infocube ZINV and Infoobject ZELEM_PEP):
E_CR_STATE C
E_T_CHANM 1 Entry (IOBJNM = ZELEM_PEP)
E_T_HIEID 0 Entries
E_T_AGGRSTATE 1 Entry (AGGRID = 3QR79ZYB6VGSDS3C42HPXMA8S
ICUBE = ZINV)
E_T_MSG 1 Entry (IOBJNM = ZELEM_PEP)
You have two choices to solve this problem. You cn either:
1.- Restart the change run and let it finish with ok.
The change run usually fails due to database errors, tablespace
problems, and when some user manually cancel it (NEVER should be
done!!)
2.- Change manually the entry from table RSDDAGGRMODSTATE that isdescribed
above. Set the field CLOSEDFL with a 'X' and also fill the field
TIMESTMP_END with a value with the following format
yy,yym,mdd,hhm,mss. Use, for example, '20,030,910,181,500'
IMPORTANT!!!
After this change on table RSDDAGGRMODSTATE, you have todeactivate
all aggregates, activate again and refill them!!
Hope this solves your error. If the issue is solved, please close this
message with the [confirm] button.
Best regards,
David =C1lvarez
SAP Active Global Support
The answer refers to our problem.We chosed option 2. Here is the AbAPcode:
REPORT ZLOCKED .
tables: RSDDAGGRMODSTATE.
select * from RSDDAGGRMODSTATE where CLOSEDFL = ' '.
RSDDAGGRMODSTATE-CLOSEDFL = 'X'.
RSDDAGGRMODSTATE-TIMESTMP_END = 20020912195015.
MODIFY RSDDAGGRMODSTATE.
ENDSELECT.

What is the difference between DSo and Infocube

Hello,
Kindly tell me what is the difference between DSO and Infocube?
And please tell me how to take the desicion that in whichi case we can use DSO and in which case we can use Infocube..

Hi ,
DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
This data can be evaluated using a BEx query.
A DataStore object contains key fields (for example, document number/item) and data fields that can also contain character fields (for example, order status, customer) as key figures. The data from a DataStore object can be updated with a delta update into InfoCubes and/or other DataStore objects or master data tables (attributes or texts) in the same system or across different systems.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
Use
The cumulative update of key figures is supported for DataStore objects, just as it is with InfoCubes, but with DataStore objects it is also possible to overwrite data fields. This is particularly important with document-related structures. If documents are changed in the source system, these changes include both numeric fields, such as the order quantity, and non-numeric fields, such as the ship-to party, status and delivery date. To reproduce these changes in the DataStore objects in the BI system, you have to overwrite the relevant fields in the DataStore objects and set them to the current value. Furthermore, you can use an overwrite and the existing change log to render a source delta enabled. This means that the delta that is further updated to the InfoCubes, for example, is calculated from two successive after-images.
An InfoCube describes (from an analysis point of view) a self-contained dataset, for example, for a business-orientated area. You analyze this dataset in a BEx query.
An InfoCube is a set of relational tables arranged according to the star schema: A large fact table in the middle surrounded by several dimension tables.
Use
InfoCubes are filled with data from one or more InfoSources or other InfoProviders. They are available as InfoProviders for analysis and reporting purposes.
Structure
The data is stored physically in an InfoCube. It consists of a number of InfoObjects that are filled with data from staging. It has the structure of a star schema.
The real-time characteristic can be assigned to an InfoCube. Real-time InfoCubes are used differently to standard InfoCubes.
ODS versus Info-cubes in a typical project scenario
ODS
why we use ods?
why is psa & ods nessasary
Hope this helps,
Regards,
CSM Reddy

Difference Between ODS and Infocube.

Hi Everyone,
ODS and infocube are both infoprovider, what are the difference between the 2?
thanks,
Ramil

Re: ods vs infocube
ODS and Infocube..
Difference between InfoCube and ODS Object
Assign points if its hepful.

ERROR WHILE UPDATING TO INFOCUBE

Hi All,
I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
Here's the ST22 analysis :
what happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
in "DUMP".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 42
of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".
I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
Thanks

Hi,
You should have the following format in the flatfile :
Considering today's date(18 Apr 2008) for example:
0CALDAY            20080418
0CALMONTH       200804
0FISCPER           0042008
0FISCPER3         0042008 (I think this can have additional periods as well, not sure though)
0FISCVARNT       No idea about this.
Reward with points if helpful.
Regards
Hemant Khemani

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

BW7.3 SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the Start Routine

Hi Gurus,
a face a strange behavior with BW7.3 and the Inventory Cube 0IC_C03:
the standard scenario works well when I activate the cube and its transformations ..bx, bf and um. Then I have modified the InfoCube 0IC_C03 and added some field like 0customer or 0doc_number etc. I also added the fields to the InfoSource 2LIS_03_BF_TR and everything was as usual.
Then I wanted to activate the transformation TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03 when I had the error
"E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
I already tried to copy and paste the structure of tys_SC_1 to tys_SC_1_full but whenever I activate the transformation my changes are dropped while the error remains. I assume, that the problem is due the compilation process.
Any hints to solve the problem? Thank you in advance.

Hi Cemal,
When we do the modifications at times the field structures inside the start routine are not update so that updation is required to be done manually. Copy the field list of structure (inside the start routine) tys_SC_1 (this is gryed out i.e. change disabled) and paste the same structure to tys_SC_1_full & tys_TG_1_full.
Check the routine and save it.
Hopefully it will solve your problem.
Regards,
Dipika

Infocube 0FITV_C01 and 0FITV_C01

Similar Messages

Maybe you are looking for