Infocubes with empty partitions

Hi All,
Can you suggest a way to find the cubes with empty partitions ?
Program SAP_DROP_EMPTY_FPARTITIONS is not a suitable way to do that, since we have more than 1500 infocubes to be checked.
Thank in advance
Berna

Hi Venkatesh,
Report RSORAVDV gives me result for table name (/BIC/F*) and its partition count.
What I need is the partitions with zero records. I could not find this data in this report result.
I should get the list of tables with lots of partitions and run the report SAP_DROP_EMPTY_FPARTITIONS for them.
And it is still a time consuming activity. ( we have more than 200 tables that have more than 100 partitions)
Any other suggestion ?
Regards
Berna

Similar Messages

Virtual InfoCube with Services - function module parameters documentation ?

Hello,
I have been trying to use a Virtual Infocube with Services.
I have seen most of the posts in SDN, and read the documentation in http://help.sap.com/saphelp_nw04/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
I did not manage to find a precise description of the import
parameters of the Variant 2.
In particular, what is the meaning of the
i_tx_rangetab TYPE rsdri_tx_rangetab parameter. I read in the code of RS_BCT_FIGL_DATA_GET that it has to do with query columns. In the tests I did this table is alway empty.
Also, i_th_sfc gives you the list of characteristics used in the query. But it does not inform you on wether these are in the 'rows' 'free characteristics' or 'filter'. Is there a way of knowing that?
Claudio Ciardelli

Hi Claudio,
I never implemented Virtual InfoCube with services with a FM, but I know there is a couple of How To Documents about named:
- How to Reporting from External Data via Virtual InfoProvider
-How to Implement a Virtual InfoCube with Services
both with some code samples: did you read it?
Hope it helps
GFV

How do you install a file system on an empty partition?

Hi. I'm running 10.3.9 on a B&W G3. I've formatted a 100Gb drive with a 40Gb partition on which Panther is installed (and which is running even as I type) and several empty partitions. I was going to install OS 9 on one of the empty partitions, but Disk Utility doesn't seem to want to let me do install a file system on an empty partition. Hence, the OS 9 installer can't find the empty partitions, and therefore can't install.
Is there another way to put a file system on an empty partition?
MTIA, Matt
PowerBook Titanium G4 Mac OS X (10.4) Also PowerBook G3, eMac, and misc elderly models

Matt--
One suggestion: if you can't figure out how to put a file system on the empty space, you could clone your current partition to an external drive, re-partition the internal drive drive and then clone the external back. Like John, I've heard of utilities that can re-partition a drive without erasing your data, but I just can't imagine using one if I didn't have a clone anyway. So that's what I've done when I want to change a partition size.
charlie

Lion 10.7.4 on an external drive with 2 partitions

I have an external drive with 2 partitions one of which is used for Time Machine Backups. The other is 300 gigs and I want to install lion on it for study but the installer will not let me do that. It might be because of the larger partition that I use for Time machine but I don't see why as it is a separate volume on the same drive. I keep getting the not able to install the recovery HD message. I also made sure to erase and reformat the drive (journaled extended). Any ideas why I can't do this?

Hey Kap
Tried to shrink the volume by 2 gigs but I get a partition failed error: This operation requires a newer version of Mac OS X for this disk. I am running 10.6.8 on my cpu and the partition is empty as I erased it. also it is extended (journaled). I don't understand this message. wierd.

Hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

I have my iMac G3 set up with three partitions like you are proposing.
I'd recommend getting virtual box on your new Mac. You can install the latest Linux version easier this way.
The problem is finding a PPC distro you like. I forget how I configured the Linux boot manager, yaboot. I may have skipped it or had it installed in the linux partition.
Ubuntu
The Ubuntu folks stopped supporting the power PC a while back. You will have to install an older version of Ubuntu.
You may to modify xorg.conf. See:
http://ubuntuforums.org/showthread.php?t=219532
Mac G3 modem install Howto
http://ubuntuforums.org/showthread.php?t=355205
You may have adjust adjust xorg.conf. See these instructions:
http://ubuntuforums.org/showthread.php?t=234437
I was able to get the last official versions of Ubuntu working on my G3 600.
6.10 Edgy Eft,
6.06 Dapper Drake
I used the alternate install and did the alterations noted above.
These versions are listed at the very bottom of the page.
https://wiki.ubuntu.com/PowerPCDownloads

How to fill a new single field in a Infocube with historical data

Hello Everybody,
We have an SD infocube with historical data since 1997.
Some of the infoobjects (fields) of the infocube were empty during all this time.
Now we require to fill a single field of the infocube with historical data from R/3.
We were thinking that an option could be to upload data from the PSA in order to fill only the required field (infoobject).
Is it possible? is there any problem doing an upload from the PSA requests directly to the infocube.
Some people of our team are thinking that the data may be duplicated... are they right?
Which other solutions can we adopt to solve this issue?
We will appreciate all your valuable help.
Thanks in advance.
Regards.
Julio Cordero.

Remodeling in BI 7:
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Hope it helps..

Installing Lion clean on hard drive with multiple partitions

I have a spring 2008 24" iMac running Snow Leopard.
I am about to put a new 2TB hard drive in it and after I do that I want to do a clean install of Lion on it.
I do not want to upgrade my Snow Leopard install to Lion. I will keep it on my back up drive as a fallback incase of serious workflow incompatiblities with the new OS.
For my workflow I create and use multiple partitions (Mac OS, Windows and multiple HFS+ for data) on my hard drive and I have seen that Lion creates it's own hidden recovery partition as well for the recovery functionality.
My questions are:
1) Will I have issues running Lion on a partition on a hard drive with multiple partitions that have different file systems?
2) If I install Lion into one of these partitions will it create it's recovery partition within the space of the partition it is being installed into?
3) I will be creating a clean install by downloading Lion using the App Store and then burning an installer DVD using instructions I found elsewhere and then using that to do the install on the new drive. Is that the best route to take?
All my current data I will have on a backup external hard drive and after I complete the Lion install on the new larger drive I will manually reinstall all my software and move my data back from my backup drive to the new drive one partition at a time except of course for OS partition. I keep all my real user data outside of that partition anyway.

I believe this article answers most of your questions.
http://support.apple.com/kb/HT4718
or possibly
http://support.apple.com/kb/HT4649
You will most likely run into the error message that "Some features of Mac OS X Lion are not supported for the disk" if you have multiple partitions set up, especially if they were not set up using Bootcamp and/or have serveral different file systems.
You can confirm that the Recovery Partition will not be installed by checking Disk Utility for your current partition map scheme.
This is most definitely not the end of the world as it is quite easy to create an external Recovery disk.
1) No, you shouldn't have issues running Lion, but Recovery HD will not be created.
2) No, and in your case it doesn't sound like it will be installed on your internal drive at all.
3) Yes. If you begin with an empty partition, then install Lion that would be considered a clean install.
Hope that helps.
Autumn

WEBI Report returns results even though the Infocube is empty

Hi all!
I have the following problem with WebIn report refresh functionality:
Step 1 -> I run my WebIn report this way: double click on my folder >> double click on my WebIn report >> the prompt values pop-up appears and I choose a given MONTH and click RUN. After that, my report brings some values that are stored in the infocube. No problem SO FAR!
Step 2 -> I go to RSA1 in BW and clean the infocube, leaving it without registers.
Step 3 -> I do STEP 1 again and my WebIn report still brings data that was in the infocube before, but no longer exists! The report should bring 0 register as the infocube is empty.
It sounds to be a cache problem! I went to CMC >> Servers >> WebIn Server and unchecked the CACHE boxes, in order to bypass the data in cache but, it did not work.
Does somebody has an ideia of what is going on??
Thanks a lot.
regards.

Hi Alican!
I actually built the report again, from scracth.
I checked Universe and no errors came out.
regards.

Regarding Virtual InfoCube with Services

Hi All,
I have a general doubt regarding two Standard InfoCubes
We have two InfoCubes FIGL_C01, FIGL_C01, based on which we have two Virtual InfoCubes with services. FIGL_VC1, FIGL_VC2.
What is the necessity for maintaining these InfoProviders as we are already having the base InfoCubes on which we can derive the queries.
What is the basic use of Virutal InfoCube with Services.
Regards.

Hi,
SAP help says:
<i>At query runtime, the service of the virtual InfoCubes uses the data from the basic InfoCubes to determine the balance-dependent location of the financial statement items (contra items), in the financial statement version and presents the result in the query. From the technical point of view, the service determines the item indicator in the key for the financial statement items depending on the balance in the respective node in the financial statement structure.</i>
To know further infomation about why we need to find the Item indicator in finance statement refer:
http://help.sap.com/saphelp_nw04/helpdata/en/04/7b95fb42b0f94aba334c0890dbbda4/frameset.htm
Note 673564 describes exactly why the virtual Infocubes 0FIGL_VC1 and 0FIGL_VC2 were developed. (because BW cannot handle the FI fin. statement hierarchies)
With rgds,
Anil Kumar Sharma .P

Virtual infocube with services - division of suppliers in categories

Hello,
Ive a problem and the idea to solve it with a virtual infocube with services. But unfortunately I dont know if its really possible to solve it like this.
The scenario is:
Ive suppliers, turnovers, goods (which have been delivered) and different quality deficiencies. In dependence of the turnover with each supplier, they will be ranked. For the position in the ranking they get points. From this start points one have to subtract points for the different quality deficiencies. In dependence of this end-sum, the suppliers will be divided into categories. And this division should be shown in the query.
But the suppliers can vary in each run of the query in dependence of the selection in the query. And the turnover of each supplier which depends on the selected goods can vary, too. So the division into the different categories depends on the selection and is dynamic. One doesnt know this before. And so it isnt possible to save the category of each supplier in an infoprovider.
Now I want to know, if its possible to solve this with a virtual infocube with services.
I hope theres somebody who can help me. Thank you.
Susanne

Hello Susanne,
first of all, yes, it can be solved with VirtualProviders. But I wouldn't expect it to have a good performance. It depends on the number of data records we are talking about.
When you create a VirtualProvider you should make sure that the RFC Packing switch is flagged on. You can then get the selections in the tables-parameter selection with the structure bapi6200sl. Now you need to read the raw data for your selection. Either use the function module RSDRI_INFOPROV_READ or write the data into an ODS to simplify the selection.
Based on the raw data you need to do you calculation and write the data back to the table data.
For details of the implementation of the VirtualProvider and the function module you can check the SDN. These topics are also covered in my book ABAP Development in SAP BW - User Exits and BAdIs that was lately translated into English. You can find both the German and English version under <a href="http://www.sap-hefte.de/katalog/hefte/titel/gp/titelID-1256">www.sap-hefte.de</a> or <a href="http://www.sappress.com/product.cfm?account=&product=H1948">www.sappress.com</a>
Best regards

I have a computer with a "partitioned" hard drive. The "C" does not have enough space to backup and upgrade my iPhone 4. How can I backup to my "E" drive instead of my "C"?

I have a computer with a Partitioned hard drive... the "C" drive, where everything defaults, is almost full and will not allow me to back up and update my iphone 4... can you tell me how to back up to my "E" drive?

Format the HDD in Disk Utility>Erase to Mac OS Extended (Journaled) and the open System Preferences>Time Machine and set up the external disk as the Time Machine HDD. Then look at the Options, and exclude what you do not want backed up.
Ciao.

External Dvd Install Windows 7 With MBR Partition

I have imac, macmini and macbook pro. My dvd rom on my imac has a failure and does not read most of the dvd/cd roms. Now i have bought macosx mountain lion and made a clean install. Now i want to install windows 7/windows 8 to my imac with bootcamp. When i try to install it from external dvd rom
it shows windows and efi icon. But when i want to install it with windows selection it does not boot. Or does only show efi dvd icon.
If i try to install it from usb stick it only shows efi install. And i want to install it normal mbr record but i cannot do it in imac.
And when i try above tests in my mac mini server it does them all normally. It can install everything in normal mode windos 7 or 8 what ever it doesn't care. . Below picture is taken from mac mini server. My dvd rom is broken and i understand imacs bios does only install normal mbr via internal dvd rom. But now how can i install without internal dvd rom with mbr partition ?
Below picture is taken from mac mini server i want to install with windows selection ??? Any ideas?

Please re-post on the Boot Camp forum, that is where the Boot Camp and MS Windows gurus hang out.

I have a Seagate 2TB external hard drive partitioned with one partition of Snow Leopard (my computer is running Lion). Can't seem to reboot using the option key. Any ideas as to what's wrong?

I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?

Didnt help. The night I asked this question I was able to reboot from the external hard drive after running Disk repair (which said everything was fine). Tonight I have tried again and cannot boot from the external. So I tried the Safe Mode restart and then chose restart with the option key held down as well as shutting down and trying holding down the option key while turning on the power. I have never been able to reboot just choosing restart and holding down the option key. Whenever the reboot from the external has worked I've had to shut down and hold the option key while turning the power on. Now that is not working. My computer is brand new as is the hard drive. I don't know where to go from here.
I can access the drive just fine while I'm in Lion. I just can't boot up using it. Help!

Z400 Discs with EFI partition not mounting after Win 7 Pro upgrade

HP z400: After a repair/upgrade of Win 7 Pro (64) sp1, any external disc with an EFI partition will not mount. Drive will be present in BIOS and Disc Management, though without a letter. Unable to assign a drive letter. All other discs mount correctly. Drives with EFI partition will mount on other PCs. All drivers appear to be current and fuctional.
This question was solved.
View Solution.

I figured it out... after two weeks of head-scratching, I finally found the cause.
I run MacDrive 8 so i can read discs with HFS+ formatting. That program needed to be fully uninstalled and re-installed after the upgrade. I had de-activated it prior to the upgrade, but it needed more than that. Everything works now as expected.
But wouldn't it be ince if Windows would read mac discs natively?

Weird problems with recovery partition

Hi. I just got a new X1 Carbon a few days ago. When trying to install Ubuntu, I messed up the bootmgr. At that point I still had the option F11 for recovery on startup, but choosing it did not give any results and after a restart, the option was gone. When researching the problem, I found this thread:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Need-help-with-recovery-partition-create-recov...
Since my recovery partition Q was untouched, the steps described in the thread allowed me to restore partitions S and C. So far so good, but now the problems start.
First, the letters of the partitions get messed up after every reboot. I assign Windows7_OS the letter C, SYSTEM_DRV gets S, and Lenovo_Recovery gets Q. Diskpart then lists the drives with correct letters. But after a reboot, they're back to D,C,E, respectively.
Then, when I boot the Windows recovery disk from a usb stick, it correctly recognizes that Windows is installed on drive D. It suggests that there are startup problems, which I tell it to fix. After the next reboot, it does not warn me about startup problems. When I then go to command prompt and enter
bootrec.exe /fixmbr
bootrec.exe /fixboot
then the Windows recovery disk commits suicide. It seems to attempt to fix its own bootmgr. At the moment, both usb stick and hard disk run with grub (Windows recovery on a multiboot installed by YUMI). After I run the commands above, the hard disk still runs with grub, but the usb stick now has bootmgr and fails to boot. I have tried this several times, each time recreating the Windows recovery disk with YUMI, and every time the same result.
F11 option is of course still gone. At this point I'm out of my wits. Any suggestions are welcome.
Solved!
Go to Solution.

In the end I formatted and made a clean install. F11 Option is gone. Recovery partition is still untouched, but I don't think it will be used again. Followed this advice to install a fresh Windows 7 using a usb stick:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html#post1839164
Since I did not have access to Windows with administrator rights, I had to use Ubuntu to create the bootable Windows stick:
http://cloud101.eu/blog/2012/03/24/create-a-windows-7-live-disk-from-ubuntu-linux/
The WiFi driver was not included in Windows, so I had to download that in another system, and install manually. From there I could then go online in Windows to download the remaining drivers from Lenovo (after the clean install there's a long list of unrecognized devices).
Since the laptop comes with 4 primary partitions preinstalled I had to merge the SYSTEM_DRV and the Windows7_OS partition in order to create an additional partition for Ubuntu. Then I installed Ubuntu and took control of the startup behavior using EasyBCD.

Infocubes with empty partitions

Similar Messages

Maybe you are looking for