Infopath form file checked out by user id given in connection file authentication section instead of the current user logged in

Hi ,
I am migrating infopath form from SP2007 to SP2013 my infopath form contains the checkout(on page load) - Checkin(on submit click) using webservices. I converted the
Checkout data connection to convert to connection file. In the udcx file i used authentication section. Checkout and checkin is working but the file is getting checked out to the user id specified in the authentication
section instead of the logged in user. I am
using web browser form, Sharepoint 2013 on premise authentication: kerberos
Authentication section in my udcx file
<udc:Authentication>
<udc:UseExplicit CredentialType="NTLM">
<udc:UserId>domain\userid</udc:UserId>
<udc:Password>Password</udc:Password>
</udc:UseExplicit>
<udc:SSO AppId="" CredentialType=""/>
</udc:Authentication>

Hi,
This is a quick note that we are performing research on this issue, however, I noticed that you are using Kerberos authentication method, however, you use NTLM in CredentialType attribute.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

How Do I create Windows Form file in VS and add the form to my VS project?

C#, How Do I create Windows Form file in VS and add the form file to my VS project by using C# code?
I like to create a Windows Form file into my VS Win Form project by using C#. I have the path and the file name.
I need a Win Form with FileName.cs, FileName.Designer.cs, FileName.resx, and FileName (as you see it VS by adding a Win Form manually by using VS)
Rune Brattas

You cannot create a Form from code at run time.
For one thing, the user running your application will, almost certainly, not have a copy of Visual Studio to hand with which to build anything. (Not that you actually need 'Studio at all; Notepad and csc.exe are all you actually
need), but that's another story).
You can do this with an awful lot of pain, using the innards of the compiler from iside your own program, compiling the new Form's source code on the fly and then executing the resulting assembly within your application. IMHO, that's a simply terrifying
prospect especially as the code you will be compiling will be on someone else's machine and over which you will have absolutely no control. If you're lucky, they'll spell something wrong and it won't compile.
The "usual" way to do this sort of thing is to create additional, "plug-in" forms as library assemblies and have your program load and execute these at run-time.
Regards, Phill W.

I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

I am having a similar problem. I am using Chrome and tried on Mac and on PC but the same. Its not completing my order and on PC saying:
We were unable to process your payment please contact our customer support.......... etc
But strangely its giving a confirmation button again. It gave me this error upon reconfirmation:
PMT_000011 : adbehme, en_IE, There is money to authorize, But no Aurthorize delegated were applicable, 12834289525

The SAP SSO authentication will fail because the current user doesn't...

Hi Experts!
I am facing an issue and I have tried to do all the tips on answers of topics under same subject.
Once I enter on my report and refresh, it prompts me a message that I don't have acess on one or more data providers, asking me if I want to proceed ( ID : WIS_30286) then I click yes and run the refresh and it prompts me another message: The SAP SSP authentication will fail because the current user doesn't have an alias that matches system BIDCLNT100..
I checked the connection and tested, but the server not answers (SBO0001), on details I see the same message above.
This on PRD, because on DEV it works fine.
Thanks in advance!

Hi,
for the first part where you don't access I would suggest you do an authorization trace to ensure that the user has all the necessary authorizations.
and on the second part - yes the user needs to have credentials for the system that you trying to access
Ingo

My ipod will extract the files but will not reload the current software on to the ipod

My ipod will extract the files, it will not reload the current software so I can download my itunes back on it.

Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues

Error in script task "The name 'file' does not exist in the current context"

I am new to the c# scripting and SSIS come from PHP and Foxpro.
I am using SSIS with a script task and I am getting am errror "The name 'file' does not exist in the current context" in the following code in the picture below: (See
Why does the object named "file" go away after the first refrence to it?? How do I make it avaliable for the whole script??
     public void Main()
        String cFileInfo = null;
        DateTime dFTPFileDateTime;
   bool fireAgain = true;
            List<IRemoteFileInfo> fileList = (List<IRemoteFileInfo>)Dts.Variables["SFTPResult"].Value;
            foreach (IRemoteFileInfo file in fileList)
                cFileInfo = file.Name + "|" +file.ModifiedTime +"|"+ file.Size;
            Dts.Events.FireInformation(1, "Name ", cFileInfo, "", 0, ref fireAgain);
            dFTPFileDateTime =
file.ModifiedTime;
<< This is where the error is occuring.
            Dts.TaskResult = (int)ScriptResults.Success;

I think you forgot { and } after the loop... Or is that deliberately?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

Check the modification date of a file and compare it to the current date

Hey everyone,
I'm writing a script that compares the modification date of a file to the current date, and performs actions based on whether the file was modified 7 days ago or not. I haven't been able to figure out exactly how to do this.
I haven't been able to find much in the way of this online, and I am not that familiar with manipulating dates and whatnot. I was able to get a bit of it, posted below:
currentDate=`date +%b-%d`
fileDate=`ls -l ~/.backup.txt | awk '{ print $6, $7 }'`
echo "$fileDate"
echo "$currentDate"
if [ "$fileDate" <= "$currentDate" ]; then
echo "old enough to run script"
else
echo "not old enough yet"
fi
Of course, this doesn't work. Any help would be much appreciated. This is for Leopard.
TIA,
Andrew

find ~/.backup.txt -mtime +7 -exec yourscript {} ;
You may need to play with the +7 value to get the exact number of days old the file needs to be.
The find command will accept a directory (actually it is frequently used with directories) and will find all files in that directory and any subdirectories below that match the find selection critiera.
So you could do something like
find ~ -mtime +7 | xargs yourscript
or
find ~ -mtime +7 -name "*.txt" | xargs yourscript
and if your script does not accept multiple filenames on the command line, you can use
find ~ -mtime +7 | xargs -n 1 yourscript
and if your file names have spaces in them, you can use
find ~ -mtime +7 -print0 | xargs -0 -n 1 yourscript

Gvfs-open $file opens nautilus instead of the file

Hi. This happened after some pacman -Suy, but I noticed just now.
gvfs-open, xdg-open, clicking on a downloaded file in Firefox or transmission-gtk opens a containing directory in nautilus and highlights the file instead of opening it.
Clicking the file in Nautilus does open the file.
Last edited by leniviy (2012-03-25 05:33:31)

So you just plugged your external drive iwith the library into the new computer?
Then it may be a permissions problem. Are you using the same user name as previously for your user account?
Do you have the "ignore ownership on this volume" flag enabled? If not, try this to avoid permission problems. You set the flag from the "File > Get Info" panel for the drive.
When the permissions on the drive are set correctly, use Aperture's First Aid Tools to repair the permissions in the library.
See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Also check, if the drive has the correct formatting - MacOS Extended (Journaled)
If the filesystem should be wrong, you need to reformat the drive with Disk Utility, but that requires to remove the library to a different drive, because reformatting will erase the drive.

CS2/CS3/CS4: Cannot get file path in Unicode of the current document on Windows

Hi All,
In my automation plugin I need to have full absolute path of the opened document with any possible non-English letters. Using SDK examples Listener and Getter that come with Photoshop SDK the full absolute path which I obtain is in the default ANSI code page (CP_ACP) and I can convert it to Unicode using MultiByteToWideChar() API. However this works well when I have corresponding to document name language set in the "Control Panel -> Regional and Language Options -> Advanced -> Select a language to match the language version of the non-Unicode programs you want to use." For example if name of the document has Russian letters and chosen language in "Regional and Language Options" is also Russian the described conversion works well. If I change "Regional and Language Options" to English for example, full path returned by Photoshop SDK API (AliasToFullPath in PIUFile.cpp) for the document with Russian letters will contain "????????.psd" symbols.
So I need to have an ability to get absolute file path in Unicode. Is it possible in Photoshop CS2/CS3/CS4 for Windows? I have searched forum and SDK but could not find info on it.
Is it possible to have native HANDLE of the opened file to get file info using Windows API?
Please advice.
Below given slightly modified code from Photoshop CS3 which I use to get absolute file pat of the opened document.
Thanks and regards,
Sergey
std::string outFilePath;
int32 theID = 0;
SPErr error = kSPNoError;
error = PIUGetInfo(classDocument, keyDocumentID, &theID, NULL);
if (error == kSPNoError)
Handle theFileHandle = NULL;
error = PIUGetInfoByID(theID, classDocument, keyFileReference, &theFileHandle, NULL);
if (error == kSPNoError)
int32 length = sPSHandle->GetSize(theFileHandle);
Boolean oldLock = FALSE;
Ptr pointer = NULL;
sPSHandle->SetLock(theFileHandle, true, &pointer, &oldLock);
if (pointer != NULL)
outFilePath = (char*)pointer;
sPSHandle->SetLock(theFileHandle, oldLock, &pointer, &oldLock);

Hi All,
Does anybody know, whether it is possible to get Unicode file path of the current document in Photoshop via Photoshop SDK API or without them?
Thanks,
Serhiy

File version is later than the current LabView version

I have LabView 2010 and I need to use an instrument driver that was written in LabView 2012.
Is there any way I can get this driver to work with 2010?

As SnowMule said, post the library in the Version Conversion board as a zip file. State the current version and what version you need. Then be patient. One of us will take care of it when we find the time.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

New Window from "FILE- NEW-WINDOW" duplicates all the currently open tabs in the new window. I want new window with just the "Home" tab please?

Running Firefox 3.6.13 on 64Bit Win7.
I like to group tabs on a topic in a window, and when the tabs get to be too many, or a new topic, I do FILE->NEW-WINDOW and expect a new window with just one default (Home) tab. Instead I get a new window with ALL the tabs of the first window.
I have checked all the Options I could find. Nothing helped. I CAN make a new Window with just one tab if I right-click a link and say "Open in NEW Window".

A new window should only open with the home page(s).<br />
If you see differently then you need to check your extensions.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

System files on OSX Lion / Changing the bakround of Log-on screen

I found a guide to how to change the incredibly boring bakround in the log-on screen on OSX Lion, which was described really easy. And since its such a boring bakround and since i like to customize my stuff, was just about to go through the few basic steps to change it.
When i directly ran in to a problem.
In order to change the bakround, i need to find this location "/System/Library/Frameworks/AppKit.framework/Versions/C/Resources" and then the file "NSTexturedFullScreenBackgroundColor.png".
But, If i search in finder, it shows no results at all if i search for the filename, and no results shown when i search for any of the folders names...
Why??
I have done no changes since i bought my macbook pro 13.3", with OSX Lion on it a few weeks ago. I am the admin and only user of the macbook.
It is set to Swedish as the main language, could that result in the system files having different names?
Otherwise other ways to change the log-on screen's bakround will be appreciated as well.
As long as the tip is not "Ravissant", wich i have already looked at, but that would only make the log-on screen even uglier.
I found the tips on this site: http://http://t3kd.com/blog/2011/07/27/how-to-change-os-x-lion-login-screen-back ground/?pid=313
Even though i'm not asking for help to understand this "how to", i'm just asking why my computer can't find thoose files.
Help Appreciated /optifekk

That has never been a feature of Mac OS X, but I believe there was some kind of third-party software that could add that capability. i don't recall what its name is, but you must have had that installed, and it either isn't installed anymore (perhaps removed as incompatible?) or is not working properly in Mountain Lion.

File when copied , is having the current timestamp instead of original time

Hello,
I am copying a file file-1(x-date) from server-A to Server-B. when the file-1 is copied to server-b, the size and everything remains fine but the timestamp changes to current timestamp.(Y-DATE)
my issue : I want to the file when copied to have original time-stamp(X-DATE)
any idea why this is happening ???
Thanks

BigDaddyLoveHandles wrote:
Skotty wrote:
You might not think that you could set the last modified date manaully, but alas, you can:
[http://java.sun.com/j2se/1.4.2/docs/api/java/io/File.html#setLastModified(long)]
Oh lackaday! Why "alas"?It's suuuuuch a hassle!

Checkout and checkin in sharepoint 2013 infopath form

I am migrating infopath form from SP20010 to SP2013 one of the form contains the checkout(on button click) - Checkin(on exit) functionality.
I converted the Checkout data connection file.
its giving me error
An error occurred while trying to connect to a Web service.
An entry has been added to the Windows event log of the server.
Log ID:5566
and In the udcx file i used authentication section with secure store app, Checkout and checkin is working but the file is getting checked out to the user id specified in the authentication
section instead of the logged in user.Environment using web browser form, Sharepoint 2013 on premise authentication kerborose.
Please help.

Hi Nishant,
Can you please check logs for more details against log id and provide more information.
Regards
Soni K

Infopath form file checked out by user id given in connection file authentication section instead of the current user logged in

Similar Messages

Maybe you are looking for