Forms Web - Icons not showing up

Hello,
I'm running a form on the web, and I have several iconic buttons. The Oracle Developer 2000 book says that icon image files must be in .gif format, and must reside in the same directory as the html page. So I converted my icons to .gif and placed in the required folder.
On the icon property for each button, I am not specifying a path, just the filename with no extension.
The icon is not showing up. I tried setting the icon filename via set_item_property(button_name, icon_filename, filename)
ON_NEW_BLOCK_INSTANCE and placing the path to where the html file is located. The icon will not show up.
Help?
Marie
null

Hi ,
U have to update the in registry.dat file
set default.icons.iconpath=/icons/
and map this virtual directory /icons/
in web listener setting with Physical
directory of ur Icons.
null

Similar Messages

Infopath Form Web Part not showing form

Hello,
I recently edited a list form in a InfoPath 2010 and published it to my site. When clicking on "Add new item" it works fine. The new form shows up and all is well. The idea though was to enable the form from a separate page by using
the InfoPath Form Web Part. We have other forms setup this way on our site that work fine, but for some reason, when I added the web part to the page, pointed it at the list and set the custom content types (only single option anyways as the list is
built on a custom content type) nothing is displayed within the web part.
I can't find any difference between my form and the already created forms, but as I didn't create the ones that are working I may have missed some setting. There is no error, no message, just a blank web part... Actually, that's not true. When I
check in the page I see nothing. But when I publish it, I see only a close link and a bit of a header div.
If anyone would happen to have seen this before, know what it is or know how to fix it I would be greatly appreciative.
Thank you.

Hi David,
From your description, you published an InfoPath form to SharePoint list, and it worked well in the list. However, when you added an InfoPath form web part to another page, it displayed as image.
I could not reproduce the issue, I just selected list and content type, left all other settings as default, it displayed as expected. Did I miss anything during reproducing your issue? Did you make any customization to web part or InfoPath form?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Button Icons not show in Form 11g run time

Button Icons not show in Form 11g
I installed the following tools :-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle Portal,Forms,Report,and Discoverer Services (11.1.1.4.0)
1. Create a "icons" folder and place all gif images in there :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\<icons>
2. Within icons i made a jar file of all gif images :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\icons\jar -cvf frmicons.jar *.gif
3. Copy this new jar file into :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\
4. Edit formsweb.cfg file:
imageBase=codebase
archive=frmall.jar,frmicons.jar
5. Edit Registry.dat file:
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
After doing above configuration i create a form and place an icon on the button.
Set button's icon property = Yes and give name of icon without extension.
When i run the form not display icons who configure icons.
Please give the solution how to set icons on button.
Thanks & regards,
Java console message :-
Java Plug-in 1.6.0_25
Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Shiv
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Forms Session ID is formsapp.8
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92471: unable to load image exit for iconic button item

Duplicate post. Refer to comments in Push Button Iconic not show in Forms 11g

After upgrade ios 7 and itune 11 iphone icon not showing up on itune

I've just upgraded my iphone4 to ios 7. also upgraded itunes to 11.1, but then when I connect my iphone onto my PC, the iphone icon not showing up on itune, I can only see it as a camera device on file explorer in windows8, what can I do?

Please read this :
http://support.apple.com/kb/ts1538
Hope I helped.
Donnie.

Air Play icon not showing up in menu bar. How do I fix this?

Air Play icon not showing up in menu bar. How do I fix this?

What year is the MacBook Pro from?
AirPlay: iOS and Mac

Sometimes JavaFX form (BorderPane) does not show correctly

We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details.

HT204380 facetime icon not showing in settings anymore

My facetime icon not showing in the main page & settings anymore...I am using an iPod touch 4th gen...please help!

thanks!

App icons not showing up after downloading?

Why do my app icons not show up on my iPad2? I have purchased the apps on my iPad directly. Also, I know they are there because when I search it finds them and then I can open and run them.

Jennifer-
Could the Apps be on the second page of Apps? From your Home page, wipe across from right to left to scroll to page 2.
If that is the problem, press and hold on the icon. When it starts to wiggle, you can drag it back to the first page. This can also be done from iTunes when the iPad is selected.
Fred

Icon not showing

I am using Windows 7 oracle database 10g and developer Suite 10g
configure all the steps accordingly but not showing icons, when I copy all the Gif files in /Forms/Java/ folder then showing icon only in push button not showing in Tree Node.
Steps I followed:-
Hkey_Local_Machine\Software\Oracle\<Forms10 g_Home>\UI_ICON by entering the
path of your GIF/JPG files for e.g. J:\Icons
and create ui_icon_extension and give it value GIF
Creating Jar Files
Jar -cfv icons_name.Jar *.gif
Copy this Jar File into Java Folder.
Modify REGISTRY.DAT file
default.icons.iconpath=icons/
Modify FORMSWEB.CFG file
i) imagebase=codebase
ii) archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob .jar,my_icons.jarstill not showing images in HTree Node

Hello,
Here is the content of the first note:
A hierarchical tree component is used within Forms. When the tree is populated with (ftree.populate_tree), it does not show the associated icons "from the icon column within the query". The icons are stored in a jar file.
The environment file and the web configuration file are correctly set. For example, an image in the jar file appears on an iconic button.
Cause
The cause of this issue is determined by the unpublished Bug 10410309: FTREE.POPULATE_TREE DOES NOT SHOW ICONS
Solution
If the icon node value is refreshed, then the associated image appears.
A simple loop like this will solve the problem:
DECLARE
htree ITEM;
node ftree.node;
state varchar2(30);
state2 varchar2(30);
BEGIN
-- Find the tree itself.
htree := Find_Item('TREE.TREE');
Ftree.Populate_Tree(htree);
go_item('TREE.TREE');
-- Find the root node of the tree.
node := Ftree.Find_Tree_Node(htree, '');
-- Loop through all nodes and refresh their icon value
WHILE NOT Ftree.ID_NULL(node) LOOP
state2 := Ftree.Get_Tree_Node_Property(htree, node, Ftree.NODE_ICON);
IF state2 is not null THEN
Ftree.Set_Tree_Node_Property(htree, node, Ftree.NODE_ICON, lower(state2));
END IF;
node := Ftree.Find_Tree_Node(htree, '', ftree.find_NEXT,Ftree.NODE_LABEL,'', node);
END LOOP;
END;
Now the icon image value will be read from the jar file containing the images.
The second note talks about not using subdirectories inside the jar file.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

JCheckBox-icon not showing

Hi there,
i hope this has not been covered already, i searched this forum looking for all kind of JCheckBox posts but did not find what i was looking for. If i missed it i'm really sorry and would appreciate any kick that get's me into the right direction ;-)
I'm using some JCheckBoxes in my application and on all testsystems i ran it on everything worked fine. Now i got finally access to the machine it should run on in the end and of course it screws up. The selection icons for the JCheckboxes are not working correctly, more specific the IconBackground is black so i can only see if the box is checked when i highlight it. I really have no clue why it is behaving differently on this machine (same operating system, same jre-build). If anybody could give a hint what the problem could be or what work-arounds are known, it would be greatly appreciated. For now i try to mess with the UIManager, but i'm kinda stuck there because the documentation on how to use it for what purpose is not really rich ;-)
Thx in advance, Chris

Hello,
Here is the content of the first note:
A hierarchical tree component is used within Forms. When the tree is populated with (ftree.populate_tree), it does not show the associated icons "from the icon column within the query". The icons are stored in a jar file.
The environment file and the web configuration file are correctly set. For example, an image in the jar file appears on an iconic button.
Cause
The cause of this issue is determined by the unpublished Bug 10410309: FTREE.POPULATE_TREE DOES NOT SHOW ICONS
Solution
If the icon node value is refreshed, then the associated image appears.
A simple loop like this will solve the problem:
DECLARE
htree ITEM;
node ftree.node;
state varchar2(30);
state2 varchar2(30);
BEGIN
-- Find the tree itself.
htree := Find_Item('TREE.TREE');
Ftree.Populate_Tree(htree);
go_item('TREE.TREE');
-- Find the root node of the tree.
node := Ftree.Find_Tree_Node(htree, '');
-- Loop through all nodes and refresh their icon value
WHILE NOT Ftree.ID_NULL(node) LOOP
state2 := Ftree.Get_Tree_Node_Property(htree, node, Ftree.NODE_ICON);
IF state2 is not null THEN
Ftree.Set_Tree_Node_Property(htree, node, Ftree.NODE_ICON, lower(state2));
END IF;
node := Ftree.Find_Tree_Node(htree, '', ftree.find_NEXT,Ftree.NODE_LABEL,'', node);
END LOOP;
END;
Now the icon image value will be read from the jar file containing the images.
The second note talks about not using subdirectories inside the jar file.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Why is my image icon not showing up for subscribers?

I'm using podbean which produces the itunes feed and auto-submits it. You can see the icon when you visit the itunes page on the web - https://itunes.apple.com/us/podcast/bloggersareweird/id589296259 but when you actually subscribe via iTunes the icon does not show up either on desktop/laptop iTunes or iPad/iPhone.
Can someone take a look at my feed and see what I did wrong? My image dimenstions are 1400x1400 which is the recommended size, I believe.
Here's the feed.
http://bloggersareweird.podbean.com/feed/
Thanks for your help!
D.J.

Though the image which appears in the iTunes Store is referenced in the feed (as you have done) the image which appears in some podcasts when subscribing is not. It has to be actually embedded in the media file, and can be different for each episode if desired.
A method for doing this is described in this page:
http://www.wilmut.webspace.virginmedia.com/notes/coverart.html

PHP icon not showing in design view

I just ordered Studio 8 and currently working on the demo
version of Dreamweaver 8. I had been using FrontPage for many years
and I finally hit it's limitations. I am creating new pages from
scratch and not importing any of my older FrontPage web pages. I am
coding in PHP and noticed this nice php icon that shows in my
design view of where all my php code is. This FrontPage could never
do. I have a table that is doing multiple "include" calls. I am
able to successfully add 2 lines of code, which generates two php
icons in my design view. When I try to add a 3rd line of php code,
it removes all of the nice php icons in the design view. For the
rest of the document, if I add more code, then the icons will not
show up. The PHP is in the code view, but the design view is no
longer showing the php icon. Does anyone have any ideas on how to
make them show up permanently? This is one of many great features
of Dreamweaver that drove me to purchase it.

Thank you for the quick response. I went home and took a look
at my code. It matches pretty closely with what you offered as a
suggestion. That didn't seem to fix the issues I am having. Maybe
there is something I am missing that will stand out for you.
Here is a sample of it:
<td>Item Review 1</td>
<td><div align="center"><?php include('
http://www.mytestsite.com/review/stars_only_by_item_id_listing.php?item_id=5');
?></div>
</td>
<td><div align="center"><a href="
http://www.mytestsite.com/review/index2.php?item_id=5">
link</a></div></td>
</tr>
<tr>
<td>Item Review 2</td>
<td><div align="center"><?php include('
http://www.mytestsite.com/review/stars_only_by_item_id_listing.php?item_id=6');
?></div></td>
Thank you for any help you can offer. This one is really
stumping me. Could it be that I am using the demo version and not
the full version?

Finder Strange behaviour: folder and file icons not showing, then they disa

Yesterday I was trying to install the postgresql package from (http://web.mac.com/dru_satori/iWeb/PostgreSQLforMac/Welcome.html). Actually I had an older version of their package, i uninstalled it, tried installing the new package, but kept receiving errors that the installation was not correct.
Now the point of this question, as I was doing the above, i started to notice that some files (either on my desktop or in a folder window) are not showing the icon. Only the label is showing! when I click on such a file, the file disappear (i mean even the label is gone).
I have completed permission repairs, disk repairs. I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory. I have also re-lunched the finder using the force quit window. I have also trashed the com.apple.finder.plist and logged out and then logged in again. I have just noticed that (pages) is asking for the serial number! I have this program installed months ago! It seems that some other files are also getting damaged!
Is there something that I am missing? Is this a bug? is there any solution, because this is very annoying and it might indicate a bigger problem that I am not aware of.
thank you for your help
PowerMac G5 Dual Mac OS X (10.4.4) 4.5 GB RAM

I also noticed that this is only happening in my account, but not that of other accounts on this computer, which indicates that this is a problem in my home directory.
Good first troubleshooting step!
Now log back into your normal user account: (In your case I would try preferences first)
1. Navigate to ~(yourhome/library/fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly;
• Navigate to ~(yourhome/library/preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
   • Navigate to yourhome/library.
   • Get Info (Command - i) on folders for apps you are having problems with.
   • Open the "Ownership & permissions" disclosure triangle.
   • Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
   • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
If the issue persists navigate to yourhome/library/caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
-mj
[email protected]

KFF icon not showing,instead showing segments individually on OAF page

Hi All,
The below problem is regarding KFF.
KFF icon is not showing,instead each individual segments are seen on my details page.
Our client requires to see KFF icon so that when the client click the KFF icon, the page should show the segments assigned to the KFF.
Please help.
Regards

Hi,
What do you mean by KFF icon???
On Oracle forms there is a DFF icon available...[].
And also it is the Standard OAF behaviour that segments are displayed as seperate text inputs or lov Inputs.
I guess there is no symbol for KFF????
Thanks,
Gaurav

Icons not showing in munu bar

Hi , I migrated my forms into 10g successfully. I am having an issue with icons . All my icons are showing on the menu bar except for two. if I take the mouse and move the mouse The hint displays but the icons are not visible. the properties are the same as of other icons that are showing . can someone help me please...

Hi!
I assume, your icons are gifs.
May you try to open that two not displaying icons in a image viewer, may irfanview, and save them again.
Sometimes forms has problems with several gif images.
Do you use a jar file for your gif-icons?
Regards

Forms Web - Icons not showing up

Similar Messages

Maybe you are looking for