Infopath submit button only works for the first row in a repeating table
Hi, I have a InfoPath Email submit button issue I could not figure out. I have a master/detail repeating table in my form, and one of fields is "EmailAddress" which shows customer's email address. I created a submit button and put the "EmailAddress"
field to "TO" object. When I tested it, the submit button only would return the first row of emailaddress from the repeating table, but not the rest of it..
What I want is when I highlighted a customer, and click the submit button, the current customer's email address would show up in "TO" list. I did some research and saw some suggestions about using current() function. So I put current() in the front,
like this:
current()/dfs:dataFields/d:vw_HZLeadLists/@EmailAddress
Still not working..Just return the first record of emailaddress from master repeating table... Does anyone know what's going on here? Thanks a lot!
Hello,
Use double eval to get all rows values. See my reply for more information in below thread:
eval(eval(EmailAddress, 'concat(ToField, ";")'), "..")
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc22aeb7-351f-45a7-8a4c-94132c3e0db2/eval-semicolon-function-issue?forum=sharepointcustomizationprevious
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help
Similar Messages
-
The get messages function only works for the first account
regardless of which account is listed in any order, the get messages button only gets messages for the first account in the list, thus if you are expecting one into another account you have to highlight that account and click the get messages....
I have no idea what your talking about. Thunderbird has no apps.
Perhaps your talking of add-ons. If you found an add-on perhaps you could mention what it is, so that I and other might know it exists.
You appear to be under some misconceptions,
!. Moderation is about answering questions. Wrong. Moderation is about deleting questions, editing comments that do not meet the guidelines for the forum and banning users.
2. Searching add-on is someone elses job.
3. Someone is getting paid to accept your criticism. I am not.
If I as a fellow user an ignorant of an add-on then tough luck for those I advise. They should have been resourceful enough to search for add-ons before they asked the question. I can only tell people what I know. -
Af:commandButton only works for the first 10 rows returned in the af:table
Using JDeveloper 10.1.3.2.0.
I am new to ADF programming. I have attempted to create an ADF page that contains a search and return table in the same page. The search appears to work fine but the return table displays odd behavior. If the search returns more than 10 rows such that it is possible to page forward through the rows returned the command button associated with the return table that allows the user to pick a particular row and navigate to another page does not work. If the user finds what he/she is looking for in the first ten rows then the command button works fine and the user is taken to the next page. The command button is actually defined to have an af:setActionListener to set a value in a backing bean and then command button has an action to invoke a backing bean. Both of these fire just fine if the selection is made from the first 10 rows. However once the user pages forward to another set of rows then neither seem to happen. Any advice on where to figure out what I did wrong?When I get a component that seems to do nothing under certain circumstances, the first thing I usually check for is Javascript errors. Sometimes errors on page load can keep a component's Javascript from firing properly.
Try reproducing your problem in Firefox (or another browser with a decent Javascript error console; IE doesn't have one, although I think you can get extensions that provide JS debugging). Check the error console:
# Before scrolling off the first 10 rows.
# Right after scrolling off the first 10 rows.
# After unsuccessfully clicking the command button.
Do any interesting errors show up in steps 2 or 3? -
Previewing mp3's in the preview panel only works for the first 3 seconds
When i click on an mp3 to preview in the panel it only plays the first few seconds or so. How can I fix this?
My appologies. I have a Win 7 PC. Adobe Bridge CC . Yes all the files work on other players. And bridge will actually play wav and af files fine, but it wont play mp3's past a few seconds. It says it's playing in the preview pannel but the audio cuts out.
-
Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change
I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
Is there another setting required to maintain the page breaks after the item change?
Thanks.We are experiencing the same problem. Did you ever find a solution?
-
Button get_url only worked after the first loop
Hi all,
I created a new layer, draw a rectangle, converted it to button, made its alpha to 0 and then added a snippet to go to the url. But when it played, the action only worked after the first loop had finished. It didn't work at the beginning.
Somebody save me
Thanksyour button must exist when your code executes.
-
DVD "Play All" Button Only Works for Two Clips
I have Castle Season 1 on my computer and thought it would be nice to create a DVD of all of them. I have a "Play All" button and an "Episodes" Button. Both seem to be registered as a button (Havn't linked the "Episodes" button yet)... I'm hoping to get the "Play All" button to do just that, play all of the episodes in a row, and to do that I have them linked by end action in a row with the last one going to the 'Last Menu'. It works for the first two episodes and then when I click the next chapter button (In the built in DVD 'emulator') after the second episode it goes back to the menu. To see if there was a difference in settings I switch between the first and second episodes to detect any setting changes, and there were none (Except the end action was set to different episodes). I am at a loss on what is wrong.
If screenshots or settings need to be posted just let me know, and I would be happy to post them.
Thanks Ahead
Windows 7 Home Premium 64 Bit
Adobe Master Suite CS5
AMD Phenom II B45 (Unlocked Athlon II x3 445)-Not the best CPU, but i'm on a tight budget
4GB G. Skill 1600 DDR3 RAM
GTX 460 OC'd
60GB SSD Boot Drive
1TB HDD (1x250GB, 1x750GB)Glad that Playlist worked for you.
1.) The buttons don't animate when selected. On a DVD player, there would be no way to tell the difference on what I had selected, is there any way to remedy that?
In the Menu Editing Panel>Properties>Motion area, you can check Animate Buttons. This will show the Thumbnails as animations.
For telling the user which Button has been navigated to, one uses Sub-picture Highlights, which are only 2-bit color. Are you using a Library Menu? If so, which one? If it's a Library Menu, the Buttons should have the Sub-picture Highlights Layer in each Buttons Layer Set. If you created the Menu from scratch, did you add a Sub-picture Highlight?
2.) I want to add a video clip that will blend into the main menu, how would I go about doing that?
I do this often. First, I will go into Photoshop, and make a Flattened copy of my Menu, with the Sub-picture Highlight that the user will see (see above), visible. This will then be used in PrPro, as a Freeze Frame. In PrPro, I create the Video file that I want, and at the end, just add that Flattened PSD "Freeze Frame" from the actual Menu. This next part takes just a touch of math, but hang in there with me. We want a seamless transition from that Video to the Menu, so will use a Cross-Dissolve Transition between the Video on the Timeline and the Freeze Frame. We need to set the Duration of that Freeze Frame to just slightly longer than one-half of the Duration of that Cross-Dissolve. All we want is for the full Freeze Frame to be on-screen for a couple of Frames, as the Buttons will be dissolving in, and we do not want the user to begin pressing them yet, as they are NOT real Buttons, but just a graphic of the Buttons. I leave ~ 3 Frames, past the Transition. Remember, when you create that Freeze Frame in Photoshop, you want to make sure that the default Button's Sub-picture Highlight is exactly as the user will see it, when the real Menu comes up.
Export this Video (w/ that Freeze Frame at the end) from PrPro, as say a DV-AVI, and Import it into En as a Timeline. Set that Timeline to First Play, and its End Action to go to your real Menu.
3.) My C:// Drive is very small (60GB) as its just a boot drive SSD.
-3a.) Can I delete the cache without harming my saved encore file? (I only have 1GB left, and my system keeps acting up because of it)
-3b.) Is there a way to set the media cache to a different drive (I have three, and since using After Effects/Encore/Premiere the free space is shrinking at an alarming rate )?
This is a bit tricky. Do you ONLY have the one physical SSD? If so, you will seriously want to look into adding more. You can clear the Media Cache files (do not Delete the folders though), however, En will recreate them, when you begin working on the Project. HDD's are cheap, and for Video editing and authoring HDD real estate is very important. If you have more than the one SSD drive, please give us the full details of your HDD's, and how you are using them.
Good luck, and hope that this helps,
Hunt -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?
The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced. -
I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?
Have you went to Bose"s support site?
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update. -
I just purchased a album and one or more of the tracks does not play all the way through. One track which is a 13 minute track will only play for the first 3 minutes. Larry
Delete the songs from your iTunes library and redownload them by clicking "Purchased", under Quick Links at the top right of the iTunes store.
Download past purchases:
http://support.apple.com/kb/HT2519
If this doesn't work contact iTunes support here:
http://www.apple.com/support/itunes/contact/ -
Flash Player only works for the account that downloaded it
I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?
hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
> -
Including image in SharePoint survey answer and hiding elements only work on the first page
Hi All,
I would like to add some text/remove some text etc on a sharepoint survey page.
Which i have done using jquery/jscript.
But unfortunately it only works on the first page.
Any ideas how i can get it to work on all the pages?
See a sample here on how you can add the scripts:
http://sharepointkings.blogspot.com.au/2011/05/include-image-in-sharepoint-survey.html
CheersHi Patrick, does the first page use the same ASPX file as the other pages? If not, you will need to add your jquery/jscript to the other page as well.
Dimitri Ayrapetov (MCSE: SharePoint) -
Showing data for the first row only
Oracle Experts ,
Below is my table in oracle.I wnat show Company ID only for the first row of each company. Table 2 is my output .
Company Country Company ID
BARCALAYS UK 1
BARCALAYS USA 1
BARCALAYS Australia 1
Kingfisher UK 2
Kingfisher INDIA 2
Kingfisher INDIA 2
Output Table 2 :
Company Country Company ID
BARCALAYS UK 1
BARCALAYS USA Null
BARCALAYS Australia Null
Kingfisher UK 2
Kingfisher INDIA Null
Kingfisher INDIA Null
Please give me a sql query.
Many thanks in advance .
Regards,
Dirasabased on if a particular country is appearing twice for the same company and company_id wether to show the company_id for that country or not you may use any of the below queries :)
/* Will show compan_ID twice if the country is repeated */
with x as (
select 'Foo' company_name, 'UK' country, 1 company_id from dual
union all
select 'Foo', 'USA', 1 from dual
union ALL
select 'Foo', 'USA', 1 from dual
UNION ALL
select 'Foo', 'AUS', 1 from dual
union ALL
select 'Foo', 'AUS', 1 from dual
union all
select 'Bar', 'UK', 2 from dual
union all
select 'Bar', 'USA', 2 from dual
union all
select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
FROM (SELECT
company_name,company_id,country,rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
FROM x)
/* Will NOT show compan_ID twice even if the country is repeated */
with x as (
select 'Foo' company_name, 'UK' country, 1 company_id from dual
union all
select 'Foo', 'USA', 1 from dual
union all
select 'Foo', 'AUS', 1 from dual
union ALL
select 'Foo', 'AUS', 1 from dual
union all
select 'Foo', 'USA', 1 from dual
UNION ALL
select 'Bar', 'UK', 2 from dual
union all
select 'Bar', 'USA', 2 from dual
union all
select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
FROM (SELECT
company_name,company_id,country,row_number()over(PARTITION BY company_name,company_id ORDER BY country) rn
FROM x)
/* Will show compan_ID twice if the country is repeated */
with x as (
select 'Foo' company_name, 'UK' country, 1 company_id from dual
union all
select 'Foo', 'USA', 1 from dual
union ALL
select 'Foo', 'USA', 1 from dual
UNION ALL
select 'Foo', 'AUS', 1 from dual
union ALL
select 'Foo', 'AUS', 1 from dual
union all
select 'Bar', 'UK', 2 from dual
union all
select 'Bar', 'USA', 2 from dual
union all
select 'Bar', 'India', 2 from dual
SELECT company_name,country,CASE WHEN rn=1 THEN company_id ELSE NULL END company_id
FROM (SELECT
company_name,company_id,country,dense_rank()over(PARTITION BY company_name,company_id ORDER BY country) rn
FROM x)
Cheers!!!
Bhushan -
My ringer only works on the phone. All other functions are silent and the ringer increase button does not add volume.
Had this happen today and 2X past as you discribed. A reboot (turn phone off and on) restored all sounds for me. The first time I can't associate w/ a cause but the second and third were just after listening to a podcast using the apple podcast app - the only app available for that. That's my story and for now I'm sticking to it.
Maybe you are looking for
-
DVD-Rs no longer load, DVD+Rs get error message
Hi everyone, I'm having some trouble with my Superdrive. Long story short, ever since I tried to use a DVD+R in the drive it's stopped recognizing DVD-Rs (spits them out without even loading them into the finder) and it refuses to burn DVD+Rs (I get
-
ThinkPad Twist S230u - Call using video doesn't work and the laptop make a lot of noise
Everytime I try to make any kind of call using video (through skype or any other software), the laptop just reset by itself. Also, everytime that I use the laptop it makes a lot of noite, it is uneareble!!! I would like to know what should I do, and
-
How can i print calender in colours instead of black and white
I use various colours for my calenders put when I print them out they all appear as black and white. Can any one help me or can it be done. Thanks
-
I uploaded my air to Mavericks two weeks ago. I just realized that I am missing imovie and iphoto!! Did they be moved to other place or this is a huge bug???? Rita
-
CRM sales setup of target for employee(BP)
Dear Friends, Can anyone help how to set the target of an employee(employee assigned as Business Partner in Production Client) in CRM Sales.What are the configuration required? Any pre requisites steps needs to be performed? Regards, Sayan