Information about WAD and Information Customer Patterns

Hi,
Please let me know if you have any idea about WAD and ICP delivered by SAP. Well anybody implemented SAP BW for Chinese customer please mail at [email protected]
Waiting eagerly for a reply.
Regards,
Joy

ICP are an add on the BW system. The BI template wizard for this avaiable ofr dowload from SDN.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bfec9790-0201-0010-cc91-b1b6efd0fbb3
Also look at the online documentation on ICP;
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d074408273d062e10000000a155106/content.htm

Similar Messages

I need information about ESS and Training and Work Experience

I need information about ESS and Training and Work Experience.
Anyone know if there is something inside of the component ESS about Training and Work Experience (infotypes 22 and 23)?
I appreciate information.
Thanks.

Marciano,
check this documentation
http://help.sap.com/saphelp_erp2005/helpdata/en/4d/c19ce6ef2842258283afc35a54172a/frameset.htm
Thanks
Bala Duvvuri

Need information about Garnishments and USA Tax (Very Urgent)

Hi SAP Experts,
Please send me some configuration flow (one by one steps) about Garnishments and USA Tax . Please let me know where exacttly i need to configure. Please send me one by one steps.
Thanks & Regards,
GKReddy.K

You might look towards forming a query that accurately restricts the identifying information
for rows you want to display in your view, and using that as a subquery within the view definition.
This can be described generally as:
CREATE OR REPLACE VIEW yourViewHere AS
SELECT
usefulData
FROM
listOfTables
WHERE
properlyJoined
AND someKeyColumn(s) IN (
SELECT someKeyColumn(s)
FROM listOfTables
WHERE properlyJoined
AND yourSpecialBusinessCondition(s)
Note that SELECT UNIQUE/DISTINCT is not needed for
the SELECT in the subquery ... the IN operator will
do well enough without the extra work performed by UNIQUE.
Usually good to look at the query plan used for each part of the query.
HTH
Bob Grove

Need Information about IP21 and IHistorian

I'm need to connect IP21 plc and IHistorian db.But I don't have that much knowledg about these two things.Can I have document or link which provides infomation about IP21 and IHistorian or else any depth explanation about these two. Please provide me the necessary information.
Thanq,
Rakesh

Hi,
Pls chk this link;
xMII - IP21 interface
xMII - IP21 interface
Regards
CSM Reddy

Nation advanced search on my IMac, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of

I just caught a thing called nation advanced search on my iMac computer, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of it? What does can it do to my data and is it really a spyware? I just found information in youtube, that it is a spyware, and that it has to be removed, but the information they give for the removal is just working for PCs not for Macs.
Please help!

Thank you all for the friendly assistance provided.
I have found a solutiton to the problem I was having. I hope that many more can benefit from the information I will provide.
I started at Finder, then went to GO selected COMPUTER and then Machintosh HD, then Library, Scripting Additions folder and trashed all that was there. This is what worked for me, if you choose to not delete your content its up to you. Happy Computing.
God Bless!!
This solved my question

I know the ipad to download content. Ex: Facebook, asking me much information about me and where I live. I want also to know if the download I came to pay bills than download

I know the ipad to download content. Ex: Facebook, asking me much information about me and where I live. I want also to know if the download I came to pay bills than download

I'm sorry, I don't understand what you're asking.
Facebook always wants to know too much, but you can ignore those prompts, or lie to it if you want. You'll notice that a lot of people work at 'noneofyourbusiness'.

What is the latest information about hardware and ...

Hello everyone,
Please tell me, What is the latest information about hardware and software upgrade...?

That would be the Mac Pro 4,1 model released in 2009. I would add that if you are buying one, that model is superior to the previous 2008 model and allows much larger and cheaper memories.
Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8, 10.8.3
11D2001, 12A269, 12D78
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129

Information about Incoming and outgoing message in BizTalk MessageBox DB

Hi,
Can we have some query in sql by which we can get the information about incoming and outgoing message in our message box DB ?
Information like how many message we receive so far,how many messages get suspended,how many message is successfully send.
Any kind of help would be appreciated .
Prakash

Hi Prakash,
Rachit already provided the links which should help, also Admin console can be of help , where you can query using Group hub page .
BizTalk Server: Tracking Data Using BizTalk Admin Console
BizTalk Server: Checking Tracked Data Using Admin Console
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server: Multiple XML files to Single FlatFile Using File Adapter

Comprehensive Information about User and Objects

Hello,
This is on 9i
Which tables /views I can use to derive following information?
1.Owner Name/User Name
2.Objects owned by the user
3.Privileges assigned
4.Roles assgined
5.Whether user has admin privileges
6.whether user is grantor to other user
7.whether user is grantee by other user
8.tables privileged
9.columns privileged
10.whether user has ISDBA/ISOPER roles
11.recent login attempts
12.last password reset date
Thanks,
R

This is kind of an odd forum post, especially given that you listed twelve general questions. It almost seems like a homework assignment :)
With that in mind I'll give you the general instructions that you should follow before posting any other questions on the forum.
Go to http://tahiti.oracle.com
Then click on your version. This will bring you to all the documentation for the version you have chosen. In this case the following books may be a good place to start:
Database References (this lists all the views in the database)
Administrator's Guide (will have information about permissions and other administrative tasks)
Security Guide
HTH!

How can i inform customer when an idoc fails?

Hi folks,
How can i inform customer when an idoc fails?? Is there any procedure where customer is informed immediately through mail???
Looking forward for your valuable suggestions to solve this..
Cheers,
Ram.

Go through the Link.
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/frameset.htm
It explains about active monitoring. You can schedule a Report providing A variant. In the variant you can select the Message type, Recepient type Etc and the USER to which the notification has to be sent and the error type for which the notification has to be sent.
Reward Points if useful
Regards,
Abhishek

How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it. i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this. have i inadvertently clicked on something to turn this facility off? i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

Which version of photoshop are you using?
After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

Frustrating And Poor Customer Service

A few weeks ago I made a change in the equipment I rent. I had one HD set top box, one digital adapter and one Standard set top box. The standard box was supposed to be free for as long as I kept Verizon TV service but now Verizon seems to want to charge me for it. The changes I made seemed simple enough. I returned the digital adapter and in its place I rented another HD box. When I logged into my account a couple of days later I went to my equipment list and noticed that there was now a charge associated with the SD box. I called customer service and spent almost a half hour either on hold or trying to explain my problem. Finally the customer service rep saw what I saw and the final explanation that I got was that when I made my equipment change "the computer flushed out the grandfathered free SD box". I then asked that they remove the charge, the deal was that this box was free for as long as I kept Verizon service. The answer I got to that was that she couldn't. I told her that that was not acceptable and that there had to be someone that could do something about it, by now I was getting a little annoyed about the whole thing. She said she would connect me to Customer Retention. OK, this guys job is supposed to be to keep me happy and a customer. So now I explain the whole thing again but this time all he keeps saying is "I don't see where your being charged for the SD box". I try to tell him where to look but all he keeps saying is that he dosen't see a charge. I ask him why can I see it and he dosen't? And again all he says is don't worry you won't be charged. I then ask him for his name, phone number or any way to contact him so I don't have to go through this again when I get my bill and he says, "don't worry I'll be watching your bill". I ask him again and he says that he made a note and will be watching for my bill to assure that I won't be charged. Well I got my bill this weekend (the bill that never stops going up) and I'm being charged for the SD box, not only that but also a 5 day partial bill for last month too. This whole ordeal took me over 45 miniutes and to no avail. This shouldn't have happend in the first place but I do understand that mistakes can happen. What I don't understand is that after spending all that time I couldn't get a name, number or case number but was left with nothing to do but go through the same thing again. I also didn't appreciate the lip service I was getting from the Customer Retention rep. I could tell by the way he was talking that he had no intention of bothering with this but I decided to give him the benifit of doubt. Then I stumbled across this forum. I was hoping someone might have some advise for me in moving this along.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Basic questation about VSS and windows backup

hi all, basic questation about backup and VSS
Environment:
windows 2008r2,NAS backup disk connected with iSCSI
If i create in the windows backup server job , where i backup disk D , target is NAS disk and start it . Windows backup is requester and is created shadow copy . This shadow copy is created in the disk D or in the NAS disk ? If in the disk D is created for
everyone application snapshot ? After created snapshot the windows backup copy data from snapshot to windowsimagebackup ? And If windows backup create different snapshot how detect which files is changed ?
thank you
Falcon

Hi,
Windows Server Backup stores backup versions in volume shadow copies. After the data write is complete, Windows Server Backup creates a shadow copy of the volume where the backup is stored using Volume Shadow Copy Service (VSS). This shadow copy retains the
state of the storage volume as a “backup version” or “point-in-time” of the backup and must restore using this backup version.
You could refer to the article below to know the steps of a back up operation performs:
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Windows Server Backup uses Volume Shadow Copy Service (VSS) and block-level backup technology to back up and recover your operating system, files and folders, and volumes. The Volume Shadow Copy Service is used to differentiate between backup sets, and to track
where the various blocks are being written to within the shadow copy storage.
For more information about the incremental backup technology, please see:
Learn more about system image backup
http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx
Backup and Recovery Issues with Windows Server 2008 (Part 2)
http://www.windowsnetworking.com/articles-tutorials/windows-server-2008/Backup-Recovery-Issues-Windows-Server-2008-Part2.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can anybody explain briefly about CTS and SLS ?

hi gurus all ,
could u pls. get me some idea about CTS and SLS ?
where it will be useful?
How do we generate reports in SD?
and what is the process of report generation?
How can we do the partial deliveries and give some steps to configure in sap?
If the client logon screen deleted, requirement is urgent, then what will we do?
hope will get me the above information in detail:
thanks to all gurus
vasan

Hi,
Reports are basically what the client uses to run his business to understand what is happening. In sap all the data is stored in the form of tables. So when we want a report say to show the sales happd over the last 3 montsh or an year over some divison for a product can be fetched from the database thorugh these tables.
ex some standard reports
SAP SD Reports: T-Code: SARP
All Standard Reports which are avalable are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hirarchy - VDH2
Disply Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbond deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant congiruration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
with regards
Rajesh

Misuse of clause in extended warranty of laptop by service centre to harass and cheat customer

Please read it completely as this is from a Frustrated, Harassed, Cheated customerThis is with reference to case ID: 4756281406-471. The laptop against this case ID is under extended warranty. This laptop was given for repair to MI road Jaipur service centre of HP on 20th July 2015.My complaint is regarding the way your authorised service centre treats customer, as In spite of everyday following them up, till Saturday i.e. 25th July 2015 they kept on saying that mail regarding motherboard change has been sent & acceptance from authorities is still awaited. After chasing thru the call centre, very conveniently unilaterally they put the blame on customer that extended warranty is voided as they found liquid spillage on mother board. Because for the laptop under extended warranty your service station does not tell or show to customer that laptop has been mishandled by customer when they are accepting the laptop for repair. Subsequently after keeping the laptop at their service station they conveniently later blame customer for mishandling under the clause that, the standard warranty does not extend to any HP Hardware Product that has been damaged or rendered defective as a result of accident, misuse, liquid spills, abuse, contamination, or other external causes.Poor honest customer like me who has not mishandled the laptop feels cheated. The service centre did not show/tell me any kind of mishandling when they received the laptop from me and then after keeping the laptop in service station they unilaterally decide that customer has mishandled.For laptop under extended warranty when the service centre know that such clause exists why they are not making the provision of showing at the time of accepting the laptop from customer, that the fault is due to mishandling of laptop by customer.I also forwarded this information to [email protected] but did not receive any reply from them. Is this the way HP treats its customer that they do not have courtesy to reply customer mail.I will be using a few harsh words against your after sales service setup. I will request you to pardon me for that. May be you are not aware of these activities being done at your service centre. As an honest and aware customer I would like to bring certain aspects to your notice.I have never mishandled this laptop. Your service centre is telling a lie. In case any mishandling has been done it is at your service station. Please take action to stop this kind of fraudulent activities at your service centre. This kind of harassment to customer will make customer run away from hp Laptops.For laptop under extended warranty please make provision at service centres of showing at the time of accepting the laptop from customer, that the fault is due to mishandling of laptop by customer. Otherwise stop such extended warranty schemes. I purchased your laptop only due to extended warranty scheme. If this scheme was not their then I would not have purchased hp laptop.I know HP is a big company; they do not bother about small customer. But still I would like to hope you will take out some time to look into this case specifically. My laptop is still at the service station in Jaipur and I hope you will do the needful to repair my laptop free of cost as it is in extended warranty. I did not mishandle laptop and your service centre did not show/tell me of my mishandling at the time of receiving laptop. From Frustrated, Harassed, cheated customer

Hi , I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.

Information about WAD and Information Customer Patterns

Similar Messages

Maybe you are looking for