Information message in infoset query.

hi all,
i have added a field into the infoset query adn im using s_pho_48000513 . my probelm is when ever im opennig the query im getting information message as some selection fields are not available.does any have idea why im getting this message ..where i went wrong in ading the field to infoset.what check should i do.please suggest.and another thing when im doing switch off object selection from extras im not getting this information message but this field is comming in selection fields from infoset with default selected with enable mode and all other fields selected with disable mode.
any inputs is apreciated..
regards,
suha

Remove those fields/Infotypes from the infoset with the help of SQ02 from that infogroup
Thanks
Jaydeep jadhav

Similar Messages

  • Infoset query with KNB1 customer's ADRC information

    Hello,
    An explanation into the problem:
    I'm trying to create an infoset query with KNA1, KNB1 and ADRC which would do the following:
    In KNA1-SORTL we hold customer numbers which can be found from KNB1. This query should:
    Display KNA1-KUNNR and relevant address data for this customer via connection KNA1-ADRNR and ADRC-ADDRNUMBER. Then it should check KNA1-SORTL- field and if it corresponds to KNB1-KUNNR, it should go back to KNA1 with this KUNNR and display all this customer's relevant address data via this customer's KNA1-ADRNR to ADRC-ADDRNUMBER.
    I'm relatively new to infoset coding and ABAP in general, plus I'm self- taught so please bear that in mind.
    I'll give an example as to what I've managed to do so far. In SQ02 I joined tables KNA1(left outer join)KNB1 and KNA1(join)ADRC and created an extra field ZADRNR to see if I could display the ADRNR for the customer number found in KNB1.
    Something along the lines of:
    IF KNB1-KUNNR = KNA1-SORTL.
    SELECT SINGLE ADDRNUMBER FROM ADRC INTO ZADRNR
    WHERE ADDRNUMBER = KNA1-ADRNR.
    ENDIF.
    Obviously this doesn't work. Pseudocode would look like this:
    Check field KNA1-SORTL
    IF KNA1-SORTL = KNB1-KUNNR THEN
    GO BACK TO KNA1 with this KUNNR and display it's ADRC.
    KNB1 sadly doesn't maintain an ADRNR of it's own, or this would be much simpler.
    Any help or advice is much appreciated, so far I've only been coding a few lines in infosets with ABAP so I'm not all that familiar with it. I've managed to create several queries through trial and error, mostly, and this forum and it's articles have helped a great deal.
    Please let me know if I should provide any additional information, and my apologies if I posted this in the wrong forum area.

    Hi Lalit, and thank you very much for your reply.
    Unfortunately excluding space entries in selection screen wouldn't solve the issue, since we have KNA1-ADRNR for each entry, it's just that it would be different for customers found in KNB1.
    I could probably solve this by making two separate queries and working on them in excel and that way we would have the necessary information.
    But in order to do this in SAP seems to mean that I have to write a custom report. For that, it seems I'll be spending New Year's eve learning how to ABAP
    Thank you for your help, at least we don't have to struggle with finding out a way to do this via queries so we'll just find alternative means for this.
    Thanks again and have a happy new year!

  • Infoset query with cero values

    Hi
    I have an infoset query that reads the information from an infoset. The infoset query is able to read the values, because it shows me values, but everything is cero, although I have values different from 0.
    But if it didn`t find values it would tell me a different message as "No application data found" or something like this.
    Then the problem is, my infoset read values, but everything that shows me is cero, and that´s not true.
    Thanks and regards
    SEM SEM

    Hi,
    What do you mean with the join condition ?
    I have an infoset query with only one ODS inside. I didn´t want to build a query directly to the ODS as I did´t want to mark the flag available for reporting in the ODS, as it already had very importat data and I didn´t want to damage the ODS  data. That´s why I have built and infoset query with one ODS inside, and in this case I don´t understand the join condition....
    Regards
    SEM SEM
    Does anybody know something ????
    Regards
    SEM SEM
    Message was edited by:
            SEM SEM

  • Adding extra Field to a Infoset Query

    Hi Experts,
      I need to add an extra field to a SAP Query(infoset). SInce the code uses a dynamic program call, how do I add my code . Can I have some example code used to add extra field to a SAP Query

    Hi Mithun and gurus,
    My code is working now for these 3 new additional fields. The thing is it works if these fields were selected solo. but if all of these 3 or 2 of it simultaneously, an error occurs.
    Error when generating the report (see long text)
    Message no. AQ_AD_HOC221
    Diagnosis
    The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
    Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
    If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
    If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
    Procedure
    If the selection screen is too large, you need to reduce the number of your selections.
    Make sure that the assigned InfoSet is correct. The name of the assigned InfoSet is stored in the menu option 'Extras -> Template Information'.
    Output at least one field. Otherwise you will not be able to save or generate reports.
    If you do not have this problem, execute the query using the 'Output' function.
    Otherwise, there is an error in the InfoSet Query.
    >>>I checked and the code seems fine at least. I think there must be something I need to configure. I tried the SEQUENCE for Codes but nothing happens..
    I hope you could helop me with these..Thanks a lot!!!

  • InfoSet Query - Long Description while selecting variable values

    Dear Experts,
    We have an InfoSet Query on different InfoObjects like 0CUSTOMER, 0CUST_COMPC etc and the common link between these InfoObjects is CUSTOMER.
    We have a variable created on this CUSTOMER. The requirement is that when this query is executed, user should be able to select a value of Customer (F4 help) and at that time, he should be able to view both Key and Long Text of Customer.
    We know that if we change the CUSTOMER InfoObject --> BEx Properties tab, then we can display Long Text and Key in Query Selection Screens. However we can not do that because it would affect all queries in which this InfoObject is used.
    If we go to Query Design, and choose "Long Text and Key" in properties of Customer, then system displays Long Text and Key of Customer but after the report execution is done.
    We want to display the Long Text of Customer to User at the time of selection and that too without making any InfoObject level change.
    If it was InfoProvider, we could have done it using "Provider specific properties of Characteristic" option. But this is InfoSet and that option does not appear here.
    Please suggest the solution.
    Regards
    P

    Rohit,
    Are you looking to display long text for infoobject instead of short description ?
    Then go tp rsd1>infoobject>display/change-->master data/texts -->text table properties -->check long text exists.
    It supports a long text field with a length of 60 characters
    Activate the infoobject
    --Doodle
    Message was edited by: Doodle

  • Infoset query ('At Selection-Screen') - Urgent

    Hi All,
    The below code for selection criteria 'At Selection-Screen' for an infoset-query works ok, but i find 2 problems, can someone help.
    1. When user presses F4, i wanted the output to display
       SG Singapore
       IN   India
       But at the moment it just displays
       SG
       IN
    2. If the user enters any other value apart from the above 2 i do not want the query to execute, instead show something like enter a valid value. But at the moment if i enter another country code manually just to test eg: US, the query runs with this selection which i do not want.
    Hope my problem is clear, await inputs.
    Code:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR VEN_CTY-LOW.
            IT_LAND-VEN_CTY = 'SG'.
            IT_LAND-LTEXT   = 'Singapore'.
              APPEND IT_LAND.
            IT_LAND-VEN_CTY = 'IN'.
            IT_LAND-LTEXT   = 'India'.
              APPEND IT_LAND.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          RETFIELD   = 'VEN_CTY'
          VALUE_ORG  = 'S'
        TABLES
          VALUE_TAB  = IT_LAND
          RETURN_TAB = IT_RETURN
        EXCEPTIONS
          PARAMETER_ERROR = 1
          NO_VALUES_FOUND = 2.
    IF SY-SUBRC = 0.
        READ TABLE IT_LAND INDEX 1.
        MOVE IT_RETURN-FIELDVAL TO VEN_CTY-LOW.
    ENDIF.

    Hi vivek,
    for the 2nd problem,
    create a range for ingapor and india say r_range.
    and
    r_range will have two values say india, singapore.
    loop at VEN_CTY.
    if ven_cty not in r_range.
    display error message.
    exit.
    endloop.
    try this and let me know.
    reward if helpful.
    thanks .
    ranya

  • Information message "Down Payment more than invoice amount"

    Hi Experts,
    After creating down payment request while making down payment,one information  message shows in status bar "Down Payment amount is more than invoice amount"
    can anyone tell me why that message popup everytime?
    Thanks in advance
    Sanjay

    Dear,
    Ideally this message should appear at the time F-54 transaction when down payment is greater or lesser than invoice amount.
    But as you said it is appearing at time of F-48 so please check purchase order is entered and invoice has been done for that invoice with variances.
    If query does not belong to any of above, please elaborate the scenario and also provide message number.
    Regards,
    Chintan Joshi

  • Infoset Query -- Selection Screen Text

    Dear experts,
    I hv created an infoset query. every thing is working fine except the selection screen text.
    It is coming like
    "Date on which the record was"    instead of
    "Date on which the record was created".
    Is there any way we can manage the selection screen texts in infoset query.
    Regards,
    Jaspal Kumar

    Hello,
    In the Infoset, click table -> field, double click on field and you see the field technical & label information, change the Field label there.

  • Infoset Query Returns Wrong Data

    Hi there exports,
    I created a infoset query based on 3 DSO's 0PUR_O01 (Purchase Order Items), 0PUR_DS03 (Purchase Order Item Schedule Line) & a Z-DSO (Material Consumption).
    I need information by PO Number (Item, Material) and the total consumption for that material from the Z-DSO irrespective what the item & PO Number is.
    My link to Z-DSO is material & plant. My problem is that the info from the orther 2 DSO is triple when I run my query.
    Any suggestions?
    Thank you
    Dirk

    Hi,
    This issue arrises due to the infoset property, ie. Infoset provides intersection of data.
    So for a single combination of material and plant in Z-DSO, there might be multiple (here 3)records in other two DSO so you get the triple amount in Query.
    Inorder to overcome it you must ideally join the DSO in a infoset based on the same key fields..
    Hope it helps..
    Regards..
    Umesh.

  • InfoSet Query modification error

    Hi,
    I am trying to modify a InfoSet Query in SQ01 developed by a SD consultant last time. I already assigned my user ID in the User Group (in SQ03) which is referred by this Query. At the same time, I also assigned the Change Authorization to my ID.
    After that, I modified this InfoSet in the SQ02 to add on 1 table and the Save is successful. Then I try to modify the display layout of the Query in SQ01. When I save it, it give me a message "The query is locked for changes by SDUSER". The ID SDUSER is used by the SD consultant last time. Then the modification is not saved.
    I already checked in AL08 and also SM04, and found that this user is not log in at that time.
    I already done whatever I know to try to solve this problem but I still can't settle it. Can anyone please help me on this? Why can this happen? How can I unlock it?
    Thank you.

    Hi,
    the lock was made by SDUSER when he created the querie. It's an option in the first screen "Title, Format" (specials attributes). When this option is select, only the specific user can change the query (sometimes some modifications are allowed by other user's in specific conditions).
    The only way of resolving the problem, is the SDUSER to disable that option from there. After that you will be able to change it.
    If that user doesn't exists, you must call the Basis team to create the user again, log on, and change the option.
    Regards,

  • Wrong number of members in a TG. Infoset query vs Segment Builder.

    Hi gurus,
    I've discovered an issue in our CRM System (BBPCRM 600) and I have no idea of how to solve.
    For our marketing segmentation, we've created a Infoset (SQ02) with a link between standard (BUT000, CRMD_ORDERADM_H, CRMD_OPPORT_H) and custom tables. Over this infoset, I've created an infoset query (SQ01).
    During our test, we've noticed the following: Using the same filters in segment builder and in infoset query, results are not the same!! Segment builder adds more partners to our TG's and even these partner doesn´t met the filters!
    For Example:
    Using POSTING DATE from CRMD_ORDERADM_H as filter: From 01/01/2014 to 01/312014.
    Using infoset query, all partners I'm getting are correct, all of them have CRM operations for this date interval.
    However, using this same filter in segment builder, the resulting list of partners has one more than query list...and this partner doesn´t have any operation for the chosen internval.
    How is this possible? Why results are not the same? Any ideas? Is there any BADI for segment builder that must be checked?
    A lot of thanks!!
    Message was edited by: SAP _ES

    Solved!!
    I was wrongly using AND/OR options to add filters in the segmentation tool...ups!

  • Add field in sq01, infoset query.

    i am trying to create a virtual field in sq01. i am creating a infoset query where i want to add two fields and need to displayed in the report. how can i do that without enhancing the infotype? i just need to add two fields and need to be displyed in third field. i want to add some logic of addition to those two fields and the result need to be stored and displayed.
    Message was edited by:
            shahid mohammed syed

    Hi ,
    I have got a query in AD-HOC query.
    After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
    What I have done is :
    1.Created a user group through SQ03
    2.Attched user to My user group
    3.Created an infoset using join table functionality(SQ02).
    4.Saved and generated the infoset
    5.Added the user group to the infoset and than run the ADHOC query.
    The table I have used to join is all PA table (For test pupose)
    Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
    Result:The adhoc query does not gives any out put instead it says no data could be read.
    Could you please tell what else I need to do so that the custom infosets gives an out put.
    Will greatly appreciate your help.
    Thanks and best regards
    Rajeev

  • Question about infoset query with code

    Hi experts.
    I always appreciate your help. Today, I have some problem. I made infoset query using SQ01 and got some data. Those data include WBS no but some of them didn't. So I tried to put some code into the infoset query that any data has not WBS has some value, for example 'X', in WBS no field.
    I needed to know what field or table I should control to display value 'X' in WBS no field in case that WBS field has no value.
    I tried to put code at "END-OF-SELECTION(before display)" and control %dtab. But I met error message there is no such table %dtab. So, I define %dtab then during runtime, I also met error message %dtab has already been defiend.
    How can I do? Is it impossible thing?? I'm wating for your answer.
    regards.

    Hi, if you just want to fill the field if it is blank, you can do this in the Record Processing Section.
    I'm not familar with the WBS number, so for this example, I will fill the BISMT in MARA during the "Recording Processing" Section.
    if mara-bismt is initial.
    mara-bismt = 'X'.
    endif.
    Regards,
    Rich Heilman

  • Transport of infoset query

    Hi ,
    while i am doing transport in infoset query,i select the infoset and query and next i wnt to transfort and metioned there requried names of infoset &query. i done every thing ok but in SE10 transport organizer ...displaying request  is wrong missing the system name and request number..
    on this topic any body help me its urgent foe me..
    thanks ,
    good year..

    Hello Good year,
    Have you attached the objects to a transportable package?
    When you created the transport request, did you make a note of the request number, did the system give any errors or messages while writing the object to the request?
    If you do know the request number, goto SE10, and then press F5 and fill your request number and press enter, and then you should be able to see your request.
    Cheers,
    Sree

  • Additional fields in infoset query can not be used as datasource fields

    I create one infoset query with additional fields (using ABAP code) in R/3. When I create datasource RSO2 using this infoset query, system only show all fields without additional fields that I enhanced in infoset query. Does that mean we can not get additional fields information in generic datasource creation that we enhanced in infoset query?

    dear Awa,
       you are enhanced some fields in r/3.right that fields are  shown in
    rsa6 select your data source click on display your datasource then select
    extract structure its shows how many fields are haveing particular
    datasource .or otherwise goto rso2 select your data source display
    double click on  your extractstructure  its show how many fields haveing
    the particular datasource. check the Rsa6 what ever fields you newly added that field default hide mode
    you remove the hide tickmark.

Maybe you are looking for