Information of sales org

Hi, Experts.
How can I find salse organization information? Such as full name of sales org., address, tel. and fax. etc.

Hi,
Using T.code SE16, go to table TVKO,
Give the Required Sales Orgnization and execute that,
In that You can see a Field ADRNR ( Address) Number.
Now goto table ADRC (using T.Code SE16), and give the ADRNR value in that and Execute the table.
You will get total information pertainaing to that sales Organization.
Hope this will help.
REWARD IF HELPFUL
Regards,
Praveen

Similar Messages

Which table could i get the information of Sales org. and DC relationship?

Thanks!
And could you tell in what way could i found the corresponding table corresponding to any SPRO transactions??
Thanks

Hi,
In the SPRO setting Press F1 and check technical details,you will find the corresponding table.
Second way is if you do any changes in settings,then the request which is getting generated...in that request you can find the table name as well
Reward points if useful
Regards,
Amrish Purohit

Fld defaulting to specific sales org for user even though Parameter not set

Hello,
I have a problem, for a specific user, where the sales org field is defaulting to a specific value even though his parmeter ID is not set for VKO. For information, the sales org value no longer exists (invalid). More over, the problem exists only for a particular transaction, MM41, MM42 and MM43. When he tried VA01 the prolem of the sales org value defaulting does not happen.
I have tried MM41, 42 and 43 with my user ID and it works properly. We use CUA but parameters are locally maintained in each child systems as this is logical. i reset the buffers (/$sync) just to be sure (as this is not a live system) but this does not help.
Any ideas?
Regards,
Prashant

Hi Prashanth,
at our end we do not have a retail-specific maintenance function, but i guess the problem arises when the user has entered the sales organization and saved it as " default areas of validity", try using a blank entry and then click on the tab for default areas of validity - it "could" solve the problem

How to delete the sales org information from BP Master Data in SAP CRM 5.0

Hi Guruu2019s
How to delete the sales org information from BP Master Data in SAP CRM 5.0
Thanks...
Mahesh Pasupunuri

Hello
There is a report attached to [SAP Note 725857|https://service.sap.com/sap/support/notes/725857] that performs the deletion.
Regards
Joaquin

How to get Sales Division, Sales Org information in BackendCRM class

Hello experts,
I want to get the Sales division, sales org and sales distribution channel information in BackendCRM class.
I know i can get these in action classes using BOM, shop methods etc., but i want in BackendCRM class.
is this feasible? if so, could someone throw pointer on this. Appreciate your help.
Thanks in advance
Regards,
Satish.

Hi Sathish,
Thanks for your response..
I have analyzed this and found that all sales info we can get from IPC document object using the following code:
               theDoc.getHeaderAttributeBinding("SALES_ORG");
               theDoc.getHeaderAttributeBinding("DIVISION");
               theDoc.getHeaderAttributeBinding("DIS_CHANNEL");
Thanks,
Satish.

Sales report per year for copmany code & sales org wise

Hi all
Does anybody knows how to take total sales report per year for copmany code & sales org wise
Please advice me with Tcode if it's possible.
Thanks a lot in advance!
U.maha

Hi,
Check your configuration for SIS.If it is not there maintain settings for SIS.
SPRO-Logistic Information system-Updating-Updating control-settings:sales
You also need to run these T-codes. OLI7,OLI8,OLI9
(Test first in quality client).
Thanks,
Vrajesh

We want the accounts to be posted to 5310 and sales org xx70

Hi All
In april2008 invoice was created for company code 5610 and sales org xx60 now in Jan 2009 they have seized this company code 5610 and sales org xx60 and started operations on 5310 with sales org xx70
Now for business reasons (self billing) they are doing credit memo based on the old invoice which was created in April 2008 ... in the credit memo it is copying all the information for 5610 and sales org xx60 and posting accounts to sales org xx60.
We want the accounts to be posted to 5310 and sales org xx70
Please help me.
Rajendra Prasad

Hi Hari Challa
Thanks for the help but i have a dought
can you please clarify under which conpany code (old one or new one) , that i should maintain account determination please. can you please explain in detail.
for my senario
thanks in advance
Rajendra prasad

Sales org roll out doubt

Dear Peers,
My scenario: CRM roll out for DE.
first CRM was implmented in US and the rollout is for DE. In R3 customer no:10 has assigned to 4 diff sales org included US and DE. Now i started the Initial load for the DE customers from R3 to CRM and the error i got is SYSFAIL and the detail is "Customer 10 is already assigned to a Business partner" and BUPA_MW_EXCHANGE103.
in filter settings R3AC1 i am maintinaing KNVV and KNVP tables.
my question is if do initial load for roll out , only aditional information i.e. Sales org details can be updated for the already existing customer in CRM?
i.e.in my scenario the customer 10 is already in CRM now only the DE sales org has to update for the customer 10. in future if we go for rollout of another country that sales org details has to be updated to the existing CRM customer will it be possible?
Thanks,
K
Edited by: kesava9 on Dec 13, 2010 2:52 PM

Hi,
Normally we only do Initial download once when we set up the system for the first time. after that all changes should be downloaded automatically needless of the sales org.
Now I would recommend to do a request download instead of an initial download, since updates for that customer will be updated automatically for each rollout scenario if the customer is already there. if the customer is not there it would create a customer and updates the sales org details as well.
Don't know if i answer your question correctly.
Hopeit helps.
Regards
Sidd

Sales Org assign to Plant

Hello Everyone,
I would need your help to confirm the following is true or clarify some doubts:
1. I understand that Sales Org (SOrg) is assigned to Plant , thus : Sorg := Plant
2. Does this also Implies : SOrg + Distr Channel := Plant? Not necessary right? For this case, its not true / an invalid assignment right?
3. Plant is assigned to Sales Org + Distr Channel. Is it implicit that the Reverse is true? Is it implicit that Always the reverse is true, in general, for Any other organizational unit assignment relationships?
I believe that Sales Org := Plant and Plant := Sales org + Distr Channel and the reverse of each of both relationships are not true. Please confirm.
4. Sales Org is Assigned to Plant but Plant is not Assigned to Sales Org right? Plant is also higher level in the organizational structure than Sales Org right?
Thanks.
Sincerely
Bass
SD Newbie
Edited by: Bass Aton on Jan 2, 2011 5:20 PM

Hi,
I guess this will help you
How to Configure a New Plant in SAP?
Plant 0001 is the SAP defaults provide for your reference.
OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes) Most company take the SAP recommended choice - Value Material Stock at Plant level Value Material Stock at Plant or Company Level If you valuate material stocks at plant level, the plant is the valuation area. If you valuate material stocks at company code level, the company code is the valuation area. The decision you make applies to the whole client.
OX10 - Create / Change / View Plants
OVXB - Create / Change / View Division
OX18 - Assign Plant to company code e.g. 0001 - 0001 - All Plants Px1 - Plant Px1 Px2 u2013 Plant Px2
OX19 - Assignment of company code to the Controlling Area
OB38 - Assign company code to Credit Control Area
OMJ7 - Assign business area to Plant/Valuation area and division e.g. Plant Px1 - Business Area Bx1 Bx2 Assign Valuation area to the Business Area .e.g. Valuation area Vx1 - Business Area Bx1 Business Area Bx2
OMS0 - Assign Factory Calendar to the Plant and Business Area The plant plays an important role in the following areas: If you want to create by copying from existing plant: 1. Copy existing plant A to new plant B. All of plant Au2019s data in throughout the IMG will be created/copied for plant B. In some cases with plant A data that is not desired. In step 3 you must go through and correct invalid entries 2. Correct address information 3. Correct data copied to plant B as plant A (a) In Sales and Distribution -> Shipping -> Picking -> Determine Picking Location -> Assign Picking Locations (OVL3), delete entry where Shipping Point = plant A and Plant = plant B and press save. (b) In Sales and Distribution -> Shipping -> Basic Shipping Functions -> Shipping Point Determination -> Assign shipping points u2013 wherever plant B is found the shipping point is plant A. This must be changed to plant B. (c) In Enterprise Structure -> Maintain Structure -> Assignment -> Sales and Distribution -> Assign shipping point to plant u2013 delete plant B shipping point from the plant A assignment. (d) In Enterprise Structure -> Maintain Structure -> Definition -> Sales and Distribution -> Define, copy, delete, check shipping point u2013 copy shipping point plant A to shipping point plant B. Correct the description in the define section of this node. (e) In Sales and Distribution -> Shipping -> Picking -> Determine Picking Location -> Assign Picking Locations (OVL3), copy plant A entry to plant B entry, changing all data to plant B. (f) Check with Reorder buying group to determine MRP controllers for new plant. Remove plant A MRP controllers from plant B, and add controllers received from reorder buying group. IMG is Materials Management -> Consumption Based Planning -> Master Data -> Define MRP controllers (g) Define special procurement. IMG is Materials Management -> Consumption Based Planning -> Master Data -> Define special procurement type. (h) OMGN u2013 Assign customer in u201CSet up stock transport order u2013 [Plant]u201D. OMGN u2013 in u201CSet up stock transport order u2013 [Purchasing Document type]u201D; an entry was created for source plant B and plant A, this entry should have a UB order type and the check box should be off. Each plant needs a plant B UB entry created. (j) OMJ3 u2013 Delete incorrect entry in print parameters. Remove entry where plant = plant B & storage location = plant A. Create entry for plant B storage location B (k) Verify entry for new plant exists in OVLT picking output (l) Verify entry for new plant is correct in VP01 4. Manual configuration (a) Create plant customer number and assign to plant in OMGN. (b) OMJ3 u2013 set correct printer for plant B (c) OPK8 u2013 Set printer for plant for list LG01. This is for production orders. (d) Output determination OVLT (set printer), In addition to above, other changes based on customization in your installation needs to be done as well. Plants Definition : /NSPRO-IMG-Enterprise Structure-Definition-Logistic General-Define,copy,delete,check plant-Define Plant (In this, we are defining plants(s) under company which is defined earlier) /NSPRO-IMG-Enterprise Structure-Definition-Logistic General-Define,copy,delete,check plant- copy,delete,check plant-F6 to copy org. object from plant 0001 to defined plant(s). Storage Location : /NSPRO-IMG-Enterprise Structure-Definition-Materials Management-Maintain Storage Location-New Entries (Define required storage location(s) under different plant(s) ) /NSPRO-IMG-Enterprise Structure-Definition-Materials Management-Maintain Storage Location-Storage Location Description---- New Entries ( enter here addresses of each plants)
Thanks
Anil Hooda

How to get sales org. field value in CUSTOMER_ADD_DATA~SAVE_DATA ?

Dear Guru ,
The requirment is we send some information to external email system when user save the customer master data ( XD01 , XD02 ) .
I try to use badi CUSTOMER_ADD_DATA~SAVE to satisfy this requirment , but i can't get the Sales Org value ( KNVV-VKORG ) in this badi in XD02 ...
Has someone guide me how to do that ?
Below abap code can get the Sales Org value in tcode XD01 , but not in tcode XD02 .
        DATA : lv_knvv type char30 value '(SAPMF02D)KNVV' .
        DATA : l_vkorg type vkorg .
FIELD-SYMBOLS : <fs_xknvv> type knvv .
ASSIGN : (lv_knvv) TO <fs_xknvv> .
* Now i have the Sales Org in XD01 !
      l_vkorg = <fs_xknvv>-vkorg .
Thanks .
Best Regards,
Carlos

DATA :
         lv_knb1 type char30 value '(SAPMF02D)KNB1' ,
         lv_knvv type char30 value '(SAPMF02D)KNVV' ,
         lv_kna1 type char30 value '(SAPMF02D)KNA1' .
FIELD-SYMBOLS : <fs_xknb1> type knb1 .
FIELD-SYMBOLS : <fs_xknvv> type knvv .
FIELD-SYMBOLS : <fs_xkna1> type kna1 .
ASSIGN : (lv_kna1) TO <fs_xkna1> .
ASSIGN : (lv_knb1) TO <fs_xknb1> .
ASSIGN : (lv_knvv) TO <fs_xknvv> .
Edited by: Carlos Zhang on Dec 17, 2010 3:25 PM

Sales Org Table

Hi,
I've a requirement to create an ABAP report to determine Address Details (PO Office, Region etc.) of an Employee assigned under a particular node in Sales Org.
Could anyone suggest me how can I extract this information? Any FM, BAPI or Table etc. which I can use?
Regards,
Vikrant.

CALL FUNCTION 'RH_STRUC_GET'
    EXPORTING
      act_otype       = 'S'            "For Position IDs in Org unit
      act_objid       = objid          "Position ID number
      act_wegid       = 'DISPO_BP'
    TABLES
      result_tab      = i_result_tab
    EXCEPTIONS
      no_plvar_found = 1
      no_entry_found = 2
      OTHERS          = 3.
IF sy-subrc = 0.
    LOOP AT i_result_tab where otype = 'BP'.
        bpartner = i_result_tab-objid.
        CALL FUNCTION 'BAPI_BUPA_ADDRESS_GETDETAIL'
          EXPORTING
            businesspartner = bpartner
          TABLES
            bapiadsmtp      = i_bapiadsmtp.
        READ TABLE i_bapiadsmtp INDEX 1.
        email_tab-email_id = i_bapiadsmtp-e_mail.
        APPEND email_tab.
        CLEAR i_bapiadsmtp.
    ENDLOOP.
ENDIF.
Regards,
Amit

Transaction launcher sales org parameter to ERP

Hi Experts,
We want to pass parameters to the ERP transactions.
We are fine with devision an chanel but we cannot access the right ERP SalesOrg format.
So fare we access the information in the LTX with this structure : //datacontextCURRENTBT/BTOrderHeader/BTHeaderOrgmanSet
But the Sales Org contained is just the CHAR8 Short Description we enter in the OrgManagement it is not the connected ERP sales org CHAR4.
Do you have an idea or workarounds?
Regards, Thea

Hi Thea,
You have to use this API method GET_VKORG_OF_SALES_ORG of CL_CRM_ORG_MANAGEMENT_API to get the ECC Sales Org.
Then in the generated Tx Launcher Class method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW you may have to adjust parameter
ICWEBCLIENTBORKEYPARAMETER.
Anyhow you can debug this method to see what is happening.
Take a look at this class CL_CRM_TL_ERP_VBRK_DISPLAY (this may help).
........Masood Imrani S.

Sales org missing

Hi,
In our test system suddenly the sales org info is missing for all the materials in COMMPRO01 transaction.
We have checked the transports,jobs and there was nothing abnormal any one have any idea how to bring the sales org information back
thanks
raj

hi
yeah you got to run this buffer update
hbrc1_attributes_buffer_update
sometimes the buffer din get refresh and previous assignments ,deletion get stuck which may cause probs ,so you need to update the buffer at regular intervals.
also just check the BP role assignment too it may also cause the info missing in ORG as a simple check on BP role may get some info to be missed from ORG.
one last thing is check the attributes which you are using in ORG in
table to77mattr in SM30
make those attributes visible else you wont have ur info in ORG
best regards
ashish

Factory Calendar Maintained in Sales Org

Hi
I need one Information
I have a sales org which is assigned to 10 plants. out of 10 plants some are assigned to different factory calendar.
Now the requirement is to assign one of the calendar to the sales org. so my question is what will be the impact of assigning calendar to the sales org.
Regards
Naveen

Hi Naveen,
The sales org. calendar, defined in sales organization address data, is the calendar in which the sales organization people work. It is really useful to... I don't know. I guess not that much since deliveries and production do not depend on it. There is also no "planning" of sales orders creation, to my knowledge, nor anything logistics related that makes sense to use it but information wise.
I guess it can be use by HR, maybe, to determine working days of sales organization staff.
Technically I can only find it in function VELO14_GET_VKORG_CALENDAR, that is really innocuous.
regards,
Edgar

Sales Org for contact person relation?

Hello,
I am looking for a way to determine the sales organization for the relation between an organization and its contact person. I know how to get the sales org for the organization, and I know how to get the sales org for the contact person, but now I also need to get the sales org for the relation itself.
Anybody know either a FM for this or the table where this information is stored?
Thanks
Thomas

Well, answering to myself here, since I found the table. The information I was looking for is stored in table CRMM_BUT_FRG0081, but now I have the problem that I need GUIDs when dealing with ACE, and relationships do not have any GUIDs associated with them AFAI can see.
Is there a way to create GUIDs for any kind of object, or are the GUIDs stored in another table instead of BUT050?
Thanks
Thomas

Information of sales org

Similar Messages

Maybe you are looking for