Information  pop-up is not coming for the Infopackage

Hi Experts,
I have included the Infopackage in Process chain.I am able to trigger the load the for the particular Infopackage by running the Chain.Everything seems to be OK but when i click on the particular Infopackage in AWB i am not getting pop up saying that this particular Infopackage(XXXXXXXXXXXX) alrady exists in Process chain(XXXXXXXXXXXXXXXXXXXX).
Does this cause any harm?.May i know the reason for the same.
Regards
Kumar

Hi,
It won't give any harm to you. It is just a message, because you already kept it in Process chain, but when you click it manually, don't change any settings of the InfoPackage.If process chain fail, then we can execute the same package manually.
Thanks
Reddy

Similar Messages

  • POP UP is not coming for Partner selection in WEB UI (Service Request)

    Hi,
    I am working on Service Request right now. I have entered the customer number which has multiple bill to party's. But, on entering the customer number, the system is not displaying popup for Bill To Party. It is filling the first partner as default.
    I have checked the partner determination which is used for sales order as well. However, for sales order the popup is coming.
    I am not able to understand why the same config is working for sales order, and not working for Service Request.
    Could you please help, where I need to check, and how I need to resolve this.
    Thanks,
    Sandeep

    Hi,
    in the partner determination procedure check for bill-to-party if the field "Select. limit" is set to 0.
      Defines how many partners must be found, for this partner function, for
      a selection list to be displayed in the transaction during partner
      determination
    If this is set you should create an OSS message.
    Kind regards
    Manfred

  • Pop up screen not coming for import PO at the time of MIGO

    Hi,
    I am doing Migo for import PO and not getting Pop-up screen to put commercial IV no., while MIRO is done for custom duties, Pls help me out and tell me the settings related to the same.

    Hi,
    Follows as below in case of Import procurement.
    Step 1)
    Maintain J1ID check with following details
    1. Material Chapter id Combination & Material Type as well.
    2. Maintain Cenvat determination Input & Out put Material.
    3. Vendor Excise Details - Excise indicator for vendor 1
    4. Plant - Excise indicator for Plant 1
    Step 2) Create PO.
    Maintain all the condition manually in PO
    Such as Custom duty 10%, Edu cess on Custom 2%, SHE cess on Custom 1%, BED equivalent to CVD 10%,  Edu cess on CVD 2% and SHE cesson on CVD 1%, AED 4%.
    Then in PO assign local vendor for these condition
    Step 3) Do MIRO and select planned delivery cost in the selection on MIRO screen & Post the MIRO/ Custom invoice.
    Step 4)
    Capture Excise invoice with reference to custom / commercial invoice system automatically pops up the window to enter the commercial invoice.
    Step 5)
    Perform GR during GR system Pops up the window to enter the commercial invoice. There you can enter thsame.
    Rg

  • Org Chart link not coming for the user

    Hi
    I am trying to configure the Org Chart by Nakisa. The connection to SAP has been established using Single Sign-on. I am able to log-on successfully as a user. But I only get the 'Preferences' link under Quick Start but not the 'Org Chart'. Any idea what could be the problem?
    Regards
    Lincoln

    Hi Luke
    I will look in the authorization issue. Is the authorization object S_RFC enough or do we need anything else?
    I am using "http://XXXorgchart1/OrgChart/default.aspx" as the link for logging in, where XXX is the company name. Is that what you meant by server name? I am not a technical person, so my understanding may not be correct.
    Regards
    Lincoln

  • Pop up message for advance not coming at the time of invoicing.

    Dear All,
    The moment IV is being made pop up message for advance is not coming for those vendors who have been posted with advance before Apr.2010. Apr.2010 onward it is coming correctly for same vendors. FBKP checked and found ok about message setting.
    Please help me out of this issue.....
    Thanks and regards,
    DNJ.

    HI,
    Have you done the miro for capturing all the custom duties .iF done, the system will ask for the commercial invoice no during MIGo, then enter the corresponding invoice no and year, then the system will take you to the excise tab.
    Regards,
    velu

  • HT204347 Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this m

    Thanks, the write-up was informative, But it do not answer for my question, that is where to look for serial # on my Macbook Pro Mid 2010 White Unibody Core 2 Duo 2.4 GHz 13.3"? Its not on bottom-case and the above article does not mention this model?

    Click on the Apple and then on about this Mac. In the new window, click on the "version 10.9.2" until you see the serial number displayed.

  • Amount is not coming into the Invoice for Warranty Order

    Salute All !!
    Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
    This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
    This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
    Please provide solution.
    Rgds
    Srivastav
    +91-9973504950

    Hi,
    Because you are not billing to customer the net amount is zero-
    You can do like bill the component as regular item and give credit note against it.
    or else create seperate billing output type assign this to proforma invoice- print the cost of item  by pulling it in new smart form.
    (this is not very good idea because , customer knows the actual cost of the item)
    Thanks
    Chidambaram

  • HT1918 Trying to edit my payment info.  I keep getting the message that my number is not valid for the type of card I have selected.  I have a VISA card.  I have typed in the number 4 times, but same message pops up.

    Trying to edit my payment info.  I keep getting the message that my number is not valid for the type of card I have selected.  I have a VISA card.  I have typed in the number 4 times, but same message pops up.
    Thoughts?

    You are probably entering your Visa's security code incorrectly.  Here's how to find it:
    http://support.apple.com/kb/HT3541

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • Data from one cube is not coming in the multiprovider

    Hi,
    I have two cubes with a common characterstic.
    I created multiprovider above these two cubes. But data is not coming from the cube 2. The values from cube 2 are showing as 0.
    Can anyone help me out in this?

    Hi ,
    Check the following:-
    1 Check whether you have made the joins properly.
    2 Check data at multiprovider level .
    3 is data available for reporting in both the cubes
    Regards
    Rahul

  • Problem in report of cats_da data is not coming for one absence type.

    Dear experts,
    For one absence type the data is not coming in the report cats_da. When I check the other absence type the report is showing the data. I dont know where is the problem. Customer is entering data throught PA30  transaction. Kindly help me where is the problem in customization.

    No answers so closed.

  • I do not qualify for the Verizon edge plan, even though I have been customer ever since they bought Alltel. Has anyone else had this problem.

    Today I went to the Verizon store to upgrade my girlfriends phone which is on my account b/c I wanted to use the edge plan to buy the iPhone 5c. I had read in several different places that I could upgrade using edge and not loose my unlimited data, turns out I was misinformed, which the guy at the store told me after he had my information pulled up using my cell number. I told the guy I was not willing to give up my unlimited plan AND pay full price for the phone, I thanked him for his time and we left. When we left the store I called the Verizon number that is given on the website and told them I was interested in the edge plan for the 5c and asked for more information, ( I thought the guy at the store was wrong and I was checking). The woman I talked.......long story short, I talked to 8 people including 2 managers and none of them could tell me why I did not qualify for the edge financing (even if switching the plan), SO I was hoping someone on here might could help. I have been a customer since Verizon bought out Alltel, I have automatic payments set up with no late payments for as long as I can remember, and was eligible for an upgrade on 01/03/2013. Any experience or advice in this area would be appreciated.
    Thank You!

    rjg030585 wrote:
    I told the guy I was not willing to give up my unlimited plan AND pay full price for the phone, I thanked him for his time and we left.
    Here is my advice, at least. Not sure if anyone will agree, but it is my take on the problem.
    With the Edge program, there is a "possibility" that someone will pay full price for a phone. This is not always the case, though. IF you do not complete ALL of the 24 months of payments, then you WILL NOT have paid full price for the phone, but simply a portion of the full price. THAT is why it does not make the plan "eligible" to keep your unlimited data. With the Edge plan, technically you only have to pay 50% of the full price before you can trade it in for another phone on the Edge plan. The way the plan is designed, the majority of people WILL NOT ever pay full price for the phone, but only a portion of the full price before they exchange their phone for a new device. That is what Verizon is hoping for, at least.
    As Ann154 has pointed out, you can use the Device Payment Plan and keep your unlimited data. At no time during your contract can you trade THAT phone in to get another phone. You would have to continue making the payments on THAT phone along with any other phone you upgraded to. THAT is the difference between the 2 plans. You WILL end up paying full price for the phone on the Device Payment Plan, where you can STOP making payments on a phone with the Edge Plan if you turn it in for another device.
    Good luck.

  • IO assigned with Asset,but not coming at the time of PO creation

    Hello
    IO assigned with Asset,but not coming at the time of PO creation.
    I have made following settings:
    1     Depreciation - IFRS (INR)              1     0L
    15     Income Tax Act                             0
    20     Depreciation - Indian GAAP (INR)     3     1L
    30     Depreciation - IFRS (USD)              0
    31     Depreciation - Indian GAAP (USD)       0
    In ACSET-Account assignment:
    for dep area-20
    CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
    KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
    so currently i am using only dep area-20 only(Indian GAAP)
    CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
    AS01
    KO01
    AS02
    KO22
    KO30
    so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
    kind regards

    Hey Ajay
    thanks for your reply.....
    now i'm getting new error:
    Parallel depreciation area 31 is not posted
         Message no. AA565
    Diagnosis
         The asset to be posted does not manage parallel depreciation area 31, or
         transaction type  that you are using is limited to certain depreciation
         areas, and does not contain depreciation area 31. This is incorrect.
    System Response
         Posting is rejected.
    Procedure
         Check the asset and the transaction type.
    I have checked some configuration but not able to debug it.
    regards

  • Problem in the main area of the table not coming on the same page

    Hi Experts,
    I have created a invoice in the table header with descriptions and main area with the values,below main area i have also created a template in smartform for calculation when i have assigned this to a transaction and i goto printpreview my main area and the calculation template are not coming in the same page,and the calculation and the header template goes to next page without main area,even if i decrease the size of main window my problem does not get solved.Is there any way out.
    Please Help
    Regards

    Hi Summet ,
      Just check in the form where your writing the code if theer are any new lines before your calculation template .
    It happens that may be the form you write is unabl;e to accomadate your window size .
    Try this!
    Hope it helps!
    Much Regards ,
    Amuktha .

Maybe you are looking for