Jdeveloper 10.1.3.3 Show Stopper Serious bug BPEL editor

I am adding a transform activity to BPEL process
and I keep getting this error
"Required attribute version missing from element xsl:stylesheet"
Anyone else has faced this issue?

YES! We have the same thing FROM TIME TO TIME. It's a pain in the ...
Let me know if you find a solution. We found that sometimes restarting JDeveloper helps, but not always. There's alot of XSL in our BPEL projects, and when this BUG shows up NONE of our XSL-mappings are " valid " because of what JDeveloper thinks is the missing version attribute, but that is not right if you have a look at the xsl-source. The version attribute is there, and JDeveloper put it there itself if you added TRANSFORM activities to your process as we do :)

Similar Messages

Show-stopper How can I determine tab hierachy from ids in wwpob_page$

I have application components published as portlets that depending on the particular page/tab combination perform various functions.
I am able to get the page_url from my report components published as portlets through p_page_url.
The URL obviously keeps track of which particular tab was last active
page?_pageid=54,93,62,68,86,98
I know the table wwpob_page$ contains these id values.
I need to be able to determine how the tab hierachy is determined.
Such that how one can determine which tabs can exist under a parent tab and so on based on the id.
10 20 30 40 50
55 58 44 48 64 68
99 105 111 72 76
I know I could "hard-code" id values to determine which particular tab I am currently on.
I want to be able to use tab "friendly" names.
select p.id, p.name, s.text
from wwpob_page$ p, wwlns_strings$ s
where p.title_id = s.id
order by p.id asc
My code needs to be robust enough so that if new tabs are added, I can still decipher the URL!!!
Can someone also tell me how the URL is built and what determines the order of tab_ids?
This is urgent and a show-stopper!
kind regards,
Matt.

It's my fault, I lost you there.
See I wrote the steps as they were in "Adobe Help" so please forget about the last comment.
I chose the "advanced mode" because I have more than one menu to filter (shape and color)
lets say I want the comments on my website to be displayed conditionaly, and I have two lists one for colors (blue and pink) and other for shapes (square and circle),
So I'm going to have four pages each page has its own recordset, let's say now I want to filter the recordset for (Blue Circle) page
I don't know how to do it but by following the steps in Dreamweaver help:
-Select name, and click the Select button.
-Select content, and click the Select button.
-Select shape, and click the Where button.
-Select section, and click the Where button.
-Select time, and click the Order By button.
this is how the SQL statement look likes:
SELECT mytable.name, mytable.contents
FROM mytable
WHERE mytable.shape='circle' AND mytable.`section`='blue'
ORDER BY mytable.hdw_serverTime
then to Define the variables 'circle' and 'blue' :
by clicking the Plus (+) button in the Variables area and entering the following values in the Name, Default Value, and Run-Time Value columns:
circle,square,Request("circle")
blue,blue,Request("blue")
Also I understand that I have to define a parameter but which (URL or Form) and how? I don't know

Show stopper: can't import tiff files with camera raw adjustments

For RAW NEF files (coming from a Nikon D80), Aperture doesn't pick up adjustments I've made in ACR (Adobe Camera Raw) when I import them, even though the .xmp "sidecar" files are sitting there in the folder next to the them. Do I have to do something to get Aperture to pay attention to the .xmp files?
Similarly, Aperture doesn't read ACR adjustments I've made to TIFF files. I've read on the web that adjustments made to TIFF files cannot be stored in "sidecar" xmp files. That's clearly true since I don't see the .xmp files sitting next to my tiff files in my image directory -- but my ACR adjustments are stored when I reload the TIFF files in ACR.
In any case, Aperture doesn't seem to recognize either RAW files with sidecar .xmp info, or TIFF files that have ACR adjustments baked in.
This is a show stopper for me and I'd love to use Aperture for its 'Faces' functionality. Does anyone know a fix for this issue?
Thanks!
Raphe

Thanks for the reply, Kirby
the kind of conversion you are talking about is likely a pipe dream.
I gave it a quick look myself just now. the .lrcat file that lightroom has isn't binary & looks just like a huge list of adjustment data for entries in the database. For example, the curves on one of my images looks like this:
ToneCurve = { 0,
0,
37,
38,
93,
148,
167,
223,
255,
255 },
So it wouldn't be difficult to write a .lrcat > .xmp exporter (basically going back from one Lightroom database to many .xmp files) or a batch .xmp > .lrcat exporter (going from many .xmp files to one Lightroom database).
Looking at the contents of Aperture's .aplibrary package, there's an xml record of all files entered in the database, and I found what looks like image edits in the 'versions' folder -- but unfortunately the edits are stored in a binary format.
Oh well, I guess this is why Aperture is a bit faster than Lightroom -- but will make it very difficult to write a converter to get edits into Aperture. & unless Apple adds edit info to their .xmp sidecar exporter (Export Masters) & includes a batch mode.. we wont be able to get info out of Aperture. So, for the moment, this apparent lack of an open format keeps Aperture from being a professional tool imho, compare to Lightroom.
..but for me there's no reason to switch from ACR to Lightroom because there's no facial recognition, and the curve editing utility is better in ACR.
Thanks for the comments, David.
I'll be sticking with ACR/Bridge for now -- I'd rather not split my library -- & hope that Lightroom adds some facial recognition functionality
Besides this, Aperture seems like a really nice product.
Cheers,
Raphe

HT2930 The amp effects noisy. It's a show stopper. Other apps (ampkit, etc) are quiet. Anyone find a solution? iPad 1 iOS 5.1, GB 1.2.1

The amp effects are way too noisy. It's a show stopper. Other apps (ampkit, etc) are quiet.
Apples answer to use noise gate is a band aide over a software problem.
Anyone find a solution?
iPad 1 iOS 5.1.1, GB 1.2.1

You should be able to simply sync with iTunes again in order to reload all of you apps and media. That is why iTunes prompted you to transfer the purchases. You may have to select all of the content again when you click on each tab in the iTunes window on the right, but the content should be in your iTunes library.
You should also be able to restore from the backup that iTunes created before the update took place in order to restore your app data. When the iPad is connected to your computer and with iTunes running, right click on the iPad on the left side and select "Restore From Backup". A window will popup with a drop down list of all of the available backups for the device. Select the one that you want to use and restore from it.

No Java is such a show stopper...

No java stored procdures is such a limiting factor, I think it's a show stopper for me to make any use out of this product.
Any chance that Oracle is going to re-think this?
Thanks,
Robbin

While I agree with your grief you also gotta remember that
- XE fights in the same space as MS Access, and you might need to add the potential plethora of MS Access 'databases' to your '20 production databases' count to get a more accurate perspective;
- XE would need 3-5x the footprint to include Java in the database, which defeats the quick download and easy install requirement;
- The target community is NOT the professional DBA, and those in the target are often frightened by 'Java'.
I was also very disappointed to hear that XE would not include Java. I got over it, but still have hope to see it as an optional add-on download for the next release.
By the way - portability means different things to different people. Based on experience, I am very wary of people trying to sell me anything that is 'totally portable between rdbms such as DB2, Oracle, MySQL, etc'. I've found that those kinds of portability often waste my time and money, for the reasons best described by Tom Kyte in the first chapter of each of his books.

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

WARNING: Serious bug in Netscape 6.01 browser

All--
I've just been bitten by a serious bug in the Netscape 6.01 browser, and
want to let you know about it before it bites you too. Full bug details can
be found at http://bugzilla.mozilla.org/show_bug.cgi?id=55055
A short summary is that the back & forward buttons incorrectly resubmit form
fields. For example, say I have this page flow:
Page A -> Page B - (submit form) -> Page A -> Page C
Use Back button to go from C back to A
On backing up from C to A, Netscape tells me that there are posted form
elements and asks if I want to resubmit them or cancel the back action.
Because I'm backing up to A, it tries to resubmit the form fields from page
B in order to show page A!
What does this mean? It means that the Web application gets another hit to
page B, as if the user had pushed a button on it again--even if this isn't
allowed by the application. In other words, the back button becomes a
serious threat to an application's consistency. Neither IE nor Opera do
this, nor did any other version of Netscape.
Please keep this behavior in mind if you are designing an application that
could be used with Netscape 6. For those transactions that you need to
ensure aren't executed more than once, you may want to set a hidden field on
the page (page B) or otherwise keep track of a value that indicates whether
the transaction has been executed or not. Another option might be to set an
HTTP header indicating that the problematic page (page A) can't be cached by
the browser (this differs from what one might do in the "normal" situation
of telling the browser not to cache page B, so that backing up from page A
to B wouldn't be possible).
Todd

Double tap with THREE fingers. Then go into Settings>General>Accessibility and turn zoom off.

Re: ORACLE/LINUX HAS SERIOUS BUG! | no O_SYNC on redo logs

To StE.
Michael,
how do you traced LGWR process?
I try >gdb oracle PID
and I attached to LGWR process.
But how do you achieved the trace file as result?
Regards,
Mark
null

Has anyone reported this to Oracle? I haven't heard about this
bug, but it may be in the pipeline for the next patch.
Mark Malakanov (guest) wrote:
: StE,
: you are right.
: Oracle MUST write into current redo log file after every
: commit.
: A confirmation "Commited" MUST be appeared after a write
: operation finished and sync'ed.
: Unfortunately this rule does not supported in Oracle8.0.5.1 for
: Linux.
: I made strace against LGWR process. It really open log file
: without O_SYNC key.
: But I tried to set a Sync attribute with chattr command against
: logfiles. Also I tried to do mount with sync option against
: whole filesystem. This ways brings system to open files as
: O_SYNC key used.
: All of above doesnt help. Oracle looses last commited
: transactions. Only very bad performance.
: Also I make the simple test in C. Open file without O_SYNC,
: Write 5Mb, fsync and message. The message appears only after
: fsync operation is finished. I understood - Linux is not the
: cause of error.
: I did find no fsync calls in strace's log file.
: I think it is the cause of transactions are loosed.
: Mark
: StE (guest) wrote:
: : Jay Walters (guest) wrote:
: : : It is expected behavior to not write to the datafiles until
: a
: : : checkpoint is performed. Did you see this problem for
: : : logfiles? Or just on data files? I am looking into moving
: to
: : : ORACLE on Linux but need data integrity...
: : : Can anybody confirm if this is really a problem as it seems
: : : like a show stopper.
: : Using strace I've observed the RDBMS opening the online redo
: : logs without O_SYNC and, on a commit, checkpoint, or log
: change,
: : I cannot see fsync being called on the file handle.
: : Maybe this is a bug in strace, or a blip of stupidity on my
: : part, but someone testing has managed to lose a committed
: : transaction after deliberately powering off their machine.
: That
: : shouldn't happen.
: : -michael
null

ORACLE ON LINUX HAS SERIOUS BUG! IS NOT FAILSAFE COMMIT!!!

I made one experiment to make sure in failsafety on Oracle/Linux.
I tried to turn off the computer after commit, when "Commit
complete" message was appeared.
See a link on my last report:
http://f2.dejanews.com/oracletechnet/nonmembers/index.cgi?do=show
msg&conf=Early.Linux&msg=3953&show=unread&depth=all
This experiment finished with bad result:
Oracle for Linux can not be used for any more or less
responsible applications!
I tried to use filesystem with sync option and I tried to use
waitfor_sync parameter in "init.ora" file.
All of above without result. Oracle does not remember the data
last commited transactions. Oracle does not write commited data
on disk during about 1-3 sec period after the message "Commit
complete" appeared.
What do the Oracle Team say about this bug?
null

Has anyone reported this to Oracle? I haven't heard about this
bug, but it may be in the pipeline for the next patch.
Mark Malakanov (guest) wrote:
: StE,
: you are right.
: Oracle MUST write into current redo log file after every
: commit.
: A confirmation "Commited" MUST be appeared after a write
: operation finished and sync'ed.
: Unfortunately this rule does not supported in Oracle8.0.5.1 for
: Linux.
: I made strace against LGWR process. It really open log file
: without O_SYNC key.
: But I tried to set a Sync attribute with chattr command against
: logfiles. Also I tried to do mount with sync option against
: whole filesystem. This ways brings system to open files as
: O_SYNC key used.
: All of above doesnt help. Oracle looses last commited
: transactions. Only very bad performance.
: Also I make the simple test in C. Open file without O_SYNC,
: Write 5Mb, fsync and message. The message appears only after
: fsync operation is finished. I understood - Linux is not the
: cause of error.
: I did find no fsync calls in strace's log file.
: I think it is the cause of transactions are loosed.
: Mark
: StE (guest) wrote:
: : Jay Walters (guest) wrote:
: : : It is expected behavior to not write to the datafiles until
: a
: : : checkpoint is performed. Did you see this problem for
: : : logfiles? Or just on data files? I am looking into moving
: to
: : : ORACLE on Linux but need data integrity...
: : : Can anybody confirm if this is really a problem as it seems
: : : like a show stopper.
: : Using strace I've observed the RDBMS opening the online redo
: : logs without O_SYNC and, on a commit, checkpoint, or log
: change,
: : I cannot see fsync being called on the file handle.
: : Maybe this is a bug in strace, or a blip of stupidity on my
: : part, but someone testing has managed to lose a committed
: : transaction after deliberately powering off their machine.
: That
: : shouldn't happen.
: : -michael
null

Serious bugs in the SR400 gated photon counter LabVIEW drivers

Hi
I am developing an application with SR400 and came
across what I think is a bug in the LabVIEW driver. Essentially, none
of the VI's allow you to set the preset counters. For instance, if you
call Read VI and choose mode A, B for preset T, there is no way to
specify preset T, which means that the count period defaults to some
factory default, not a situation you want. This might also explain some
of the timeouts some people are getting to SRQs that come later.
Further,
if you look at the block diagram of Read VI, the line selector string
is set to "CM 0" for two distinct choices of the count mode. This is a
serious bug. I do not know who wrote this driver, but it does seem, at
least to me, that they did a rather shoddy job of it. How this driver even got certification to be posted at IDN is something I cannot explain.
Comments welcome from those that use LabVIEW with SR400 and have used this driver.

Hi. Dwell time of 2ms is good for me. It would be great if you can send me this file to circumvent the 2000points/measurement. Also, If i understand it right, if I set the Gate to CW, then my gate should always be open for the count period, they why do I have to set the gate parameters at all. I want to change the integration time, but for some reason I am not able to change it in your setup 2.VI at all. I made some changes in setup 2.vi. I removed the setting for channel B as I am not going to use it and I integrated the readchannel.vi into this file. I am not sure if I made a mistake in doing this. Now, I am able to write some data to a file, but I not as I want. If it helps, I am uploading my modified VI file and an example data file (Gate A width is 0.992s, Gate A delay and delay step are 0, Gate A mode is CW, Dwell time is 0.002s).
Attachments:
SR400-V.vi.vi ‏125 KB

Fixed 11.0 BUG, but had another more serious BUG in 11.1

But no one found this BUG, \u200b\u200bI have a question, and also did not care for me, from time to time lay off 750 people this time, the 11.0 developer to cut, resulting in 11.1 H.264 encoding so bad. And 11.0 full immeasurably.
https://bugbase.adobe.com/index.cfm?event=bug&id=3005174 I guess because the fix this BUG, \u200b\u200bcaused. In fact, not good, if not repaired
https://bugbase.adobe.com/index.cfm?event=bug&id=3047043 11.1 New BUG, \u200b\u200bbut did not care for me, this is a very serious BUG, \u200b\u200bif not found, then it will put an end to 11 series, but 11.0 is excellent, and I hope can be restored to 11.0 in 11.2 look like.

But no one found this BUG, \u200b\u200bI have a question, and also did not care for me, from time to time lay off 750 people this time, the 11.0 developer to cut, resulting in 11.1 H.264 encoding so bad. And 11.0 full immeasurably.
https://bugbase.adobe.com/index.cfm?event=bug&id=3005174 I guess because the fix this BUG, \u200b\u200bcaused. In fact, not good, if not repaired
https://bugbase.adobe.com/index.cfm?event=bug&id=3047043 11.1 New BUG, \u200b\u200bbut did not care for me, this is a very serious BUG, \u200b\u200bif not found, then it will put an end to 11 series, but 11.0 is excellent, and I hope can be restored to 11.0 in 11.2 look like.

Serious Bug Powerbuilder 12.5.2 build 5609 with Inheritance

Hi ,
I'm using Powerbuilder 12.5.2. build 5609. I think it is the latest release. I have three windows in my app.
The Grandfather , the father and the child. Child window (w_child) is inherited from the father (w_father) which inherits from the grandfather (w_grandfather).
I have some events in my windows , clicked events with code etc.
I made a change in the grandfather , regenerated the father and the child and my code in the child window was messed up!. And when I say messed up I mean that the code in my clicked event was disappeared or moved in other cases to other events.
With Full build and incremental build didn't fix the bug.
Using export and import FIXED the issue.
BUT.....
Why is this happening ? Of course this is a Powerbuilder BUG but do I need to export and import my objects when I make a change to ancestors objects ?
FYI using the edit source option I can see the code that it's there.
Will this issue been fixed because this is a very serious BUG. Every time I want to make a change to ancestors should I need to export all objects and import them again ???
thank you
zkar

Hi Andreas ,
I don't know.
But I tried the below scenario and found a different bug.
Same hierarchy. Grandfather, Father and Child.
Steps to reproduce.
1. Go to Fathers screen and Add a button. Leave the name as it is. cb_1
2. Go to Grandfather and add a button(didn't have any buttons yet). The name will be cb_1.
If you try to open the Father's screen you will be prompted from Powebuilder with a messagebox which suggest to make the changes for you because there was a name conflict. OK fair enough.
But.
If you press OK and let powerbuilder handles this then this doesn't work.
Anyway. This is a completely different thing from the original post . But I have just founded out trying to reproduce it to a new application.
FYI. The application was at first in Powerbuilder 10 but we have Migrated succesfully to powerbuilder 12.5 and It was working fine until we ;ve changed the intermediate level of inheritance.
The solution to my problem is export and import the intermediate level so don't search anymore. You will loose time trying to reproduce it.
thank you

Serious bug for 8.1.7 solaris Sparc download file

I have downloaded the 8.1.7 solaris.cpio.gz file from the OTN page. I found a serious bug from the OUI program,that is when
I run the "runInstaller" command ,It apperrs that ./runInstaller : syntax error in line 1 unexpected "(".
Did anyone find this ? This is a seious problem for this install program , hope OTN to explain this situation. Thanks a lot!!

If you go to http://metalink.oracle.com, patches & updates is one of the options in the navigation bar.
Justin

Serious Bugs

Hi Tim/Klaus.
I'm posting this here in the hopes that it will get a bit more attention than is being paid in Metalink. I've run into several serious bugs that need addressing:
1) If there are xml-special characters in the data coming from the database (e.g. an '&') then, according to the people at Metalink, I'm supposed to escape them. That's an unacceptable answer. I expect the parser to do that for me. That's why I bought it.
2) When using CVS as an output type, if a null value comes back from the database nothing is emitted into the output stream. For example, if I have 3 columns A, B, and C, if column B is null the jar's emit:
A,C
instead of
A,,C
which means I have to wrap every column in nvl(...) calls.
3) In the documentation it specifically states that you can dynamically append a WHERE clause to a query using PL/SQL functions (BI Users Guide, Part# B40017-01, page 4-32). I cannot get it to work and so I submitted a report to Metalink. They're answer was "we don't think that this can be done". The WHY is it in the User Guide???
4) CSV output sends out files with an extension of .txt which means you have to take extra steps to get the data into Excel (ok, so that one isn't too serious :)
5) When I configure the SSO server to use WNA (which I have gotten to work) when I try to launch the Word plugin and login, the server throws a 500 misconfigured error. It works if I don't use the SSO server.
6) The $CURRENT_SERVER_URL problem
These are causing us real headaches. Can anyone answer some of these questions?
Dave

Dave please seperate your questions into different threads because they are unreleated issues. Also, be sure to search the forum for solutions vs posting. It will save everyone sometime.
Thanks,
Ike
1) Special characters should be removed, however, I don't know what your doing. By the way a parser doesn't remove anything, it parses.
3) Lexical paramters in where clauses in bi publisher enterprise 5.6.2 work like you would expect them to (like reports 6i), however bi publisher in the e-business suite they do not work as expected and lexicals are not treated by value. It's completly backwards since you would expect the functionality to work in 11i. With that being said, I don't know what your doing in your report. The functionality works.

URGENT: Serious Bug in 2.0.2.9

We have uncovered a serious bug with the getElementsByTagName() method that could cause incorrect or inconsistent results.
Looking at the bytecode via a debugger, we traced it to the checkNamespace method of the XMLElement class. In this class, an explicit object comparison between two strings is performed (s == name). The correct code should be s.equals(name). While a common coding mistake, this creates randomly inconsistent results depending on how the compiler chooses to manage strings with identical values.
Any suggestions?
- Rick Bullotta
VP/CTO
Lighthammer Software Development
(www.lighthammer.com)
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by atorres ():
fjkf jkfl kj
It would be a solution IF the print method works... but it doesn't work 100% with DTDs. Take a look at my message posted at July 25, 2000 11:22 AM. Be carefull if you have standalone docs...
Good Luck for you (and for me too, I'm gonna need)<HR></BLOCKQUOTE>
null

Jdeveloper 10.1.3.3 Show Stopper Serious bug BPEL editor

Similar Messages

Maybe you are looking for