Information truncated after résolving the REP-1814 error

Hi,
At first time I had this message REP-1814 Object vertically can never fit within F_Remarque that i could résolve by making all the field in this group Expand vertically as well as the Group itself and no page protection at any frame.
But the problem i have now tha this item should appear in two pages, but it's truncated to appear only in the first page.
The Higher frame was set in properties to print on First Page, and when i put it to All Pages
in order to have all the information displayed, the error REP-1814 Object vertically can never fit within F_Remarque appears again.
I will really appreciate your suggestions.
Thanks

I finally found the solution, i just had to put th property 'Print object on ' to 'First page' for the item f_remarque and all the frames of higher hierachy.
Thank for all.
Edited by: manzana on Apr 4, 2011 2:10 PM

Similar Messages

HTML result gets truncated after including of the JSF page

Hi there,
I'm trying to create a page that will include dynamically content of JSF pages from another web application.
Thus, there is a web application (Pages) that is deployed under web context: /test-pages and another web application (Faces) that is deployed under web context: /test-faces.
The source code of /test-pages/IndexPage.jsp
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></meta>
<title>
IndexPage
</title>
</head>
<body>
<h3>Page Start</h3>
<jsp:include page="header.jsp"/>
<br>
<h1>Index Page of the test-pages application</h1>
<br>
<jsp:include page="footer.jsp"/>
</body>
</html>
The source code of /test-pages/header.jsp
<%
ServletContext servletContext = request.getSession().getServletContext().getContext("/test-faces");
RequestDispatcher reqDispatcher = servletContext.getRequestDispatcher("/faces/header.jsp");
reqDispatcher.include(request, response);
%>
The source code of /test-pages/footer.jsp
<h2>Simple Footer</h2>
The source code of /test-faces/header.jsp
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<f:subview id="myID">
     <f:verbatim>
          <h2>Faces Header</h2>
     </f:verbatim>
</f:subview>
The HTML execution result (http://localhost:7001/test-pages/IndexPage.jsp):
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></meta>
<title>
IndexPage
</title>
</head>
<body>
<h3>Page Start</h3>
     <h2>Faces Header</h2>
Could you help me understand, why the result gets truncated after including of the JSF page.
Thanks,
Sasha

Thanks you for reply!
Unfortunately, still no luck!
Any other ideas will be highly appreciated!

How to solve the ora-12516 error

Hi,
I'm sorry to say that I have a problem which should be solved as quickly as possible. Can you help me ? The problem is as follows:
os:windows 2000
db version:Oracle Database 10g Express Edition』(XE)
After using for a while, the ora-12516 error occurs. However, scores of minutes later, the error can be solved automatically. How to avoid this kind of error ?
Thank you.

Are you connecting and disconnecting many times quickly?
You may be hitting the problem where the listener thinks the database has run out of connections because the database doesn't inform the listener that connections have been closed fast enough.
Try increasing the value of the processes parameter in the database.

REP-1814 error message

Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.

never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita.

How do I solve the following Itunes error -42404 I have tried uninstalling as well as repair and re installing, I keep getting the same problem, Help please

Please help I am un able to get my I Tunes back on my Windows 7 -64 after a Virus clean out, How can I solve a problem with the followin ITunes error of -42404 I have tried the usual uninstall and reinstal, as well as the repair all at no success, do any of you have any solution Ideas that have solved this in the past? Please Help, Thank you...

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Another REP-1814 error

I know that this had to do with allowing room but I cannot seem to find where the problem is.
REP-1814 Object vertically can never fit within R_G_FULL_CPT
I've made all the field in this group Expand vertically as well as the Group itself and I still get the error. Where else can I look? Every singled field and group is either set to Expand or Variable. Thanks for your help or ideas.

Nevermind. I figured it out. I just started removing elements from the report until it ran. I narrowed it down.
Turns out that the group R_G_FULL_CPT was set in properties to print on All Pages. When I changed it to First Page, it worked. I'm not completely sure why, but it works.

I would appreciated any help with solving the IOS 5 Error message -50

Did you expereince the same message? If so, if you can help me I would appreciate it. iTunes is uodated but when i ty to update my phone to IOS 5 I get the above error. Thanks for looking.

I am also having this issue, upgraded to ios5 however when attempting to back up my phone i get the same -50 error message.
iPhone 3G-S 16gb.

Satellite Pro 4290: How to solve the IDE #1 error issue

I have recently aquired a DVD-ROM drive to upgrade my Sat Pro 4290 optical drive from a CD-ROM to DVD-ROM. As suspected I am having the problem that the drive is not recognised and get the IDE #1 error.
I can get windows XP to recognise the drive by deleting the Secondary IDE Channel in the Hardware and then searching for new new hardware. It then installs the IDE Channel and then finds and installs the DVD-ROM and works fine. I reboot the laptop and back to square one!
I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on theh IDE connectors.
I do not want to risk this and was wondering if anybody found an easier way of doing this?
Many Thanks

Hi
> I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on the IDE connectors.
Thats not 100% true. This is not a setting issue on the motherboard but the setting of the CD/DVD drive.
The drive supports different master\slave\c-sel settings and if they are not compatible the BIOS will not recognize the drive correctly.
On the external drives (for desktop PC) its possible to change such settings by switching the jumper but this is not possible to the slim notebooks drives.
The notebook drives settings are stored in the firmware!!
I found different not legal tools which can change the master/slave/c-sel settings but I would not recommend using it.
The risks are too high that the drive will be damage.
So try to replace the drive with a compatible one

VISA Read over USB Problem: After a while the xBFFF0015 Timeout Error occurred

Hi,
I have trouble using labview with my non-NI USB device:
The device is an analog input DAQ board. I was able to setup communication with the board using a VISA driver specifically created for this board and direct FW calls using the product's firmware specification provided by the manufacturer.
This method has been working pretty good so far, but when I try to get large amount of data (64k samples @100ksps), the VISA Read returns the 'VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.' error.
Please see the attached screenshot of the block diagram for details.
First, an 'analog input scan start' command is sent to the DAQ device, and then the vi tries to read all collected data from the device, once the right amount of data retrieved, or no more data is available the data collecting process (the while loop) ends and an 'analog input scan stop' command is sent to the DAQ device.
The data collection starts with no problem, but after a while, in loop# 400, the VISA Read hangs and then returns the error mentioned above.
I tried to increase the time out value, but it didn't help, the error occurred after the same number of loops, the VISA Read got hosed and the error occurred after the longer timeout expired.
I also tried to add some delays in the loop, but it didn't help either.
I am not sure what do I miss here and I would highly appreciate if anyone could give me some guidance how to solve this issue.
Thanks,
John
Attachments:
usb-read.png ‏18 KB

I just wanted to specify that this is not an NI board avoiding to make people think this is a hardware issue. And I think that the rest of the code is irrelevant in this case.
I believe that I don't use the VISA functions correctly. I assumed that someone who used these functions before would be able to point out the obvious steps missing in the data collecting process using the VISA functions.

How to solve the Installation runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support..."

After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
How can I solve this ?
Please help !!!!!!!!!!!

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

How to solve the build fail error when the file below mention cant be found

Hi,
i got this build fail but i cant find where the error came from and how to solve it. im stucked at this problem for quite a long time.
BUILD FAILED
C:\Infrastructure\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
C:\Infrastructure\Infrastructure\DBSchema\build.xml:262: C:\Infrastructure\Infrastructure\Ant\OracleMiddlewarejdeveloper\modules\oracle.adf.share_11.1.1 not found
Is there any solutions to it??
Rgds,
lx

Below are my codes for the build.properties.
# Base Directory for library lookup
jdeveloper.home=C:\Oracle\Middleware\jdeveloper
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=fypj
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=fusion
db.demoUser.password=oracle
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP

50% CPU for syslog after plugging in the LCD // mplayer error

Hi,
i'm new to arch, and not very familiar with linux.... however, i switched to it and ... yeah it runs ... after give or take 15 hours of editing config-files ... *g
Now i wanted to test my HP w2207h (22" LCD) and plugged it in. The first problem: I wanted to start the laptop and all of a sudden an ACPI-error msg is floating the display and doesn't want to go away... so I plugged the VGA cable out and started the Notebook again. Puuh, everything runs but it's bit awkward, isn't it?
Then I wanted to plug the VGA cable in and suddenly everything runs veeeeery slowly... so I opened the console and typed in TOP to see what's going on... the syslog-daemon uses 50% of the cpu... and that's what happens every time when i plug in the cable... after i plug it out, everything runs smoothly again.. :-(
Now to my second problem: everytime i want to open MPlayer, it tells me: "can't open audio device /dev/dsp device or resource busy" however, i can here everything... mhm
I hope, someone could help an arch-noob
Cheers,
Lukas
Last edited by Lukas0907 (2008-02-18 19:15:17)

Second problem is quite usual if you will try to play quake2 you will see how /dev/dsp do not want to work at all. Try to play file from command line:
mplayer sth.sth
It works good for me.
It is because of boring story about ALSA and OSS.
And sysleg-deamon is not critical part of system you can disable it by removing from /etc/rc.conf file.

Need help with solving the (basic) programming error

I'm reaaaaaaaaaally new to Java and programming in general. I've been glancing through my older brother's old stuff (he's back at Uni!) and I've taken an interest.
Anyways, so I'm trying to finish this really simple program cause I wanna wow some friends ("wow" = "haha we've done this before a gazillion times") but I can't seem to solve this "incompatible lines" bug in the code, specifically line 24. I've been looking at it for exactly 4 hours!! Programming in Java 1.6.
Thanks for the help!! :)
import java.util.*;
import java.util.Scanner;
public class LuigisPizzaProgram {
     public static void main(String args[]) {
     System.out.println("Luigi's Pizza");
     System.out.println("-------------------------------------------");
     System.out.println(" a(SML) b(MED) c(LRG)");
     System.out.println("1. Cheese 5.00 7.50 10.00");
     System.out.println("2. Pepperoni 5.75 8.63 11.50");
     System.out.println("3. Combination 6.50 9.75 13.00");
     System.out.println("4. Vegetarian 7.25 10.88 14.50");
     System.out.println("5. Meat Lovers 8.00 12.00 16.00");
     System.out.println(" ");
     System.out.println("What kind of pizza do you want?");
     int kind = new Scanner(System.in).nextInt();
     System.out.println(kind);
     System.out.println("What size of pizza do you want?");
     char size = new Scanner(System.in).nextLine();
     System.out.println(size);
     }

Having said that, it is nontraditional to use Scanner like you are using it. There is no way to reuse it in order to get more input. Better would be something like:
        System.out.println("What size of pizza do you want?");
        Scanner scan = new Scanner(System.in); // create the scan variable
        String size = scan.nextLine(); // now use the scan variable
        System.out.println(size);Also, when posting your code, please use code tags so that your code will be well-formatted and readable. To do this, place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
[/code]good luck, pete

Can anyone Solve the JDBC adapter error :

Hi experts!!!
Whn I run File(FTP) to MSSQL Server ( JDBC), I m getting an error
<b>
Receiver Adapter v1027 for Party '', Service 'BS_JDBC_R2':
Configured at 12:16:42 2007-01-05
Last message processing started 12:17:09 2007-01-05, Error: Accessing database connection 'jdbc:Microsoft:sqlserver://sapep:1433;databaseName=tescra' failed: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
Addtional information: JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver' loaded successfully, additional driver information:
Available JDBC drivers:
com.microsoft.jdbc.sqlserver.SQLServerDriver, 2.2 JDBC compliant</b>
Pls help me.... I have to clear it up.....
<b>If anyone solves this they gud gud points from me...trust me..really!!!!!</b>
Thanks in advance....

hi,
have a look at this:
http://support.microsoft.com/kb/313178
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to solve the "type mismatch" error in jCOM early binding program?

I got a "type mismatch" error jCOM early binding program.
I use the VB as the jCOM client to access the EJB deployed on WLS7. While using the
object parameter like "java.lang.Integer" in EJB method call, I got that error message
and my VB client had to be stopped?
The same situation, the VB program work perfect when using the "int" as the parameter.
And I try to instance the "myTLB.JavaLangInteger" in my VB program, but how ? The
"New", "CreateObject" and "GetObject" all failure, I don't know what to do next ???

Hi,
This problem Could happen when you referesh quality or test system.
Your delta setup for the related master and transaction data needs to be reinit.
What happens is when you init. the delta and subsequent delta is all maintained in your source system
please check Notes 852443,424848,834229
Hope this helps
Thanks
Teja
Message was edited by:
Teja badugu

Information truncated after résolving the REP-1814 error

Similar Messages

Maybe you are looking for