Infoset with ldb IOC - error in selection parameter

Hi Expers,
could any of You pls help me with an issue - creating infoset with ldb, and get error in selection parameter definiton.
I am about to create an infoset than a query, using IOC logical database, and get a couple of error message related to selecion parameters - such as: error in sel. parameter P_PICK is - Statement concluding with "...TYPE" ended unexpectedly.
I do not really need this parameter for my selection, so I was to delete - but I could not find it amongst the selection fields in actual infoset. When I tried to create it, I got a message: it has already been created (of course), but where can I find / change it if not amongst listed selection parameters (Extras / Selection)
I suppose I can not make any changes in DBIOCSEL - because COOIS is also using this ldb - and it might have some unexpected effect there as well.
Later I started to create a Z*report via SE80, using same ldb, and it works fine.
So it is not a burning issue any more, but still interesting, why infoset has problem with the sel. parameter which is actually not in use.
All usefull answer is appreciated
Br

Hi,
the selection screen is coded without a number. Here's the code:
SELECTION-SCREEN BEGIN OF BLOCK selection WITH FRAME TITLE text-t11.
SELECTION-SCREEN BEGIN OF BLOCK persdata WITH FRAME TITLE text-t01.
SELECT-OPTIONS so_pernr FOR ls_pa0017-pernr.
SELECTION-SCREEN END OF BLOCK persdata.
SELECTION-SCREEN END OF BLOCK selection.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-t12.
SELECTION-SCREEN BEGIN OF BLOCK zeitraum WITH FRAME TITLE text-t02.
PARAMETERS pa_begda TYPE p0017-begda DEFAULT sy-datum OBLIGATORY.
PARAMETERS pa_endda TYPE p0017-endda DEFAULT '99991231' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK zeitraum.
SELECTION-SCREEN BEGIN OF BLOCK gruppierungen WITH FRAME TITLE text-t03.
PARAMETERS pa_spebe TYPE p0017-spebe OBLIGATORY DEFAULT '1'.
SELECTION-SCREEN END OF BLOCK gruppierungen.
SELECTION-SCREEN BEGIN OF BLOCK zuordnungen WITH FRAME TITLE text-t05.
PARAMETERS pa_bukrs TYPE p0017-bukrs MATCHCODE OBJECT c_t001 DEFAULT '2000'.
PARAMETERS pa_gsber TYPE p0017-gsber MATCHCODE OBJECT h_tgsb DEFAULT '0001'.
SELECTION-SCREEN END OF BLOCK zuordnungen.
SELECTION-SCREEN END OF BLOCK input.
SELECTION-SCREEN BEGIN OF BLOCK attributes WITH FRAME TITLE text-t13.
PARAMETERS pa_test AS CHECKBOX DEFAULT 'x'.
SELECTION-SCREEN END OF BLOCK attributes.
Regards
Mark-André

Similar Messages

Working with LDB without selection screen

can' we take input through file without any selection screen when we are working with LDB?
Please focus on this.
Regards
vamsi.

Hi,
yes, u can make use of :
SET PARAMETER ID command.
SET PARAMETER ID pid FIELD dobj.
Effect:
This statement sets the content of the SPA/GPA parameter specified in pid to the content of the data object dobj. For pid, a flat character-type field is expected that can contain a maximum of 20 characters, which cannot be exclusively blank characters. pid is case-sensitive. For dobj, a flat, (as of release 6.10 character-type) field is expected, whose binary content is transferred in an unconverted format.
If the SPA/GPA parameter specified for the current user in pid does not yet exist in the SAP memory, it is created. If the SPA/GPA parameter has already been created for the current user, its value is overwritten.
In a program, SPA/GPA parameters can only be created or assigned values if a name exists for them in the table TPARA. The extended program check reports an error if it can statically determine that a name specified in pid is not contained in the database table TPARA. ist.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Error when select sheet for Excel file from Excel 2013 with visual basic

Dim AppXL As Object
Dim MyWorkBook as Object
Set AppXL = CreateObject("Excel.Application")
Set MyWorkBook = AppXL.Workbooks.Open("E:\MyFile.xls)
AppXL.Sheets("Sheet1").Select
The above code run with no problem when use in machines with Excel 2007 and Excel 2010.
But when run in machine with Excel 2013, error with "Out of Range" occur. Kindly advise for any solution.
TS Lim

With your highlight on the AppXL.Workbooks.Open, I have solved the problem by re-position the statements.
Below are the 2 situation which works in for Outlook 2007, 2010 and 2013
Situation 1, work for Outlook 2007 and 2010 but d not 2013
With AppXL
Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFile.xls")
Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
WorkBookFrom.Activate
.Sheets("Sheet1").Select
.Range("A1:IV65536").Select
.Selection.Copy
WorkBookTo.Activate
.Sheets("Sheet1").Select
.Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
.Range("A1").Select
WorkBookTo.Save
End With
Situation 2, work for Outlook 2007 and 2010 and 2013
With AppXL
Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFiel.xls")
WorkBookFrom.Activate
.Sheets("Sheet1").Select
.Range("A1:IV65536").Select
.Selection.Copy
Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
WorkBookTo.Activate
.Sheets("Sheet1").Select
.Range("A1").Select
.Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
WorkBookTo.Save
End With
Thank you for indirectly help me to solve the problem.
TS Lim

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Multiple select parameter with each selected value covering multiple sub values

Hello, everyone,
In my SSRS report, I need to set a multiple select parameter called Group, with values: group1 group2, etc....
When group1 is selected, it needs to apply to data of certain sub groups: sub-group1, sub-group2;
When group2 is selected, it needs to apply to data of different sub groups: sub-group3, sub-group4 and sub-group5;
when both group1 and group2 are selected, then, it needs to apply to data of sub-group1 to sub-group5.
I know how to do it when only one group is selected: simply use a case statement in the query to select the right sub groups based on the group selected.
But I don't know a good way to do it when multiple groups are selected.
Any help, pointers are much appreciated. Thanks in advance!
Regards

Hi QQFA,
If I understand correctly, there are two parameters (Group and Sub_group) in the report. When we select group1 in Group parameter, it will auto select sub-group1, sub-group2 in the Sub_group parameter; when we select group2 in Group parameter, it will auto
select sub-group3, sub-group4 and sub_group5 in the Sub_group parameter; when we select both all, it will auto select all sub_group values. If I have misunderstood, please don't hesitate to let me know.
In this scenario, we can create a temporary table with Group and Sub_group columns, then select Sub_group column values based on the Group field. For more details, please see:
Create a dataset with the query below:
CREATE TABLE #temp([group] nvarchar(50),sub_group nvarchar(50))
INSERT INTO #temp VALUES ('group1','sub-group1'),('group1','sub-group2'),('group2','sub-group3'),('group2','sub-group4'),('group2','sub-group5')
SELECT * FROM #temp
where [group] in (@Group)
Set available values and default values of Sub_group parameter with get values from the sub_group field in the new dataset.
Note that the two parameters are all multiple parameters.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Problem using SELECT-OPTIONS in an InfoSet with a field of data type UNIT.

I have created a simple InfoSet that links MARA with MARM. In the 'Selections' section of the InfoSet I have a variable named 'ZMEINH' defined as
Description: UOM
Selection Text: UOM
Format FOR: MARM-MEINH
EXTRAS: DEFAULT 'PAC' OPTION EQ SIGN I.
When I ran a query to allow selections on the MEINH field, instead of 'PAC' being the default, there was "***" showing in the UOM selection and if I attempted to execute the query it gave me a message that "Unit *** is not created in languague EN'. If I overide the "***" and enter 'PAC', I get the list of records that I expect.
I assume this is because MEINH has a data type of "UNIT".
How can I do a conversion so I can define a default value 'PAC' for MARM-MEINH in the infoSet that will carry through to any queries I created.
Thank you very much for any help.
Richard Salisbury

Thank you both for you help!
In our T006 there actually is a PAC and not a PAK. The T006A had as DE-PAK though.
I had this same type of language problem when trying to match an "order type". German is the "base" language in our system so maybe that means that raw data is stored with the German constant?
Anyway, I changed it to PAK and it works. When under a time schedule, that is what counts.
Thank you again for the quick response!
Richard Salisbury

Conditional format with large data fails and show error as "Selection is too large" in Excel 2007

I am facing a issue in paste special operation using conditional formats for large data in Excel 2007
I have uploaded a file at below given location.
http://sdrv.ms/1fYC9qE
The file contains two sheets, Sheet "Data" contains the data on which formats are to be applied and sheet "FormatTables" contains the format tables which contains conditional formating.
There are two table in "FormatTables" sheet. Both have some conditional formats applied on it.
Case 1:
1. Select the table range of Table1 i.e $A$2:$AV$2
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
It throws error as "Selection is too large"
Case 2:
1. Select the table range of Table2 i.e $A$5:$AV$5
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
Formats get applied successfully.
Both are the same format tables with same no of column and applied to same data range($A$1:$AV$20664) where one of the case works and another fails.
The only diffrence is Table1 has appliesTo range($A$2:$T$2) as partial of total table range($A$2:$AV$2) whereas the Table2 has appliesTo range($A$5:$AV$5) same as of its total table range($A$5:$AV$5)
NOTE : This issue is only in Excel 2007

Excel 2007 No Supporting formating to take a formatting form another if source table has more then 16000 rows and if you want to do that in more then it then you have ot inset 1 more row in your format table to have 3 rows
like: A1:AV3
then try to copy that formating and apply
Solution Case 1:
1.Select the table range of Table1 i.e AV21 and drage it down to one row down
2. Select the table range of Table1 i.e $A$2:$AV$3
3. Copy it
4. Goto Sheet "Data"
5. Select data area i.e $A$1:$AV$20664
6. Perform a paste special operation on full range and select "Formats" option while performing paste special

ME2N report with selection parameter GROB

When I run the report Me2n with the selection parameter GROB - Rough GR, I get only the POs whose inbound delivery has been made.
But I dont get those POs whose ROUGH GR has been made.
Why does this happen??
How can i get those POs whose Rough GR has been made but actual GR is not made yet?

Go to SPRO-Mat Mgmt-Purchasing-Reporting-Maintain Purchasing Lists-Selection Parameters-Define Selection Parameters and select your Selection Parameter GROB and click on details there you can see the option Rough GR Qty here input > 0 then system will display only Rough GR's.
Note : If Notified Qty >0 alone selected then system will display po's only with vendor confirmations.

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

""selected font failed during last operation." and " there is a problem with generator" application error

For PSDs I have created in older versions of Photoshop CC 2014 I am getting errors when opening / trying to save. They seem to be either Generator or font related. Interestingly, PSDs created in newer versions of PS CC 2014 have no issues, even when using same fonts.
I am getting the error messages:
When I open the older PSD files, (again created or saved in older versions of PS CC 2014) I am asked to update fonts. If I do I get the error.
'Selected font failed during last operation'
When I try to don't try to update fonts and then I try to play with the file I get the following error.
'There is a problem with Generator. Please quit Photoshop and try again. If the problem persists, remove any third-party plugins or try re-installing photoshop.
I don't have any third party plugins that I can see.
I have re-installed multiple times.
I need to use this program and I am paying for your services. I am actually on the phone now with 'help desk' and have been on hold for 22 minutes.
Please Help

When I installed the Apple programs, mobile device application did not uninstall by itself. I had to go to c://program files/common files/apple/mobile device application (or something like that) and manually delete the contents and the folders. I have a 64 bit version so I also had to visit c://program files (x86)/common files/apple/mobile application device (or similar) and also manually delete the files and folders. I had to delete the files before I could delete the folders. This manual part is probably tripping everyone up, because it's not as easy as simply hitting uninstall in the control panel. But the instructions are there. I hope this helps you.

Error "Please select an instance of compliance with shipping instructions "

Dear All,
Please provide a non manual solution to the issue ......
Error "Please select an instance of compliance with shipping instructions "
Regards,
Vikas

Done Manually .............

Control.invoke() throws System.ArgumentException with Error message as 'Parameter is not valid'

Hi All,
While doing cross thread communication, i am getting System.ArgumentException with Error message as 'Parameter is not valid' when call is made on the control.invoke(delegate method, parama object[]).
I have checked the parameters, all parameters look good.
Please share your views on this.

I am going to explain the following Exception schenario.
The RenderForm() is called from different thread and initially panel.InvokeRequired is true as it gets called from different thread and then invoke() gets called.
So again same method is getting called and InvokeRequired property has then changedd to false and then else part of the code is executed however if i call the RenderForm() repetadely then application throws the exception as stem.ArgumentException with Error
message as 'Parameter is not valid'
And the Exception stack trace is as below-
Type: System.ArgumentException
Message: Parameter is not valid.
Source: System.Windows.Forms
TargetSite: System.Object MarshaledInvoke(System.Windows.Forms.Control, System.Delegate, System.Object[], Boolean)
StackTrace: at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
StackTrace: at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
StackTrace: at NCR.APTRA.RendererCore.RendererCore.RenderForm(TTUForm form, IDataRecord data, Boolean clear)
Adding the code snippet:
private void RenderForm(TTUForm form, IDatRec.IDataRecord data, bool clear)
if (panel.InvokeRequired)
panel.Invoke(new RenderFormInvoke(RenderForm), new object[] { form, data, clear });
else
//logic to draw the window content
Please help me on this.. Thanks..

Infoset with ldb IOC - error in selection parameter

Similar Messages

Maybe you are looking for