Infotype Update gives error

Hi,
I tried to update infotype 0000 with HR_INFOTYPE_OPERATION.
It gave me a error with name ASSIGN_BASE_TOO_SHORT
Following is the error analysis.
Pls guide me.
Error analysis
    The source field is too short.
    In the running program "SAPLHRMM" a field should have been assigned to a field
    symbol, which is shorter than the type of the field symbol.
    This is not possible.
    It is a statement of the form ASSIGN f TO <fs> CASTING...
    or ASSIGN f TO <fs> with a field symbol that was created with the
    STRUCTURE addition.
I have called my FM like this.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
          number = WA_p0000-pernr.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY                  = '0000'
          NUMBER                 = WA_P0000-PERNR
*   SUBTYPE                =
*   OBJECTID               =
*   LOCKINDICATOR          =
         VALIDITYEND            = P0000-endda
         VALIDITYBEGIN          = p0000-BEGDA
*   RECORDNUMBER           =
          RECORD                 = WA_P0000
          OPERATION              = 'MOD'
         TCLAS                  = 'A'
         DIALOG_MODE            = '0'
*   NOCOMMIT               =
*   VIEW_IDENTIFIER        =
*   SECONDARY_RECORD       =
       IMPORTING
         RETURN                 = w_return
*   KEY                    =
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = WA_p0000-pernr.
TIA.

Hi ,
I am also using the same function module and it is giving me the same dump can you let me know how did you solved the problem.
Error in ASSIGN in the program "SAPLHRMM".
Regards,
Manohar

Similar Messages

Ios 5.1 OTA update gives error message ( unable to check for update - an error occured while checking for a sofware update ), can anyone help ?

i am trying to download the latest ios 5.1 but the OTA update gives me a error message ( unable to check for update - an error occured while checking for a sofware update )
the same thing happens in my ipad too.

Thank you! I've been trying all day to get this to work! and finally i found the answer!
amensistech wrote:
I found a fix for this.
Go to Wifi Settings and then select your Wifi Network. Tap the blue arrow to go into Wifi settings and then select the DNS tab.
Set the DNS to 8.8.8.8 and then go back to the software update page.
This time it shall work.
I tried it on an iPad 1 running iOS 5.0.1 but I am sure this shall help.
Do rate me and reply if it works.

2 iphone 5 update gives error 3 and error 1669???

i have here 2 iphone 5 that i update to ios7 and gives error, one is error 1669 another is error 3 what this this error means????

how to fix error 1669
STEP 1: Delete iTunes from your computer. Also make sure you remove the cache(open itunes then press edit wich is located on the tool bar and then click on preferences and then go to advanced and click on reset warrnings and reset cache).
then go to your hard disk and go to program files and delete folder named itunes.
Note: If you have any libraries or locally cached data that you want to keep, temporarily store them somewhere until you get the situation fixed.
STEP 2: Once it is completely deleted, download iTunes 11.1 from Apple servers.
STEP 3: Download iTunes 11.1 from here.
STEP 4: Now connect your iPhone, iPad or iPod touch to computer.
STEP 5: Click “restore”, it should present you with a notification saying a new version is available.
STEP 6: Simply Click download and install, and sit back and relax.
The process should be completed and your error 1669 should be fixed.

IPad 3 won't start up (broken screen aswell) and when restoring/updating gives errors 3194 or 4005

Like the title says, I have an iPad 3 from a friend which has a broken screen and won't start up anymore. He is not sure whether it's just the screen or
something else aswell. So I'm able to get it recognized by itunes if I put it in recovery/dfu mode. Then I try restoring it but I get the error 4005 most of the time.
It has nothing to do with the solutions given when I search for error 4005 on google (like hosts file and stuff) because I can easily update my iPhone and my sisters' iPhone. With a program called TinyUmbrella I'm able to get it recognized in iTunes WITHOUT the ipad being in recovery mode, because the program has an option to kick it back out of recovery mode. Then I'm able to access the pictures and delete apps all that stuff in itunes/windows, but I still do not get anything on the screen. So then I tried updating to ios 7 because the iPad was still on ios 6.1.3 but then I get error 3194 which is kinda the same as 4005. Also tried restoring but that gave the same error.
So now i'm unsure whether the iPad would work if I replace the screen, because it seems to function properly when I can kick it out of recovery with TinyUmbrella. But then I thought, even if I did replace the screen, I still wouldn't be able to update the OS or restore? I don't want to waste my money replacing the screen if it won't even work afterwards..
Yes I tried different usb ports, yes I tried different cables, yes I tried the hosts file thing, I don't have an antivirus installed (only 'antivirus' I have is malware bytes, windows firewall is off, tried on a different computer, tried on a mac, ... I don't think this is the reason because my iPhone updates perfectly.
I did notice though that when restoring when the iPad is in recovery that it would say "waiting for ipad" but then my windows pc says "usb device not recognized" , maybe this has something to do with it?
Solutions please?
Thanks in advance

A PRRAM reset did the trick.
http://docs.info.apple.com/article.html?artnum=2238
This Mac mini is a refurbished one, so probably had some old settings from being connected to something different before.
The TV now is recognized properly as 'Philips FTV'.
Marc

My computer will not update gives error 8007007E. Need help

Please advise how to fix error code 8007007E

Hello G. Faye.
As a first step, try using the Windows Update Automated Troubleshooter: you can find it at
https://support.microsoft.com/gp/windows-update-issues/en-US.
If this doesn't solve your issue, try resetting the Windows Update components: read the Microsoft Knowledge Base article
971058 to know how to do that.
Bye.
Luigi Bruno
MCP, MCTS, MOS, MTA

HCM process & Forms - Need logic to handle the Error's when Infotype Update

Hi Experts,
Currently im working with HCM process and forms workflow's. I have ten HCM workflow's and everything is working fine.
Now the issue is, at the time of save, if there is any error like infotype lock or any other Master data error's, then the standard task responsible for save the data, returns the Status as Error.
Already the approval process for the request is carried out, and it can not be make it again. So I need to save the data without re execution of the process or without re-approval.
I searched in standard workflow also. There is no option to handle the Infotype update Error's.
So can any one give me some hint about this? Without the re-initiation i need to save the data's.
Thanks for your time and Suggestions.

If you are using the framework to update specific infotypes and they are locked for "no apparent" reason you'll want to open an SAP message. I would highly discourage you from going down the path of calling that FM, from within workflow no less. Workflow in the framework was not intended to do such operations, this is supposed to be handled in the decoupled infotype framework (through configuration)... not to mention you won't be using the dec. infty framework by calling that function.
While I've had to do this before, it was because of a limitation in the framework not something as trivial as a locked infotype. Who knows, it might actually be locked for a legitimate reason?
Andy

How to Update a clob column..it gives error string literal too long

I am trying to update a clob column of a table but it gives error string literal too long plz tell me what's the issue
ORA-01704: string literal too long

Peeyush wrote:
I am trying to update a clob column of a table but it gives error string literal too long plz tell me what's the issue
ORA-01704: string literal too longThere's a problem with my car. It won't start. Why won't it start? Please tell me!
Oh wait, you can't, because I haven't given you nearly enough information...
In other words, if you would like help in trying to work out where you've gone wrong, you should provide a small enough example of your code that demonstrates the error. We might then actually stand a chance of being able to help you!

XL Reporter gives Error after updating from PL 25 to SBO 2005 B PL 38

Thnaks Shridhar,
I have tested it in PL 38, its work fine but it has occoured one more problem i.e. XL Reporter is not working now.
However I have updated XL Reporter to PL30, but it gives error.
It has reamed used userdefined fields of the report. I have correct it too. But it gives error " Expansion has problem ".
Can any body has idea for running XL reporter successfully after updating patch level.
Can any one has faced this error or have solutions.
Pl. Help. so that i can updating it to Final Live Database.
Warm Regards,
Chintesh Soni

Hi..Shridharan,
Thanks for reply and guidance....!!
But I have successfully installed the XL Reporter means upgraded.
Now, When I am running existing reports which are preapred in previous version, is not running. It gives error i.e. Expansion has problem.
B4 this error, it has shown me some other error for user defined field was not found, when i have checked, the upgradation of patch level has changed the name of UDFs.
I have modified the udf names in the report.
Can u identify wht is the problem exactly please..
With Warm Regards,
Chintesh Soni

HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

Hi,
I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

Click here and follow the instructions.
(99025)

Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?

Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?

Like many others I have been reading about online I am having the same error. I tried the fix listed above and simply wasted 30 minutes of my time. I scheduled a time for Apple to call and help me through this and their solution was for me to call Microsoft for some reason?!! iTunes made me upgrade then stopped working - I really don't see how this is a Microsoft problem??
Like Darren if a solution is not found quickly I will also have to sell my phone as the only way to get videos and music on my phone is through the software that you made me upgrade, broke and won't help me fix.

My macbook pro is version 10.7.3 and since I bought it, I try to update but it gives error, what should i do?

My macbook pro is version 10.7.3 and since I bought it, I try to update but it gives error, what should i do?

What are you trying to update? Are you trying to do a Software Update from the Apple menu, or something else?
What is the error you're seeing? We are not mind readers.
Matt

HT1386 I have iphone 4, and couldn't update to ios7.1.1 even though its downloaded, gives error message as not connected to internet, even though am connected

I have iphone 4, and couldn't update to ios7.1.1 even though its downloaded, gives error message
Unable to verify update
ios 7.1.1 failed verification because you are no longer connected to the internet
Close Try again
Event though I am connected to the net
Tried repeatedly but frustrating. Am able to do the same in another iphone 4 which my brother has....Do not know what setting to change. Even cant update via itunes

Hi GajaPsy,
If you are getting errors or alert messages when you try to update your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

Trying to install software update, phone stopped responding and gives error code 9

While trying to update software on my iPhone 4, it stopped during installation and gave error code 9, now it says the phone must be restored but will not complete the installation and still gives error code 9, very frustrating. I tried on 3 different computers, same results.

reset preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
if that fails to solve the problem, restart in safe mode and test. if ae works, you have a conflicting non-essential program. you can use your activity monitor to find it.
if restarting in safe mode fails, uninstall, clean (Do a clean install) and reinstall ae.

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

"software update" "An error occurred while checking for updates"

When I click on "Software Update", an error results, "An error occurred while checking for updates". It is definitely connected to the internet. I was gifted a G5 and I installed a new hard drive and loaded the OS, OS X 10.3.5. That version of Safari does not display pages correctly. E.g., support.apple.com/downloads just clocks on the righthand side of the page.
Because cannot access that link, cannot manually update the OS - I was thinking this version is "old" and as a result, unable to connect to apple's update server. Thanks.

Thanks, I upgraded with your info.
Ultimately, I am trying to access mail.google.com but receiving the following error with opera v9.5.x: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
Safari gives the following: Some important features may not work in this version of your browser, so you have been redirected to the Basic HTML version.
I can access ask.com and using opera to type this response.

Infotype Update gives error

Similar Messages

Maybe you are looking for