Infoview Prompt Page for CR2008: SAP/view.do vs CrystalReports/viewrpt.cwr

Hi Experts:
I have some Crystal Reports published in a BOE XI 3.1 repository to access by InfoView. This reports collect data from a BW MDX query and have parameters that the end-users need to inform.
When I view a report by Infoview in my development environment I receive a prompt page thats points to http://<myboeserver>/CrystalReports/viewrpt.cwr.
But when I view the same report in my production environment I receive a diferent prompt page thats points to http://<myboeserver>/SAP/view.do.
I made no specific configuration in any of the servers but I think there must be some setting for this because both servers show different prompt pages for the same report.
I would like to use the same prompt page in both environments and I need to find a way to set to CrystalReports because my end users prefer to use this viewer.
So, where could I make this setting?
Both servers have this system setup:
OS: Windows Server 2003
BOE XI 3.1 SP2 FP 2.9
BOE SAP Integration Kit SP2 FP 2.9
Best Regards,
Alessandre Haua

Hi tfragner!
Do you have any update for this question? I have a similar issue. Here the link for my [thread|Infoview Prompt Page for CR2008: SAP/view.do vs CrystalReports/viewrpt.cwr;.
Thanks in advance.
Alessandre Haua

Similar Messages

  • How to change Infoview Home Page for Usergroups

    Hello,
    I'm using Crystal Reports Server 2008 in german. I'm looking for a way to change the default Home Page to a different page. (e.g. My Infoview, or a created folder) I know how to configure it when I login a user. I want to configure it for a usergroup without login in each user ones. (Since I use AD-Authentication I don't know the passwords, anyway)

    Hello,
    does no one else have this problem? If some information is missing please feel free to ask. There must be a way to configure it.

  • Cannot create 'download' page for inline PDF viewing with IE

    Description of Problem:
    Typically, when you want to transfer a file to the client via code (cuz the
    file is in a db, for example), you create a page that will change the
    response headers and then spit out the file for them to download.
    This works, however something with the response headers make it so IE does
    not display a PDF if the 'Display PDF in browser' is turned on in the
    Acrobat Reader. The page loads, but is blank.
    code:
    response.setContentType("application/pdf"); //this works well
    response.setHeader("Content-disposition","inline; filename=" +"report.pdf" );
    response.setContentType("application/pdf;charset=GB2312"); // can't work
    response.setHeader("Content-disposition","inline; filename=" +"report.pdf" );
    when response header containt national char
    must set "useResponseCTForHeaders = true" in sun-web.xml and must use setContentType charset =XXX
    Actual Results:
    A blank page is shown
    Expected Results:
    The PDF is shown in the browser using the acrobat reader plugin.
    How often does this happen?
    Every time

    hi kglad
    thanks for the help im almost there but still not getting it
    so currently my code is set up for an action over a button
    using
    on (release) {
    getURL("www.mysite.com/my.mp3","_blank");
    so do I keep the on(release and then add in the on (release)
    then add in which part of the filereference class??
    import flash.net.FileReference;
    var listener:Object = new Object();
    listener.onSelect = function(file:FileReference):Void {
    trace("onSelect: " + file.name);
    listener.onCancel = function(file:FileReference):Void {
    trace("onCancel");
    listener.onOpen = function(file:FileReference):Void {
    trace("onOpen: " + file.name);
    listener.onProgress = function(file:FileReference,
    bytesLoaded:Number, bytesTotal:Number):Void {
    trace("onProgress with bytesLoaded: " + bytesLoaded + "
    bytesTotal: " + bytesTotal);
    listener.onComplete = function(file:FileReference):Void {
    trace("onComplete: " + file.name);
    listener.onIOError = function(file:FileReference):Void {
    trace("onIOError: " + file.name);
    thanks a lot for your help!
    var fileRef:FileReference = new FileReference();
    fileRef.addListener(listener);
    var url:String = "
    http://www.macromedia.com/platform/whitepapers/platform_overview.pdf";
    if(!fileRef.download(url, "FlashPlatform.pdf")) {
    trace("dialog box failed to open.");
    }

  • How to make the Pager for table view as non editable?

    Hi,
    I am using an HTMLB pager for my table view .
    It appears as Page '1' of 2 for examle.
    But '1' is dispalyed in an input field.
    How do I make this input field as disabled.
    I just want to use the Vertical and horizontal indicators to traverse through the pages of the table view.
    I do not want the user to enter the page number ..
    Thanks,
    Sachin

    Look at SBSPEXT_XHTMLB sample, pages pager.bsp and pagerX.bsp.
    If you use the external pager, then you can specify a format where a text string will only be displayed without an inputfield for editing.

  • What is the diffrence between SAP View and CAD View ?

    What is the diffrence between SAP View and CAD View ?
    What is the main purpose of SAP View
    and
    What is the main purpose of CAD View
    On SAP help i found
    SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
    CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
    BUT I did not understand it well
    Can someone explain this with an example
    THanks
    Raj

    Hello Raj,
    SAP View  can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
    CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
    hope this helps. Let me know if you have further questions else please close the message.
    regards
    N K

  • Does anyone know how to exclude footnotes from the word count in the Pages for iPad app?

    If I create a doc on pages for ipad, then view it on the iMac, the word count is lower.  I figured out that this is because Pages counts all the words in the footnotes.  Does anyone know how to make it exclude footnotes from the word count? 

    I see the exact same behavior on my IPAD(s) and IPHONE(s). This isn't the loss of titles already identified in other posts. Every movie that wasn't purchased from iTunes, meaning all my movies of my kids, shows it sync in iTunes, but doesn't show up anywhere on the devices.
    Help Apple! Please un-break the feature that was functional before.

  • Suppress Export Option Using Crystal Reports Web Report Viewer (viewrpt.cwr

    We have an existing Crystal Report that is being displayed using the Crystal Enterprise Web Viewer (viewrpt.cwr) in a call like this: http://<servername>:8080/CrystalReports/viewrpt.cwr?id=<an id value>etc.
    When the report is displayed, the toolbar has an export icon that allows the user to export the report to PDF, Excel, etc.
    I want to suppress the export feature, but retain the print feature.  I have read the documentation that I could find on the web for this viewer and have been unable to find a way to do this.
    Does anyone know how this could be done or a different way to display the report with a different viewer that would avoid having to redesign the report itself?

    CMC is Central Management Console. Logon to CMC
    http://server:8080/businessobjects/enterprise115/admin/en/admin.cwr
    Now select the report from the folder and click on the tab Rights and click on the advanced option for the user and here Under the report you have an option "Export the report data" check the deny option for this and apply. Now this option will apply for that particular user only, if you want to apply for all the users under one group then click on advanced for that group and change the option.
    Regards,
    Raghavendra.G

  • SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

    Hi Experts,
    Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
    I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
    Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
    1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
    2) If not, Why system did not prompted me for a transport?
    3) Then How Can I attach my CDM/changes to a transport?
    Thank you

    I don't think we get a TR prompt when adding a view in BD64.
    You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

  • Crystal Reports prompting for creds when viewed from BO 4

    The environment:
    Business Objects Enterprise 4, sp2 patch 8
    SAP ECC 6.0, kernel 701, sup. pkg. lvl 137
    This is a new BOE 4 installation on a test system.  The BOE installation has been configured to use Windows AD authentication with SSO.  When I run a Crystal Report that is based on SAP ECC data, I am prompted for credentials.  So I used the following document to configure BOE for SSO to DB:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
    This didn't fix the problem.  SAP ECC reports in BOE still prompt for creds when viewed.  SAP Authentication is verifiably working, but I'm not sure if SSO to DB is working.  One thing I've noticed is that when I log in to BOE using SAP authentication and view the report, I'm not prompted for creds.  In BOE I added my Windows AD acct as an alias in my SAP acct, but I may have either done this incorrectly, or there may be something I need to do in addition.
    question 1:  Is there an easy way to verify if SSO to DB is working correctly?
    question 2:  In CMC --> Authentication --> SAP --> Entitlement Systems --> User Name, I'm assuming that this is an SAP user name.  What roles/profiles does this account need?  Should it be a dialog acct?
    question 3:  Our ECC system is configured to use SNC.  Do I need to configure SNC in BOE for SSO to DB to work?
    question 4:  I added my Windows AD user as an alias on my SAP user record.  I'm not sure this is correct...  can someone verify?
    Any help or suggestions are much appreciated.

    Thanks, Ingo.  Once I got snc configured, everything began working wonderfully.
    I used this document as a guide:
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134343630363726

  • Creating second InfoView entry point for SAP users in XI 3.1

    Hi All,
    I have BOE XI 3.1 up and running with the Business Objects Integration kit SAP Solutions kit I would like to create a second infoview entry point for SAP users on the same physical box (single server) as regular InfoView. 
    I am trying to mock this up and have detailed the following steps below.  I suspect I am missing a few steps (for example, where do I specify the entry port?).  I am sure step 2 is wrong, as I the desktoplaunch no longer exists in Xi 3.1
    1.  Copy the InfoView.war file to a new directory ( Program Files/Business Objects/ Business Objects Enterprise 12.0/java/applications/sap).  I imagine I would need to rename the war file (say SAPInfoview.war)?
    2.  Create a xml file with the following logic (the part in bold I consider to be wrong...):
    <Context docBase="Program Files\Business Objects\Business Objects Enterprise 12.0\java\applications\sap\SAPInfoview.war" path="/
    businessobjects/enterprise115/desktoplaunch"
    crossContext="false" debug="0" reloadable="false"
    trusted="false"/>
    3.  Save the xml file (what name? does it matter) in Program Files\Business Objects\Tomcat55\conf\Catalina\localhost
    4.  Restart Tomcat
    5.  Change the web.xml to make SAP security the default.  But this should not be the regular infoview web.xml.  I'm not sure where this would reside.
    Thanks,
    Steve
    Edited by: Steve Bickerton on Jan 15, 2009 9:19 PM

    Hi Ingo,
    You've been working with Duncan and Sartaj on this.  The client has two set of users:  non HR which has no BW or R/3 authorization restrictions, and HR, which has authorization restrictions.
    They have deployed SSO using AD for the non HR users.  They also want to leverage InfoView rather than the SAP portal.  For the HR users, we therefore need to capture the SAP id and password at login time to enforce security at the BW and R/3 levels.  We could use the existing Infoview entry point (SSO will fail and they will be prompted for a SAP login).  I do remember that we offered a second InfoView entry point for SAP users in XIR2.  I thought this may be more elegant.
    Thanks,
    Steve

  • To view reports in new page for each cutomer using Report Designer

    HI all
    I have a requirement to view the data (key figures) for each customer in a new page.
    I have created the same using the Report Designer tool.
    Now there is setting for this Group Header 'Customer' i have selected the option 'repeat group header on each page'
    still the query when generated, gives fine results for certain cases but not for all.
    like it will show the each customers in a fresh page for some pages , then in midst there would some 2-3 customers in the same page.
    There is no relation between these customers , they are same as the other customers, no difference at all.then i am not able to figure out the reason why it is behaving so odd.
    Thanks
    Ramesh

    Ramesh,
    right now there really is no way to solve what you are looking for.  There partial solutions, but you will not be able to force a page break in a dynamic report.
    Here is what I have faced, and what I have come up with so far:
    I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure.  I need to be able to re-use the header and the general report design with 6 reports.  Here is my solution:
    1. Create an outline of the report.  I did all the formatting by creating a report section for each page.  You can force page breaks between the pages.  Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
    2. Insert all you page breaks and do all the formatting.
    3. Insert an infoprovider.  Once in, you can just drag and drop the key figure cells into your formatted report.
    4. Create additional modification for formatting as needed.
    This fixes my problem (for now), but I had to do a lot of work to come up with this.  Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report.  I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
    The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
    I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
    good luck
    Pavel

  • How to set a page template for news detailed view?

    Is there a way to set a page template for the detailed view of the news module?
    I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is designed to work or is there a way I can specify it to use a different page template?
    Dave.

    Hey Dave, See the image below:

  • Urgent - Not able to Print back page for Last Page in SAP Script.

    Hello All,
    I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
    For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
    Please Help.
    Thanks.

    hi,
    Yes, we can print logo as water mark in scripts
    Just do as like this....
    Upload your logo via SE78.
    - Select 'Import' button from application toolbar of SE78, and perform upload.
    and write this code in scripts
    BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL 
    regards
    Sankar

  • Rows per Page for PIVOT view.

    Hi,
    Is there any way we can show limited no of rows in pivot. Rows per Page for PIVOT view.
    on the click on next one should move to the next page.
    Thanks

    Pagination in Pivot Solves your problem at UI Level only.
    Below is the link that guide you how to implement Pagination in Pivot:
    [http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/]
    Hope it helps you..
    -Vency

  • How do you bypass the proxy for local addresses? It keeps prompting me for user id and password to access an intranet page

    When trying to launch an intranet web site, it won't connect. It prompts me for a user id and password. I can get to external sites, and I have already added the site into the "No proxy for" dialog box

    It depends where you publish your pages.
    At MobileMe you can password protect a Site in iWeb. A Site is a collection of pages. If you want to protect a single page for a single person, you have to create a Site with one page and protect it.
    When publishing at a 3rd party webhost, you can password protect a page or directory in a administration panel. Check with your host. iWeb is not involved there.

Maybe you are looking for