Infrastructure management

Hi,
can someone tell me what is "Infrastructure management" in sap. is that a part of SAP HR or is it a completly diffrent module or what...?

I think you want to Search for the Proxy Definition DestinationSI and manually create a new logical port for that destination. For that you need to go through the way i have given above and then you can proceed.
regards
Pankaj

Similar Messages

Prime Infrastructure Manager 1.2 and Apple IPad

Is there a way to run Prime Infrastructure Manager on an IPad?

You can download the utility to run the cisco Prime
https://itunes.apple.com/us/app/cisco-prime/id556600515?mt=8
and other app created by cisco the may be helpful
http://www.cisco.com/web/about/facts_info/apps/ciscoapp.html?CAMPAIGN=tomorrowstartshere&COUNTRY_SITE=us&POSITION=vanity&REFERRING_SITE=vanity&CREATIVE=vanity+to+mobile+app

Confusion for switching my career from IT Infrastructure Management to SAP Basis or not?

Hi Guru's,
I am in IT Infrastructure Management and I have more than 10 years of working experience in multiple companies. I have completed MCA, BCA, CCNA and ITIL and in my last job I was Sr. Manager IT.
I started my career as a Customer Support Engineer in 2004 and then promoted as a Network Engineer and then Team Leader and then Project Manager and then Asst. Manager IT and finally Sr. Manager IT. I switched 6 companies (ISP,IT,Pharmaceutical, Education etc.). Unfortunately my field demands lot of hard-work and payed very little(I got only 5 lac pa) on the other hand I saw several people who moved in SAP they get higher salaries and growing rapidly.
I have good knowledge of system administration and network administration. In 2008 to 2011, I worked for a Pharma company(Production Plant) where I saw SAP implementation and was little involved in it. I was involved in client Installation, SAP Solution Manager roll-out etc. I saw SAP basis syllabus and I feel it is easy for me to learn the BASIS fast rather then other SAP modules.
Now my questions are:-
Is it worthwhile for me to switch my career in SAP Basis?
Will the recruiters consider me as a fresher or they consider my experience?
What is the future growth in SAP Basis with our without certification?
Which is the best institute to get the training and job placement?
Your suggestions are appreciable.
Yours faithfully,
Anand

Hi Basis like all work in sap is hard in begin you will receive moore with experience and knowledge.
Please see this link of basis comunitty . You can talk with great professinals in forum that comunitty they can help you .
<<Link removed>>
<<Moderator Comments: Career-related questions are supposed to be asked here not in other forums>>
About cretification please read that link.
Frequently Asked Questions (FAQ) regarding SAP Certification & Career Opportunities
Message was edited by: kishan P

Application Infrastructure Management Survey

We would like to know your opinions by getting your answers to this survey.
Thank you in advance for your survey participation and feedback.
thanks,
Madhu Konety
Go to: http://www.zoomerang.com/survey.zgi?ATKCTR8JG87H7LG5MHW7YXD5
Please click this link now (or go online and retype the address into your
Web
browser). If you do not want to take this or other surveys, please click
"reply" and
ask the survey creator to remove you from the email list.

Hi,
Please download ConfigMgr 2012 toolkit and use the Deployment Monitoring Tool to see the status for a given application on a client.
System Center 2012 R2 Configuration Manager Toolkit
http://www.microsoft.com/en-us/download/details.aspx?id=36213
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot find Web Services Configuration under Infrastructure Management

Hi YiNing,
You need to go to SOA Management-> Business Administration-> Web Service Administration.
Best Regards
Pankaj

I think you want to Search for the Proxy Definition DestinationSI and manually create a new logical port for that destination. For that you need to go through the way i have given above and then you can proceed.
regards
Pankaj

Prime Infrastructure Demo License

If I apply the Demo license to a licensed Prime Infrastructure server will it enable all the features so I can test the Netflow features for the demo period? I have never used the Netflow features and would like to test drive for a little and decide if we want to move of our current platform.
Thank you all.

You purchase licenses to access the Prime Infrastructure features required to manage your network. Each license also controls the number of devices you can manage using those features.
You need a base license and the corresponding feature licenses (such as Assurance or Data Center licenses) to get full access to the respective Prime Infrastructure features to manage a set number of devices.
If you have installed Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices. You can send a request to [email protected] if:
You need to extend the evaluation period
You need to increase the device count
You already have a particular feature license and need to evaluate the other feature licenses
To troubleshoot licenses, you will need to get details about the licenses that are installed on your system. Click Help > About Prime Infrastructure to access your license information.When troubleshooting licenses, it is important to remember that Prime Infrastructure has five types of licenses:
Base: Required for every Prime Infrastructure installation. The requirement stems primarily from the need to do accurate royalty accounting by knowing how many Prime Infrastructure instances have been purchased. A Base license is required for each instance of Prime Infrastructure, and is a prerequisite for all other license types.
Lifecycle: Regulates the total number of devices under Prime Infrastructure management.
Assurance: Regulates the total number of NetFlow devices under Prime Infrastructure management.
Collector: Regulates the total number of NetFlow data flows per second that Prime Infrastructure can process.
Data Center: Regulates the total number of data-center devices under Prime Infrastructure management.This license type was introduced in Prime Infrastructure version 2.2.
All five types of licenses are supplied as either evaluation or permanent licenses:
Evaluation: These licenses permit or extend access to Prime Infrastructure for a pre-set period. You can apply only one evaluation license of each type (that is, only one Lifecycle evaluation license, one Assurance evaluation license, and so on). You cannot apply an evaluation license over a permanent form of the same license.
Permanent License: These permit access to Prime Infrastructure features as specified and are not time-limited. Permanent licenses can be applied over evaluation licenses, and can also be applied incrementally (that is, you can have multiple permanent Assurance licenses, and so on).
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/administrator/guide/PIAdminBook/licensing.html#pgfId-1055426

ISE integration with Prime Infrastructure,

Hi Team,
I would like to know what are the advantages and Disadvantages of the ISE integration with Prime Infrastructre.Also how the LAN, wifi, and identity management part (guest access etc) will work together.
Cheers!!!
Minakshi

Prime Infrastructure manages the wired and the wireless clients in the network. When Cisco ISE is used as a RADIUS server to authenticate clients, Prime Infrastructure collects additional information about these clients from Cisco ISE and provides all client relevant information to Prime Infrastructure to be visible in a single console.
When posture profiling is enforced in the network, Prime Infrastructure talks to Cisco ISE to get the posture data for the clients and displays it along with other client attributes. When Cisco ISE is used to profile the clients or an endpoint in the network, Prime Infrastructure collects the profiled data to determine what type of client it is, whether it is an iPhone, iPad, an Android device, or any other device.
Cisco ISE is assisting Prime Infrastructure to monitor and troubleshoot client information, and displays all the relevant information for a client in a single console.

Cisco Prime network and cisco prime infrastructure

Hi,
What is the difference between Cisco Prime Network and Cisco Prime infrastructure.
Please advice.

I assume you are asking about Cisco Prime LAN Management System (LMS) vs. Cisco Prime Infrastructure (PI).
LMS is currently the leading Cisco offering for wired infrastructure management. It is the evolution of the earlier CiscoWorks LMS, CiscoWorks RWAN CiscoWorks 2000, CWSI, VLAN Director, original CiscoWorks classic etc. products going back almost 20 years.
PI is the equivalent Cisco offering for wireless LANs and is the successor to NCS and WCS products.
The overlap and confusion comes from the fact the Cisco is positioning PI as the overall wireless and wired management platform and gradually introducing wired network management features to make it equal (and eventually exceed) LMS's capabilities.
There is a comparison table here that shows the current differences. A major new release of PI (2.0) is due out shortly which will close many (but not all) of the gaps on that table.

Installing Prime Infrastructure

Hi All,
I have a question about the installation of prime infrastructure.
We have ordered prime infrastructure 1.1, after ordering we received 3 PAK codes. The goal is to install the LMS 4.2.
- L-PILMS42-100 Prime Infrastructure LMS 4.2 - 100 Device Base Lic
- L-PINCS11-100 Prime Infrastructure NCS 1.1 - 100 Device Base Lic
- L-PINCSW11-100 Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic
If I'm not mistaken, we can install all 3 applications, but not on the same machine? Is that correct? And how do you choose to install LMS or NCS?
When deploying the OVA file? Where can you choose to use LMS or NCS?
Or is it the same OVA file for each application and does it unlock features depending on which license file you enter in the web interface?
Thanks,
Best Regards,
Joris

Prime Infrastructure NCS 1.1 dropped the NCS name when they moved to version 1.2 (and now at 1.3). That's the second item in your original post. The 1.1 license will still be good when you upgrade to 1.3. In fact, if it's a brand new installation, you might as well start with 1.3. You can download the image from www.cisco.com/go/nmsevals and apply your 1.1 license.
Prime LMS as noted above uses its own separate license and runs on its own separate server / VM.
There's no proper product name "Prime Infrastructure LMS" though some docs may mistakenly call it that. "Cisco Prime" is the new sweeping name for a set of complimentary products developed around a loosely common architecture and look and feel. It includes Prime Infrastructure (PI), Prime LMS, Prime Security Manager (PRSM), etc.
Prime Infrastructure NCS WAN 1.1 was a one timeproduct release designed for custoemrs with some specific needs for wired infrastructure management and without having LMS. It wil not be developed further and if you have LMS there's no need to install and operate the PI NCS WAN product.

File server resource manager. Block file types based on size

I have a site where our users appear to be saving some pretty huge TV quality video files (usually .MOV, and usually over 900MB in size) to our file storage server. The
concern I have is that such large files are going to fill up our server we will run out of space .
I don't want to blanket block smaller (less than 30MB) .MOV video files from being saved
to the drive, so would like to know if there's any feature in the File server resource manager that can block file type based on size.
If it's not possible, then could someone please suggest this as a future feature of FSRM as I'm sure there are plenty of companies out there who face the same problem as me.
thanks,
Mike Geileskey
Infrastructure manager, PIAS UK Limited

Hi,
We could not block file types based on size by using FSRM. As a workaround you could use disk quotas on NTFS Volumes which are tracked on a per-user.
To apply disk quotas to existing volume users, add new quota entries in the Quota Entries window. Please understand that it will take you some time to add all users into the list.
It will allow administrators to control the amount of data that each user can store on an NTFS file system volume.
For more detailed information about disk quotas on NTFS Volumes, you could refer to the article below:
File Systems
http://technet.microsoft.com/en-us/library/cc938945.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

Hello together,
System: Solution Manager 7.1 Sp7
since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
Name....................Errors raised during Event Calculation
Start Time..............20.03.2014 15:12:27 CET
End Time................20.03.2014 15:12:27 CET
Managed Object..........Monitoring and Alerting Infrastructure
Managed Object Type.....Technical Component
Rating..................Red
Category................Exceptions
Status..................Open
Opening the alert shows this:
E2E Alert Analysis Report:
This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
Analyze the error messages in the Application Log, as follows:
Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
When opening trx SLG1 I can see this error:
Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
80E0ED08ADA71DEEBFD84650DEF6421F not found.
How can I fix this?
Thank you very much.
Regards,
Ralph

Hi Ralph,
We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
Can you please tell me the procedure to resolve this issue?
Thanks.
Regards,
Deepika R

Cisco Prime Infrastructure 2.0 release date

What is the release date for Cisco Prime Infrastructure ? What are the improvement from 1.2 to 2.0 ?
thanks
Morgan

It's currently due out 31 August 2013.
I haven't seen the final release notes but it will incorporate a lot of the features currently in LMS 4.2 for wired infrastructure management that are currently missing in PI 1.x.
I have heard it will not include Topology or template compliance reports and jobs at 2.0 - those features did not make the development cutoff date for 2.0 but they are projected for 2.1.

How to push System-Data to the SLD ? NWA 7.11

How can i push the data from a J2EE-system to the SLD that is connected/configured in the NWA (Destinations) ?
In older versions of NWA there's being a 'collect and send'-button...
best regards
Christoph
Edited by: Christoph Bastian on Aug 17, 2011 3:46 PM

Hi,
Perhaps this link could help:
http://help.sap.com/saphelp_nwce711/helpdata/en/48/b6847d96655295e10000000a42189b/frameset.htm
The SLD_DataSupplier and SLD_Client destinations should be set in NWA -> Configuration Management -> Security Management -> Destinations
Next under Configuration Management -> Infrastructure Management -> SLD Data Supplier Configuration. Collect and Send exists to send the data to SLD.
Regards,
Srikishan

I want to find any backup and recovery solution for SharePoint server 2013 enterprise

Dear Expertise,
Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how?
KF

Hi,
According to your post, my understanding is that you wanted to know some backup and restore solution for SharePoint 2013.
There are two Technet articles about the backup and restore, you can have a look at them.
http://technet.microsoft.com/en-us/library/ee428315(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ee662536(v=office.15).aspx
You can also use some third-part software tools to achieve the same scenario.
http://www.avepoint.com/products/sharepoint-infrastructure-management/data-protection/
http://www.sharepointreviews.com/sharepoint-reviews-articles/sharepoint-administration/254-sharepoint-backup-recovery-evaluation
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to find out the serial number of a connected AP

Hi.
We are using Cisco Prime Infrastructure Manager 2.0
My question is: Is there a possibility to find out the serial number of a connected AP?
Regards
Markus

Hi Markus,
I don't think ,there is any report which can help to get the serial no of AP.
Inventory( Report >Report Launch Pad> Inventory) is the ONLY report which gave the below information but NOT the serial no .
Inventory
This report allows you to generate inventory-related information for controllers, access points, and MSEs managed by Prime Infrastructure. This information includes hardware type and distribution, software distribution, CDP information, and other statistics.
*** If anyone knows more deatils on this ,please share with us ***
Thanks-
Afroz
[Do rate the useful post]

Infrastructure management

Similar Messages

Maybe you are looking for