INIT load to the 0FIAR_C03

Hi
I am uploading data to the cube 0FIAR_C03, I am using the standard infosource, I have uploaded data using INIT load it replies that INIT update is not possible to the cube 0FIAR_C03 but the full load is possible.
What can I do to make it delta and INIT enabled ?

Hi Sun,
your datasource have to be replaced (from BW PlugIn 2001.1) by the new extractor 0FI_AP_4, that allows delta management !
Look at OSS Note 401646 'New DataSources for Line Items from FI-GL, FI-AP..."
Hope it helps!
Bye,
Roberto

Similar Messages

Tab-highlighting duirng the inital Load of the application

Hi All,
Currently I m developing a Flex application where in the
home page,set of seven tabs are there as per the design.
Whenever i click the tab, I have changed the style of the
text to bold..to make it look like highlited.But this works fine
except the inital load of the first page..In the main appliation
tag,i have used the initialize and also the creationComplete events
to make that tab--higlited.Can anyone suggest me a solution to
solve this issue?
I tried using the following code..to highlite..but not
working for the first time..initial display
myTabBar.selectedIndex=4;
myViewStack.selectedIndex=3;

Look at the following thread: [http://www.webmasterworld.com/javascript/3396582.htm] It will involve modifications to your mod pl/sql install..
Thank you,
Tony Miller
Webster, TX

Lis datasources , INIT loads,

Hi,
i am working on BI7, and v are using some lis datasources like 2lis_02_s013 and
2lis_02_s017 , I want to do init load with data transfer option and after that create delta loads to be used in process chains, i am geeting errors saying that datasources is till updating in sources system for init load
please guide me in this regard,
plz send ur answers to [email protected]
or
[email protected]
correct answers will be awarded points

Hi,
You can use the infopackage to create the init load on the datasource and transfer the data to PSA and from there you can transfer the data into data targets using DTPs either you can go with full update or you can load the deltas from here again.
Creating init loads, and then deltas is all done in the datasource tree where you create the infopackage to extract the data from the source system to BW system.
REgards.

How to see the init load in bi 7.0

hello frnds,
In bi 7.0 when v load data it show the full load and delta load option only,,so my question is, if delta load r there then definately init load also avilable,so where is that init load,,plz guys tell me where is that option,,
2nd question is about compression in bi 3.5,,after loading data into infocube when i do compression it ll not work,,why i dont know ,,plz help me
Thanks
Rosy

Hi Rosy,
Init with data load is Full upload + Delta Enables. Once you run this it will fetch entire records from the Source, delta will be automatically enabled and next time onwards only delta will be coming to BW.
Before you can request a delta update, you must first initialize the delta process.Delta initialization can only be simulated for DataSources from SAP source systems if the DataSource supports this.
I hope the below link will be helpful,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0db2280-8242-2e10-b6a5-86a46d0feb25?QuickLink=index&overridelayout=true
Regarding compression, please check the below link,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035d300-b477-2d10-0c92-f858f7f1b575?QuickLink=index&overridelayout=true
Thanks,
Vinod

Whats the Actual use of the Setup table apart from the Full/Init loads

Hi guru's
could u explain whats the Actual use of the Setup table apart from the Full/Init loads in Lo Extraction

Hello Guru,
The Setup table is used mainly for storing the Historical data whereas the new and changed records will be maintained in the Update table.
By storing the Historical data in the setup table you don't need to disturb the Application table anymore.
Please go through the following blogs
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Hope it helps
Thanks,
Chandran

UnsatisfiedLinkError upon System.load() of library even though the load is in the init() function of the servlet.

All,
Any help on this would be appreciated. We have a servlet that calls a native method
and we load the native library in the servlet's 'init()' method so the servlet
gets loaded only once. However, periodically, I get the following error:
java.lang.UnsatisfiedLinkError : Native Library /opt/shared2/weblogic/myserver/servletclasses/twtc/servlet/toc/toclib.so
already loaded in another classloader
It seems to bring down weblogic when this happens.
Why does this happen?
Is there a way around this?
As a test, I called System.load() 10 times outside of the init function with the
same library and it did not fail once but it does periodically in the init() function
of my servlet, which implies that the init function is being called more than
once.

Like what the error message says, you can only load a native library once per ClassLoader per VM.
You can test this by constructing two ClassLoaders and loading the same library.
The reason why a servlet will be constructed by different classloaders with a VM session is if:
1) the servlet is reloaded (hot-deployed)
2) the servlet belongs in more than one ear, since each ear has its own classloader.
Gene
"Michael" <[email protected]> wrote in message news:[email protected]..
>
All,
Any help on this would be appreciated. We have a servlet that calls a native method
and we load the native library in the servlet's 'init()' method so the servlet
gets loaded only once. However, periodically, I get the following error:
java.lang.UnsatisfiedLinkError : Native Library/opt/shared2/weblogic/myserver/servletclasses/twtc/servlet/toc/toclib.so
already loaded in another classloader
It seems to bring down weblogic when this happens.
Why does this happen?
Is there a way around this?
As a test, I called System.load() 10 times outside of the init function with the
same library and it did not fail once but it does periodically in the init() function
of my servlet, which implies that the init function is being called more than
once.

Data is not getting loaded using the Demon for RDA

Hi friends,
We are doing a POC for Real Time Data acuisition.
For this we have copied an exisiting datasource and made it Real Time enabled.
Replicated the datasource now we can see the new datasource in BW.
We have created an Init Info Package (This loads only till the PSA).
Loaded the data using Full DTP to load from PSA to the DSO, this succesfully loaded the data in the DSO.
After that we Created a Delta Info package and a Delta DTP and assigned them to a Demon and started the demon. But strangely i can see the delta data getting Loaded to the PSA but there is nothing happening on the DTP. When i check the DSO manage there is no Delta request. The only request what we have is the Full load.
Is there any step or something im missing? please guide me.
Regards
BN

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

Error while init load of ODS

HI Gurus,
I deleted entire ODS data.And now want to do reinit load.But i am getting below error.
From where I can see and delete delta queue.How to do that resetting status and all..
Error for init package :
Deltas have already been loaded for the init. selection of request REQU_4EBWUXD8QKYLD7YV635G17CCR. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.
Please help.
Thanks,
Prasanna N.
Edited by: prasanna nadgouda on Jul 1, 2009 8:44 PM
Edited by: prasanna nadgouda on Jul 1, 2009 8:58 PM

HI,
While deleting that init request I get an warning..
If the delta process of your DataSource stipulates serialization, you can no longer post this init request or any subsequently requested delta requests to the DataStore objects that were filled previously, after you have deleted the initialization and reinitialized. This is because old inits and deltas still exist.
The DataStore object recognizes that new inits and deltas have been created that are not yet posted in the DataStore object and requires them to be updated. Otherwise the selections of the new inits overlap with the selections of the old inits that are still in the DataStore object, so that they cannot be posted.
Does this is somthing critical..How should I go ahead..?

FI_AR_4 Infosource(standard) Init Load

Hi Gurus,
I have an issue regarding INIT load for FI_AR_4 Infosource.It shows yellow status though R/3 has data.I got the records into BW using full upload.
To enable DELTA upload, I Intialised the DELTA "<b>without data transfer</b>".It gives me an error that I cannot Initialise once again after FULL upload.
Could you please help me to solve this.
Regards,
Venkat

That is true with the GL if you are using the GL. Once the GL is initialized, AR and AP have to follow that, if GL is not being used, don't worry about it.
Check you ODS status (change -> ODS...). Look at the settings and make sure the "update status automatically" is set, otherwise the system waits for you to turn it green manually.
/smw

Question on Delta Init Loads

Hi All,
I have a basic question on Delta Inits. I am a beginner in BW and would truly appreciate any input.
At my company, we currently are doing delta loads on the cube 0RT_C35 (Material Movements). They did the Delta Inits prior to that.
Now if we were to add new fields to the cube and need to populate data to the new fields from the beggining, how do I go about doing it..?
Should I delete the Delta Init requests and redo the Delta Inits..? What will happen to the Delta loads that are running daily then..?
Can someone please give me the steps that I need to follow in a sequence.
Like I said, it might be a basic question..but I am not familiar with this process.
Appreciate your help.

Thank You very much Ravi.
I will not be doing it today based on the priority of the tasks..but this is something I will have to do eventually in the next 1-2 weeks. I will definitely let you know how it goes.
So once the mapping and everything is in place and is ready to be loaded, bascially I need to delete data from the datatarget, put the delta job on hold, reinit the delta requests and then I should be able to do the delta jobs again right..?
Thank You so much.
The other issue is that there are probably 25 Delta inits that they did based on the number range for the Material Nbr. But they have only 1 delta. So does the delta job cover the data for all the Delta Init requests..?
I am assigning full points to you for being such a great help. I will let you know when I actually end up doing this.
I will assign the remaining points when I close the request.
Thanks again

FIGL Init Load Failed

Hi BW Gurus,
I tried to load the FIGL line item extractor - FI_GL_14 and it failed after 2 days.
Due to memory and also system resiurces.
I plan to do the following.
1.Create a infopackage for each fiscal period and do a full load.
2.After all the loads do a init without data transfer.
3.Then schedule the delta.
Will this work.
Also please advise whether I can schedule all the full loads for the fiscal periods in parallel.
Also in ECC the users will be posting to figl during the extract. I don't think this will have any impact on the extract. Is it correct.
Please let me know if the above solution will work.
Thanks
Senthil

Hi Senthil,
Please do not do full loads and init w/o data transfer afterwards. You got two options,
1) Perform init w/o data transfer first and then do full loads.Due to this whatever is changed after init w/o data transfer will be captured as delta so that you won't loose any data. If you perform full first,you will loose delta till the time you perform Init.
(Assuming everything is on Overwrite mode on first level DSO which is generally the case for 0FI_GL)
OR
2) Perform Init with fiscal period ranges. You can do any number of Init's with period ranges. Further deltas will automatically take correct fiscal period ranges.
Answer to your one more Q, offcource you can load full for fiscal periods in parallel there is no problem with that.
If you follow one of above two methods you won't even miss a single record.
Let me know if you have any doubts. Please give marks accrodingly.
Regards,
Viren
Edited by: Viren Devi on Mar 15, 2009 12:16 AM

Init Load showing in yellow state.

Hi all,
I am trying to do init for SRM data source to ODS object.
The init load is showing yellow state (0-0 records).
There is no data available in SRM related to this data source.
Can anyone please tell me why it is in yellow state instead of green.
Thanks
S VR.

Hi S VR,
In the monitor screen go to the Status Tab > click on the lights next to Total > Make it Red and save > the system will prompt a couple of messages, say Yes to them. Then you can Manual Update. Once all packages are done (green), then again Status tab > click onthe lights next to Total > Delete Statsu; back to request status > Save. The request should now be green.
else
try repair full request option it can help you..
Hope this helps...
Assign points if helpful...
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 14, 2008 6:14 AM

How I load all the data in a database table into a cache?

Hi
Lets assume I have a lookup table I want to load it upfront into the cache so that the application can use this data from cache. One way is to write code to create a map from the database and call putALL. Is there any better approach to this?
Another thing is if the data is more than 1 GB and if I construct a map of one GB before putting it into the cache the JVM might crash. The question is how do I distribute upront loading of the cache to multiple JVMs. Do I have to use invocation service or is there any thing out of box.

I only use one JVMs and I use a distributed cache, the configuration XML file like this:
<p> <distributed-scheme>
<scheme-name>default-distributed</scheme-name>
<service-name>DistributedCachestore</service-name>
<backing-map-scheme>
<read-write-backing-map-scheme>
<scheme-ref>example-read-write</scheme-ref>
</read-write-backing-map-scheme>
</backing-map-scheme>
<listener-scheme> </listener-scheme>
<autostart>true</autostart>
</distributed-scheme>
<read-write-backing-map-scheme>
<scheme-name>example-read-write</scheme-name>
<internal-cache-scheme>
<local-scheme>
<scheme-ref>default-eviction</scheme-ref>
<high-units>50050</high-units>
<low-units>40000</low-units>
<expiry-delay>3600</expiry-delay>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<scheme-ref>example-cachestore</scheme-ref>
</class-scheme>
</cachestore-scheme>
<read-only>false</read-only>
<write-delay-seconds>0</write-delay-seconds>
</read-write-backing-map-scheme>

<class-scheme>
<scheme-name>example-cachestore</scheme-name>
<class-name>com.tangosol.examples.coherence.DBCrudStore</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>cachec</param-value>
</init-param>
</init-params>
</class-scheme></p>
The data in my table will reach about 1000000+ and I want to load about 50000 into cache.
Thanks.

No selection in infopackage possible when Init-load

Hello all,
I have created a loading proccess from an ODS to an Infocube via delta-load. I want to restrict the data and therefore I want to use the selction tab from the infopackage menu. But this is just possible when I choose full-load. When I choose Init-load or delta-load, there is no restriction possible in the selection screen.
Ho can I restict data when i load via delta? the release is 3.5.
Any help would be great.
Best Regards,
Stefan from Munich/Germany

Dear Stefan,
You can not restrict an init/ delta load from an DSO, because the data loaded will correspond to the change log table of the DSO.
What you can do is a "fake" delta. You put a "changed date" in you DSO (filled by the sy-datum in the update rule) and then do a full load from your DSO to your cube with the selection you want and changed data = today. But you will have to be careful in case of reload...
Hope it helps,
Rodolphe

Error loading WSDL The WSDL document could not be parsed.

Error Loading WSDL
The WSDL document could not be parsed.
The following error occured while parsing the WSDL location -
Failed to model operation: {http://xmlns.oracle.com/DataloadSOA/SubmitSvc/SubmitSvc}SubmitPayload(,) Reason: Could not find element definition for {http://www.cdisc.org/ns/odm/v1.3}Study Detail:
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Failed to model operation: {http://xmlns.oracle.com/DataloadSOA/SubmitSvc/SubmitSvc}SubmitPayload(,) Reason: Could not find element definition for {http://www.cdisc.org/ns/odm/v1.3}Study Detail: at oracle.sysman.emSDK.webservices.wsdlparser.ParsedWSDLFactoryImpl.getParsedWSDL(ParsedWSDLFactoryImpl.java:157) at oracle.sysman.emSDK.webservices.wsdlparser.ParsedWSDLFactoryImpl.getParsedWSDL(ParsedWSDLFactoryImpl.java:87) at oracle.sysman.emas.model.wsmgt.WSTestModel.init(WSTestModel.java:325) at oracle.sysman.emas.view.wsmgt.WSView.parseWSDL(WSView.java:169) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:601) at com.sun.el.parser.AstValue.invoke(AstValue.java:187) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297) at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:889) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:379) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) Caused by: oracle.webservices.mdds.MddsException: Failed to model operation: {http://xmlns.oracle.com/DataloadSOA/SubmitSvc/SubmitSvc}SubmitPayload(,) Reason: Could not find element definition for {http://www.cdisc.org/ns/odm/v1.3}Study Detail: at oracle.sysman.emSDK.webservices.wsdlparser.ParsedWSDLFactoryImpl$LocalMddsErrorHandler.failedToModelOperation(ParsedWSDLFactoryImpl.java:186) at oracle.j2ee.ws.mdds.ModuleBuilder.annotateOperation(ModuleBuilder.java:419) at oracle.j2ee.ws.mdds.ModuleBuilder.annotatePort(ModuleBuilder.java:366) at oracle.j2ee.ws.mdds.ModuleBuilder.annotateService(ModuleBuilder.java:139) at oracle.j2ee.ws.mdds.ModuleBuilder.doAnnotateModel(ModuleBuilder.java:101) at oracle.j2ee.ws.mdds.ModuleBuilder.annotateModel(ModuleBuilder.java:81) at oracle.j2ee.ws.mdds.MddsModelFactoryImpl.createModelFromWSDL(MddsModelFactoryImpl.java:92) at oracle.j2ee.ws.mdds.MddsModelFactoryImpl.createModelFromWSDL(MddsModelFactoryImpl.java:78) at oracle.sysman.emSDK.webservices.wsdlparser.ParsedWSDLFactoryImpl.getParsedWSDL(ParsedWSDLFactoryImpl.java:152) ... 80 more
View Log MessagesSaveClose

Hi,
Are you able to view the wsdl in a browser?
It seems the wsdl is not deployed properly on the server.

INIT load to the 0FIAR_C03

Similar Messages

Maybe you are looking for