Initial Positioning of RowIterators
I have a fairly large hierarchy of Master/detail view Objects like:
ViewObject1
->ViewObject2
--->ViewObject3
----->etc...
My swing/Jclient app starts with a search to find the correct row for ViewObject1 and that row gets set to the current Row. Now when I go to view the other view objects their iterators are still positioned before the first row, (they show no data).
Is the only/best wayt o get them to automatically be on the first row to go through and set all the detail view objects to their first row, when I set the current row of
ViewObject1? Doing this works, but it seems as if there should be an easier or more maintainable way to accomplish this
Jeff
For performance reasons, if you've not 'executed a detail' it's not actively synced up with the master.
You may want to execute the detail row (or set it to first) the first time by checking if the detail's current row slot is not RowIterator.SLOT_VALID
Similar Messages
-
Return to initial position when dragging scroll bar
There is a function in Windows that when using mouse cursor to drag the scroll bar, moving the cursor away from the scroll bar makes the bar go back to its initial position. Does OS X have a similar function? It is useful when looking figures during reading a large document.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback -
DAQmx Quadrature Encoder Initial Position
Hello,
I am building an application that requires trackig the raw counts from a quadrature encoder connected to a NI USB-6212. In order to count each rising and falling edge of both channel A and channel B, I have configured a DAQmx Linear Encoder Channel for 4X decoding with the units set to ticks. In order to prevent the counter from rolling over when the ticks become negative, I convert the U32 value from DAQmx Read to I32. So far this all works as expected. I would additionaly leik to retain to position of the encoder if the VI is stopped but remains in memory. For this reason I wire the value of the raw counts to a shift register which is read into the initial position input of the DAQmx Create Channel VI. For some reason, the DAQmx Create Channel VI quadruples whatever value is wired to the inital position input. I solve this by deviding the previous counts by 4 before writing to initial position. However, the problem occours that if the value of the previous count was not an even multiple of 4, the inital position must be rounded to the nearest integer, causing the count to jump when restarting the VI. How can I reset the inital postition to the exact value of the encoder at the end of the previous iteration?Yes, It does. In 1X decoding mode, the starting count equal to the supplied initial position, but then I only count 1/4 of the pulses I expect to see. Perhaps I am misunderstanding the meaning of 'inital position'?
-
I have bought a game apps "I Play 3D Bowling" that I can't play the game when I press the icon which will return to initial position . I try many times to delete & install again & again but unsucessful.
Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions? -
How do I prevent the playhead from returning to it's original position after pausing or stopping with the spacebar or k button? With either the skimmer on or off, whenever I pause or stop the **** playhead will always return to the position it was last at. I don't understand why neither of the shortcuts would just stop the playhead at the point that is being played at. This may seem like an extremely edgy way to go about editing, but I might actually wish to pause the playhead at any given moment and position my playhead nearby said moment before creating an edit point (without having to add a marker and return to it with the blade tool, or take note of the specific duration and use the duration control to go to that specific point or any other unnecessary steps when doing a rough cut). I simply would like the playhead to pause/stop at the moment I press either keyboard shortcut. After the many attempts at trying to make FCP X work for me and the many "workarounds" by FCPX enthusiasts, it's disheartening to know that most other editors in my circle who make a living doing paid commercial work are wondering why I've decided to take a break from using CS6 (and it's integration with the industry-standard AE) to give FCP X a shot, all to make very simple tasks like the one aforementioned a mystery... any help in this matter would be greatly appreciated.
Thank you for your response Luis and for your previous help (regarding multiple selections being added to the timeline in reverse order when working in list view in the event browser).
Yes i've trashed my preferences, but I should be more specific as to what I am actually doing. Because I am working from my macbook pro and do not have a "home button" which was the original shortcut to "play from/go to beginning" and because I did not like the replacement shortcut in FCP X to play from beginning (without a home button it was something like Function + Shift something else on a laptop) I became used to Adobe Premiere CS6 and made the return key my "play from beginning" shortcut. It was available and did not have a use by itself (only to confirm changes/choices), did not effect it's use in conjunction with other shorctus so I choose enter as my "play from/go to beginning"...
So when I play from the beginning and attempt to pause or stop the playhead, regardless of how I choose to do it (spacebar or k) it does not stop at that specific instance and always returns to where it previously was. This seems very confusing and inconvenient, I would hope at least one of these shortcuts would actually stop the playhead where it was at that moment where I press stop or pause. It's extremely frustrating knowing that I cannot pause the playhead where it's playing if I choose my "play from beginning" shortcut.
Also since you seem to be a guru and an expert, i'd like to know if you cut with FCPX on a laptop and what shortcut you use whenever you'd like the playhead to go to the beginning of the timeline, end, etc since there are no "home" or "end" buttons on a laptop....
Thanks a million, talk soon...
Anthony -
Hi there,
I'm having a little trouble when I start the Preview app: every time I start, it is split across my two screen.
I have one display above the other (both in reality and in the 'display settings' setup). Preview ends up displayed with the top half on the upper screen and the bottom have on the lower screen. It always reverts to this arrangement.
I'm not sure if this is a Preview related bug, or if this is a 'window behavior' issue -- is there some way to generally set the starting position of windows for an application? Should Preview be 'remembering' the last position after it closes?
Any thoughts?
Thanks!
TorYep, it's been doing that forever. For me, with side-by-side monitors it used to open with small things sticking over the edge to the left, large items opened fine, right where they were supposed to. As you open more things the opening position progresses slowly downwards and to the right, so it would tend to be only the first thing I open, if it is smallish. Haven't noticed it as much in Leopard as I did in Tiger, but maybe I just haven't been opening any small things.... I don't think there is a thing that can be done about it, unfortunately.
Francine
Francine
Schwieder -
Copy paiste objects into the exact position!
helllo forumers.
i have 2 questions about the copy paiste command.
1st) question is i have multiple objects on one layer circles rectagnles and so on,im trying to copy paiste one of those objects onto a new layer.but it wont
be paisted on the exact same position,rather its moving into the middle of the art board,is there a way to copy paiste an object onto another layer and retaining its initial position on the art board?
2nd question is there also a way to copy paiste from illustrator into photoshop and also the object to fall into place where it sohuld be located,initial posiiton
thats on the illustrator art board to be paisted onto the photoshop art board.cos again i have the same problem the object gets paisted onto the middle of the
photoshop artboard and then i have to do the nudging myself.
thank you.hello steve.
1st question solved pretty quick i may say.
the 2nd question is a lttle bit confusing,is there a link i can see of this demonstration?
thank you. -
How to move a layer to a X/Y position with VB/DOM ??
Hello,
I try to move a layer on a picture to a position X/Y. Up to now, I'm only able to move for a relative mouvement from initial position, but I would like a move with the corner of the picture as reference.
The need : To place on the doc1 (big doc) a small picture (doc2). I use copy/paste to have the small picture as a new layer on the big picture
I use VBA-excel to open Photoshop and run the differents step.
What I suceed to do :
PS = CreateObject("Photoshop.Application") ' Launch PS : OK
'Open the 2 doc (doc1 : big picture, doc2 : small picture) : OK
'go on the small picture and select/copy the picture : OK
PS.activedocument = PS.documents(2)
PS.Documents(2).selection.selectall
PS.Documents(2).selection.copy
'go on the big picture and paste as a new layer : OK
PS.activedocument = PS.documents(1)
ps.documents(1).paste
'find the information about the new layer : HERE IS THE PROBLEM
'move the layer in the correct position after compute the need move : OK
ps.document(1).translate 20,20
I found this information for another script language
>var currentBounds = targetDoc.activeLayer.bounds;// get the bounds of the layer - which is the activeLayer of the targetDoc
>var offsetX = new UnitValue( newX-currentBounds[0].as('px'), 'px');// the required offset needed for move
So I think it's possible to get the bound of the mayer, but I don't know how to write it in VB
The other solution is to find a "translate" method which use the destination point x/y without using initial position (absolute coordinate), but i don't find this kind of method.
Thank's for any helpHi again,
Thanks for the reply...
Mads wrote in news:506500000005000000A6110100-1042324653000
@exchange.ni.com:
> It a "Current VI's path constant", you can find it on the file palette
> under constants. It'n not really constant as it will always give the
> path of the VI it's in...a useful reference.
Oh, it's not what I'm looking for then I've got a complex script parser
which is fully multitasking and re-entrant so I can run multiple scripts in
parallel. (The scripting languauge is just a high level access to some
functions of my program so that non-LVers can still have a degree of
programmability)
Currently every time I call my re-entrant SubVI I have to pass it its own
VI Reference from the Open VI Refere
nce with "prepare for re-entrant" bit
set.
Is there an equivalent constant anywhere "Current VI's VI Reference"? Of
course I can't reference by path, as I can have 20 of the same VI running,
all with their own Reference and execution space. It gets very messy when
my VI calls itself, or I have to pass the reference to other places.
Thanks again,
Andrew -
Using LabView, I am trying to read a very large file which may be on the order of 2^32 bytes. I need to be able to step into the file at a byte position which may be greater than the I32 limit set by the read file.vi. Are there any options to the read file.vi or a method of circumventing this limitation?
I'm not sure but i think that you can manage the "pos mode" in the "seek" sub-vi.
The "pos mode" let you choose the initial position to add the numbers of bytes you want to move.
I think that you can add a i32 number from the "initial" in the "pos mode" an latter use the "pos mode" in "current" to add another value. Then the next time you can move more than 2^31 bytes to the initial position.
I hope you understand my idea, i wasn't try it before, but i think that would work. -
Initializing the iterator in a loop - pointing to the first value
I have two iterators defined as given below. And I am trying to find if they have the same words remove it. It is working fine with the first set of words from the next. When I complete my fist loop and start the second one, I need to initialize the first one to the "0" position. When it finishes with the stop words list and takes the next word from the text, it just starts from the next word in the stop word list. How do I do that ? since Iteratort does not have any further methods than hasNext, next and remove ? what can be done here to point the iterator to the frist position. (As mentioned in the code with the comments).
Thanks in advance. Please advise.
Iterator itrText1 = alText.iterator();
Iterator itrWords1 = alOfStopWords.iterator();
while (itrText1.hasNext())
Object text = itrText1.next();
System.out.println("Entering first while \t" + text);
//Need to make the iterator go to the initial position
while (itrWords1.hasNext())
Object sWords = itrWords1.next();
System.out.println("Entering inner while \t"+ "Comparing words are " +
sWords + "\t" + text);
if (text.equals(sWords))
System.out.println("Entering if");
itrText1.remove();
System.out.println("Removed" + text);
break;
}// first if
System.out.println("Exiting if");
}// inner while
System.out.println("Exiting inner while");
}//outer while
System.out.println("Exiting outerwhile");If I understand what you are asking, you need to move the initialization of the second interator inside the first loop, as follows:
Iterator itrText1 = alText.iterator();
while (itrText1.hasNext())
Object text = itrText1.next();
System.out.println("Entering first while \t" + text);
//Need to make the iterator go to the initial position
Iterator itrWords1 = alOfStopWords.iterator();
while (itrWords1.hasNext())
Object sWords = itrWords1.next();
System.out.println("Entering inner while \t"+ "Comparing words are " +
sWords + "\t" + text);
if (text.equals(sWords))
System.out.println("Entering if");
itrText1.remove();
System.out.println("Removed" + text);
break;
}// first if
System.out.println("Exiting if");
}// inner while
System.out.println("Exiting inner while");
}//outer while
System.out.println("Exiting outerwhile"); -
I have an applet which will display 25 columns and n Number of rows. How can I change the cursor postion to a particular row while applet reloads?
setRowSelectionInterval(int, int) may move the cursor to the particular row. But The scrollbar is still in initial position. I need to change the scroll position.Use getCellRect(...) to get the rectangles of any cells you want to display, then create a Rectangle which circumscribes all of these, then use scrollRectToVisible(...) to adjust the view.
-
Position of component POPUP + ADF
Guys,
I need to set the initial position of my popup, it is loaded at the time page is loaded as I can determine the starting position from him?
[]'s
RenanHello Frank,
Navigating the Internet I came to find your blog, I made use of hints and set align (before_end,before_start, after_end, after_start, start_before ...), the more you realize is that it sets the effect of animation.
What I need and adjust the X and Y popup on the screen he needs to be loaded on a particular point of the screen. -
Easy question - scroll bar position in listbox problem
hello again
this time my question is simple...
is there a way to set the initial position of a vertical scroll bar of a listbox?
sometimes - if i make more runnings - remain in memory the last position...and if the new listbox is smaller then the last one i see a white listbox and i think that something went wrong in my program
Using LabVIEW 7.1
Solved!
Go to Solution.Hi gigi85,
Okay in that case,Please create property node with Multiple lines property, and click on the blue square shown in the diagram and expand it downwards, Labview should automatically add these parameters. added screenshot for your reference.
Let me know if u've any queries.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Attachments:
Screenshot_TopRow_PropertyNode.png 8 KB -
Caret position in JFormattedTextField
How to I configure a JFormattedTextField so that the initial position for editing is on the right rather than the left?
I'm using the default, left, and most users of my application complain that it isn't intuitive.You need to do this
protected static class FormattedTextFieldFocusListener extends FocusAdapter {
/* (non-Javadoc)
* @see java.awt.event.FocusListener#focusGained(java.awt.event.FocusEvent)
public void focusGained( FocusEvent e ) {
/* After a formatted text field gains focus, it replaces its text with its
* current value, formatted appropriately of course. It does this _after_
* any focus listeners are notified. So, if we are editable, we queue
* up a selectAll to be done after the current events in the thread are done. */
final JTextField field = (JTextField) e.getSource();
if ( field.isEditable() ) {
Runnable doSelect = new Runnable() {
public void run() { field.selectAll(); }
SwingUtilities.invokeLater( doSelect );
} -
Initial postion of image changed but now image does not move
hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad......
i seem to have moved the initial position of the image by the following >
public void paint(Graphics g) {
g.drawImage(CurrentImage,xPos = 10,yPos = 100,this);but now the image does not move when i press the keys in its new position
does anyone one know how to solve this?? if you do please reply THANK you.
the original code is below >
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.*;
import javax.sound.midi.*;
import javax.swing.*;
import java.awt.Image.*;
public class Man3 extends Applet implements KeyListener {
int xPos, yPos;
Image man1;
Image man2;
Image man3;
Image man4;
Image man5;
Image man6;
Image CurrentImage;
Image offScreenBuffer;
AudioClip tune;
public void init() {
setBackground(Color.white);
xPos = this.getSize().width/2;
yPos = this.getSize().height/2;
man1 = getImage(getCodeBase(),"man1.gif"); // right hand up
man2 = getImage(getCodeBase(),"man2.gif"); // straight
man3 = getImage(getCodeBase(),"man3.gif"); // right hand down
man4 = getImage(getCodeBase(),"man4.gif"); // left hand up
man5 = getImage(getCodeBase(),"man5.gif"); // straight
man6 = getImage(getCodeBase(),"man6.gif"); // left hand down
CurrentImage = man2; // man facing right
addKeyListener(this);
requestFocus();
tune = getAudioClip(getCodeBase(), "Track.wav");
public void paint(Graphics g) {
g.drawImage(CurrentImage,xPos,yPos,this);
public void checkXmin()
if (xPos == 0) xPos = 500;
public void checkXmax()
if (xPos == 500) xPos = 0;
public void checkYmin()
if (yPos == 0) yPos = 350;
public void checkYmax()
if (yPos == 350) yPos = 0;
xPos+=1;
if (xPos>500) xPos=0;
if (xPos==0) tune.play();
// man walks right
public void checkCurrentImageRight()
if((CurrentImage == man6)||(CurrentImage == man5)||(CurrentImage == man4))
CurrentImage = man2;
if(CurrentImage == man3) CurrentImage = man1;
else if (CurrentImage == man1) CurrentImage = man3;
else if(CurrentImage == man2) CurrentImage = man1;
// man walks left
public void checkCurrentImageLeft()
if((CurrentImage == man3)||(CurrentImage == man2)||(CurrentImage == man1))
CurrentImage = man5;
if(CurrentImage == man6) CurrentImage = man4;
else if (CurrentImage == man4) CurrentImage = man6;
else if(CurrentImage == man5) CurrentImage = man4;
public void keyPressed(KeyEvent evt) {
int offset;
int x = evt.getKeyCode();
if (evt.isShiftDown()) {
offset = 20;
else {
offset = 10;
switch (x) {
case (KeyEvent.VK_UP): // man goes up
checkYmin();
//checkCurrentImage(2);
yPos -= offset;
break;
case (KeyEvent.VK_DOWN):
checkYmax();
//checkCurrentImage(2); // man goes down
yPos += offset;
break;
case (KeyEvent.VK_LEFT): // man walks left
checkXmin();
checkCurrentImageLeft();
xPos -= offset;
break;
case (KeyEvent.VK_RIGHT): // man walks right
checkXmax();
checkCurrentImageRight();
xPos += offset;
break;
repaint(); // display image
public void keyTyped(KeyEvent evt) {
public void keyReleased(KeyEvent evt) {
public void update(Graphics g)
// Will hold the graphics context from the offScreenBuffer.
// We need to make sure we keep our offscreen buffer the same size
// as the graphics context we're working with.
if ((offScreenBuffer==null) || (offScreenBuffer.getWidth(this) != getWidth()) || (offScreenBuffer.getHeight(this) != getHeight()))
xPos = getWidth()/2;
yPos = getHeight()/2;
offScreenBuffer = this.createImage(getWidth(), getHeight());
// We need to use our buffer Image as a Graphics object:
Graphics gr = offScreenBuffer.getGraphics();
gr.setColor(getBackground());
gr.fillRect(0, 0, getWidth(), getHeight());
paint(gr); // Passes our off-screen buffer to our paint method, which,
// unsuspecting, paints on it just as it would on the Graphics
// passed by the browser or applet viewer.
g.drawImage(offScreenBuffer, 0, 0, this);
// And now we transfer the info in the buffer onto the
// graphics context we got from the browser in one smooth
}Not only is this your 7th or 8th posting on this topic, you can't even wait 15 minutes before bumping the posting.
Your question is no more important than anyone elses on the forum and continually posting, starting new threads on the same topic is one sure way to get your posting ignored.
Maybe you are looking for
-
How do I create a .csv file on my mac?
I am having issues doing some reporting. I have a file that I pull from safari- I need to be able to put this into numbers. Typically, in windows, I would paste the info onto a notepad and save as .csv, then open again in numbers. So--I can't save
-
Satellite Pro A200 (PSAE4E) - BIOS chip location
Does anyone know the location of the BIOS chip on this Toshiba or have an image of something similar so I know what I am looking for? I have taken out the motherboard and despite a sticker that says ISKAA V1.20 BIOS, AAB4, U52 I cant find it (assumin
-
Mountain Lion: can't open Mail, Contacts & Calendars preference pane
Hi guys, I downloaded Mountain Lion this morning and am loving it. But I'm having a problem that so far I can't find anything about here or elsewhere on the web: I cannot open the Mail, Contacts & Calendars preference pane in System Preferences. Inst
-
How to send the type of tunnel in access-request?
Hello, I have a PPTP/L2TP access server and two groups of clients: PPTP-only clients and L2TP-only clients. All clients is authenticated with one Radius server. I need to send type of tunnel (PPTP or L2TP) to Radius to distinguish these groups of cli
-
I cannot display the block diagram when the VI is running
It is not possible to show the block diagram while the VI is runs. The frontpannel remains on the screen. When the VI is started from the block diagram, the frontpannel pops up and stays on the screen