Initialization or full load can't be carried out for 0CRM_OPPT_H

Hi,
   We have appended some custom fields to the SAP delivered data source 0crm_oppt_h and also created a custom ODS for capturing the additional fields. We were successfully populating the initialize as well as delta for the two ODSs( 0crm_opph, ycrmopph).
  Recently we upgraded our BW to BI for NW04S and in order to start afresh, I first deleted the data source from BWA7 entry, activated it again in BWA5, deleted the existing transfer routine, replicated the data source and regenerated the transfer routine, but activating the new business content.
I then went ahead and deleted the initialize option for delta while creating the info package and created a load with Initialize ( That deleted the RSA7 entry for the data source) and it failed to get the existing data in the CRM and it failed as well as Full later when I tried that option. However from that point onwards any delta would work normally ( BWA7 entry and RSA7 entry for the data source would become available) , Its the past data that I was not able to load at the start .
Right now I am in a situation where the delta works fine but I don't have the old Opportunity transaction data in my ODS.
Need help in being able to start the data load from the start, get the existing data and then be able to load the data in delta as well.
Looks like something do with BWA7, BWA5 etc etc. I have similar issue with data source 0CRM_SALES_ORDER_I and was to resolve the same by deleting BWA7 entry and start fresh by BWA5, replicating, generating the data source , transfer rule, infopackage etc.
Thanks
Arunava

Hi!
what is the error that you are getting in Fulload?
check the Tables SMOXHEAD_S SMOXRELP_s for mappings. try to debug the full load in RSA3.
with regards
ashwin

Similar Messages

  • Can I restore from an iTunes backup after setting up as a new phone when a full reboot/restore has been carried out?

    Can I restore from an iTunes backup after setting up as a new phone when a full reboot/restore has been carried out?

    As @wjosten says. Note, however, that it is important to NOT sync the phone after resetting it. A Sync will overwrite the backup that you want to restore.

  • Document Cancellation can not be carried Out

    Dear SAP experts,..
    I met a problem when carry a document cancellation..
    We had a material which incidentally exist without batch management and so, the material don't have batch number and so its Shelf Life Expiration Date.
    The material was used as usual. (Used for production process by Goods Issue for Production Order)..
    The condition keep going for about 3 weeks until the end user had a mistake with her data entry and so the document must be cancelled.
    The cancellation can't be carried out, and the message shows "Enter Shelf Life Expiration Date".
    My Question :
    - Why was Goods Issue transaction could be carried out without SLED and the cancellation must be carried out with SLED ..??
    - What is the best action to solve this problem...
    Regards,
    Hachi

    Dear,
    Are you getting message 12019?
    Have you maintained the SLED in Plant storage view 1 in material master?
    Set customizing so that it is not necessary to enter such a date for the used movement types. Maintain the data by using Transaction SM30 in View V_156_MHD.
    Or
    Deactivate using Customizing
    Customizing via the following path:
    Materials Management --> Inventory Management/Physical Inventory  --> Goods Receipt --> Set expiration date check.
    You should  deactivate the check for the used movement types,
    Regards,
    R.Brahmankar

  • Whether MRP can be carried out for work scheduling GR. 20 i.e. work to orde

    Dear Experts,
    Whether MRP can be carried out for work scheduling GR. 20 i.e. work to order.
    mahendra

    Hi MShirodkar,
    Yes, s and it specifies the time needed to process the material in the operations at the different work centers.
    The GR processing time depends on the order quantity.
    The GR processing time is required to calculate the lot size dependent in-house production time. The system then uses the in-house production time to determine the planned dates for planned orders in materials planning.
    You can define work scheduling times in the material master record in one of two ways.
    Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
    Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
    I hope it clears you doubt any queries please revert me back.
    Regards,
    Madhu.G

  • Tax can't carry out for some material and Cusomter

    Hi,
         We found the following two material at Customer(2811165) can't carry out the VAT for create sales order. But the Tax can carry out for the other customer. The customer(2811165) can carry out the VAT for other material sales order. I checked the customer and material the Contry code(KR) and Tax classification(1) is correct and normal. It is only the two material for the special customer can't get the VAT. I check the pricing analysis. The follwoing is the log. Pls help check it.Thanks.
    The mateials:
          KTPJC001-02
          KF-8005-0XXXXXXXXX
    The following is the log:
    Access Message Description
    08 010 Access not executed (Requirement 008 not fulfilled)
    10 010 Access not executed (Requirement 007 not fulfilled)
    20 010 Access not executed (Requirement 008 not fulfilled)
    Best Regards
    Park

    Dear Park
    It seems you have assigned Routine 008 for the table which has the combination of some description and applicable to domestic.  For the same combination, in VK13 / UTXJ, you have maintained a tax code for a domestic customer and you are trying to create a domestic sale order.  Actually routine 008 is meant for Exports and hence the problem.
    If my understanding is correct, Go to V/07, select the condition type JIND and click on "Accesses".  There check whether any routine is maintained under the tab "Requirement".   If so,  just remove  those routines and retry your process.
    thanks
    G. Lakshmipathi

  • Lost newly purchased Iphone5, Reported complain in police station but not getting proper responce. Can apple help me out for this?

    Lost newly purchased Iphone5, Reported complain in police station but not getting proper responce. Can apple help me out for this?

    Oh, don't worry. I know exactly. I'm a retired law enforcement officer after 30 years. I didn't mean for them to allow you to use the Internet, I meant for them to assign an officer to try and track the device for the victim. Again, that would require the victim to provide their Apple ID and password, which most would not want to provide.
    Pinging the phone as you mention is only when there is probable cause and that is done through the carrier.
    I'm glad to see someone also understand that a stolen cell phone is not as important to law enforcement as it is to the victim. It is unfortunate as smartphones get more expensive. Hopefully as iOS 7 makes it debut later this year, the work Apple has done will have some impact on smartphone theft. Other manufactures and carriers are starting to improve here in the states. It never was something carriers worryed about with blacklisting. This is where they were a step ahead in Europe.

  • Operation ' Change Attribute TSTATE ' could not be carried out for Request

    hi,
    i am unable to delete the request Id  from  DSO. and when i checked that, it says request is partially activated(error occured during the activation)
    and when i checked the logs i got the following error messages:
    Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
    Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      361'
    i even thought it was BASIS issue but it was not.
    due to this error the process chain is failing daily
    kindly help
    regards
    laksh

    hi arvind,
    i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
    but the problem is still there
    regards
    Laksh

  • Operation ' Modify attribute TSTATE ' could not be carried out for Petition

    Hi Experts, when try compress a infocube appear this error
    Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx
    The petition status is green.
    Any idea?
    Enrique.

    hi arvind,
    i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
    but the problem is still there
    regards
    Laksh

  • Allocate CO-PA  message Scalling carried out for segment SVVC1

    Hello
    i need some help
    when my user want to allocate COPA by transaction code KEU5
    she got message warning "Scalling carried out for segment SVVC1"
    Diagnosis
    the standardization of negative tracing factors was carried out in segment SVVC1.
    System response
    The tracing factors of the receiver are changed . this change the value for the receivers.
    Procedure.
    Standardization 4 was carried out.
    and I also found warning message.
    "Sendor base in period 8 is 0 therefore no allocation is possible"
    Diagnosis
    the total base value for sendor   Costcenter nameXXXXXX  in period 8 is 0. this value is derived from total of all receiver allocation bases.
    System response
    it is not possible to distribute the sender value because calculating the receiver values according to the formula.
    sender value X receiver allocation base / sender base would terminate the program . the sender is therefore not credited for period.
    Segment for allocate have segment for allocate from costcenter AAA costelement group BBB
    I check in Cost center report. using selection screen input cost center AAA and cost element group BBB for period 8
    and i found that value is -70,000
    and why doesnot -70,000 cannot allocate ?
    and does have way to solve it or not ?
    please help
    Edited by: dittaporn nanasilp on Sep 4, 2010 11:12 AM

    OK

  • Scheduling can not be carried out

    Hi Gurus,
    i am facing some problem in scheduling of production orders,during creation of production order system gives an error message "No reqmts/caps exists or not relevant
    scheduling". I have already defined the capacities in capacity header tab page and marked relevent to finite scheduling indicator.
    msg no -CY 298
    chandan sood

    Hi Jiual,
    i have maintained the following settings for scheduling;
    1.OPJK : Capacity Availability Check ,Over all profile.
    2.In OPU3 : On Detailed Scheduling tab i have maintained SellD,Generate Capacity tab check box ticked,Scheduling Ticked.
    3.OPCG: Define operation Control key , i have ticked the Scheduling check box ticked.
    4.CA02 capacity header the active version 1
    5.relevent to finite scheduling check box ticked on capacity header tab page of work centre.
    6.shift timings on capacity header tab page of workcentre.
    7In opu5 combination of plant, order type and production scheduler is maintained.
    still scheduling is not carried out.system proposes the same time and date as provided in basic finish date for backward scheduling.
    regards
    chandan sood

  • The error showing as Fiscal year change has not carried out for the coCd

    Hi all,
    I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
    Fiscal year change not yet made for company code PWAL
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code PWAL.
    Proceed
    The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
    Debabrata

    Hi Debabrata,
    You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
    Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week.  All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

  • Oracle BI Apps - EBS R12 Full load - manually i.e. with out DAC??

    Hi All,
    I tried BI Apps 7.9.6.2 installation, I am stuck with a [DAC error|https://forums.oracle.com/forums/thread.jspa?threadID=2358072&tstart=15] , the solution is to install a DAC patch. I don't have any Oracle support account & can't afford one, so installing the patch is out of question. Now my plan is to execute Informatica workflows manually........What are your thoughts on this? Is it a bad idea that takes 6 months at least and not guaranteed?
    Please give me your suggestions or point me to any materials that helps me in this path.......
    Thanks for your time,
    DK

    Hi
    I think you need to add the following parameter to informatica,
    in the admin console go to custom properties
    add
    overrideMpltVarWithMapVar value yes
    thx

  • Help!! order can not be carried out

    Hi all,
    I am trying to create a shoping cart with a shop on behalf ID and when I press the order button I receive the following error message:
    Line1: Partner Goods recipient not found
    and below that there is a warning message that says:
    The use of the last 5 characters in field CITY1 is restricted (38 of 40)
    Do you know what is wrong here?

    Hi Maria,
    For the warning message; proceed as it follows:
    -TX SM30.
    -V_T100C
    -Application Area: AM.
    -Generate an entry for Message 228 with value "switch off message" in the field Online.
    For the topic around Partner Good recipient. Review User who you are shopping for. Try with another one in order to discard a general issue.
    Thanks and Regards,
    Abraham

  • What are the steps to be carried out for  installing 0cca_cc1 - business

    Hi All,
    what are the steps to be done for 0cca_cc1 for installation of business content and then how is the data extracted from r/3?
      - how to install nor use the standard queries and there are 2 update rules how to activate them too? for 0cca_cc1.
    Pls let me know the url for standard datasource for 0cca_cc1
    Thanks
    Pooja

    Goto source system (e.g. R/3). Execute RSA5 transaction.CLick on SAP and press + symbol on the top. then press find to get your datasource. press activate datasource. This will activate your datasource. In RSA6 you will get the activated datasource.
    Then in BI side you replicate your datasources and the installed datasource will be visible. Then create the data flow if not installed.
    Delta is relatively a big topic. Refer following:
    /people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    What you need to do from your end is create init infopackage, load the data. Once done create delta infopackage and load the data. If you are in 7.x then need to create DTP accordingly.
    But just remember the datasource should be delta capable. In infopackage when you get only full option then you can say the datasource is not delta capable.
    Edited by: Shailesh Naik on May 11, 2009 11:08 AM

  • How can we take print out for challen no. create d by J1INCHLN

    hi,.
    actually i forgot to take print after running J1INCHLN  .
    how can we take printout or display without running J1INCHLN .
    one challen number is created , is there any tcode to view or print.
    regards.
    hari priya

    hi,
    We can use the T.code  J1INMIS. GOTO   Report selection option & select challan Update status.
    Excute the report. you will get a list of all bank challan made so far. Then select the required document & take print.
    The Process is :
    Invoice in FB60/MIRO
    Bank Remittance - J1INCHLN
    Bank Challn Update - J1INBANK
    TDS Print - J1INCERT.
    assign points if found useful
    Regards,
    R.Ramakrishnaraj

Maybe you are looking for