INOB Issue while archiving WBS and Networks

Hi All,
I am using PS_PROJECT archiving object for archiving WBS Elements and Networks. But during Write phase, below error message was dislplayed:
Error Message
There is no entry for instance 000000000001489184 in either INOB or IBase
Job cancelled after system exception ERROR_MESSAGE
Could you please help me when this error occurs and how to solve this problem.
Version: SAP R/3 4.7
Regards,
Sandeep

Check tcode CUTABLEINFO and insert the instance number you have into the Instance(CUOBJ) field.
Be sure to check at the very least at the bottom of the screen the check boxes for IBINOBS and IBINOWN.
The owner of the configuration is the object that originated the instance.
An observer of the instance is simply an object that needed a copy of the characteristic values in the instance. If any transaction can find your instance's owner, it's this one.
Or
You can also refer SAP 1470060 - Error CX 074 (There is no entry for instance XXX in either INOB or IBase)
Hope it can assist you.
Thanks & Regards
JP

Similar Messages

  • Issue while archiving the processed file in sender communication channel using SFTP adapter

    Hi All,
    In one of my scenario (File to IDOC), we are using SFTP sender communicationchannel.
    we are facing an issue while archiving the processed file. Some times PI processed the file successfully but unable to archive it and in the next poll PI process & archives the same file successfully which will creates duplicate orders in ECC.
    Please let us know how to resolve this issue.

    Hi Anil,
    Refer Archiving concepts in below links.
    http://help.sap.com/saphelp_nw73/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm?frameset=/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
    http://scn.sap.com/docs/DOC-35572
    Warm Regards,
    DNK Siddhardha.

  • Unable to caluclate cost in CJ20 for wbs and network level.

    Hi All,
    I have a query in the project Builder(CJ20N).
    I created Project>WBS Elements>Network> and posted costs via assigning activity.
    If I select an activity and go to edit>Costs,  the "calculate costs" option is activated.  ( I get "Message Costs were calculated: See menu Edit -> Costs -> Planned - Actual")
    And also I am able to view the cost in Edit>Costs> Plan/Actual.. "Activity/Element". Please see the screenshots of Plan /actual comparison.
    However if I select the WBS or Network and go to edit>Costs,  the "calculate costs" option is disabled (frozen) and also in the same path Plan/Actual> "activity/Element"  option is disabled (Frozen).
    Request you to review the attached screenshot and advise is there any way to defreeze the option "calculate costs" and view the costs in WBS and Network level?

    Hi,
    why you want to see plan cost in project builder CJ20n? any specific reason please let us know...
    every structure report having this kind of feather as CN41n/CNS41 then check these two report.
    and lots of hierarchical report is there for seeking plant cost in project as Gokul suggested above.
    so in project builder only plan VS actual cost can be look like by network activity.
    Regards,
    Sanjeev

  • Issue while integrating  OID and BPEL.

    Issue while integrating OID and BPEL.
    We followed steps mentioned in for integration. WE have two SoA instances, home, oc4j_soa.
    http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF
    Before running configure_oid.bat script, we changed jazn.xml to include the contents that are available in home\jazn.xml.
    The contents we replaced contain
    <jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="my-realm" >
         <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
         <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
         <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
         <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
         <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
         <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
         <property name="idm.token.type" value="HTTP_COOKIE" />
         <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
         <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
         <property name="ldap.protocol" value="no-ssl" />
         <property name="idm.authentication.name" value="JavaSSO" />
    </jazn>
    configure_oid.bat ran successfully.
    But when we try restarting SoA, it gives error. If we replace the above to point to XML-based jazn then SoA starts succcessfully.
    Please let us know if we are missing anything.
    Regards
    Yatan

    *1.) No I am not able to complete 2.1.3.3 step 3 the*
    work list application is showing "authentication fail"
    user look up is showing "unable to find the realm with name my-realm "
    *2.) After 2.1.3.3 step 2, if I try restarting the SOA suite, it throws following error.*------------------------------------------------------------------------------------------------------------------------------------------------------------
    Configuration information
    Running in C:\product\10.1.3.1\OracleAS_1
    Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
    Oracle home:C:\product\10.1.3.1\OracleAS_1
    Oracle home name:Unnamed
    Instance name:ias_soa.myhost
    Instance type:allProducts
    Version:10.1.3.1.0
    Uses infrastructure:false
    Not an infrastructure instance, no infrastructure information available
    Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
    2009-06-29 04:10:49.962--Begin log output for Mid-tier services (ias_soa.myhost)
    2009-06-29 04:10:49.962--Processing Step: starting OPMN
    2009-06-29 04:10:57.493--Processing Step: starting OPMN managed processes
    2009-06-29 04:11:22.806--End log output for Mid-tier services (ias_soa.myhost)
    An unknown OPMN error has occured
    oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: oc4j_soa
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         ... 6 more
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    Exception caused by
    There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: oc4j_soa
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
    oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: oc4j_soa
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    <?xml version='1.0' encoding='WINDOWS-1252'?>
    <response>
    <msg code="-82" text="Remote request with weak authentication.">
    </msg>
    <opmn id="bg1ws0008:6201" http-status="206" http-response="2 of 3 processes started.">
    <ias-instance id="ias_soa.myhost">
    <ias-component id="default_group">
    <process-type id="home">
    <process-set id="default_group">
    <process id="91427687" pid="4148" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
    <msg code="0" text="">
    </msg>
    </process>
    </process-set>
    </process-type>
    <process-type id="oc4j_soa">
    <process-set id="default_group">
    <process id="91427688" pid="5856" status="Init" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
    <msg code="-21" text="failed to start a managed process after the maximum retry limit">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    <ias-component id="HTTP_Server">
    <process-type id="HTTP_Server">
    <process-set id="HTTP_Server">
    <process id="91427686" pid="5140" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
    <msg code="0" text="">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    </ias-instance>
    </opmn>
    </response>
    *3.) opmnctl status -all ?*
    C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl status -all
    Usage:
    opmnctl [<scope>] status [<options>] [host port]
    Notes:
    - if host,port is specified, contact opmn on host,port;
    otherwise, contact opmn in local ias instance.
    scope:
    @instance(:name)*|@cluster
    scope specifies how far to apply the query. To apply the query to
    all known iAS Instances, specify "cluster". To apply the query
    to a specific set of 1 or more iAS Instances, specify
    "instance(:instname(:instname...))". If no names are supplied
    in an instance scope string then the request is applied to the
    "local" instance. In this context, "local" means the instance
    containing the opmn server handling the request.
    Default: local iAS Instance.
    Options:
    [ias-component|oc4j-group]=id
    - filter output by ias-component name
    - i.e. filter output by oc4j-group name
    -l - pre-selected long output format:
    %cmp32%prt18%pid7R%sta8%uid10R%mem8R%utm9R%por
    -fmt <fmtlist> - output format (see details below)
    Option "-fmt <fmtlist>" and "-l" are mutually exclusive
    -fsep <string> - field separator (default:" | ")
    -rsep <string> - record separator (default:"\n")
    -noheaders - don't print a header
    -c <count> - number of times to print status (default:1)
    -i <nsecs> - seconds between each print (default:5)
    -app [-l] - application status (optional long format)
    -port - opmn "request" host and port (scope
    argument invalid)
    Format String Syntax:
    <fmtlist> - A single string containing one or more statistic
    identifiers concatenated together where each identifier has
    the following format: %<statname>[<width>[<justification>]]
    default: %cmp32%prt18%pid7R%sta8
    <statname> - Must be one of the following:
    ins - iAS Instance Name
    cmp - iAS Component Id
    prt - Process Type Id
    prs - Process Set Id
    idx - Index of process in Process Set
    pid - OS Process Identifier
    uid - Opmn Unique Id
    typ - Name for this kind of process
    sta - Process status
    stm - start time (ms)
    utm - up time (ms)
    cpu - cpu time (ms)
    mem - memory used (Kb)
    pme - private memory (Kb)
    sme - shared memory (Kb)
    hpz - heap size (Kb)
    por - Port List
    <width> - The number of columns to use for this field. Output
    less than this value will receive padding according to the
    specified justification. Output more than this value will
    be truncated and terminated with '~'.
    default: the width of each datum
    <justification> - How to justify output when less than the width.
    Must be L, R, or C (left, right, or center justification).
    default: L
    4.) SOA Suite version ? *10.1.3.1.0*
    5.) Did you manually tweak some configuration file or followed the documentation as it is ? I have followed the document as it is.
    I have changed only jazn.xml available in ..j2ee/oc4j_soa suite to have the below section:  This section was copied from jazn.xml of ..j2ee/home directory that has been automatically updated after running configure_oid.bat file
    <jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="LDAP" location="ldap://myhost:389" default-realm="myrealm" >
         <property name="custom.sso.url.login" value="/jsso/SSOLogin" />
         <property name="ldap.user" value="orclApplicationCommonName=jaznadmin2,cn=JAZNContext,cn=products,cn=OracleContext" />
         <property name="ldap.password" value="{903}dA0r1HydR5qIhjAn2OCLMSWlFXeLdV//sCLFNwSfWhE=" />
         <property name="custom.sso.key.alias" value="ssoSymmetricKey" />
         <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter" />
         <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector" />
         <property name="idm.token.type" value="HTTP_COOKIE" />
         <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO" />
         <property name="custom.sso.url.logout" value="/jsso/SSOLogout" />
         <property name="ldap.protocol" value="no-ssl" />
         <property name="idm.authentication.name" value="JavaSSO" />
    </jazn>
    instead of
    <jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com">
    <!-- properties to configure the 3rd party IDM framework -->
         <property name="idm.authentication.name" value="JavaSSO"/>
         <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
         <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
         <property name="idm.token.type" value="HTTP_COOKIE"/>
         <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>
    <!-- properties for the out of the box Java SSO -->
         <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
         <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
         <property name="custom.sso.key.alias" value="ssoSymmetricKey"/>
    </jazn>

  • Issues while archiving Invoice documents

    Hi all,
    While archiving Invoice documents using MM_REBEL(using company code only), it was found that the write job is picking up certain open Invoices also. ie the subsequent Accounting document was not cleared/archived.
    My understanding was the system will check for retention periods and whether the subsequent documents are archived or not.
    I just wanted to know if there are any extra checks , which it looks for , as the criterion for archiveablility.
    Please let me know if anyone knows about this or if any of you have faced similar issues .
    Regards,
    Shail.

    hi,
    Dependencies
    The status of the document determines whether it can be archived:
    ·        Documents with the status Closed or Deleted can be archived.
    ·        Documents with the status Unchecked, Checked and Errors Found, or Checked and No Errors Found cannot be archived.
    Financial accounting documents generated when invoice documents are posted are not archived with the object MM_REBEL. They are archived in Financial Accounting.
    Residence Time/Retention Period of Data in the System
    The retention period for invoice documents can be configured in the Customizing system. The posting date contained in the invoice document header is the key date for the retention period.
    If a retention period has not been set in Customizing, the system takes the minimum retention period as 9999 days.
    Presettings
    In Customizing for Invoice Verification you can set the retention period for invoice documents per company code under Define Document Lives.
    Hope it helps..
    Regards
    Priyanka.P

  • User status linking between wbs and network

    Dear All,
    I got one requirement in which i am using user status at wbs level to block all the transactions. Now the  problem which i am getting is that even though i am maintaining the user status at wbs level, users are able to post the data on network activities. If i am maintaining the user status at activity level than i am able to stop the same.
    Kindly suggest cant we maintain user status at wbs level and stop fi posting at activity level. Is there any way to achieve this.
    Regards
    Abhishek Sinha

    Dear Abhishek,
    Use same sataus profile on Neworks also after having included Network activity & Network header as affected object types in OK02
    regards,
    Sam L.

  • Statistical WBS and Network

    Dear All,
    We have budget control activated on cost centers via the use of PSM. We now want to use Project System module to execute a project for which cost will be charged onto a cost center. An option already investigated is that of using statistical WBS, which provides two advantages:
    1) No hassle of periodic settlement to cost center as cost is updated simultaneously.
    2) Budget control remains in-tact because any cost posted (statistically, i.e. type '11') on a wbs will be posted (actually, i.e. type '4') on the cost center for which budget would be checked.
    My problem arises when we try to use networks. It is my understanding that network orders cannot be made statistical and therefore any cost posted to them (either direct journal entry or via PO, GR/IR) is done actually (i.e. type '4') and not statistically. No actual entry is posted on the cost center, and I have to manually run the settlement on the network. This settlement process than automatically posts the cost to wbs which eventually goes as actual cost to the cost center. However this case has two major problems:
    1) Increased overhead of periodic settlement for the network
    2) No budget control as cost posted on the network can exceed budget available on the cost center (the budget error would only arise when settling the network).
    My prime objective is for the budget control to remain in-tact for which i need an option of automatic cost posting from the network to the cost center as soon as it is posted (something possible for statistical wbs).
    Any help in this regards would be highly appreciated.
    Regards,
    Ammar Zaheer

    Is there any work around? I heard about periodic reposting, has anyone tried it before? What if I create my PR or PO on the statistical WBS?
    Regards.
    Ammar Zaheer

  • Issues while building formulas and expressions

    Hi,
    I have a couple of questions regarding the formulas and expressions in MDM. It would be a great help if someone could us on these:
    <b>1</b>.While creating a Syndication map in MDM Syndicator, we need to do some calculation on some of the attributes/fields and need to store results in new Custom fields.  The problem is when we create a new Custom Item and use Formula to create a formula like <MM Number:mm number> * 12, it is showing us result in Destination Preview as 100*12 rather than computing the value as 1200. The same is the case is for UOM conversion where we want to convert inches into feet. Can we do such such asthmatic calculations in syndicator? Is there any other way to get the same result?
    <b>2</b> Calculated Filed Expression Builder screen for any table field in Console has Attribute List option always disabled. Only the Fields list is available on this screen. The same is the case for Validation and Assignment builders in Data Manager. Is it possible to select Attributes as well while creating “Calculated field Expressions” (Console) Validation and Assignment Expressions (Data Manager)?
    We are using MDM 5,5 SP4 Patch01 on Windows XP Professional.
    Thanks for your help.
    Regards,
    -Irfan

    Hi Irfan,
    1) If you want to use formula like 100*12 and want to get result than syndicator is not for this.This kind of formula should be used in Data manager. Custom field in syndicator is not for this purpose. When you want to add and custom field in your output file which is not present in your current display than with the help of Custom field, you can see that field in Destination Preview.
    Follow below link for more clarification
    <a href="http://help.sap.com/saphelp_mdmgds55/helpdata/EN/28/52a8a6076d4979b08c27c7ca3aab8d/frameset.htm">Custom Fileld in Syndicator</a>
    Hope this helps,
    Regards,
    Ron
    Reward point for helpful answer
    Message was edited by:
            Ron

  • Issue with InDesign cs5 and network files.

    On Mavericks having issues with InDesign CS5. When trying to open a file from an smb netwrok drive it goes into Not responding.
    have tested InDesign working correctly with local files.
    have tried removing, SING folder. tried reinstalling.
    all updates on OS and adobe InDesign have been installed.
    any suggestions would be appreciated.

    CS5 is unsupported under Mavericks.
    Unfortunately, you’re pretty much on your own here.

  • Issues with MBP C2D and networks with any PCs attached...

    So for a long time any time I go to anyone's home with a wireless network, I will jump on and the network will stop working for anyone but me. This happened recently when my girlfriend updated from a netgear that broke to a Linksys wrt54gs. Any time I connect my MBP C2D to it wirelessly I know out the rest of the house, 2 desktop PCs. I also have this problem at my store where it affects the people working around me, so that they cannot connect to the net, which is a BIG hinderance to them, obviously. I had this problem with my wrt54g and changed the firmware to one noted somewhere else (different forum) and it works fine, PS3, and everything connected works perfectly. I am almost to the point of buying a PC so I stop knocking out peoples networks, any thoughts on this, I don't want to have to go back to a PC
    Oh and I am using a WEP 128bit hex and no other security on both networks.

    I had similar problems with a WRT54G Linksys Router, and after a bunch of searching, I found that there is a problem with the latest firmware on the router. I downgraded the firmware as the post recommended (Linksys Forum) and now all my macs can connect.
    Here's a link to the post I found on the Linksys site that solved my problems:
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&messag e.id=10007#M10007

  • PS Issue Business Area and Profit Center - differing in WBS to Network

    Hi
    my team has used COPY NETWORK option and copied a network under WBS in Project Builder (CJ20N), It has observed that org elements of WBS and Network, Acticity are differing.
    Now there are thounds of records of the same, (Org Elements differing in WBS to Network).
    Can you sugest me is there any option to resolve the issue and settlement can be made correctly
    regards
    sri

    Hi
    Once actual postings are made on object (like network or WBS element) you cannot change CO elements (profit center, business area). Those will be disabled. However if no postings happen then you can edit those data.
    If postings already happened and you are not able to change the fields, you can create new network and activity under same WBS element and can transfer the cost (line item wise) through FI (I belive F-02 or FB50 transactions). Please check with your FI counter part once.

  • How to upload and download Long text for WBS, Project, Network

    Hi all,
    I have two isssues.
    1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
    BAPI_PROJECTDEF_GETDETAIL
    BAPI_PROJECT_GETINFO
    BAPI_NETWORK_GETINFO
    BAPI_BUS2054_GETDATA
    I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
    The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
    2)  I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
    All help will be greatly appreciated and rewarded.
    Thanks & Regards,
    Rajanidhi Rajasekeran.

    One thread in the correct forum is good enough, no need to double post across ABAP forums.  Thanks.
    Regards,
    Rich Heilman

  • Do not buy a 4510L - internet randomly hangs while browsing - likely 4G network issues

    Ok, so I was excited to jump into a 4G wifi hotspot. I did some quick research and noticed the Samsung 4G hotspot was having some internet connection issues. Samsung had released an update but I didn't want to bother. I mentioned to the Verizon Wireless sales person the hotspot issues and she mentioned she hadn't seen any issues with the Samsung or Mifi device... so I purchased the mifi4510L... and so starts the nightmare!
    So the mifi4510L device started up and I connected to the internet. My connection speed was slower than my 3G ATT smartphone. I restarted the device a few times and finally noticed really high speeds both down and up. Apparently upon reading the manual, at first it was flashing yellow (3G connection) and after 30 minutes it finally found the 4G (flashing green) with 4 bars.
    I immediately start noticing that when I'm working, websites start to randomly hang... using windows xp. I restarted the device numerous times, took out the battery, sim card and it still would hang on random websites. So I tried using my personal Windows 7 laptop... same problem... how about my Android smartphone on wifi... same problem... oh and an old laptop I have at home with Windows Vista... same problem.
    So, of course, the first thing to do is jump on google to see if this is a wide spread problem with mifi. The problem is though, that many people don't know how to describe the problem. I saw a few instances of people having somewhat similar problems and exchanging the device numerous times and even switching out sim cards.
    By now it is very late at night/early morning. I thought since many people seem to be having issues maybe Verizon customer service would be aware of the problem and could help. Well now I was talking to someone who barely speaks english. He has no idea about what this mifi thing is and has never dealt with any tech support regarding the device. I was put on hold while he researched the issue, I asked about resetting the device, and he mentioned the Mifi has no reset button... later, I found a pdf of the manual and found the reset button..I was working in the dark and never noticed it was right there in front of me, So before I hung up the phone, Verizon customer service promised they would call within 48hrs and give me an update on what they had found... It's been a month and still no call.
    So a week later, the problem is still occurring, even at different locations with 4bars on 4G. I decided to stop by the Verizon wireless store. I asked about issues with the mifi and was told there weren't any issues. I found this strange since I had now seen so many posts online about the problems people were having. I tried every salesman in the store and was told the same. Ok so now I wanted to try out the Samsung hotspot. At first I was told I could only exchange it for another mifi... then they said oh I would just have to pay a restocking fee. Some online posts seemed to suggest that exchanging the device and sim card helped so I did just that. I made it home, and the first thing I notice is that now I had no sim card... a trip back to the store to pick up the sim card. It took about 10-15 minutes before it established the 4G connection but I was back up and running. I was online for about 10 minutes and no hang so I went to bed.
    Another week goes by and  now I am really frustrated. Calls to Verizon are the typical; there are no problems, just reset,restart,or go exchange for a new one.
    And now I found the following video that suggests it's the 4G network itself.
    http://www.youtube.com/watch?v=-AQMMK87N2g
    Verizon is supposed to be a great company! Why would they destroy their reputation just to make a quick few million dollars. The Customer Service/tech support was a horrible experience and the 4G network doesn't seem to work properly.
    A call tonight to Verizon concluded with "well with any new technology there are bound to be some issues, over time Verizon should have some type of fix".
    Where is the class action lawsuit?!?!

    JV1, if you are early enough to get out of the contract, do it! If you browse through these forums (and other on internet) you will find this is Verizon 4G, it will NOT get better anytime soon. This problem has existed since launch, through the 4510L is the worst device they have, it's not the culprit, I have had all of them.  It is the network.
    Oh and by the way, Verizon isn't stupid, someone else pointed out to me the small print on the contract prohibits you from pursuing a class action suit against them.  All disputes have to be settled by arbitration which is binding per contract.  Guess they knew this would happen......

  • Kernel Panic while transfering data between MAC HD and network drives

     Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
    Here is the log fine  with error code:
    Error code: 0x0000000000000000
    Interval Since Last Panic Report:  5 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
    Tue Aug 16 14:54:46 2011
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
    RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
    RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80de173b40 : 0xffffff8000204d15
    0xffffff80de173c40 : 0xffffff80002d1208
    0xffffff80de173d90 : 0xffffff80002e3f4a
    0xffffff80de173da0 : 0xffffff7f815c6b54
    0xffffff80de173ed0 : 0xffffff80002524fe
    0xffffff80de173f00 : 0xffffff8000478c7f
    0xffffff80de173f40 : 0xffffff7f8159b158
    0xffffff80de173fa0 : 0xffffff80002c8527
          Kernel Extensions in backtrace (with dependencies):
             com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
                dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
             com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: iMac12,1 (Mac-942B5BF58194151B)
    System uptime in nanoseconds: 105374280984
    unloaded kexts:
    (none)
    loaded kexts:
    com.vmware.kext.vmnet            3.1.3
    com.vmware.kext.vmioplug       3.1.3
    com.vmware.kext.vmci                3.1.3
    com.trendmicro.kext.KERedirect              1.0.0
    com.trendmicro.kext.filehook   1.5.0
    com.vmware.kext.vmx86            3.1.3
    com.thursby.kext.cifs    5.1
    com.thursby.kext.NetBIOS         5.1
    com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.AppleTyMCEDriver      1.0.2d2
    com.apple.driver.AppleHWSensor           1.9.3d0
    com.apple.driver.AudioAUUC    1.57
    com.apple.driver.AppleUpstreamUserClient      3.5.7
    com.apple.driver.AppleMikeyHIDDriver                1.2.0
    com.apple.driver.AppleMCCSControl     1.0.20
    com.apple.driver.AppleIntelPenrynProfile           17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyDriver       2.0.5f14
    com.apple.kext.ATIFramebuffer              6.3.6
    com.apple.driver.AppleBluetoothMultitouch     54.3
    com.apple.driver.AppleIntelHDGraphics               6.3.6
    com.apple.driver.AppleIntelNehalemProfile       11
    com.apple.driver.AudioIPCDriver             1.1.6
    com.apple.driver.AppleHDA       2.0.5f14
    com.apple.driver.AppleGraphicsControl               2.10.6
    com.apple.ATIRadeonX3000       6.3.6
    com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.AirPort.Atheros9388   426.35.3
    com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
    com.apple.driver.AppleLPC         1.5.1
    com.apple.driver.AppleBacklight              170.0.46
    com.apple.kext.AppleSMCLMU                1.5.2d10
    com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
    com.apple.driver.AppleUSBCardReader                2.6.1
    com.apple.driver.AppleIRController        303.8
    com.apple.iokit.SCSITaskUserClient        2.6.8
    com.apple.iokit.IOAHCIBlockStorage      1.6.4
    com.apple.driver.AppleUSBHub               4.2.4
    com.apple.driver.AppleFWOHCI               4.7.3
    com.apple.BootCache   31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleAHCIPort             2.1.7
    com.apple.driver.AppleUSBEHCI              4.2.4
    com.apple.driver.AppleUSBUHCI             4.2.0
    com.apple.driver.AppleACPIButtons      1.3.6
    com.apple.driver.AppleRTC        1.3.1
    com.apple.driver.AppleHPET      1.5
    com.apple.driver.AppleSMBIOS                1.7
    com.apple.driver.AppleACPIEC 1.3.6
    com.apple.driver.AppleAPIC      1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
    com.apple.security.sandbox       1
    com.apple.security.quarantine  0
    com.apple.nke.applicationfirewall           2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
    com.apple.driver.AppleProfileReadCounterAction           17
    com.apple.driver.AppleProfileTimestampAction               10
    com.apple.driver.AppleProfileThreadInfoAction               14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction       10
    com.apple.driver.AppleProfileCallstackAction    20
    com.apple.iokit.IOSurface           74.2
    com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
    com.apple.iokit.IOSerialFamily   10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
    com.apple.driver.AppleMultitouchDriver             207.11
    com.apple.driver.DspFuncLib     2.0.5f14
    com.apple.iokit.IOAudioFamily  1.8.3fc2
    com.apple.kext.OSvKernDSPLib                1.3
    com.apple.driver.AppleSMBusController              1.0.10d0
    com.apple.iokit.IOFireWireIP     2.0.3
    com.apple.iokit.AppleProfileFamily         41
    com.apple.driver.AppleHDAController   2.0.5f14
    com.apple.iokit.IOHDAFamily     2.0.5f14
    com.apple.iokit.IO80211Family  320.1
    com.apple.iokit.IONetworkingFamily      1.10
    com.apple.driver.IOPlatformPluginFamily            4.7.0a1
    com.apple.driver.AppleSMBusPCI           1.0.10d0
    com.apple.driver.AppleBacklightExpert 1.0.1
    com.apple.iokit.IONDRVSupport              2.2
    com.apple.driver.AppleSMC       3.1.0d5
    com.apple.driver.AppleThunderboltEDMSink     1.1.1
    com.apple.driver.AppleThunderboltEDMSource               1.1.1
    com.apple.kext.ATI6000Controller           6.3.6
    com.apple.kext.ATISupport        6.3.6
    com.apple.iokit.IOGraphicsFamily            2.2
    com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
    com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
    com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
    com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
    com.apple.driver.AppleUSBHIDKeyboard             141.5
    com.apple.driver.AppleHIDKeyboard     141.5
    com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
    com.apple.iokit.IOBluetoothFamily         2.4.5f3
    com.apple.iokit.IOUSBMassStorageClass              2.6.7
    com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
    com.apple.iokit.IOUSBHIDDriver               4.2.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
    com.apple.iokit.IOBDStorageFamily        1.6
    com.apple.iokit.IODVDStorageFamily     1.6
    com.apple.iokit.IOCDStorageFamily        1.6.1
    com.apple.driver.AppleUSBMergeNub 4.2.4
    com.apple.driver.AppleUSBComposite  3.9.0
    com.apple.driver.XsanFilter        402.1
    com.apple.iokit.IOAHCISerialATAPI         1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
    com.apple.driver.AppleThunderboltNHI               1.2.6
    com.apple.iokit.IOThunderboltFamily    1.4.9
    com.apple.iokit.IOFireWireFamily            4.2.6
    com.apple.iokit.IOUSBUserClient             4.2.4
    com.apple.driver.AppleFileSystemDriver              2.0
    com.apple.iokit.IOAHCIFamily    2.0.6
    com.apple.iokit.IOUSBFamily     4.2.4
    com.apple.driver.AppleEFIRuntime         1.4.0
    com.apple.iokit.IOHIDFamily      1.6.6
    com.apple.iokit.IOSMBusFamily                1.1
    com.apple.security.TMSafetyNet             6
    com.apple.kext.AppleMatch      1.0.0d1
    com.apple.driver.DiskImages     289
    com.apple.iokit.IOStorageFamily              1.6.3
    com.apple.driver.AppleACPIPlatform     1.3.6
    com.apple.iokit.IOPCIFamily       2.6.5
    com.apple.iokit.IOACPIFamily    1.3.0
    System Profile:
    Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
    Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
    Serial ATA Device: OPTIARC DVD RW AD-5690H
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Officejet Pro 8000 A809, 0x03f0  (Hewlett Packard), 0x3612, 0xfd140000 / 5
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x850b, 0xfa200000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfa130000 / 5
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfa132000 / 8
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0xfa111000 / 6

    There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
    You might now create a new temporary user account. Log into the new account. Do the panics still occur?
    I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for