Input date show incorrect

Hi all
problem from thailand
I have a problem about date
we set NLS_DATE_FORMAT = 'DD/MM/RRRR',NLS_CALENDAR = THAI_BUDDHA
when I input data(date) in form like 010150 ==> 01/01/2450 that should be 01/01/2550
I am not sure ,Oracle have patched to fix this problem or not
we have used developer 6i
Please help me krap because that effect all of my system
Thx in advance

humm.. what are u doing in 24th century.... 8-) can u specify ur problem in bit more detail.

Similar Messages

  • Material availabity date showing incorrectly in sales order schedule line

    Hi ALL,
    In Sales order Schedule line(after clicking shipping i.e displaying bottom of the screen)  material availabity date is coming incorrectly . In my material in mrp2 view i selected proceument type as F and i gave planned delivery  time as 19 days and GR processing days as 1 . suppose if i am putting sales order as on today 9-6-2010 it should show material avaialbity date as
    7-7-2010 but it is showing 10 days more (excluding saturday and sunday) . So please give me suggestion where to check in the program SAPMV45A.
    Regards
    R.Vijayakumar

    Check to see if your pick, pack,transportation planning lead time etc are also being included.

  • Problem validating an two Input Date components !...

    Hi to all the users !. I would like to tell my problem... I have two input dates ("from" and "to") and I would like that the value from the "from" component isn't higher than the value from the "to" component... For that, I have use a validateDateTimeRange validator and set the "Maximum" value... My problem is that I don't get validated my inputdates components and additionally, when I select a date it appears with a strange format... Although I set the pattern to "dd/mm/yyyy" !... Let say... If I choose the 23th of July of 2012, the input date show "23/58/2012"... What would be the problem ?... Thankx !...

    Navaneetha: Thankx for your help !; I will check it right now... I didn't answer as I was having lunch ! :D Thankx again
    Suresh: A friend from another group told me that and the problem was solved !; anyway... Thankx for your time ! :d

  • Crystal report showing Incorrect data against Bex Query

    I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
    I don't know what can be wrong here?
    We are Business Objects 3.1 SP3.
    Thanks,
    Ravi

    HI,
    I would suggest you trace the workflow in Web INtelligence according to these notes:
    Tracing:
    Unix : Note 1235111
    Windows : Note 1260004
    and then post a link for downloading the trace files here.
    regards
    Ingo

  • Report Viewer shows incorrect data when viewing pages from last to first

    Post Author: Fmorales
    CA Forum: .NET
    Hello.
    I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
    If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
    If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one... 
    In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
    It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
    The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
    WhilePrintingRecords;
    CurrencyVar margenActual;
    which is being increasing or decreasing along the group:
    WhilePrintingRecords;
    CurrencyVar actual:=actual+CurrentFieldValue; 
    if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then         CurrencyVar margenActual:=margenActual-CurrentFieldValueelse    CurrencyVar margenActual:=margenActual+CurrentFieldValue;
    DefaultAttribute
    It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
    In the inner section I reset the actual value (this value always go fine):
    WhilePrintingRecords;
    CurrencyVar actual:=0; 
    Before end of year I reset the margenActual value:
    WhilePrintingRecords;
    CurrencyVar margenActual:=0; 
    I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
    Any idea?
    Thanks a lot

    quote:
    Originally posted by:
    ntsiii
    If you were previously using <mxXML> you WERE using
    e4x.
    So remove that tag, create an instance variable of the same
    name, typed as xml, and in your result handler, do as VarioPegged
    suggests, though I would cast/convert to xml first:
    companies = XML(event.result);
    trace(companies.toXMLString()); to look at your xml
    var xlCompanies:XMLList = xmlCompanies..company; //all such
    expressions return XMLList, never XML
    trace(xmlCompanies.length()); //
    Tracy
    Ok so the ID of the mxXML was being interpreted as an E4X
    variable at compile time?
    I tried changing the name of the ID of the HTTPService call
    from "marketData" to "MDATA" and assigning the variable marketData
    to the result of the HTTPService query, which if I understand you
    correctly should basically make everything work as it was before,
    but it seems to be a problem.
    when I try to run it puts an exclamation point on this line
    <toolbox:TreeMap id="treeMap" width="1200" height="800"
    dataProvider="{marketData}"
    labelField="@cname" weightField="@amount"
    colorFunction="{itemToColor}"
    toolTipFunction="{itemToToolTip}"/>
    That code refers to a SWC file. Apparently it wants
    marketData to be a data provider. If I change the dataProvider
    reference above to "MDATA" (the ID of the HTTPService) the App
    compiles, but I get two errors at runtime:
    TypeError: Error #1009: Cannot access a property or method of
    a null object reference.
    ReferenceError: Error #1081: Property @age1 not found on
    mx.rpc.http.mxml.HTTPService and there is no default value.
    What should I change this reference to? It won't compile if I
    use the variable I made for the e4x results and it is reading
    gibberish if I have it read directly from the
    HTTPService....?

  • Search results showing incorrect modified date

    Hi All,
    I have a one difficulty in search results.
    Document showing incorrect modified date in search results. And this happens for one document only.
    We have customized the search/results.aspx page, Our document is showing correct modified date in document properties,All Items.aspx like 31/4/2013.
    But when i search with document name in search, result showing incorrect modified date like 24/6/2004.
    I checked with database in SQL, every thing is fine.
    I have updated the Modified date through powershell script for one document and after that this recent modified date is showing in search results.
    But after updating the Modified date through powershell, issued document not showing the recent modified date in search results. still showing as 24/6/2004.
    I should not do edit property and save, to create new version.
    I don't know what is happening in search crawl. All ready full crawl running daily basis.
    I want to check whether this issued document is crawling or not. Could anybody help me to get out of this. what is the main cause of this issue.
    Thanks & Regards
    MD.Liakath ali

    Hi,
    I'm seeing the same issue after upgrading the SharePoint 2010 to SharePoint 2013.
    When I search any upgraded document in SharePoint 2013, the document's "Last Modified Date" was showing an incorrect value in Search Results page but other metadata of document like "Last Modified User" is showing the correct
    value so the problem is not with document crawl, something wrong with Last Modified Date property in Search results.
    I have seen below comment as answer but I didn't understand the solution to fix this issue for all upgraded documents.
    The most likely cause is that there is metadata on the documents that is set to that date which is overriding the other dates in the search result. SharePoint isn't particulary imaginative so it's got to be finding that date from somewhere.
    Do we have any solution for this issue? Is this issue will be addressed in SharePoint 2013 SP1?
    Note: No issues with documents, which uploaded after upgrade.

  • Not able to input data in query analyzer

    Hi buddies,
    I am working on IP.I have created a input ready query.For few values of company code there is no transaction data available,but it should show us blank so that I can atleast punch data.I am able to punch data for company codes for which transaction data is avilable .For remaining company codes for which transaction data is not availbale it is showing yellow coloured rows not allowing to input data.
    Solutions would be really appreciated.This is high priority issue.
    With regards,
    Lalitha

    Hi,
    1) if you have no transaction data, it will not show you the company codes, unless you select in your query definition "master data' instead of posted values in the query properties (for company code)
    2) yellow lines are subtotals.... To enable it input ready
    - set query to input ready in query properties
    - set row to plannable in query properties
    - very important: make sure each characteristic of your aggregation level has a unique value either in the filter definition or in the definition of your rows or columns. If not, your query will not be plannable
    D

  • Last day of each month in a year based on a Input date?

    Hi all,
    I have a request from a customer who wants to have a yearly report created in BEx Query Designer which starts in January up to December and they want to have a Month To Date (MDT) and Year to Date (YTD) calculation of a key figure. This report will only show one year at the time based on the date the user give as input at the Variable Screen.
    This key figure should be calculated by using the last date of each month for input when performing the MTD and YTD calculation and summarizations.
    Example:
    January: 31.01.2008  Key Figure = 1000. MTD = 1000 and YTD = 1000
    February: 29.02.2008  Key Figure = 2500. MTD = (2500-1000) 1500 and YTD = 2500
    March: 31.03.2008  Key Figure = 6000. MTD =(6000-2500)=3500 and YTD = 6000
    Etcu2026.
    This means that I have to have a lot of hidden Key figures which gets restricted on the different month end dates and formulas to calculate the different MTD and YTD results for the months as the year progresses.
    The way I have solved it now is that I have a Customer Exit which gives me the Last day of last year (Exp: 31.12.2007) based on input date and use a Offset on the last day of last year date to get the different last dates of each month.
    Since we have a leap year (one extra day in February) this year, the offset to calculate the end month dates will be different for 2007 and next year (2009). This solution is not very flexible, and it will not give the correct MTD and YTD if the customer wants to go back to 2007 and off course next year (2009).
    One solution is to create 12 Customer Exits that gives me the different month end dates (January-December), and also takes in account leap year for February for the different years. These Exits will be based on the Input date the Customers put in at the variable screen.
    I would rather want to avoid making 12 new customer exits and want your advice and expertise to find out if this is possible in any other way (maybe with only 1 customer exit) to get the last date of each month based on an input date.
    Thanks for all your advices on beforehand.
    Regards
    Oddmar Lid

    Hi,
    Thanks for you replay and documentation, but it doesn't give me excatly the functionality I'm after. The only MTD calculation code the document provides is the calculation of the following functionality:
    "Month to Date (MTD) u2013 From the 1st of month to u201CKey Dateu201D - for current year." This doesn't give the the functionality I want, which is to retrieve a given vaule for a Key Figure for the last dates of the months in a year to calculate MTD and YTD.
    This way I have created the query is to have multiple hidden Key Figures that calculates the MTD and YTD.
    In Columns in Query Designer it will look something like this:
    Selection: MTD January--> Date = 31.01.2008, Key Figure (Always Show)
    Selection: YTD January --> Date= 31.01.2008, Key Figure (Always Show)
    Selection: MTD February --> Date= 29.02.2008, Key Figure (Always Hide)
    Formula: MTD February --> MTD February - MTD January (Always Show)
    Selection YTD February --> Date = 29.02.2008, Key Figure (Always Show)
    And so on....
    This is off course a simplified version, but it shows the core of the solution. What I want to achive here is that the dates used to get the Key Figures (last date of a month) is calculated as flexible as possible, so that the users can go back and forth in time without worrying about the leap year problem and so on. I have now used an offset from the last date of last year and this is good for all the normal years, but when it is a leap year the query will use wrong dates to get the key figure vaule for the last date of each month.
    Any ideas on how to achieve this without creating 12 different Customer Exit variables (one for each end date of each month)?
    Thanks
    Regards
    Oddmar Lid

  • Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

    I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
    I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
    Regards
    Fawaaz

    Hi Guys,
    Thanks so much for all the prompt responses. My issue is now resolved.
    The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
    Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
    Thanks again.
    Regards
    Fawaaz

  • No batch input data for screen SAPMSSY3 0131

    Dear All,
    I have developed a report where i need to upload (old and new)incoterms,payment terms,document type  and update in the table ekko with my new values (incoterms,payment terms and document type).
    Problem :For this report i have uploaded the excel sheet and values are getting uploaded into my internal table.but when using bapi_agreement_maintain to update the ekko table ,in return table its showing No batch input data for screen SAPMSSY3 0131.
    Anyone please give the reason/solution to solve the problem.
    Regards,
    Bhavani.

    Hi,
    screen SAPMSSY3 0131 is the debugging screen so if you have any break-points in any of the transactions remove the breakpoint and check.
    Basically this BAPI is calling a transaction to execute a transaction in no dialog mode so if you have break-points in any of those program you will face this issue.
    Regards,
    Himanshu

  • Inputing dates in non-US date format

    I know this is an old issue, but I could not find it resolved in the discussions and threads had been closed:
    I cannot figure out how to input dates using my preferred format mm/dd/yy (or dd.mm.yy, or even dd.mm.yyyy) despite having set it up that way in system preferences>international (using Irish, UK, or whatever settings).
    This occurs in Address Book where I try to input Birthdays (which I want included in iCal). It appears to want to make everything the current year and month (if dd>12 which makes it confused about dd or mm) or (if dd>=12) it assumes you are entering mm/dd/yy (contrary to my settings in System Preferences). The only way I have found around this problem is to write birthdays out in "long hand" (e.g. 31 May 1935)... Oddly if you give it something like 3/2/12 it will make it 2 March 2012 (rather than 3 February 1912 as intended). Which would be unlikely to say the least...
    Definitely not the kind of problem I would expect from MacOS!
    MacBook Mac OS X (10.4.7)
    MacBook   Mac OS X (10.4.6)  

    To customize the date (and any other format) to your particular preference, go to System Preferences; select International; select Formats. In the Dates section, select Customize. A pane will appear with Show:. From here you can select Short, Medium, Long or Full.
    As an example, I use Medium for my Mail using the dd mm yy format. To make this display, you simply move (rearrange) each of the elements of the day/month/format to your particular choice. You can insert any divider between each of these elements (I use a space).
    If you prefer the truncated Julian Date (yyD) format (for specific message/signals processing), simply delete the existing elements from the format line, and drag and drop a date element from the table below the element format line. For Julian Date, I selected Year and then Day of Year (without a space). I then modified the Year format by clicking on the Year element, which then displays a white chevron to right of the numeral. Click on the white chevron and several format options are available. Click your prefered option. Repeat the same process for Day of Year element.
    When you are satisfied, click OK.

  • 'Input data length not a multiple of blocksize' error in CUP

    Hello All
    I receive the error below when trying to configure CUP. I got this error whilst trying to define the password for the RFC user created in the Connector screen in CUP. CUP doesn't accept the SAP password maintained in SU01. CUP only allows a 4 character password but SU01 is configured to only accept 8 characters. Full error message below.
    'com.virsa.ae.commons.utils.StringEncrypter$EncryptionException: Input data length not a multiple of blocksize.'
    Can anyone shed any light on this?

    Hi All,
    This issue is in Version 5.3 SP 7.1 of CUP. It occurs when we are trying to change the password for the CUP connector.
    Please note that testing the connectors within the Content Administrator --> Maintain JCO Connections screens works fine and the risk analysis from RAR also works without issue. However, whenever we attempt to enter the password for CUP connecotr setup, it returns an error saying "Action Failed" with the 'Input data length not a multiple of blocksize' error showing in the trace logs.
    We seem to be able to store a password of 4 characters e.g. 1234 but this then naturally fails the connection test.
    Can anyone suggest a parameter setting to check or a resolution for this particular issue?
    Thanks,
    Simon

  • Simple calculation using input data

    Hello,
    I know this has to be simple for most people in this forum but I have been trying to figure this out for many hours.
    Here's what I am trying to do:
    I created a numeric field that a user enters a number. I want this number to be multiplied by .475 and to appear in the same field.
    In other words how do I use the inputed data for a calculation in the same field?
    Thank you.

    Hi Howard,
    Try writing a script on the exit event of the numeric field. For example:
    1. Select the numeric field.
    2. In the Script Editor, select the exit event from the Show list. If the script editor is not opened, go to the Window menu and select Script Editor.
    3. Type the following FormCalc script:
    $ = 0.475 * $
    Where $ is the value of the current field. If you prefer working in JavaScript, change the Language type to JavaScript and type the following script instead.
    this.rawValue = 0.475 * this.rawValue;
    4. Preview the form.
    5. Type a value then exit the field.
    Regards,
    Hélène
    Adobe Systems

  • BDC - Session Method - No batch input data for screen  SAPMZ_TPSCREEN02 100

    Hi ABAP Experts,
    I have written a Dialog Program For a Screen Which contains 5 fields namely,
    carrid,
    connid,
    fldate,
    price,
    planetype.
    I have written the PAI logic to insert whatever entries entered in the fields, into Database Table SFLIGHT.
    I created a Transaction and Tested whether the entries are succesfully entetered into the Database Table and it works just fine.
    Now i planned to write a BDC program for the above Transaction so that i can upload data to the Database table from a flat file.
    I went to SHDB transaction and created a new recording and transferred the program to generate a source code.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    Then i defined an internal table which contains the same fields as those in my Screen and Transaction.
    I populated the internal table from a flat file using GUI_UPLOAD function module.
    I want to clarify - I got this flat file by using the GUI_DOWNLOAD module and later i uploaded the same file using GUI_UPLOAD.
    I tested whether the internal table is populated or not using LOOP  AT ITAB. WRITE Statements.
    Its working just fine.
    Finally my code look like this.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    I checked for errors, activated and executed.
    I gave session name and executed, it generated same number of sessions as number of records.
    I went to SM35 and Processed one of the sessions in foreground.
    It brought my screen up with all fields fill up by the fields of first record in the internal table and with
    OK Code popping up.
    I check the OK Code.
    Now the problem has come up, its says
    *No batch input data for screen SAPMZ_TPSCREEN02 1000 *
    My session was now incorrectly processed,
    Please help me to fix this problem.
    I searched so many forums and google it a lot.
    But i didn't find any clue.
    Kindly take your time and have a look at this problem and let me know how can i fix it.
    Thank you very much all.
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:57 AM

    I used this code to convert the date format. I'm still getting the short dump.
       DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date. 
    I'm once again, putting my code.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                   ITAB-CARRID.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                   ITAB-CONNID.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  V_DATE.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                   ITAB-PRICE.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  ITAB-PLANETYPE.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    Kindly take a look at it and please help me out. I tried very hard. But i dont understand why?
    Thanks
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:46 PM

  • Widget world clock shows incorrect time

    widget world clock shows incorrect time.. how can i fix this?

    There are two possibilities: (1) your computer's time is wrong. Open System Preferences, select the Date & Time tab, and either set the time manually or select a time server. If you choose the time server click on the Time Zone tab and choose your correct time zone. (2) click on the i on the World Clock widget and select a city near you (that's in the same time zone as yours.)

Maybe you are looking for