Input field validation in a Table based on the value of other column

Hi all
I have a table with 2 columns. column1 is of text view and column2 is Input field.
The user should not be allowed to enter a value in the column2 ( input field) greater than the value populated in column1(textview).
So for Eg; if the column1 is populated with value 100, The user should not be able to enter a number greater than 100 in the column2 input field.
Please let me how this can be achieved.
I appreciate the help.
Thanks

Hi,
Let me make sure u r working with table control.
First u have to create a event(VALIDATE) to do the validation.
Inside the event,
1. First get the current index where user has pointed the curson
2. Once u get the index read the internal table with index value.
3. Now u can compare the col1 and col2 values and populate the error message.
1. DATA : lo_elt TYPE REF TO if_wd_context_element,
l_index type i.
lo_elt = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
CALL METHOD LO_ELT->GET_INDEX( RECEIVING MY_INDEX = l_index.
above code should be written inside the event.
Thanks,

Similar Messages

F4 help based on the Value in other field

Hello
I have a requirement in which there are two fields say field1 and field 2 in an ALV grid (in which new data can be entered). The F4 help of field 2 should be based on the value the user enters on field1.I have checked out the BC_ALV* programs but there are no clear help .
I have tried setting the parameter id of the first field value and then get that parameter id on_f4 event of the second field.But where can i set the parameter id of the first field . on_f4 of first field does not have its value and there is no event after_f4 . There is a parameter e_afterf4 in data change event but to tirgger that there shud be some event right.
Moreover If at all i get the first field value , i can use FM F4_int_table_value_request to show the refined f4 in field 2 . But I am passing the a field symbol table in my grids set table for first display . what can i pass as parameters here to the FM F4_int_table_value_request?

hello Kallu ,
gt_f4_wa-getbefore = 'X'. --->refreshing layout before F4
gt_f4_wa-chngeafter = 'X'--> refreshing layout after f4.
see the sample code of F4...no need to pass dynpro details.....
*---locals.
data: lt_return type table of ddshretval,
         ls_return type ddshretval,
         begin of lt_kostl occurs 0,
          kokrs type kokrs,
          datbi type datbi,
          bukrs type bukrs,
          prctr type prctr,
         end of lt_kostl,
         ls_f4           type lvc_s_modi.
field-symbols: <ls_wa>         type any,
                <t_f4> type lvc_t_modi.
*---get defalut values.
refresh lt_kostl.
select kokrs
         kostl as prctr
         datbi
         bukrs
    from csks
    into corresponding fields of table lt_kostl
           where kokrs eq g_kokrs
             and datbi ge sy-datum
             and bukrs eq yfit_00049-bukrs.
*---call fm to display int values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'YFIT_00050-PRCTR'
      window_title    = 'Profit Center list'
      value_org       = 'S'
      display         = space
    tables
      value_tab       = lt_kostl
      return_tab      = lt_return
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table lt_return into ls_return
               with key fieldname = 'F0004'.
    if sy-subrc eq 0.
      assign er_event_data->m_data->* to <t_f4>.
      ls_f4-fieldname = e_fieldname.
      ls_f4-row_id    = es_row_no-row_id.
      ls_f4-value     = ls_return-fieldval.
      ls_f4-error     = space.
      ls_f4-tabix     = space.
      ls_f4-style     = space.
      ls_f4-style2    = space.
      ls_f4-style3    = space.
      ls_f4-style4    = space.
      append ls_f4 to <t_f4>.
    endif.
endif.
er_event_data->m_event_handled = 'X'.
regards
Prabhu

Setting the Link Group Name in Deep Link based on the value of a column

Using Jdeveloper 11g, Jheadstart 11g
Is it possible to override the link group name in deep linking. For example can I conditionally set that field based on the value of the item.
Regards
Edited by: aliegeh on Jul 25, 2010 8:35 AM
Edited by: aliegeh on Jul 25, 2010 8:43 AM

Thanks for the suggestion.
Here is what I am trying to do:
I have a table with one visible column that has the following entries:
1. Create
2. Modify
3. Verify
4. Approve
5. View
If the user clicks on row 1 (Create) then the link group name should be "CreateEmployees" to create new employees
If the user clicks on row 3 (Verify) then the link group name should be "MaintainEmployees" for verification and so on.
(This is role based and each role will have access to one or more of the rows in the tabler)
It basically mimics a work-flow type of scenario.
I tried to modify the template and looked at the line:
action="$JHS.facesConfigGenerator.addItemGroupLinkTaskFlowCall((${JHS.Current.item})}" but got stuck there.
Is there a way to change "JSH.current.item" in the template to read the group link name from another column say by using #if statements.
One way I also tried was to introduce a column for each action such as CreateAction, VerifyAction etc which kind of agrees with your suggestion but the drawback is the need to modify the table if another task is required.
Regards
Edited by: aliegeh on Jul 25, 2010 8:36 AM
Edited by: aliegeh on Jul 25, 2010 8:42 AM

Count of schema based on the value in a column

I have to write a query to count the number of schema that have the value in a column as '1' in a table For ex
I have a table called Vendor in all the schemas(schema1 through 50) I have to look for the value in a column(Benefits) if it 1 or 0 . I need to do the count of the number of schema who have the Benefits turned ON (value '1')
suppose the value in benefits(col) in Vendor (tbl) for schema1 is 0 than donot count that schema
and if the value in benefits(col) in Vendor (tbl) for schema2 is 1 than count
do i connect as a system manager? Do I need a Pl/sql table to put the count in it
anybody please help.
TX
KK

As I understand from 325537 description, the table VENDOR contains only one row and column BENEFITS_TRACKING is either 0 or 1
In this case the total can be calculated by simply summing the values of all BENEFITS_TRACKING
In case VENDOR has more than one row you need some grouping function like SUM or COUNT
I don't unterstand why you loop through dba_users.
Im quite sure that you won't find a VENDORS table in the SYSTEM schema. The 'execute immediate' will fail with a table not found exception.
Another problem in your code is, you will get no_data_found exception when benefits_tracking=0 because of your where condition
(remove the where-condition or use a grouping function as explained above)
declare
v_count      pls_integer := 0;
v_curr_count pls_integer := 0;
begin
for rec in (select owner from all_tables where owner like 'SCHEMA%' and table_name='VENDORS') loop
      execute immediate 'select SUM(BENEFITS_TRACKING) from '||rec.owner||'.VENDORS' into v_curr_count;
--      execute immediate 'select COUNT(BENEFITS_TRACKING) from '||rec.owner||'.VENDORS where BENEFITS_TRACKING=1' into v_curr_count;
--      execute immediate 'select BENEFITS_TRACKING from '||rec.owner||'.VENDORS' into v_curr_count;
      v_count := v_count + v_curr_count;
end loop;
dbms_output.put_line(v_count);
end;

Update a table based on Min value of a column of a Another Table.Pls Help.

Dear All,
Wishes,
Actually I need update statement some thing like below scenario...
Data in table is like below:
I wrote a query to fetch data like below ( actually scenario is each control number can have single or multiple PO under it ) (i used rank by to find parent to tree like show of data)
Table: T20
Control_no        P_no Col3
19950021     726473     00
19950036      731016     00
19950072     731990     00
                 731990 01
19950353     734732     00
                 734732 01
19950406     736189     00
             736588     01
             736588     02
             736588     03
Table : T30
Control_no      P_no              col3
19950021     726473
19950036     731016
19950072     731990
             731990
19950353     734732
              734732
19950406     736189
              736588
              736588
               736588
Now requirement is I need to update Table T30's col3 (which do have values in T20 but not this table) in such a way that , It should take MIN (COL3) from T20 and then update that value to related Col3)
Better I can explain through below new data format in T30 after update:
After update it should like:
Table : T30
Control_no       P_no    col3 (this is updated column)
19950021     726473   00 -- as this is min value for Pno 726473 belongs to Control NO 199950021 in Table T20 above
19950036     731016   00 -- as this is min value for Pno 726473 belongs to Control NO 199950021 in Table T20 above
19950072     731990   00 -- see here..both Pno should updated as '00' as MIN value col3 in Table T20 related to this
             731990      00     record is '00' (out of 00,01 it should select 00 and update that value here)
19950353     734732      00 -- same again both Pno should updated as '00' as MIN value col3 in TableT20 related to this
             734732      00     record is '00' (out of 00,01 it should select 00 and update that value here)
19950406     736189      00 -- As there is single col3 value in T20, 00 should be updated here.
             736588      01 -- Here it should update col3 as '01' since for this pno(736588)
             736588      01 -- Here too it should update col3 as 01 per requirement ,minimum value of this pno in T20
             736588      01 --     same here too.. Sorry if my post formatting is not good...
Hope i am clear in my requirement..(update T30 col3 based on min value of col3 of related records)
Please suggest some update sql for this...(ideas would be great)
I am using oracle 10 g version soon will be migrated to 11g..
Regards
Prasanth
Edited by: Onenessboy on Oct 20, 2010 12:13 PM
Edited by: Onenessboy on Oct 20, 2010 12:15 PM

Onenessboy wrote:
I am really sorry, my post so nonsense in look..
I used to use for actuall code..
the out put i tryped, i used [pre] , [/pre] but still does not look good..
hmm..thanks for your suggestion hoek..
so any ideas about my requirement...I would suggest spending a bit more time trying hoek's suggestion regarding {noformat}{noformat} tags instead of repeatedly asking for more help.
Because to understand your requirement, people are going to have to read it first.

How to split data into tables based on the entries in a column?

My problem is very similar to this thread: how to link data from one numbers sheet to another sheet, however I could get it to work the way described there. I have one big table for entering data (the first one). I would like to have a few other tables populated automatically based on the entries in one of the columns of the first table. In my example below I put everything in one sheet for clarity. The selection to the other tables is to be done on the column "fruit" in the first table. (second one is "oranges", then "apples" and then "pears" -- had to cut the width of my screenshot due to the limitations of Apple's forums).
Here is what it would look like, just cannot figure out how to make it happen automatically.
Tried also importing similar Excel example to Numbers, but the import did not work correctly.
Any help will be appreciated.
LD

Larry,
Here's an approach that I've used...
In the Purchases table, Aux column, the expression is:
=COUNTIF($A$1:A2, A) & "-"&A
Fill Down
This expression builds a string that identifies the item and the ocurrance of that item.
The Date column of the Summary tables, cell a3, contains:
=IF(ROW()-3<COUNTIF(Purchases :: $A,$A$1), LOOKUP(ROW()-2&"-"&$A$1, Purchases :: $F, Purchases :: B), "")
Fill Across, then fill down.
Regards,
Jerry

Joining 3 tables based on the Value from 1 Table

Dear Oracle Guru's
I have a Table called Resourcemaster , which stores the details of Resources for the project , The Resources can be of 2 types either our own employees as well as Hired Developers from other consultancies. The following is the proposed Resourcemaster table structure
Resourcemaster
Project_id
Resource_ID
Resource_type (E - Employees /H - Hired)
Resource_code
Employeemaster
Emp_code
Emp_Name
Emp_address
Hiredresourcemaster
Hired_code
Hired_Name
Hired_Address
I need to query the resourcemaster , my result should be containing Project id, resource id , Resource type, Resource Name and Resource Address. for which the details are in the above 3 tables . How these 3 tables can be joined and the join is based on the condition, if the resource type is E then resource code = Emp_code from employee master or if the resource type is H then resource_code = Hired_code.
I am not clear how to join them in a single query and i got stuck
Kindly Clarify me
With Warm Regards
ssr

ssr wrote:
I have a Table called Resourcemaster , which stores the details of Resources for the project,So this table should really be called PROJECT_RESOURCES :-)
The Resources can be of 2 types either our own employees as well as Hired Developers from other consultancies. So you have a table called RESOURCES (id [PK], code [UK?], name, address, resource_type [E or H])
And the PROJECT_RESOURCES table is this: (project_id [FK to PROJECTS], resource_id [FK to RESOURCES])
And by modelling your data like this, you'll also find that querying because much easier.
Hope this helps.
Regards,
Rob.

Get Row reference in advanced table to set the value of custom column

Hi,
I have a requirement to add a new column PHP Amount in Manage Charge page which is a entry page where all the charges are entered for a PO. This region is based on Advanced table.
As per requirement, Newly created column should populate the value of the existing column (Amount) or vice verse i.e. value entered in amount column should be set to PHP Amount column for a particular row. and the value entered in PHP amount should be stored in the custom table.
I have added the column via personalization and setting the view attribute in extended controller as this column is not the part of the database table on which the VO is based upon. Also added a PPR event in process request function in controller. And getting the reference of the row in processForm Request's PPR event and invoking the method defined in my custom AM for getting and setting the columns values . Here i can't extend the root AM as the Page have LOV columns so i have created my custom AM and adding it dynamically in controller.
Here is the complete code
Controller Code
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
           super.processRequest(oapagecontext, oawebbean);
           OAApplicationModule rootAm = oapagecontext.getApplicationModule(oawebbean);
            OAApplicationModule nam = (OAApplicationModule)rootAm.findApplicationModule("XXIPCShipmentAMEx");
             if (nam == null)
                 nam = (OAApplicationModule)rootAm.createApplicationModule("XXIPCShipmentAMEx", "xxipc.oracle.apps.inl.workbench.server.XXIPCShipmentAMEx");
           OAAdvancedTableBean tableBean =(OAAdvancedTableBean)oawebbean.findIndexedChildRecursive("ChargeLinesAdvTable");
           OAMessageTextInputBean phpAmt =(OAMessageTextInputBean)tableBean.findIndexedChildRecursive("XXIPC_PHP_AMOUNT");
           OAViewObject ChargeLinesVO1 = (OAViewObject)rootAm.findViewObject("ChargeLinesVO1");
            phpAmt.setViewUsageName("ChargeLinesVO1");
            if (ChargeLinesVO1 != null)
                try
                  String l_att= ChargeLinesVO1.findAttributeDef("PHPAmt").toString();
                 catch(Exception exception)
                  ChargeLinesVO1.addDynamicAttribute("PHPAmt"); //Adding ViewAttribute to VO
            ChargeLinesVO1.reset();
            phpAmt.setViewAttributeName("PHPAmt");
           FirePartialAction FireActionA = new oracle.cabo.ui.action.FirePartialAction();
           FireActionA.setEvent("PPR");
           FireActionA.setUnvalidated(false);
           phpAmt.setPrimaryClientAction(FireActionA);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
            super.processFormRequest(oapagecontext, oawebbean);
            OAApplicationModule rootAm = oapagecontext.getApplicationModule(oawebbean);
            OAApplicationModule nam = (OAApplicationModule)rootAm.findApplicationModule("XXIPCShipmentAMEx");
            OAAdvancedTableBean tableBean =(OAAdvancedTableBean)oawebbean.findIndexedChildRecursive("ChargeLinesAdvTable");
            OAMessageTextInputBean Amt =(OAMessageTextInputBean)tableBean.findIndexedChildRecursive("Amount");
            OAViewObject ChargeLinesVO1 = (OAViewObject)rootAm.findViewObject("ChargeLinesVO1");
            String rowRef = oapagecontext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
            Serializable[] param ={rowRef};
          // IF PPR event bind with PHPAmount column is triggered
            if("PPR".equals(oapagecontext.getParameter("event")))
                    nam.invokeMethod("PHPAmtPPRAction",param);
          // IF changeChargeAmt event(Standard Event ) bind with Amount column is triggered
           if("changeChargeAmt".equals(oapagecontext.getParameter("event")))
              nam.invokeMethod("changeChargeAmtPPRAction",param);
Custom AM Code
public void PHPAmtPPRAction(String rowRef)
          OARow row = null;
          if (rowRef != null )
               row=(OARow)findRowByRef(rowRef);
               if(row != null)
                  Number phpAmt =(Number)row.getAttribute("PHPAmt");
                   if(phpAmt != null)
                          row.setAttribute("ChargeAmt", phpAmt);
public void changeChargeAmtPPRAction(String rowRef)
        OARow row = null;
          if (rowRef != null )
             row=(OARow)findRowByRef(rowRef);
             if(row != null)
                 Number chargeAmt =(Number)row.getAttribute("ChargeAmt");
                 if(chargeAmt != null)
                         row.setAttribute("PHPAmt", chargeAmt );
I m not able to set the PHP Amount column value entered in Amount column. But i am able to set the Amount column value to PHP amount column.
I m not getting the Row Reference in case PPR event triggered in PHP Amount column . It is giving Null reference in case of PHP Amount.
I don't know what i m missing ..Can anyone help me here..
Thanks in advance
Renu

but using second way you will not be able to save those record in database, to save in database you have to override setter method also
Code will be like this -
    public String getBillRemarks() {
       return getSuppNmTrans(); // This is first Column Value
       // return (String) getAttributeInternal(BILLREMARKS);    }
    public void setBillRemarks(String value) {
       //Setting First Column Value in Second
       setAttributeInternal(BILLREMARKS, getSuppNmTrans());
But i suggest you to use valueChangeListener on first field to set value in second one
Ashish

How to get the total number of occurrences based on the value of a column.

Hello everyone,
This is the first time that I will ask question here on your forum but has been following several threads ever since. I guess that now is my turn to ask a question. So anyway here is the thing, I have a query that should return count the number of rows depending on the value of SLOT. Something like this:
WIPDATAVALUE          SLOT             N            M
1-2                   TRALTEST43S1     1            3
1-2                   TRALTEST43S1     2            3
3                     TRALTEST43S1     3            3
4-6                   TRALTEST43S2     1            4
4-6                   TRALTEST43S2     2            4
4-6                   TRALTEST43S2     3            4
7                     TRALTEST43S2     4            4-----
As you can see above, on the SLOT TRALTEST43S1, there are three occurrences so M (Total number of occurrences) should be three and that column N should count it. Same goes with the SLOT TRALTEST43S2. This is the query that I have so far:
SELECT DISTINCT
WIPDATAVALUE, SLOT
, LEVEL AS n
, m
FROM
SELECT
    WIPDATAVALUE
    , SLOT
    , (dulo - una) + 1 AS m
FROM
    SELECT
      WIPDATAVALUE
      , SLOT
      , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, 1, INSTR(wipdatavalue, '-')-1) END AS una
      , CASE WHEN INSTR(wipdatavalue, '-') = 0 THEN wipdatavalue ELSE SUBSTR(wipdatavalue, INSTR(wipdatavalue, '-') + 1) END AS dulo
    FROM trprinting
    WHERE (containername = :lotID OR SLOT= :lotID) AND WIPDATAVALUE LIKE :wip
) CONNECT BY LEVEL <= m
ORDER BY wipdatavalue;And that it results to something like this:
WIPDATAVALUE          SLOT             N            M
1-2                   TRALTEST43S1     1            2
1-2                   TRALTEST43S1     2            2
3                     TRALTEST43S1     1            1
4-6                   TRALTEST43S2     1            3
4-6                   TRALTEST43S2     2            3
4-6                   TRALTEST43S2     3            3
7                     TRALTEST43S2     1            1-----
I think that my current query is basing its M and N results on WIPDATAVALUE and not the SLOT that is why I get the wrong output. I have also tried to use the WITH Statement and it works well but unfortunately, our system cant accept subquery factoring.
I know you guys will be helping out because you are all awesome. Thanks everyone
Edited by: 1001275 on Apr 19, 2013 8:07 PM
Edited by: 1001275 on Apr 19, 2013 8:18 PM

Hi,
Sorry, it's still not clear what you want.
Are you saying that, given this table:
CREATE TABLE trprinting
WIPDATAVALUE       VARCHAR2(255)
, SLOT               VARCHAR2(255)
INSERT INTO trprinting (wipdatavalue, slot) VALUES ('1-2', 'TRALTEST43S1');
INSERT INTO trprinting (wipdatavalue, slot) VALUES ('3',    'TRALTEST43S1');
INSERT INTO trprinting (wipdatavalue, slot) VALUES ('4-6', 'TRALTEST43S2');
INSERT INTO trprinting (wipdatavalue, slot) VALUES ('7',    'TRALTEST43S2');you want to produce this output:
WIPDATAVALUE SLOT                     N          M
1-2          TRALTEST43S1             1          3
1-2          TRALTEST43S1             2          3
3            TRALTEST43S1             3          3
4-6          TRALTEST43S2             1          4
4-6          TRALTEST43S2             2          4
4-6          TRALTEST43S2             3          4
7            TRALTEST43S2             4          4? If so, here's one way:
WITH     got_numbers     AS
     SELECT     wipdatavalue
     ,     slot
     ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                           , 1
                       , INSTR ( wipdatavalue || '-'
                            ) - 1
                 )          AS low_number
     ,     TO_NUMBER ( SUBSTR ( wipdatavalue
                           , 1 + INSTR ( wipdatavalue
                 )          AS high_number
     FROM     trprinting
SELECT       wipdatavalue
,       slot
,       ROW_NUMBER () OVER ( PARTITION BY slot
                             ORDER BY          low_number
                    )                    AS n
,       COUNT (*)     OVER ( PARTITION BY slot )     AS m
FROM       got_numbers
CONNECT BY     LEVEL               <= high_number + 1 - low_number
     AND     low_number          = PRIOR low_number
     AND     PRIOR SYS_GUID ()      IS NOT NULL
ORDER BY low_number
,            n
;Much of the complexity here is caused by storing 2 numbers in 1 VARCHAR2 column, wipdatavalue. Relational databases work best when there is no more than 1 item in any given column of any given row. This is so basic to datbase design that it is called First Normal Form. Also, numbers belong in NUMBER columns, not VARCHAR2. If you stored your data like that in the fist place, then you wouldn't need the sub-query I called got_numbers, which is about 60% of the code above. (That could be reduced by replacing SUSTR and INSTR with the less efficient REGEGP_SUBSTR.)

Create a new column in a table that compares the value of one column with its previous value

The DDL:
DECLARE
@T TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
DECLARE
@K TABLE
IDNO
int,
name
varchar(40),
[Date]
datetime2,
Price1
float,
Price2
float
INSERT
INTO @T
VALUES(22,'C_V_Harris','2014-01-02 10:23:49.0000000',
23.335,
23.347)
INSERT
INTO @T
VALUES(21,'C_V_Harris','2014-01-02 10:05:13.0000000',
23.357,
23.369)
INSERT
INTO @T
VALUES(20,'C_V_Harris','2014-01-02 09:56:15.0000000',
23.364,
23.377)
INSERT
INTO @T
VALUES(19,'C_V_Harris','2014-01-02 09:45:26.0000000',
23.351,
23.367)
INSERT
INTO @T
VALUES(18,'C_V_Harris','2014-01-02 09:43:20.0000000',
23.380,
23.396)
INSERT
INTO @T
VALUES(17,'C_V_Harris','2014-01-02 09:34:28.0000000',
23.455,
23.468)
INSERT
INTO @T
VALUES(16,'C_V_Harris','2014-01-02 09:30:37.0000000',
23.474,
23.486)
INSERT
INTO @T
VALUES(15,'C_V_Harris','2014-01-02 09:18:12.0000000',
23.419,
23.431)
INSERT
INTO @T
VALUES(14,'C_V_Harris','2014-01-02 09:16:06.0000000',
23.360,
23.374)
INSERT
INTO @K
SELECT
ROW_NUMBER()
OVER (ORDER
by IDNO)
AS RN,*
FROM
@T
SELECT
* FROM
@K
--not working:
SELECT
a.RN,a.Price2
FROM
@K a
INNER
JOIN @K
b
ON
a.RN=b.RN-1
WHERE
a.Price2>b.Price2
I need to create a view with a column (say 'Comp' below) that compares the value of each row in Price2 with the previous Price2 row, and it is greater then +1, the
same 0, and less -1.
The processed table should be:
IDNO
name
Date
Price1
Price2
Comp
22
C_V_Harris
1/2/2014 10:23:49
23.335
23.347
0
21
C_V_Harris
1/2/2014 10:05:13
23.357
23.369
1
20
C_V_Harris
1/2/2014 9:56:15
23.364
23.377
1
19
C_V_Harris
1/2/2014 9:45:26
23.351
23.367
-1
18
C_V_Harris
1/2/2014 9:43:20
23.38
23.396
1
17
C_V_Harris
1/2/2014 9:34:28
23.455
23.468
1
16
C_V_Harris
1/2/2014 9:30:37
23.474
23.486
1
15
C_V_Harris
1/2/2014 9:18:12
23.419
23.431
-1
14
C_V_Harris
1/2/2014 9:16:06
23.36
23.374
-1
How can I structure the statement to get (the most recent - order by date ) result for Comp?

Satheesh Variath, I just had to make some corrections from your script to get the correct answer:
CREATE
VIEW vw_Comp
AS
SELECT
TOP 1 t.IDNO,t.name,t.[Date],t.Price1,t.Price2,
CASE
WHEN t.Price2
> LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNO)
THEN 1
WHEN t.Price2
< LAG(Price2,1)
OVER (PARTITION
BY name
ORDER BY IDNo)
THEN -1
ELSE 0
END
AS Comp
FROM
@T t
ORDER
BY DATE
DESC
The adjustments: the selection of the most recent comparison (Top 1) and the use of the function LAG (instead of LEAD) to get the previous value of the column.

Calling multiple sub-reports based on the values in a column in the main report

All,
Say, I have a main report with 4 parameters and 8 columns in it's tablix, there is 1 column in this main report that can have 3 values, say A,B,C. If the user clicks on "A", he will be directed to Subreport A, clicks on "B", he will be
directed to Subreport B and if he clicks on "C", then he'll be taken to Subreport C. All works fine when I call subreport A and B from that column, because both of them have the 4 parameters that we can map back to the parameters of the main report
in the "Go To Report" section.
Now, for Subreport C, I'll need to map all those 4 parameters + I will also need to map the parameters in my Subreport C to the FIELDS in the main report. Subreport C has 8 parameters, so 4 of them get mapped to the parameters of the main report and
the other 4 get mapped to the fields in the main report.
Now, when I call the Subreport C from my main report, that runs fine, but, I get an error when I try to call my other subreports A and B. The error says "Parameters in the subreport are not defined", probably because it tries to map the fields
in the main report to the non-existing parameters in mu Subreport A and B.
Any ideas/suggestions/workarounds would help a lot. Also, if someone can point me to a link where multiple subreports are being called from the column of a main report would be a great help too.

One simple solution would be to add the additional 4 parameters to subreports A and B. Just don't use them.
I assume you are calling the subrebort using Go to report action property of the tablix cell control. Try switching to Go to URL. Then use expression builder to dynamically create your url:
="http://YourReportServer/Reports/Pages/Reports.aspx?ItemPath=%2fYour%2fReport%2fPath%2fReport"+Fields!Column1.Value+"&Parameter1Name="+Parameters!Param1.Value+"&Parameter2Name="+Parameters!Param2.Value+"&Parameter3Name="+Parameters!Param3.Value+"&Parameter4Name="+Parameters!Param4.Value+IIf(Fields!Column1.Value="C","&Param5="+Fields!F1.Value+""&Param6="+Fields!F2.Value+""&Param7="+Fields!F3.Value+""&Param8="+Fields!F41.Value,"")
Now this is a rather long formula which is why I prefer just adding the other 4 parameters to all of the subreports but this expression opens the report from the url and only when Column1 field is "C" does it also pass the additional 4 parameters.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How can I select and delete rows based on the value in one column?

I searched through the discussion board, and found a thread on deleting blank rows, but not sure how to modify it to work with my issue.
I have put together a rather complicated spreadsheet for designing control systems, it calculates parts needed based on check boxes selected in a second spreadsheet.
Since not all systems require all parts there are many rows that have a 0 quantity value, I would like to select these rows and delete them once I have gone through the design phase (checking off required features on a separate sheet).
I like the way the other thread I found will gather all the blank rows at the bottom without changing the order of the rows with data in them.
I don't understand exactly how the formula in the other thread works well enough to modify it to look for a certain column.
I hope I made myself clear enough here, to recap, I would like to sort the rows based on a zero value in one (quantity) column, move them (the zero quantity rows) to the bottom of the sheet, and then delete the rows with a zero quantity (I can delete them manually, but would like to automate the sorting part).
Thanks for any help anyone can provide here.
Danny

I apologize but, as far as I know, Numbers wasn't designed by Ian Flemming.
There is no "this column will be auto-destructing after two minutes"
You will have to use your fingers to delete it.
I wish to add a last comment :
if your boss has the bad habit to look over your shoulder, it's time to find an other one.
As I am really pig headed, it's what I did. I became my own boss so nobody looked over my shoulder.
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 20:30:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Conditionally Formatting One Column Based On The Value of Another Column

I have the following requirement:
I have 2 columns in a report showing Actual Sales & Budget Sales each year. I am using a bar chart to show the different values for these 2 columns.
I need to conditionally format the column "Actual Sales" so that if it is less than the "Budget Sales" it will appear in red, and green if "Actual Sales" is greater than "Budget Sales." So in a nutshell,
CASE WHEN "Actual Sales" < "Budget Sales" THEN
RED
ELSE
GREEN
END
Thoughts anyone?

CASE WHEN (COL1 - COL2) < 0 then Red else Green end
regards
John
http://obiee101.blogspot.com

Problem in the code to update a column value based on the value of a column

Merge into item_TMP S using items I on (S.ITL_ITEM= I.ITEM_ITEM)
when matched then
update set
S.ITL_UOM = I.ITEM_UOM;
when not matched then null;

Try
update Item_TMP set ITL_UOM = (select ITEM_UOM from ITEMS
                                                 where Item_TMP_TMP.ITL_ITEM = ITEMS.ITEM_ITEM
                                                  and items.ITEM_UOM is not null )
where ITL_ITEM in   (select ITEMS.ITEM_ITEM from ITEMS
                                                 where items.ITEM_UOM is not null )
/Cheers, APC
blog: http://radiofreetooting.blogspot.com

To modify a field in a database table based record identification by primar

hi
i want to to modify a field in a database table based record identification by primary key filed and two more fields
ie customer (primary key
i want to modify record from intenal table the record existing with primary key field customer
the status field needs to be mofied as " value rolled"
the below code is happening
loop at it_record into wa_Record
wa_inv-customer (primary key) = wa_Record=custome
wa_inv-date = wa_Record-date
...so one
append wa_inv to it_invest
clear wa_inv
endloop.
if not it_invest is initial
modify TABle1 ( this table is data base table which needs to be mofified) based on the primary key field
and also date field and status field which is not primary key.
regards
arora

Hi there.
Your requirement is to update a Z Database table from your internal table, right? You have several options:
LOOP AT it_invest INTO wa_inv.
UPDATE dbtable
     SET date = wa_inv-date
   WHERE prim_key = wa_inv-prim_key
     AND any_field = wa_inv-any_field.
ENDLOOP.
or
LOOP AT it_invest INTO wa_inv.
UPDATE dbtable FROM wa_inv. "if wa_inv of same type of dbtable
ENDLOOP.
In the first example, I wrote any field because you can update dbase table, filtering for fields that don't belong to the primary key. However, remember that you will change all records that respect the key you used (so, in your case, use the primary key).
Regards.
Valter Oliveira.

Input field validation in a Table based on the value of other column

Similar Messages

Maybe you are looking for