Input Help values

Hi friends
Is there any FM to get the input Help values ( fixed , check table values, search help values ) if i specify the field.

DATA : BEGIN OF itab OCCURS 0,
         matnr LIKE mara-matnr,
       END OF itab.
parameter : p_matnr like mara-matnr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
itab-matnr = 'VAMSI1'.
APPEND itab.
itab-matnr = 'VAMSI2'.
APPEND itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield               = 'MATNR'
     dynpprog               = 'Y_VAMSI'
     dynpnr                 = '1000'
     dynprofield            = 'P_MATNR'
     value_org              = 'S'
    TABLES
      value_tab              = itab
   EXCEPTIONS
     parameter_error        = 1
     no_values_found        = 2
     OTHERS                 = 3
You need to use the fm the above said way. If you want more than one field to be displayed declare as many fields in the internal table as you need.
If you want to use for SELECT-OPTIONS, you need to assign S_MATNR-LOW or HIGH to dynprofield.
Vamsi

Similar Messages

BEx Input Help Values Restricted

Dear Gurus,
    In our project, we navigate the attribute "0SALESORG" of "0PLANT" and use it on the report. In Sales Transactions, there is another 0SALESORG in our multiprovider. The problem occurs when I set 0SALESORG and 0PLANT as BEx variable input. When I select one sales org, the input help values of plant are restricted corresponding to the sales org. Below are the steps.
   1) If I input Sales Org = 7081, the possible values of plants are restrcted to "NU01" which is under sales org 7081 only.
    2) If I do not input any Sales Org, all the possible values of plants are displayed (such as LK11, LJ11,etc).
      If I input only Plant = LJ11, LK11, there are transactions with Sales Org 7081 and Plant = LJ11, LK11 in the infocube as below picture.
What I want is I want to input Sales Org 7081 and then further input plant LJ11, LK11. (However, when I input Sales Org 7081, only the plant NU01 is available on the Search Help screen.)

In our business scenario, 1 sales org can pick and sell materials from plants of other sales organization. As in the last screen, sales org 7081 can sell material from plants LJ11 (under sales org 6451) and plant LK11 (under sales org 6461).
However, with the restriction, I can't input the sales org 7081 and then input plant LJ11 or LK11. It just shows plant NU01 (under sales org 7081)
By the way, the variables I currently used are on 0SALESORG (not Attibute) and 0PLANT already

Cannot see the default input help values in the preview mode ALDesigner P&F

Hi experts,
I'm currently implementing a HCM PROCESS FORM process.
I'm wondering why I'm not able to see the default input help of a dropdown UI ISR element in the Preview mode within adobe live cycle designer.
I have linked my field with SAP-PA backend-service through Form Scenario.
Within adobe live cycle designer, in the Binding tab page and then Element Values, I entered the following value in the Objects field: $record.sap-vhlist.<Field
name>\.DATA\.FIELD.item[*], whereby <Field name> is the name of the form field. but cannot see any values...?
Could you provide me any help, advices on that.
Thanks in advance,
Regards
Louis

Hi
You can do that in two ways.
One is from PA services provided by SAP. Other one is you care create a Generic service to load the values.
1. In HRASR_DT tcode select the process and create the backend service for SAP_PA and add the field Employee group (PERSG ) by choosing IT 0001 and screen element then select the Input Help and check the box for PA service .
2. Create a backend service and create the BADI and inside that do the logic to load the Employee group from FM and bind the value to the field.
Please refer the Enhancement Implementation HRASR00_USER_NAME for the sample. Class CL_HRASR00_GS_USER_NAME.
see this link
http://help.sap.com/saphelp_erp2005/helpdata/en/82/b6b94278560c31e10000000a1550b0/frameset.htm
Kind Regards,
Mukesh

Variables/Input Parameters Value help not showing texts

Hello,
I have created a crystal report based on a calculation view in Crystal Reports for Enterprise 4.1 SP5, which has a input parameter on the field "Region". For the value help, I am using a custom view based on T005U in which I have made sure that RegionName field is present in the "Label Column" property of the Region field.(Required for viewing descriptions of LOVs).
In the crystal report, while previewing data in the query builder, I am able to see the value help for the input parameter in the prompt screen, which displays only the key part, but does not display the description of it. Moreover, after accepting the prompt value, the preview runs into an error(as shown below). Please note that I get the error below only when Region is a part of the output fields of the query.
Instead of input parameter, when I create a variable on the region field in the main calculation view, with the same value help view, I am able to do data preview in the query builder as also data appears in the report on running the query. But, just as in the case of input parameter value help in the prompt screen, even over here, I am only able to see the key part and not the description.
Are variables/input parameter LOV's supposed to display descriptions or just the key part? As also, any reason why I should be getting this error while using Input parameter?
Kindly let me know if I am missing something in the development of this report.
Regards,
Alston

Hi,
I hope you are taking the BEx Query as a source to the crystal report. In the BEx query check region info object should is maintained as Text and Key. If text is not maintained over there you will not be getting text in Crystal reports.
Krishna.

How to hide values in F4 input help

Hi firends,
I have a requirement to hide the values from F4 input help. In tcode F110, when I press F4 in Identification field then i will get the F4 help value for identification for which payment run is already done. I want to hide that data in F4 help and i don't want to delete it from table. Is it possible??
Please help me.
Thanks,
Ziad

Hi,
Please check this [Thread for your help.|Re: Regading OVS]
You can check also [This thread.|Re: Hide F4 personal value list;
Thanks,
Abhijit

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

Sort values in input help for variables

Hi there,
Users often get annoyed by the input help in our web-reports. As the data in the InfoProvider grows, the variable values in the input help screens gets over-populated.
Often old values (eg. 0CALMONTH) are displayed first and users have to scroll trough 8 blocks of values before they get the value they are looking for.
It is kind of a practical issue, but does any of you know how to <b>sort</b> the values in the input help screen?
Kind regards,
Hans de Klein

Hi Hans,
I can suggest you one way but i am not sure it will work in your scenario.
Where ever you have used variables. Lets say 0CALMONTH.
You must have restricted this with some variable.
Goto The Property of 0CALMONTH(By right clicking) and check the sort property.Also select you want to sort on Key/Text.
Hope it helps.
Regards,
Parth.

How to restrict user's inputs to F4 help Values?

Hi Experts,
I have created a custom infotype where i have a custom search help created for one of the fields, the problem is that even if i give values other than the values in the search help the infotype doesnt throw any error and gets saved.
So can anybody explain how to restrict the field only to search help values.
Thanks,
Revanth.

Hai.
Check the example it may help you.
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Regards.
Sowjanya.b.

F4 input help on Variable screen is not working on Portal

Dear Experts,
We are facing one issue when we run the WAD report on portal, variable screen gets hang after clicking on input help button (F4) for couple of variables. We are facing same issues when we run the base queries on portal. But when we run the same base queries in RSRT (Tcode) or in BEx Analyzer we are not facing this issue and able to get the input help screen with values.
I also have gone through some old posts related to such issues but didn't help much. We are already on SAP BW 7.4 SP Level 008 and for Char IO Query Filter Value setting is kept as "Values in Master Data Table" only. This is a MD IO with Compounding.
Kindly let me know if anyone has faced such issue.
Thanks in Advance,
Nilesh

Dear Martin,
There is a no long running work process in the backend and data volume is more in Master Data Table, there are around 19 Lacks records available.
For BI Java patch and defaultTrace for errors I will check it with BASIS Admin team. Unfortunately I don’t have rights to do same.
Thanks,
Nilesh

Bind input field value to a variable fails

Business need : The user wants to re-evaluate lines by a percentage value which he fills via his BI-IP screen.
I created an INPUT FIELD in WAD and I am trying to link a variable value (initially created in BI-IP through transaction RSPLAN)
to this INPUT FIELD.
Whenever I fill the input field with a value, the value is not being transferred to the variable.
Please help how to bind an INPUT field value to a variable to be transmitted to a planning function.
I have made many trials but in vain.
Please help.

Hi.
I will present my scenario (it works in my system). From this scenario you may "cut" implementation for your scenario.
Lets sat I have an input fileld item and I want to read value (in my case numeric value) and pass this value to any planning sequence.
1. Create in Bex variable (in my case it is formula variable) lets say Z_INPUT_VAR
2. In WAD, when you executin planning sequence (lets say by pressing button execute) in command EXEC_PLANNING_SEQUENCE_SIMPLE define data binding.
When you clicked data binding->variable input MANUALY your variable name (Z_INPUT_VAR) in popup window.
3. In variable type select (ITEM_INPUT) type
4. In web item select your input field item.
This way you will pass inputed value to vaariable and planning sequence.
Then in planning function you also may use VARV() to read value of Z_INPUT_VAR variable.
Regards.

I defaulted input help field (pick list) but SAP CRM still asking for one

We are running SAP CRM 7.0.
Some fields as you know are dialog / pick list fields.
What I mean by this is they are input help fields where you
can click a little square (in sap crm 7.0) to the right of the text box
and it brings up a dialog screen of values that you can select from.
Here is an example screen shot of what I am talking about:
http://img834.imageshack.us/img834/5676/imageschak.png
So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
The code is like so:
method GET_CURRENCY.
CALL METHOD SUPER->GET_CURRENCY
EXPORTING
    ATTRIBUTE_PATH = attribute_path
   ITERATOR       = iterator
RECEIVING
    VALUE          = value.
      if value eq ''.
        IF sy-langu EQ 'E'.
          VALUE = 'USD'.
        elseif sy-langu EQ 'D'.
          VALUE = 'EUR'.
        ENDIF.
      endif.
endmethod.
Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
The method works great it sets the default of the currency to say USD. When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency! But why is this happening a currency already exists? So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
The question is why does this happen? I need it so that the default currency value is recognized by the SAP CRM system. Why do I have to go back in and re-select the currency if it is already set? Is there some sort of consistency check or something I need to do to eliminate this problem?
Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
http://img832.imageshack.us/img832/3011/enteracurrency.png
Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away. Why does this happen ?

I called SET_CURRENCY right after setting my value and the error is now gone.
SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
                iterator = iterator
                value = value ).
Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/

Passing parameter to an Input Help Component

Hi ,
Someone knows a way to pass parameters or any value to an Input Help Component that is built in a separate WDP application ?
Thanks in advance for your help.

Hi Baskaran,
I have a WDP component that implements "".
Then, i use it as search help (F4 function) for an input field in another WDP component.
I would like to use the same " search help component " for many input fields.
In this purpose, I would like to pass a parameter to specify the caller input field.
So, do you know a way to pass parameters to "the search help component" ?
Here is the tutorial that i followed, for the first part.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true ]
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50fd6096-a4b6-2d10-bfa8-bbd9001e0d0e?quicklink=index&overridelayout=true

To Display Input Field Value in Pop Up

hii guys i want to display a input field value in a pop up dialog box.
For this i have taken a input field, a pop up component and a button.
In the dialog box of pop up element i have taken an output text which will display the value of input field.
Everything seems to be work fine if i am giving the value to input filed at design time.
But when i want to display the input field value entered at run time, the dialog box of pop up displays nothing..!!!

Thank you so much Arun for your help.
I did as you told me to do.
But somehow i think i am not getting it right.
I created a private String variable named value in my Bean Class and then i created its accessors..
setValue and getValue..
Then i set the value property of both input text and output text as #{package.BeanClass.value},
but its not working...!!!
Can you help me out with problem..!!

Input help for a selection screen field

I have a selection screen with field species and checkoff activity .
For a given species('sc','sb' or 'ss') , the input values allowed for the
check off activity must be 'SCCK' for species 'SC' ,'SBCK' for species 'SB' and so on.
I need to provide input help for check off activity based on the value of the species.How do i do that?

PARAMETER : p_val(10) TYPE c ,
p_val2(10) TYPE c.
AT SELECTION-SCREEN on p_val.
IF p_val = 'SC'.
p_val2 = 'SCCK'.
ENDIF.

Standard input help in zreport selection screen

Hi All,
   I am having a selection sceen like S_PERNR FOR PA0001-PERNR.
   when I put f4 help then it is comming right and showing the value
of personnel number which is correct.
   But when you execute the transaction PA30 and select f4 help in
personnel number then it iscomming with window and all information
is cooming. I want to put that help on my selection screnn S_PERNR FOR PA0001-PERNR.
is it possible? Please give me the solution.
Thanks,
Rakesh

Yes, i am getting input help for position in that program also in ECC 6.0 version.
SELECT-OPTIONS:pchobjid FOR pchdy-objid_seq.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-high.
rhx-f4-objid-high pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
Which version are you working ?
Note: Plz post only one question per thread.

Input Help values

Similar Messages

Maybe you are looking for