Input sream does not read the entire dat

when i read the response from the socket connection, it reads only the part of the response.
iS=soc.getInputStream();
BufferedInputStream bufIn = new BufferedInputStream(iS);
BufferedReader inp = new BufferedReader(new InputStreamReader(bufIn));
char[] res=new char[32000];
inp.read(res,0,res.length);
why it reads only a part of the response?

Use readFully() from DataInputStream (this will read bytes, so you'll have to convert that to what you need) or manually force it to read the whole thing (if the array is not full, force the reading of the remaining part)...

Similar Messages

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

N81 does not retain the correct date...

My N81 got a very strange problem: it does not retain the correct date....
Usually it's wrong by two days ago....!
The S.O. Ver. is: 10.0.32
Thanks you and sorry for my english...! :-)

hi there, have you checked that there is a firmware update for your model? v10 sounds like the original firmware for the N81. i would suggest checking on your PC via Nokia Software Updater for any firmware updates. the latest firmware version for the N81, unbranded or not, is v21.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

Where and how do I fix this?
We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
- Install and launch your app
- Go to Settings > iCloud > Storage & Backup > Manage Storage
- If necessary, tap "Show all apps"
- Check your app's storage
The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
More info here:
http://forums.adobe.com/message/4730637#4730637

OC4J: marshalling does not recreate the same data structure onthe client

Hi guys,
I am trying to use OC4J as an EJB container and have come across the following problem, which looks like a bug.
I have a value object method that returns an instance of ArrayList with references to other value objects of the same class. The value objects have references to other value objects. When this structure is marshalled across the network, we expect it to be recreated as is but that does not happen and instead objects get duplicated.
Suppose we have 2 value objects: ValueObject1 and ValueObject2. ValueObject1 references ValueObject2 via its private field and the ValueObject2 references ValueObject1. Both value objects are returned by our method in an ArrayList structure. Here is how it will look like (number after @ represents an address in memory):
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@2
Object[1].getValueObject[0] = com.cramer.test.SomeVO@1
We would expect to see the same (except exact addresses) after marshalling. Here is what we get instead:
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@3
Object[1].getValueObject[0] = com.cramer.test.SomeVO@4
It can be seen that objects get unnecessarily duplicated â“ the instance of the ValueObject1 referenced by the ValueObject2 is not the same now as the instance that is referenced by the ArrayList instance.
This does not only break referential integrity, structure and consistency of the data but dramatically increases the amount of information sent across the network. The problem was discovered when we found that a relatively small but complicated structure that gets serialized into a 142kb file requires about 20Mb of network communication. All this extra info is duplicated object instances.
I have created a small test case to demonstrate the problem and let you reproduce it.
Here is RMITestBean.java:
package com.cramer.test;
import javax.ejb.EJBObject;
import java.util.*;
public interface RMITestBean extends EJBObject
public ArrayList getSomeData(int testSize) throws java.rmi.RemoteException;
public byte[] getSomeDataInBytes(int testSize) throws java.rmi.RemoteException;
Here is RMITestBeanBean.java:
package com.cramer.test;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.util.*;
public class RMITestBeanBean implements SessionBean
private SessionContext context;
SomeVO someVO;
public void ejbCreate()
someVO = new SomeVO(0);
public void ejbActivate()
public void ejbPassivate()
public void ejbRemove()
public void setSessionContext(SessionContext ctx)
this.context = ctx;
public byte[] getSomeDataInBytes(int testSize)
ArrayList someData = getSomeData(testSize);
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println(" serialised output size: "+byteOutputStream.size());
byte[] bytes = byteOutputStream.toByteArray();
objectOutputStream.close();
byteOutputStream.close();
return bytes;
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return null;
public ArrayList getSomeData(int testSize)
// Create array of objects
ArrayList someData = new ArrayList();
for (int i=0; i<testSize; i++)
someData.add(new SomeVO(i));
// Interlink all the objects
for (int i=0; i<someData.size()-1; i++)
for (int j=i+1; j<someData.size(); j++)
((SomeVO)someData.get(i)).addValueObject((SomeVO)someData.get(j));
((SomeVO)someData.get(j)).addValueObject((SomeVO)someData.get(i));
// print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Check the serialised size of the structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return someData;
Here is RMITestBeanHome:
package com.cramer.test;
import javax.ejb.EJBHome;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
public interface RMITestBeanHome extends EJBHome
RMITestBean create() throws RemoteException, CreateException;
Here is ejb-jar.xml:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateful )</description>
<display-name>RMITestBean</display-name>
<ejb-name>RMITestBean</ejb-name>
<home>com.cramer.test.RMITestBeanHome</home>
<remote>com.cramer.test.RMITestBean</remote>
<ejb-class>com.cramer.test.RMITestBeanBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
And finally the application that tests the bean:
package com.cramer.test;
import java.util.*;
import javax.rmi.*;
import javax.naming.*;
public class RMITestApplication
final static boolean HARDCODE_SERIALISATION = false;
final static int TEST_SIZE = 2;
public static void main(String[] args)
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL, "ormi://lil8m:23792/alexei");
props.put(Context.SECURITY_PRINCIPAL, "admin");
props.put(Context.SECURITY_CREDENTIALS, "admin");
try {
// Get the JNDI initial context
InitialContext ctx = new InitialContext(props);
NamingEnumeration list = ctx.list("comp/env/ejb");
// Get a reference to the Home Object which we use to create the EJB Object
Object objJNDI = ctx.lookup("comp/env/ejb/RMITestBean");
// Now cast it to an InventoryHome object
RMITestBeanHome testBeanHome = (RMITestBeanHome)PortableRemoteObject.narrow(objJNDI,RMITestBeanHome.class);
// Create the Inventory remote interface
RMITestBean testBean = testBeanHome.create();
ArrayList someData = null;
if (!HARDCODE_SERIALISATION)
// ############################### Alternative 1 ##############################
// ## This relies on marshalling serialisation ##
someData = testBean.getSomeData(TEST_SIZE);
// ############################ End of Alternative 1 ##########################
} else
// ############################### Alternative 2 ##############################
// ## This gets a serialised byte stream and de-serialises it ##
byte[] bytes = testBean.getSomeDataInBytes(TEST_SIZE);
try {
java.io.ByteArrayInputStream byteInputStream = new java.io.ByteArrayInputStream(bytes);
java.io.ObjectInputStream objectInputStream = new java.io.ObjectInputStream(byteInputStream);
someData = (ArrayList)objectInputStream.readObject();
objectInputStream.close();
byteInputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
// ############################ End of Alternative 2 ##########################
// Print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Print out the size of the serialised structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
catch(Exception ex){
ex.printStackTrace(System.out);
The parameters you might be interested in playing with are HARDCODE_SERIALISATION and TEST_SIZE defined at the beginning of RMITestApplication.java. The HARDCODE_SERIALISATION is a flag that specifies whether Java serialisation should be used to pass the data across or we should rely on OC4J marshalling. TEST_SIZE defines the size of the object graph and the ArrayList structure. The bigger this size is the more dramatic effect you get from data duplication.
The test case outputs the structure both on the server and on the client and prints out the size of the serialised structure. That gives us sufficient comparison, as both structure and its size should be the same on the client and on the server.
The test case also demonstrates that the problem is specific to OC4J. The standard Java serialisation does not suffer the same flaw. However using the standard serialisation the way I did in the test case code is generally unacceptable as it breaks the transparency benefit and complicates interfaces.
To run the test case:
1) Modify provider URL parameter value on line 15 of the RMITestApplication.java for your environment.
2) Deploy the bean to the server.
4) Run RMITestApplication on a client PC.
5) Compare the outputs on the server and on the client.
I hope someone can reproduce the problem and give their opinion, and possibly point to the solution if there is one at the moment.
Cheers,
Alexei

Hi,
Eugene, wrong end user recovery. Alexey is referring to client desktop end user recovery which is entirely different.
Alexy - As noted in the previous post:
http://social.technet.microsoft.com/Forums/en-US/bc67c597-4379-4a8d-a5e0-cd4b26c85d91/dpm-2012-still-requires-put-end-users-into-local-admin-groups-for-the-purpose-of-end-user-data?forum=dataprotectionmanager
Each recovery point has users permisions tied to it, so it's not possible to retroacively give the users permissions. Implement the below and going forward all users can restore their own files.
This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

ABS does not download the entire package tree

I want to compile php-apache in order to work with apache24 from the AUR but when I run abs it does not download the source code of the php-apache package.
That's the case with many packages as well.
After updating pacman database and running abs:
ls -l /var/abs/extra|wc -l
2030
pacman -Sl extra|wc -l
2808

Yes it does. There are split packages for which one package build can make several distinct packages. For an example, see vim's PKGBUILD.
Fetch the "php" PKGBUILD to rebuild php-apache.
Last edited by Trilby (2014-02-20 18:57:50)

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

RFC does not get the updated data

Hi Experts,
I am not getting the updated data via RFCs.
The scenario is like this.
Step 1: I open the Application running on System "B".
Step 2: I add a record in second Application which is on system "A".
Now I want the same data to be reflected on Application running on System "B" on some event.
I observed the data is never reflected in Application running on System "B", but when I refresh the page of this Application, I get the updatred data. Do you have any clues why this is happening.
Best Regards,
Arti.

Hi,
Can you be bit more clear about the requirement. It is logical that without refresh updated data wont be shown.
Thanks,
Vinod.

HP PSC 1300 Series printer does not print the entire last line on page

Using an HP PSC 1310 series printer (1315xi I think). Just changed computers and OS from winXP to Win7 Professional. Now the very bottom line on my checks only shows the top 10% of that last line. There is a 1-inch margin at the bottom of 11.5" LETTER paper. There is no problem if I use another printer (HP PSC 1210xi). Is there an updated 1310 series driver that wasn't automatically selected by Win7Prof when I switched computers?

I see no way to adjust the margins on the printer. When I click 'Printer Properties - Effects' the Margins area has nothing I can change and even though there is a box to Minimize Margins, it cannot be clicked. Using the Resizing Option to reduce page to 95% does not pull the last line into the printable area. I can print the file to PDF using doPDF v7 and then see the printable white area that goes just under the last line when I choose the 1210xi printer, but when I select the 1300 series printer the white area moves slightly upward just above most of the last line to be printed. I can't choose the pdf selection to fit or shrink to printer because that distorts the page on my pre-printed checks, so I must choose Page Scaling as 'None'. My checks printed fine on the old computer with XP and using the same PSC 1300 printer. I've also tried to print to another printer that prints the last line with no problem.

Not reading the right data value

So I am reading data from a txt file that I created,in particular I am trying to pull out the first column which is the time data. When I read it using the "Read from spreadsheet file.vi" I am getting unexpected values. For example when the first value in the file is 1491.044016 it displays 1491.044067, it does this for every value? I thought it may have been a formating issue but I set the vi %.9f on the formating field I'm not sure why it is handling the values this way? Any insights?
thanks,
Chris

Are you using LabVIEW 7.1 or older? In this case, "read from spreadsheet file" uses only SGL precision, which is not sufficient for your desired resolution.
See also: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=315189#M315189
Solution: Read the file as a plain string and then use "spreadsheet string to array" with DBL as type.
... or upgrade to LabVIEW 8.0 or higher.
LabVIEW Champion . Do more with less code and in less time .

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

Read Measurement file does not read the first channel of my TDMS file

When I try to read a TDMS file with the Read Measurement File express VI, the first channel of the data is not there. When I open the file up in excel the channel exists

Even I have the same doubt regarding Labview plss help me reading the Excel file from 23rd row and the graph should be drawn between 1st column and 8th column , from 23rd row . Here is the sample data.
Attachments:
Book1.xlsx ‏204 KB

Input sream does not read the entire dat

Similar Messages

Maybe you are looking for