Insert into ztable through table control
hai
i have taken the table control in the screen painter .
n i have enter the data in table control
now i like to append the dat into table
plz helpme need the code
Refer the link -
Update internal table data from table control
Transfer data from table control to internal table
Regards,
Amit
Reward all helpful replies.
Similar Messages
-
Validations when inserting records into database using table control?
hi , guru's.
iam inserting records into database table through table control when i press insert i want check which record is existing and which is not . so please give me any sample code
regards,
satheesh.hi , arjun.
please check this code.
WHEN 'INSERT'.
data: g_vcontrol_itab1 like table of zcust_call_rec,
g_vcontrol_wa1 like g_vcontrol_wa.
SELECT * FROM zcust_call_rec
INTO CORRESPONDING FIELDS OF TABLE g_vcontrol_itab1
FOR ALL ENTRIES IN g_vcontrol_itab
WHERE kunnr = g_vcontrol_itab-kunnr AND budat = g_vcontrol_itab-budat.
loop at g_vcontrol_itab into g_vcontrol_wa.
read table g_vcontrol_itab1 into g_vcontrol_wa1
with table key g_vcontrol_wa-kunnr = kunnr and g_vcontrol_wa-budat = budat.
if sy-subrc = 0.
delete g_vcontrol_itab.
endif.
endloop.
LOOP AT g_vcontrol_itab INTO g_vcontrol_wa.
INSERT into zcust_call_rec values g_vcontrol_wa.
ENDLOOP.
with this iam getting error message like this.
<b>g_vcontrol_wa-budat is not expected.</b> -
How to insert multiple entries in table control
Hi All,
I want to insert multiple entries in table control in BDC program.Can any body help in this regard.
Thanks,
Satish.Hi,
Go through the following 2 example programs:
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
ABAP Name : ZMM_PR_UPLOAD_MAT
Description : PR Upload BDC Program(With Material)
Created by : Anji Reddy V
Created on : 04/11/2004
Description : This Program is used to Upload the Purchase
Requisition data Using the Transaction ME51N.
Modification Log:
Date Programmer Correction Description
04/11/2004 Anji Reddy Initial
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
reward for useful answers.
Regards,
Anji -
How to show data through table control
Hi Experts,
I have created an table control through wizard using table EKKO.
I have to populate one internal table( type ekko ), and then show it in output through table control.
Please advise, how to do that and in where i have to write the codes.
I will reward points for every suggestion
Thanks in advance.
regardshi saubrab,
This is kiran kumar.G.I am sending some sample code to populate data into table control check it once.
i will give input in 100 screen. and display table control in 200 screen.check it once once ..ok....
SE38 :(CODE)
*& Module pool YMODULEPOOL_TABLECONTROL1 *
*& DEVELOPER : KIRAN KUMAR.G *
*& PURPOSE : TABLE CONTROL DEMO *
*& CREATION DT : 17/12/2007 *
*& T.CODE : YMODTABLECONTROL1 *
*& REQUEST : ERPK900035 *
PROGRAM ymodulepool_tablecontrol1.
Tables
TABLES: yvbap, "Sales Document: Item Data
vbak. "Sales Document: Header Data
Controls
CONTROLS: my_table TYPE TABLEVIEW USING SCREEN 200.
Global Variables
DATA: gv_lines TYPE i,
gv_lines1 type i,
gv_temp type i,
gv_flag(20) TYPE c VALUE 'DISP',
gv_mode1 TYPE c,
gv_mode TYPE c VALUE 'C'. " C: Change, D :Display
Internal Table
DATA: BEGIN OF gt_item OCCURS 0,
vbeln LIKE vbap-vbeln, "Sales Document Number
posnr LIKE vbap-posnr, "Sales Document Item
matnr LIKE vbap-matnr, "Material Number
matkl LIKE vbap-matkl, "Material Group
arktx LIKE vbap-arktx, "Short Text for Sales Order Item
cflag, "Deletion Indicator
END OF gt_item.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZTABLECONTROL' OF PROGRAM 'YMODULEPOOL_TABLECONTROL'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'DISP'.
SELECT single vbeln
erdat
angdt
bnddt
FROM vbak
INTO (vbak-vbeln,vbak-erdat,
vbak-angdt,vbak-bnddt)
WHERE vbeln = vbak-vbeln.
IF sy-subrc EQ 0.
*Fetch the table control data and place them in Internal Table
SELECT vbeln
posnr
matnr
matkl
arktx
FROM yvbap
INTO TABLE gt_item
WHERE vbeln = vbak-vbeln.
IF sy-subrc EQ 0.
*NO OF line in the Internal Table
DESCRIBE TABLE gt_item LINES gv_lines.
my_table-lines = gv_lines + 20.
ENDIF.
ENDIF.
*Call Screen 200.
SET SCREEN 200.
WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
*Exit from the Program
CALL TRANSACTION 'SESSION_MANAGER'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
module STATUS_0200 output.
SET PF-STATUS 'ZTABLECONTROL1'.
endmodule. " STATUS_0200 OUTPU
*& Module copy_data OUTPUT
text
module copy_data output.
*Fetch the current line data from the Table control
read table gt_item index my_table-current_line.
if sy-subrc eq 0.
*Populating data into screen fields
gt_item-vbeln = gt_item-vbeln.
gt_item-posnr = gt_item-posnr.
gt_item-matnr = gt_item-matnr.
gt_item-matkl = gt_item-matkl.
gt_item-arktx = gt_item-arktx.
endif.
SE51:CODE (SCREEN 100)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SE51 :CODE (SCREEN 200)
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
loop at gt_item with control my_table cursor my_table-current_line.
module copy_data.
endloop.
PROCESS AFTER INPUT.
loop at gt_item.
MODULE USER_COMMAND_0200.
endloop.
HAVE A NICE DAY..
Award points if helpful,kiran kumar.G -
Second record not inserting into ztable
Hi All,
I have designed z table with following fields.
1) CONSULTANT
2) MODULE_NAME
3) CR_DATE
4) ISSUE
5) RPT_NAME
6) TCODE
7) REQ_NO
8) DEV_STA
9) QA_STA
10) PRD_STA.
the ztable contains no primaty key as we are storing the duplicates values
I have created One screen with all above fields using module pooled programming. One Input screen is designed containing all above fields. after that when i click on SAVE Button all above fields are getting inserted into ztable. But when i again fill the data the second record is not getting inserted into ztable.
I have written the following code for this :
wa_issue-CONSULTANT = ZISSUE-CONSULTANT.
wa_issue-MODULE_NAME = ZISSUE-MODULE_NAME.
wa_issue-CR_DATE = ZISSUE-CR_DATE.
wa_issue-ISSUE = ZISSUE-ISSUE.
wa_issue-RPT_NAME = ZISSUE-RPT_NAME.
wa_issue-TCODE = ZISSUE-TCODe.
wa_issue-REQ_NO = ZISSUE-REQ_NO.
wa_issue-DEV_STA = ZISSUE-DEV_STA.
wa_issue-QA_STA = ZISSUE-QA_STA.
wa_issue-PRD_STA = ZISSUE-PRD_STA.
insert into zissue values wa_issue .
commit work.Hi,
hcheck the key fields in the table
Regards,
V.Balaji
Reward if Usefull... -
Multi-table mapping is not inserting into the primary table first.
I have an inheritance mapping where the children are mapped to the parent table oids with the "Multi-Table Info" tab.
One of children is not inserting properly. Its insert is attempting to insert into one of the tables from the "Additional Tables" of "Multi-Table Info" instead of the primary table that it is mapped to.
The other children insert correctly. This child is not much different from those.
I looked through the forums, but found nothing similiar.I would expect the Children to be inserted into both the primary table and the Additional Table? Is the object in question inserted into the primary table at all? Is the problem that it is being inserted into the Additional Table first? If it is, are the primary key names different? Is it a foreign key relationship?
If the object in question has no fields in the additional table is it mapped to the additional table? (it should not be)
Perhaps providing the deployment XML will help determine the problem,
--Gordon -
File to RFC problem- data is not inserting into ztable in R3 system
Hi
i have done File to RFC scenario which picks data from flat file and inserts into ztable via RFC in R3. but while testing my scenario everything is successful in XI monitoring (Successful flag in MONI and RWB) and in auditlog message status is DLVD.
it seems to be everything successful in XI and RFC call also successful in R3 system.
but for some reason data is not inserting into table (RFC is used to insert data into ztable)
Is there any way to debug RFC call excecution in XI..?
RFC code is like this:
insert ZMM_AUTO_GR from INPUT_TABLE.
commit work.
END FUNCTION.
please advice what could be the reason not inserting into table.
Help would be appreciated.
Regards,
RajeshHi Praveen,
please see audit log- from communication channel monitoring..
Receiver channel 'CC_INCA_RFC_SAPECC_Receiver' for party '', service 'R3DCLNT210' (internal name 'RfcClient[CC_INCA_RFC_SAPECC_Receiver]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2008-07-28 04:32:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 04:31:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:56:56 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:49:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:48:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA -
Inserts into Global Temporary Table
I'm working on using a global temporary table in one of my apps. I have a small test run here to isolate the problem. It simply creates the global temporary table, inserts a row, commits and then does a select to see if the insert worked. No data shows in the table when running this. I don't know much about global temp tables, so any help would be appreciated.
CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT DELETE ROWS;
INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(0, '', SYSDATE, SYSDATE);
commit;
SELECT * FROM AGENT_SILO.AS_TEMP_VALIDATE;So I wonder what else I'm doing wrong that's really obvious. Here's what i'm trying to accomplish and maybe there's a better way of going about it.
I have a trigger that is supposed to do some validation before the insert is allowed to go through. So here's my approach. I have a trigger fired when there's an insert into the AS_Employee_history table. This passes some of the fields from this insert into a proc (the id, a flag and a couple of dates). Within the proc, i create a global temp table, insert these passed values into the temp table. Then I have a cursor to basically copy the rows from the as_employee_history table that have the same id. Then I can do some selects on the temp table to see if it passes the validation.
I have outputs throughout for debugging and it gets to right after the inserts into the temp table, then the rest of the code doesn't appear to be executed. So it looks like it's failing at the execution of select statements on the temp table. Anything else obvious that I"m missing here?
Here's my proc.
PROCEDURE "PAS_VALIDATE" (STATUS OUT VARCHAR2, v_status OUT BOOLEAN, NEW_SBI_EMPLOYEE_ID IN NUMBER,
NEW_CURRENT_FLAG IN CHAR, NEW_EFFECTIVE_START IN DATE,
NEW_EFFECTIVE_END IN DATE)
IS
v_prev_effective_end date;
v_flag_count number;
v_flag_count_date number;
--variables to store dynamic sql returns
v_sql_flag_count_date varchar2(255);
v_sql_flag_count varchar2(255);
v_sql_prev_eff_end varchar2(255);
cursor c_row is
select * from AGENT_SILO.AS_EMPLOYEE_HISTORY EMP
where (EMP.SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID);
r_row c_row%ROWTYPE;
BEGIN
Status := 'Started';
v_status := true;
DBMS_OUTPUT.PUT_LINE('Creating temporary table...');
execute immediate 'CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT PRESERVE ROWS';
DBMS_OUTPUT.PUT_LINE('Validating the data...');
--DBMS_OUTPUT.PUT_LINE('Inserting submitted row into temp table');
--Insert the new row being submitted from user into the temp table
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || NEW_SBI_EMPLOYEE_ID || ',
''' || NEW_CURRENT_FLAG || ''',
to_date(''' || to_char(NEW_EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(NEW_EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
--Insert the other rows to we end up with a subset of the employee history table
--with only rows that match the sbi_employee_id of the submitted row
--DBMS_OUTPUT.PUT_LINE('Inserting into temp table...');
open c_row;
loop
fetch c_row into r_row;
exit when c_row%NOTFOUND;
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || r_row.SBI_EMPLOYEE_ID || ',
''' || r_row.CURRENT_FLAG || ''',
to_date(''' || to_char(r_row.EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(r_row.EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
end loop;
close c_row;
DBMS_OUTPUT.PUT_LINE('After inserts');
-----Store queries to determine values for validation--------------------------
v_sql_prev_eff_end := 'SELECT to_char(max(effective_end), ''dd-mon-yy'')
FROM AGENT_SILO.AS_TEMP_VALIDATE
where to_char(EFFECTIVE_END, ''dd-mon-yy'') != ''31-dec-99'' AND
SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID';
--Find the largest effective_end, besides the 9999 value
execute immediate v_sql_prev_eff_end into v_prev_effective_end;
DBMS_OUTPUT.PUT_LINE('The highest previous end date: ' || v_prev_effective_end);
--...........Validation testing...........
execute immediate 'DROP TABLE AGENT_SILO.AS_TEMP_VALIDATE'; --Drop temp table
DBMS_OUTPUT.PUT_LINE('Validation Procedure Complete');
COMMIT;
status:='Success';
EXCEPTION
When Others Then
ROLLBACK;
Status := SQLERRM;
END;
Thanks a bunch for helping a noob out. -
How to insert into two differents tables at the same time
Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
EdgarOracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null -
Inserting into a base table of a materialized view takes lot of time.......
Dear All,
I have created a materialized view which refreshes on commit.materialized view is enabled query rewrite.I have created a materialized view log on the base table also While inserting into the base table it takes lot of time................Can u please tell me why?Dear Rahul,
Here is my materialized view..........
create materialized view mv_test on prebuilt table refresh force on commit
enable query rewrite as
SELECT P.PID,
SUM(HH_REGD) AS HH_REGD,
SUM(INPRO_WORKS) AS INPRO_WORKS,
SUM(COMP_WORKS) AS COMP_WORKS,
SUM(SKILL_WAGE) AS SKILL_WAGE,
SUM(UN_SKILL_WAGE) AS UN_SKILL_WAGE,
SUM(WAGE_ADVANCE) AS WAGE_ADVANCE,
SUM(MAT_AMT) AS MAT_AMT,
SUM(DAYS) AS DAYS,
P.INYYYYMM,P.FIN_YEAR
FROM PROG_MONTHLY P
WHERE SUBSTR(PID,5,2)<>'PP'
GROUP BY PID,P.INYYYYMM,P.FIN_YEAR;
Please help me if query enable rewrite does any performance degradation......
Thanks & Regards
Kris -
How to select data from 3rd row of Excel to insert into Sql server table using ssis
Hi,
Iam having Excel files with headers in first two rows , i want two skip that two rows and select data from 3rd row to insert into Sql Server table using ssis.3rd row is having column names.CUSTOMER DETAILS
REGION
COL1 COL2 COL3 COL4 COL5 COL6 COL7
COL8 COL9 COL10 COL11
1 XXX yyyy zzzz
2 XXX yyyy zzzzz
3 XXX yyyy zzzzz
4 XXX yyyy zzzzz
First two rows having cells merged and with headings in excel , i want two skip the first two rows and select the data from 3rd row and insert into sql server using ssis
Set range within Excel command as per below
See
http://www.joellipman.com/articles/microsoft/sql-server/ssis/646-ssis-skip-rows-in-excel-source-file.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Unable to add ztables in table control
Dear experts,
i have got ztables, using table controls in module pool. i need to display multiple tables in TC for accepting the values and also displaying the data from the database. I am also not getting the column headings for the fields from ztables on the TC.
Thanks,
Regards,CHKHello
Check this
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/frameset.htm
Thanks -
Nologging direct-path insert into an indexed table
Hello,
Does anyone have an idea how I can suppress generation of undo logs for direct-path insert into an indexed table on 11.2.0.1.0:
CREATE TABLE TBL(ID NUMBER) NOLOGGING;
CREATE INDEX IDX ON TBL(ID) NOLOGGING;
INSERT /*+ APPEND */ INTO TBL SELECT /*+ APPEND */ ROWNUM FROM ...; -- Source table has 400,000,000+ rows
Regards,
Angel TsankovPl do not post duplicates - Why does Oracle not use direct-path insert when instructed to do so - pl continue the discussion in your original thread
-
XSQL Insert into Schema based Table
Hi,
I am struggling with this one:
My test XML is well formed:
<?xml version="1.0"?>
<SC_ESP>
<ResultSet>
<ApplicationID>App0001</ApplicationID>
<Reason>Sucess</Reason>
</ResultSet>
</SC_ESP>
Whan I try to POST this XML data via the XSQL Servlet
I get the following error:
"Character '$' is not allowed in a XML tag name."
Anyone (Mark ?) know what it means ?
Thanks
MartinHello Mark,
I don't know which time zone you are in but thanks for the very prompt replies.
All I am trying to with this test is provide an XML input test facility via HTTP. The users are supposed to paste the XML into a TextAre using their browser and have that data inserted into the corresponding Table(s) via the XSQL servlet.
The XML schema have already been registered but I note from your other reply that I have not added the annotation xdb:storeVarrayAsTable="true" to the schema tags.
It is worth noting that the whole thing works if I create a simple table that is NOT related to an XML Shema.
You say that you have not had to use the XSQl Servlet. Would you care to say what approach you would use for the above requirement. Shall I set about writing my own Servlet to do this. -
How to execute a Java method when row inserted into a database table?
I have the need to fire off a java method when a row is inserted into a database table. I am unfortunately working with MySQL which just recently supported triggers but these new triggers can not execute a Java application on any event.
What I am looking for is an event driven approach such that when a row is inserted into a specific table I can fire off a java method (sitting in a tomcat container) that will take the contents and send it to a web service.
It has been mentioned that JMS may have the ability to poll and monitor a database table. Just wondering if anyone could point me in the right direction.
thanks
JavaTekA service handler might be the right way to run some code at the end of a service call (another way would be to make use of filters).
First, make sure your static table is merged with ServiceHandlers.
Secondary, change your custom method name into one that is not already in the service definition of COLLECTION_COPY_LOT (preferably a unique method name like collectionCopyLotLastAction that describes its purpose) and remove the following line from your code:
m_service.doCodeEx("",this);Now create a service definition for COLLECTION_COPY_LOT in your custom component based on the original COLLECTION_COPY_LOT (copy paste from the original service definition) and add you own method collectionCopyLotLastAction as the last step in the service. Play with the load order to make sure CS is using your service definition of COLLECTION_COPY_LOT instead of the original.
regards,
Fabian
Maybe you are looking for
-
Append new records for a spool file
Hello, I am running a query and sending the output to a spool file. The query never returns the same data because it is run every 2 hours How can I make the spool to append the new records and not overwrite the old records? Thanks Carlos
-
HTML doesn't work except in Internet Ex;plorer
I am new to Dreamweaver and have set up the beginnings of a site, using template and files: www.kojonupworking.com.au This site shows the top navigation texts in Internet Explorer but not in Firefox or Netscape and I can't work out why. Can anyone gi
-
I am looking for a solution for audio with Back to mac. I downloaded soundfly and it works on my local network, but not when I am out out on the road connecting to my home computer. Any ideas?
-
I have a panel with a button. The panel have a MouseMotionListener registered, but when the mouse is over the button the MouseEvent stop to go to the panel and go to the button. How can i let the panel understand to "keep the event also for me" ? Thi
-
MIgration from physical servers to Oracle Solaris Containers
We are in process of migrating our Oracle Databases from a physical SUN SPARC servers to Oracle Solaris Container. Do we need to any extra setting in the Oracle side or server side in a virtualized environment to run Oracle databases? Any comment wil