Inserting a Check Box
I have CS2. This should be an easy thing, but I can't figure out how to do it. I have made a table, and I want to type text and put a check box next to it, and I don't see how to do that. Please help. Thanks.
There are many ways to create a check box (filled or empty).
Fonts to look for include Zapf Dingbats and Wingdings. There are others, but these two are common enough.
Use the Glyphs Pallete to add the dingbats/wingdings. Use the Bullets and Numbering to automate adding them. You can create a new column in the table to hold the check boxes, or you can edit your paragraph style to make the text have a hanging indent for the check box glyph.
Using the paragraph style with a defined bullet is, IMO, the best option for "automating" placement of a check box. Go to the Bullet and Numbering section and change the list type to bullet, click the Add. button, define the font and select the desired glyph. Don't forget to set the indents.
Similar Messages
-
Hi,
I use Contribute 3 to edit and amend our web site and need to
add some check boxes, but cannot find any tool, button, etc... that
has one to insert. Is this even an option? If so, where do I find
one in Contribute to insert? There is nothing listed under the HELP
section for CHECK BOX, CHECK BOXES, CHECK BUTTONS, Etc....
Thank you!
ErinDreamweaver (DW) is a great tool for building web pages, and
you'll be able to add forms to your pages easily. DW also
integrates well with Contribute, and there is a trial version.
If your budget doesn't strectch that far you could use a text
editor but you're going to have to learn all of the coding that raw
HTML requires. -
Word 2013 - check box changes to False
Hello,
Situation: A user clicks New to open a form from SharePoint 2013. User completes all appropriate boxes, closes, and saves the file with an appropriate file name. When the form advances to the next user for review, the
Resubmit check box changes to False.
The XML Mapping Pane was used to insert the check box. Meaning:
Click Developer on the ribbon.
Click XML Mapping Pane.
In the XML Mapping pane, right-click Resubmit > Insert Content Control > Checkbox.
I have used this approach in the past to avoid the issue I'm describing, and it has always worked. When the form is Rejected, the Initiator must then revise the form and resubmit for review by selecting the
Resubmit check box.
Any ideas how to remedy this issue and ensure the check box never changes to False?
Appreciate any feedback.
Thank you,
GaryHi Gary,
Welcome to MSDN forum.
This forum is discussing about the Windows forms and the controls in Winform in Visual Studio. Your issue seems more related with customizations in SharePoint, I would move this thread to the more related forum.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Hi Experts,
I had an Issue,I inserted a Check Box in ALV.When I checked it ON_CELL_ACTION event is triggered its fine,but in the view the check in the Check Box does not remains..????I would make sure you aren't rebinding the context data that is mapped to the context on each event. Are you perhaps doing some processing in the WDDOMODIFYVIEW? What is the coding that you have in the event handler?
-
Wanna have a check box in my alv.
have a boolean field 'CHECKBOX' in my context.
but how to display the check box in my table now?Hi,
This is ramkumar now i am in Webdynpro abap area.I want to insert the check box in the first column of the ALV table for this i wrote the code in WDMODIFY in the view.
method WDDOMODIFYVIEW .
DATA: l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
l_ref_cmp_usage = wd_this->wd_cpuse_alv_checkbox( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
l_ref_cmp_usage->create_component( ).
ENDIF.
DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv_checkbox( ).
DATA:
l_value TYPE REF TO cl_salv_wd_config_table.
l_value = l_ref_interfacecontroller->get_model( ).
DATA: lt_columns TYPE salv_wd_t_column_ref,
ls_column TYPE salv_wd_s_column_ref,
lr_checkbox TYPE REF TO cl_salv_wd_uie_checkbox,
lr_column_settings TYPE REF TO if_salv_wd_column_settings.
* Set checkbox
lr_column_settings ?= l_value.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
WHEN 'ENABLED'.
CREATE OBJECT lr_checkbox
EXPORTING
checked_fieldname = ls_column-id.
ls_column-r_column->set_cell_editor( lr_checkbox ).
ENDCASE.
ENDLOOP.
endmethod.
Embeded the view in window and embeded the ALV component view in viewUIcontainerelement.and tested,but i am getting the runtime error Data no longer available when SALV_WD_TABLE GET_MODEL called kindly help me inthe same. -
How to insert check box fields in a htmlb: tableview
Hi,
Can anybody tell me how to insert check box fields in a htmlb: tableview in a sequence of rows in a table view. How to generate the sequence no for the checkbox inorder to know the row that is checked.
Thanks in advance,
Aruna.Here is the code which has the custom "Checkbox" in the tableview & Triggers the event. <b>You can identify the checkbox based on cell ID (p_cell_id)</b> in the method "IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START" & Based on the event name + Cell ID. Look at the code & let me know if you any issue.
<b>Layout:</b>
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content id = "content"
design = "design2002+design2003"
controlRendering = "SAP"
rtlAutoSwitch = "true"
forceEncode = "ENABLED" >
<htmlb:page title="Test " >
<htmlb:form>
<%
data TV_ITERATOR Type Ref To zcl_itr.
data iterator type ref to IF_HTMLB_TABLEVIEW_ITERATOR.
create object tv_iterator exporting appl_cons = application.
iterator = tv_iterator.
%>
<htmlb:tableView id = "fligts"
headerText = "Flight"
width = "100"
headerVisible = "true"
design = "alternating"
visibleRowCount = "10"
fillUpEmptyRows = "true"
showNoMatchText = "true"
filter = "server"
sort = "server"
onHeaderClick = "MyEventHeaderClick"
table = "<%= APPLICATION->itab %>"
iterator = "<%= ITERATOR %>" />
</htmlb:form>
</htmlb:page>
</htmlb:content>
<b>Event Handling:</b>
DATA: EVENT_ID1 TYPE REF TO IF_HTMLB_DATA.
EVENT_ID1 = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
CASE EVENT_ID1->EVENT_SERVER_NAME.
IF NOT event_id1 IS INITIAL.
if event_id1->server_event+0(9) = 'chkevent'.
SPLIT event_id1->server_event AT '-' INTO v_event v_dummy v_row v_col.
endif.
endif.
method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS.
CLEAR p_column_definitions.
CLEAR p_overwrites.
DATA: tv_column TYPE TABLEVIEWCONTROL.
tv_column-COLUMNNAME = 'FLDATE'.
tv_column-edit = 'X'.
tv_column-sort = 'X'.
tv_column-TITLE = 'Flight Date'.
tv_column-WIDTH = '100'.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-edit = 'X'.
tv_column-COLUMNNAME = 'CONNID'.
tv_column-TITLE = 'Conn.ID'.
tv_column-WIDTH = '70'.
tv_column-HORIZONTALALIGNMENT = 'center'.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-edit = 'X'.
tv_column-COLUMNNAME = 'CHECKBOX1'.
tv_column-TITLE = 'Check Box'.
tv_column-WIDTH = '30'.
tv_column-HORIZONTALALIGNMENT = 'center'.
APPEND tv_column TO p_column_definitions.
endmethod.
METHOD IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
DATA: L_EVENT TYPE STRING.
CASE P_TABLEVIEW_ID.
WHEN 'fligts'.
CASE P_COLUMN_KEY.
WHEN 'CHECKBOX1'.
* CONCATENATE 'chk_event' '123' '2323' INTO L_EVENT SEPARATED BY '-' .
CONCATENATE 'chkevent' p_cell_id INTO l_event SEPARATED BY '-'.
P_REPLACEMENT_BEE = CL_HTMLB_CHECKBOX=>FACTORY( ID = P_CELL_ID
ONCLICK = L_EVENT CHECKED = 'false' ).
ENDCASE.
ENDCASE.
ENDMETHOD.
Hope this will solve your problem.
<b><i>* Reward each helpful answer.</i></b>
Raja T
Message was edited by:
Raja T -
How to insert check box value in table?
Hi all
kindly help me how to insert check box value in database. what code i have to use as i am new in programing.
thanx in advanceHi,
There is no "Check box" in a table, a check box is a GUI (Graphical user interface) item.
What you want is to store a boolean value in a table. For that you can use the varchar2(1) datatype and store Y or N. (or anything else)
(you cannot define boolean as a datatype for a column).
If you're using a front-end application like apex then it might be useful for you to read the documentation about chekc boxes :
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/check_box.htm#CHDDFBFH
(for the rest if it's Oracle Forms then everything is already said).
Edited by: user11268895 on Aug 17, 2010 10:44 AM -
How to insert check box in pages?
This may be a dumb question, but how to insert check box in Pages? Thanks
Hi ...
Try this thread > Checkboxes in Pages?: Apple Support Communities -
How to check/uncheck all check boxes in an insert-not-allowed block
Hi All,
I have a column of check box which is placed in a multirow block. This block's INSERT_ALLOWED property is set to false. The column of check box is not a database item and its insert_allowed property is to true. Now I use the following code which is in when-button-pressed trigger to control checking/unchecking all the check boxes:
go_block('selected_payment');
first_record;
loop
:cb_payflag:= 'N'; -- uncheck the check box
exit when (:system.last_record = 'true');
next_record;
end loop;
It gives me 'FRM-41051 Cannot create records here' error, and it goes into an infinite loop. It looks like it never reaches the last record where the block actually contains two records.
Please help!
Thanks in advance.
Regards,
VanessaIt sounds like your block does not have a field where the cursor focus can go when looping through the records. Create a dummy non-db field in the block which is enabled and has insert/update allowed. see if it then works. If it does then you can shrink the field down to 1x1 pixels with no border so the user cannot ever click on it and it's invisible.
-
How to Insert check box value into database column
Hi All,
I had checkbox group in a region which is using an LOV......and having 18 items in that lov.
i.e. Total 18 checkboxes in Total. User has to select only 2 checkboxes from that 18.
I created two columns for storing two values of checkboxes. How to insert two selectives in two columns.........Moreover, How to give the query i.e. how to know which values are selected.
Please Help me in achieving this. apart from the two columns (Focus1,Focus2) .......One more column(l_spo_val) is there which is a foreign key.
My Insert Statement is like this:
INSERT INTO SPO_RESEARCH_FOCUS VALUES(l_spo_val
,:P4_RESEARCH_LIST_1
,:P4_RESEARCH_LIST_2);
Please narrate the code if possible.
Thanks,
Sekhar.Hi Denes,
I saw the example in your workspace and it is the same what exactly i want and instead of storing in one column i want to store the two selected values into two different columns. Also i need to restrict the selection of checkboxes upto 2 only. So If the user tries to select the third check box it doesnt have to accept.
Even I am ready to change my table as according to your example i.e. creating only one column. Store the values of selection into that column.
I was unable to see how u wrote the logic (Code) for your example in your workspace. It helps alot if you provide me the code for that example(Multi Checkbox One Column).
I was facinated after watching your examples in your workspace and am very much interested to know more about Apex.
Please help me insolving this as it is long pending issue for my requirement.
Thanks a lot again,
Sekhar.
Edited by: Sekhar Nooney on Mar 26, 2009 4:35 AM -
What are the steps to insert a check or X into a PDF Box?
What are the steps to insert a check or X into a PDF box?
Provided the PDF form was properly created (checkboxes inserted as opposed to text boxes for the viewer to check when the page is printed) you just click as Test Screen Name replied. If not, you'll have to print the filled form and check the boxes yourself - by hand.
-
How i can Insert selected records in database table using check box.
Hi Friends,
I have non database block, which displayed multiple records, now I add a Check Box to this block and now I want to insert the records in a database table which I checked. So when I press a button, all the checked records are inserted in the table.
Please send me the code of this solution.
Thanks in advance.
ShahzadI have almost the exact scenario but instead of inserting into the DB, I want to find the Checked records and process them in PL/SQL script.
I currently have a cursor that looks for all the checked records. It's only getting the first record, so I figured I need to loop through the block looking for checked records.
Also can I save them to a temp or PL/SQL table to process later? -
Multiple Inserts based on check box?
I have an insert form that depending on if checkboxes are
checked, inserts the data. How can I insert a record for the number
of check boxes checked?
Example:
CB 1 = Checked
CB 2 = Not Checked
CB 3 = Checked
So I need to insert a record for CB 1 and CB 3. How can I do
this?
What I'm doing is tying a sales lead to the sales man
selected. I'm using check boxes because I figured it was easiest
but I'm open to suggestions.In your example, CB 1 and CB 3 are checked. But your
explanation states you need to insert a record for CB 1 and CB 2.
What am I missing?
Keep in mind that you will not see the variable FORM.CB2,
since unchecked checkboxes to not pass their name to the action
page. Maybe the code below will help. By naming all the check boxes
the same, you receive a comma-delimited list of the values of only
the checked checkboxes. You can then put this in a list loop and
update your database. -
Updation/insertion of multiple records simultaneously using check box
Hi,
I am using Jdev11.1.1.2.0 version. I have the following scenario.
There is a table in the view.At run time, I need to select multiple records and update those records in the database. So i took check Box as a column in the table.*(I did not associate check box to any of the attributes (columns) in the table.)* After running the application, I selected multiple records using checkbox and submitting them. The check box is returning value as 'false' even for the selected records also instead of 'true'. Because of this we are facing the issue in updating only the selected records. Please suggest your valuable inputs.
I have written the following code in the backing bean to get the selected rows.
BindingContainer bindings =BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIter= (DCIteratorBinding) bindings.get("PttDeliverabvleTrackerEOView2Iterator");
RowSetIterator depRSIter = dcIter.getRowSetIterator();
depRSIter.setRangeSize(depRSIter.getRowCount());
Integer key = depRSIter.getRowCount();
System.out.println("No of rows is "+ key);
int rowIndex =0;
for(int i =0; i<key; i++){
PttDeliverabvleTrackerEOViewRowImpl row = (PttDeliverabvleTrackerEOViewRowImpl) depRSIter.getRowAtRangeIndex(i);
System.out.println("Check box value2 "+ this.getSbc1().isSelected());
if(this.getSbc1().isSelected()){
rowIndex = i;
System.out.println("Row Index: "+ rowIndex);
Please let me know if it is it possible to associate a checkbox to any of the attributes while dragging and dropping the table in the view and update the records?
I tried selecting the option 'Row Selection' while dragging and dropping the table and changed the property RowSelection->multiple. But it is not serving the purpose of updating multiple records.
Please suggest if there is any other solution to update multiple records.
Regards,
Sreelatha.Hi,
if you added checkboxes to a table, then at runtime the checkbox is stamped, which means that a call to this.getSbc1().isSelected() just returns the state of the last checkbox that is rendered. I don't want to go into the details of ADF Faces table rendering here, but point yu to a blog article that does what you are aiming for using ADF BC: http://sameh-nassar.blogspot.com/2009/12/use-checkbox-for-selecting-multiple.html
Frank -
How to print Check Box in smartform
HI,
How to print check box in smartforms. I am using Include Sap Symbol but in the print it is coming as #. Do we need to do any setting like we do for barcode?
Thanks
Raghavendrahi,
u can print a check box in different ways.. by inserting symbols and making window as check box..
once go through the thread u will get to k now differnt ways
putting checkboxes in smartform?
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K
Maybe you are looking for
-
Hi All, Iam having one pivot report output i want sort by column in dashboard if it is table output then we have option to sort by column in dashboard Is this possible to sort by column in pivot output Please help me Thanks in Advance
-
Internet Sharing with my Xbox 360
Hey guys, I was just wondering how to get an open NAT with my PowerBook and xbox 360 setup. Right now my NAT is "strict". I've searched on the board and no one has a solution. I have a D-Link DI-524 wireless router and when I connect the xbox directl
-
White Screen, NOT the shift-w issue
FCP 5.1.4 on an Intel Mac. I have a slew of QT's in the sequence, that will work for a while, but then my sequence viewer will go to white. For no reason. At first I thought it was the shift-w thing, but once being conscious of it, I became aware of
-
Bought 1.5 year old used macbook pro
The hard drive is too small and i need to get a bigger one. I'm a pc convert. Can I buy any new 2.5 drive? Is it a sata drive? How do i find out? Thanks Larry
-
Excellent news for anyone in the UK
Apologies if this has already been posted. O2 Boss Matthew Key has removed the 200MB per month limit from the 'fair-usage' policy on their iPhone tariffs. That is some awesome news! Even if I do never exceed it, nice to know you can! Article here: ht