Inserting a Flag value in to a table using Procedure
Hi All-
we are trying to write a procedure which can refresh Materialized views in the database and upon success full refresh it should insert a flag value say 'Y' or 'N' into a table can you guys give me your thoughts.
Earlier, you said
while i am trying to execute that one it is giving me an error.Multiple people have asked you to tell us what error you received. It is very difficult for us to guess the error that you're receiving and to then guess the solution. Perhaps you don't have permission to the DBMS_SNAPSHOT package, perhaps you mis-spelled the name of the materialized view, perhaps you don't own the materialized view, etc. If you tell us the error you're getting, it's far more likely that we're going to be able to help.
Other than the fact that you're using the DBMS_SNAPSHOT package rather than the DBMS_MVIEW package, which I haven't seen done since the 8i days, I don't see anything obviously wrong with your implementation. As has been pointed out, the design is problematic-- it makes little sense to record in your own table less information than Oracle will record automatically in the data dictionary and to spend time writing additional code to do that lesser level of logging.
Justin
Similar Messages
-
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
Operates on two table using procedure
i want to handle two table using procedure in oracle 10g. i have created a procedure like this
CREATE OR REPLACE PROCEDURE sold_car1(
sid soldcar.sold_id%TYPE,
cid soldcar.id%TYPE,
cuid soldcar.customer_id%TYPE,
eid soldcar.emp_id%TYPE,
d soldcar.dat%TYPE
) IS
BEGIN
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd'));
DELETE FROM pcar where id=cid;*
COMMIT;
END sold_car1;
SHOW ERRORS
i have found some errors. how can i do this.hi
the errors are something like this ''the procedure is created with some errors''.
actually i want to pass 4 parameters in the procedure that will insert in one table and among the 4 parameters by using one parameter i want to delete one row of another table.
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd')); //soldcar is first table
DELETE * FROM pcar where id=cid; //pcar is second table -
How to update the data in sqlserver table using procedure in biztalkserver
Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database -
How to create table using Procedure
Hi,
I want to create table using procedure .
How to write procedure for the table creation?
thanks in advance.Use dynamic sql or DBMS_UTILITY.EXEC_DDL_STATEMENT:
SQL> desc tbl1
ERROR:
ORA-04043: object tbl1 does not exist
SQL> begin
2 execute immediate 'create table tbl1(x number)';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name Null? Type
X NUMBER
SQL> drop table tbl1
2 /
Table dropped.
SQL> begin
2 DBMS_UTILITY.EXEC_DDL_STATEMENT('create table tbl1(x number)');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name Null? Type
X NUMBER
SQL> SY. -
Compare String in a table and insert the common values into a New table
Hi all,
Anyone has idea on how to compare a string value in a table.
I have a Students Table with Student_id and Student_Subject_list columns as below.
create table Students( Student_id number,
Student_Subject_list varchar2(2000)
INSERT INTO Students VALUES (1,'Math,Science,Arts,Music,Computers,Law,Business,Social,Language arts,History');
INSERT INTO Students VALUES (2,'Math,Law,Business,Social,Language arts,History,Biotechnology,communication');
INSERT INTO Students VALUES (3,'History,Spanish,French,Langage arts');
INSERT INTO Students VALUES (4,'History,Maths,Science,Chemistry,English,Reading');
INSERT INTO Students VALUES (5,'Math,Science,Arts,Music,Computer Programming,Language arts,History');
INSERT INTO Students VALUES (6,'Finance,Stocks');
output
Student_id Student_Subject_list
1 Math,Science,Arts,Music,Computers,Law,Business,Social,Language arts,History
2 Math,Law,Business,Social,Language arts,History,Biotechnology,communication
3 History,Spanish,French,Langage arts
4 History,Maths,Science,Chemistry,English,Reading
5 Math,Science,Arts,Music,Computer Programming,Language arts,History
6 Finance,Stocks
I need help or some suggestion in write a query which can compare each row string value of Student_Subject_list columns and insert the
common subjects into a new table(Matched_Subjects).The second table should have the below colums and data.
create table Matched_Subjects(Student_id number,
Matching_studesnt_id Number,
Matched_Student_Subject varchar2(2000)
INSERT INTO Matched_Subjects VALUES (1,2,'Math,Law,Business,Social,Language arts,History');
INSERT INTO Matched_Subjects VALUES (1,3,'History,Langage arts');
INSERT INTO Matched_Subjects VALUES (1,4,'History,Maths,Science');
INSERT INTO Matched_Subjects VALUES (1,5,'Math,Science,Arts,Music,Language arts,History');
INSERT INTO Matched_Subjects VALUES (2,3,'History,Langage arts');
INSERT INTO Matched_Subjects VALUES (2,4,'History,Maths');
INSERT INTO Matched_Subjects VALUES (2,5,'Math,Language arts,History');
INSERT INTO Matched_Subjects VALUES (3,4,'History');
INSERT INTO Matched_Subjects VALUES (3,5,'Language arts,History');
INSERT INTO Matched_Subjects VALUES (4,5,'Math,Science');
output:
Student_id Match_Student_id Matched_Student_Subject
1 2 Math,Law,Business,Social,Language arts,History
1 3 History,Langage arts
1 4 History,Maths,Science
1 5 Math,Science,Arts,Music,Language arts,History
2 3 History,Langage arts
2 4 History,Maths
2 5 Math,Language arts,History
3 4 History
3 5 Language arts,History
4 5 Math,Science
any help will be appreciated.
Thanks.
Edited by: user7988 on Sep 25, 2011 8:45 AMuser7988 wrote:
Is there an alternate approach to this without using xmlagg/xmlelement What Oracle version are you using? In 11.2 you can use LISTAGG:
insert
into Matched_Subjects
with t as (
select student_id,
column_value l,
regexp_substr(student_subject_list,'[^,]+',1,column_value) subject
from students,
table(
cast(
multiset(
select level
from dual
connect by level <= length(regexp_replace(student_subject_list || ',','[^,]'))
as sys.OdciNumberList
select t1.student_id,
t2.student_id,
listagg(t1.subject,',') within group(order by t1.l)
from t t1,
t t2
where t1.student_id < t2.student_id
and t1.subject = t2.subject
group by t1.student_id,
t2.student_id
STUDENT_ID MATCHING_STUDESNT_ID MATCHED_STUDENT_SUBJECT
1 2 Math,Law,Business,Social,Language arts,History
1 3 Language arts,History
1 4 Science,History
1 5 Math,Science,Arts,Music,Language arts,History
2 3 Language arts,History
2 4 History
2 5 Math,Language arts,History
3 4 History
3 5 History,Language arts
4 5 History,Science
10 rows selected.
SQL> Prior to 11.2 you can create your own string aggregation function STRAGG - there are plenty of example on this forum. Or use hierarchical query:
insert
into Matched_Subjects
with t1 as (
select student_id,
column_value l,
regexp_substr(student_subject_list,'[^,]+',1,column_value) subject
from students,
table(
cast(
multiset(
select level
from dual
connect by level <= length(regexp_replace(student_subject_list || ',','[^,]'))
as sys.OdciNumberList
t2 as (
select t1.student_id student_id1,
t2.student_id student_id2,
t1.subject,
row_number() over(partition by t1.student_id,t2.student_id order by t1.l) rn
from t1,
t1 t2
where t1.student_id < t2.student_id
and t1.subject = t2.subject
select student_id1,
student_id2,
ltrim(sys_connect_by_path(subject,','),',') MATCHED_STUDENT_SUBJECT
from t2
where connect_by_isleaf = 1
start with rn = 1
connect by student_id1 = prior student_id1
and student_id2 = prior student_id2
and rn = prior rn + 1
STUDENT_ID MATCHING_STUDESNT_ID MATCHED_STUDENT_SUBJECT
1 2 Math,Law,Business,Social,Language arts,History
1 3 Language arts,History
1 4 Science,History
1 5 Math,Science,Arts,Music,Language arts,History
2 3 Language arts,History
2 4 History
2 5 Math,Language arts,History
3 4 History
3 5 History,Language arts
4 5 History,Science
10 rows selected.SY. -
Line 390 Under the (Insert into SALES_TRADEIN Table)
I need to insert (TradeIn_1_VIN) Values If there is no values in (TradeIn_1_VIN) then i have to insert (TradeIn_2_VIN) values to the (SALES_TRADEIN) Table.
After i run then below script only (TradeIn_2_VIN) values are get inserted in the table. (TradeIn_1_VIN) are not getting loaded in to the table.
I think there is the problem from Line No (404 to 414) Please help me change those particular lines to insert (TradeIn_1_VIN) Values also.If there is no details then (TradeIn_2_VIN) need to be inserted.
-- =============================================
-- Stored Procedure for Flatfile_Sales
-- =============================================
USE [IconicMarketing]
---==========Sales_Cursor
--USE [IconicMarketing]
--GO
DECLARE
@FileType
varchar(50),
@ACDealerID
varchar(50),
@ClientDealerID
varchar(50),
@DMSType
varchar(50),
@DealNumber
varchar(50),
@CustomerNumber
varchar(50),
@CustomerName
varchar(50),
@CustomerFirstName
varchar(50),
@CustomerLastName
varchar(50),
@CustomerAddress
varchar(50),
@CustomerCity
varchar(50),
@CustomerState
varchar(50),
@CustomerZip
varchar(50),
@CustomerCounty
varchar(50),
@CustomerHomePhone
varchar(50),
@CustomerWorkPhone
varchar(50),
@CustomerCellPhone
varchar(50),
@CustomerPagerPhone
varchar(50),
@CustomerEmail
varchar(50),
@CustomerBirthDate
varchar(50),
@MailBlock
varchar(50),
@CoBuyerName
varchar(50),
@CoBuyerFirstName
varchar(50),
@CoBuyerLastName
varchar(50),
@CoBuyerAddress
varchar(50),
@CoBuyerCity
varchar(50),
@CoBuyerState
varchar(50),
@CoBuyerZip
varchar(50),
@CoBuyerCounty
varchar(50),
@CoBuyerHomePhone
varchar(50),
@CoBuyerWorkPhone
varchar(50),
@CoBuyerBirthDate
varchar(50),
@Salesman_1_Number
varchar(50),
@Salesman_1_Name
varchar(50),
@Salesman_2_Number
varchar(50),
@Salesman_2_Name
varchar(50),
@ClosingManagerName
varchar(50),
@ClosingManagerNumber
varchar(50),
@F_AND_I_ManagerNumber
varchar(50),
@F_AND_I_ManagerName
varchar(50),
@SalesManagerNumber
varchar(50),
@SalesManagerName
varchar(50),
@EntryDate
varchar(50),
@DealBookDate
varchar(50),
@VehicleYear
varchar(50),
@VehicleMake
varchar(50),
@VehicleModel
varchar(50),
@VehicleStockNumber
varchar(50),
@VehicleVIN
varchar(50),
@VehicleExteriorColor
varchar(50),
@VehicleInteriorColor
varchar(50),
@VehicleMileage
varchar(50),
@VehicleType
varchar(50),
@InServiceDate
varchar(50),
@HoldBackAmount
varchar(50),
@DealType
varchar(50),
@SaleType
varchar(50),
@BankCode
varchar(50),
@BankName
varchar(50),
@SalesmanCommission
varchar(50),
@GrossProfitSale
varchar(50),
@FinanceReserve
varchar(50),
@CreditLifePremium
varchar(50),
@CreditLifeCommision
varchar(50),
@TotalInsuranceReserve
varchar(50),
@BalloonAmount
varchar(50),
@CashPrice
varchar(50),
@AmountFinanced
varchar(50),
@TotalOfPayments
varchar(50),
@MSRP varchar(50),
@DownPayment
varchar(50),
@SecurityDesposit
varchar(50),
@Rebate
varchar(50),
@Term varchar(50),
@RetailPayment
varchar(50),
@PaymentType
varchar(50),
@RetailFirstPayDate
varchar(50),
@LeaseFirstPayDate
varchar(50),
@DayToFirstPayment
varchar(50),
@LeaseAnnualMiles
varchar(50),
@MileageRate
varchar(50),
@APRRate
varchar(50),
@ResidualAmount
varchar(50),
@LicenseFee
varchar(50),
@RegistrationFee
varchar(50),
@TotalTax
varchar(50),
@ExtendedWarrantyName
varchar(50),
@ExtendedWarrantyTerm
varchar(50),
@ExtendedWarrantyLimitMiles
varchar(50),
@ExtendedWarrantyDollar
varchar(50),
@ExtendedWarrantyProfit
varchar(50),
@FrontGross
varchar(50),
@BackGross
varchar(50),
@TradeIn_1_VIN
varchar(50),
@TradeIn_2_VIN
varchar(50),
@TradeIn_1_Make
varchar(50),
@TradeIn_2_Make
varchar(50),
@TradeIn_1_Model
varchar(50),
@TradeIn_2_Model
varchar(50),
@TradeIn_1_ExteriorColor
varchar(50),
@TradeIn_2_ExteriorColor
varchar(50),
@TradeIn_1_Year
varchar(50),
@TradeIn_2_Year
varchar(50),
@TradeIn_1_Mileage
varchar(50),
@TradeIn_2_Mileage
varchar(50),
@TradeIn_1_Gross
varchar(50),
@TradeIn_2_Gross
varchar(50),
@TradeIn_1_Payoff
varchar(50),
@TradeIn_2_Payoff
varchar(50),
@TradeIn_1_ACV
varchar(50),
@TradeIn_2_ACV
varchar(50),
@Fee_1_Name
varchar(50),
@Fee_1_Fee
varchar(50),
@Fee_1_Commission
varchar(50),
@Fee_2_Name
varchar(50),
@Fee_2_Fee
varchar(50),
@Fee_2_Commission
varchar(50),
@Fee_3_Name
varchar(50),
@Fee_3_Fee
varchar(50),
@Fee_3_Commission
varchar(50),
@Fee_4_Name
varchar(50),
@Fee_4_Fee
varchar(50),
@Fee_4_Commission
varchar(50),
@Fee_5_Name
varchar(50),
@Fee_5_Fee
varchar(50),
@Fee_5_Commission
varchar(50),
@Fee_6_Name
varchar(50),
@Fee_6_Fee
varchar(50),
@Fee_6_Commission
varchar(50),
@Fee_7_Name
varchar(50),
@Fee_7_Fee
varchar(50),
@Fee_7_Commission
varchar(50),
@Fee_8_Name
varchar(50),
@Fee_8_Fee
varchar(50),
@Fee_8_Commission
varchar(50),
@Fee_9_Name
varchar(50),
@Fee_9_Fee
varchar(50),
@Fee_9_Commission
varchar(50),
@Fee_10_Name
varchar(50),
@Fee_10_Fee
varchar(50),
@Fee_10_Commission
varchar(50),
@ContractDate
varchar(50),
@InsuranceName
varchar(50),
@InsuranceAgentName
varchar(50),
@InsuranceAddress
varchar(50),
@InsuranceCity
varchar(50),
@InsuranceState
varchar(50),
@InsuranceZip
varchar(50),
@InsurancePhone
varchar(50),
@InsurancePolicyNumber
varchar(50),
@InsuranceEffectiveDate
varchar(50),
@InsuranceExpirationDate
varchar(50),
@InsuranceCompensationDeduction
varchar(50),
@TradeIn_1_InteriorColor
varchar(50),
@TradeIn_2_InteriorColor
varchar(50),
@PhoneBlock
varchar(50),
@LicensePlateNumber
varchar(50),
@Cost varchar(50),
@InvoiceAmount
varchar(50),
@FinanceCharge
varchar(50),
@TotalPickupPayment
varchar(50),
@TotalAccessories
varchar(50),
@TotalDriveOffAmount
varchar(50),
@EmailBlock
varchar(50),
@ModelDescriptionOfCarSold
varchar(50),
@VehicleClassification
varchar(50),
@ModelNumberOfCarSold
varchar(50),
@GAPPremium
varchar(50),
@LastInstallmentDate
varchar(50),
@CashDeposit
varchar(50),
@AHPremium
varchar(50),
@LeaseRate
varchar(50),
@DealerSelect
varchar(50),
@LeasePayment
varchar(50),
@LeaseNetCapCost
varchar(50),
@LeaseTotalCapReduction
varchar(50),
@DealStatus
varchar(50),
@CustomerSuffix
varchar(50),
@CustomerSalutation
varchar(50),
@CustomerAddress2
varchar(50),
@CustomerMiddleName
varchar(50),
@GlobalOptOut
varchar(50),
@LeaseTerm
varchar(50),
@ExtendedWarrantyFlag
varchar(50),
@Salesman_3_Number
varchar(50),
@Salesman_3_Name
varchar(50),
@Salesman_4_Number
varchar(50),
@Salesman_4_Name
varchar(50),
@Salesman_5_Number
varchar(50),
@Salesman_5_Name
varchar(50),
@Salesman_6_Number
varchar(50),
@Salesman_6_Name
varchar(50),
@APRRate2
varchar(50),
@APRRate3
varchar(50),
@APRRate4
varchar(50),
@Term2
varchar(50),
@SecurityDeposit2
varchar(50),
@DownPayment2
varchar(50),
@TotalOfPayments2
varchar(50),
@BasePayment
varchar(50),
@JournalSaleAmount
varchar(50),
@IndividualBusinessFlag
varchar(50),
@InventoryDate
varchar(50),
@StatusDate
varchar(50),
@ListPrice
varchar(50),
@NetTradeAmount
varchar(50),
@TrimLevel
varchar(50),
@SubTrimLevel
varchar(50),
@BodyDescription
varchar(50),
@BodyDoorCount
varchar(50),
@TransmissionDesc
varchar(50),
@EngineDesc
varchar(50),
@TypeCode
varchar(50),
@SLCT2
varchar(50),
@DealDateOffset
varchar(50),
@AccountingDate
varchar(50),
@CoBuyerCustNum
varchar(50),
@CoBuyerCell
varchar(50),
@CoBuyerEmail
varchar(50),
@CoBuyerSalutation
varchar(50),
@CoBuyerPhoneBlock
varchar(50),
@CoBuyerMailBlock
varchar(50),
@CoBuyerEmailBlock
varchar(50),
@RealBookDate
varchar(50),
@CoBuyerMiddleName
varchar(50),
@CoBuyerCountry
varchar(50),
@CoBuyerAddress2
varchar(50),
@CoBuyerOptOut
varchar(50),
@CoBuyerOccupation
varchar(50),
@CoBuyerEmployer
varchar(50),
@Country
varchar(50),
@Occupation
varchar(50),
@Employer
varchar(50),
@Salesman2Commission
varchar(50),
@BankAddress
varchar(50),
@BankCity
varchar(50),
@BankState
varchar(50),
@BankZip
varchar(50),
@LeaseEstimatedMiles
varchar(50),
@AFTReserve
varchar(50),
@CreditLifePrem
varchar(50),
@CreditLifeRes
varchar(50),
@AHRes
varchar(50),
@Language
varchar(50),
@BuyRate
varchar(50),
@DMVAmount
varchar(50),
@Weight
varchar(50),
@StateDMVTotFee
varchar(50),
@ROSNumber
varchar(50),
@Incentives
varchar(50),
@CASS_STD_LINE1
varchar(50),
@CASS_STD_LINE2
varchar(50),
@CASS_STD_CITY
varchar(50),
@CASS_STD_STATE
varchar(50),
@CASS_STD_ZIP
varchar(50),
@CASS_STD_ZIP4
varchar(50),
@CASS_STD_DPBC
varchar(50),
@CASS_STD_CHKDGT
varchar(50),
@CASS_STD_CART
varchar(50),
@CASS_STD_LOT
varchar(50),
@CASS_STD_LOTORD
varchar(50),
@CASS_STD_URB
varchar(50),
@CASS_STD_FIPS
varchar(50),
@CASS_STD_EWS
varchar(50),
@CASS_STD_LACS
varchar(50),
@CASS_STD_ZIPMOV
varchar(50),
@CASS_STD_Z4LOM
varchar(50),
@CASS_STD_NDIAPT
varchar(50),
@CASS_STD_NDIRR
varchar(50),
@CASS_STD_LACSRT
varchar(50),
@CASS_STD_ERROR_CD
varchar(50),
@NCOA_AC_ID
varchar(50),
@NCOA_COA_ADDSRC
varchar(50),
@NCOA_COA_MATCH
varchar(50),
@NCOA_COA_MOVTYP
varchar(50),
@NCOA_COA_DATE
varchar(50),
@NCOA_COA_DELCD
varchar(50),
@NCOA_COA_RTYPE
varchar(50),
@NCOA_COA_RTNCD
varchar(50),
@NCOA_COA_LINE1
varchar(50),
@NCOA_COA_LINE2
varchar(50),
@NCOA_COA_CITY
varchar(50),
@NCOA_COA_STATE
varchar(50),
@NCOA_COA_ZIP
varchar(50),
@NCOA_COA_ZIP4
varchar(50),
@NCOA_COA_DPBC
varchar(50),
@NCOA_COA_CHKDGT
varchar(50),
@NCOA_COA_CART
varchar(50),
@NCOA_COA_LOT
varchar(50),
@NCOA_COA_LOTORD
varchar(50),
@NCOA_COA_URB
varchar(50),
@NCOA_COA_Z4LOM
varchar(50),
@NCOA_COA_ACTION
varchar(50),
@NCOA_COA_QNAME
varchar(50),
@NCOA_DPV_AA
varchar(50),
@NCOA_DPV_A1
varchar(50),
@NCOA_DPV_BB
varchar(50),
@NCOA_DPV_CC
varchar(50),
@NCOA_DPV_M1
varchar(50),
@NCOA_DPV_M3
varchar(50),
@NCOA_DPV_N1
varchar(50),
@NCOA_DPV_P1
varchar(50),
@NCOA_DPV_P3
varchar(50),
@NCOA_DPV_RR
varchar(50),
@NCOA_DPV_R1
varchar(50),
@NCOA_DPV_STATUS
varchar(50),
@NCOA_DPV_F1
varchar(50),
@NCOA_DPV_G1
varchar(50),
@NCOA_DPV_U1
varchar(50),
@myerror
varchar(500),
@SalesID
int,
@errornumber int,
@errorseverity varchar(500),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000);
DECLARE Sales_Cursor CURSOR FOR
SELECT * from FLATFILE_SALES;
OPEN Sales_Cursor;
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
--===============================================================================
-- ****************** insert into Sales Table ***********
BEGIN TRY
INSERT INTO Sales
IconicDealerID,
DealNumber,
CustomerNumber,
DMSType,
ContractDate
VALUES (@ClientDealerID,@DealNumber,@CustomerNumber,@DMSType,@ContractDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
@errornumber ,
@errorseverity ,
@errorstate,
@errorprocedure,
@errorline,
@errormessage);
END CATCH
PRINT @errornumber;
PRINT @errorseverity;
PRINT @errorprocedure;
PRINT @errorline;
PRINT @errormessage;
PRINT @errorstate;
set @myerror = @@ERROR;
-- This PRINT statement prints 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
PRINT N'Error = ' + @myerror;
set @SalesID = scope_identity();
PRINT @SalesID;
--================================================================================
--Insert into SALES_TRADEIN Table
BEGIN TRY
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is not null then @TradeIn_2_VIN end,
case when @TradeIn_1_Make is not null then @TradeIn_2_Make end,
case when @TradeIn_1_Model is not null then @TradeIn_2_Model end,
case when @TradeIn_1_ExteriorColor is not null then @TradeIn_2_ExteriorColor end,
case when @TradeIn_1_Year is not null then @TradeIn_2_Year end,
case when @TradeIn_1_Mileage is not null then @TradeIn_2_Mileage end,
case when @TradeIn_1_Gross is not null then @TradeIn_2_Gross end,
case when @TradeIn_1_Payoff is not null then @TradeIn_2_Payoff end,
case when @TradeIn_1_ACV is not null then @TradeIn_2_ACV end,
case when @TradeIn_1_InteriorColor is not null then @TradeIn_2_InteriorColor end
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
END CATCHThis is what I've understood from your question. You want to replace @TradeIn_2_VIN value if @TradeIn_1_VIN
is NULL, else the value of @TradeIn_1_VIN.
If this is the requirement then, your CASE statement is missing ELSE part. You can re-write this as below
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN
ELSE @TradeIn_1_VIN end,
or simply you can replace the CASE statement with the below
COALESCE function,
COALESCE(@TradeIn_1_VIN, @TradeIn_2_VIN),
Krishnakumar S -
How to insert a blank value in not nul column using transform activity
can anyone help me on how to insert blank values in a not null column using transform activity or however possible..This is a requirement in my project ..
vidya
In DB adapter or-mappings.xml , did you made any changes. If not the open that file in any notepad editor and change the following
<attribute-mapping xsi:type="direct-mapping">
<attribute-name>director</attribute-name>
<field table="MYTABLE" name="MAKE_IT_BLANK_NOT_NULL" xsi:type="column"/>
<attribute-classification>java.lang.String</attribute-classification>
</attribute-mapping>You can try to add this:
<attribute-mapping xsi:type="direct-mapping">
<attribute-name>director</attribute-name>
<field table="MYTABLE" name="MAKE_IT_BLANK_NOT_NULL" xsi:type="column"/>
<null-value></null-value>
<attribute-classification>java.lang.String</attribute-classification>
</attribute-mapping>Refer below link for details
Re: Insertion of Blank value to a Not Null varchar column in SQL server table
Thanks
AJ -
I am unable to create a table using procedure..
Hi everyone,
I have given CREATE ANY TABLE privilege to user A and wants to insert data into TAB1 in schema B using a procedure "INSERT INTO B.TAB1 AS SELECT * FROM A.TAB1" but it shows the message--
PL/SQL: ORA-01031: insufficient privileges
Which privilege user A need to do the above task.
Thanks,
AbhijeetSQL> create user a identified by a;
SQL>create user b identified by b;
SQL> grant connect,resource to a;
Grant succeeded.
SQL> grant connect,resource to b;
Grant succeeded.
SQL> grant create any table to a;
Grant succeeded.
SQL> conn a/a
Connected.
SQL> create table tab1 (id number);
Table created.
SQL> insert into tab1 values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> conn b/b
Connected.
SQL> create table tab1 (id number);
Table created.
SQL> insert into b.tab1 select * from tab1;
insert into b.tab1 select * from tab1
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> grant insert any table to a;
Grant succeeded.
SQL> conn a/a
Connected.
SQL> insert into b.tab1 select * from tab1;
1 row created.
So you need to grant “*insert any table* “ privileges to a;
regards
Liakat hossain -
I have a mpp screen for a cd library management system (we are practicing on it).
We have a main screen where a user should enter the enteries and while clicking a add button it should be inserted in a table, Here the problem rises the table name are ztransaction and zstatus.The fields in mpp are cdid,customerid,transaction id,date of issue and duedate.Now after entering all the values on clicking add button it should be inserted to database table ztransaction and the field cdid alone should be inserted both in ztransaction and zstatus.
Thank youHi Raghuram R G,
Check for Primary key and foreign key in the Database table??? Because of this it was not inserting...check and confirm??
Regds,
Vijay SR -
From the Parent Table i need to insert rows which are all under this column {(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN) } into SALES_TRADEIN Table .
I have used the below Query,
But it reads only (TradeIn _1_Vin) Column in the SALES_TRADEIN table rest 2 records got skipped..
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN else @TradeIn_1_VIN end,
case when @TradeIn_1_Make is null then @TradeIn_2_Make else @TradeIn_1_Make end,
case when @TradeIn_1_Model is null then @TradeIn_2_Model else @TradeIn_1_Model end,
case when @TradeIn_1_ExteriorColor is null then @TradeIn_2_ExteriorColor else @TradeIn_1_ExteriorColor end,
case when @TradeIn_1_Year is null then @TradeIn_2_Year else @TradeIn_1_Year end,
case when @TradeIn_1_Mileage is null then @TradeIn_2_Mileage else @TradeIn_1_Mileage end,
case when @TradeIn_1_Gross is null then @TradeIn_2_Gross else @TradeIn_1_Gross end,
case when @TradeIn_1_Payoff is null then @TradeIn_2_Payoff else @TradeIn_1_Payoff end,
case when @TradeIn_1_ACV is null then @TradeIn_2_ACV else @TradeIn_1_ACV end,
case when @TradeIn_1_InteriorColor is null then @TradeIn_2_InteriorColor else @TradeIn_1_InteriorColor end
END TRY
Actually my problem is
If [(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN)] these 3 columns have details i need all the 3 columns details need to be read to SALES_TRADEIN table.
Suppose if we have data only in [(TradeIn_1_VIN),(TradeIn_2_VIN)] then these column details need to loaded in the SALES_TRADEIN table.
If any columns are blank no problem it can move next process.
Please help me change those particular lines to insert all the 3 records (TradeIn_1_VIN) (TradeIn_2_VIN) (TradeIn_3_VIN) in to the table.From SQL2008 on, besides INSERT-SELECT, and INSERT-EXEC, the INSERT-VALUES form of the insert command is improved. It can insert multiple rows like this:
INSERT INTO my_table(MyColA, MyColB)
VALUES
(1, 1),
(2, 2),
(3, 3)
You could also use that in SELECTs, like this:
SELECT *
FROM
( VALUES (1,2), (3,4)
) t(a, b) -
Retrieving lookup field values from a main table using MDM JAVA APIs
Hi all,
am trying to retrieve the main table data...., i could able to retrieve all the data except lookup field values..., iam facing some runtime exceptions and i dont know why exactly it is throwing this exception..., i pasted piece of code where exactly the error is and the exception also.
in the below sode i set some result set definitions and passing them to retrieveLimitedRecordsCommand. it is showing some exception at retrieveLimitedRecordsCommand.execute(); command.
//*** Code ***//
supportingMainResultDefinitions = new ResultDefinition[] { rdQual ,rdFlat, rdqFlat };
retrieveLimitedRecordsCommand.setResultDefinition(rd);
retrieveLimitedRecordsCommand.setSearch(new Search(tableId));
retrieveLimitedRecordsCommand.setSession(sessionId);
retrieveLimitedRecordsCommand.setSupportingResultDefinitions(supportingMainResultDefinitions);
try {
retrieveLimitedRecordsCommand.execute();
PrintRecords.toConsole(retrieveLimitedRecordsCommand.getRecords());
} catch (CommandException e) {
e.printStackTrace();
//*** Below is the Exception raised ***//
java.lang.UnsupportedOperationException: Unexpected field type -1
at com.sap.mdm.internal.schema.PropertiesHelper.createField(PropertiesHelper.java:274)
at com.sap.mdm.internal.schema.PropertiesHelper.convertFrom(PropertiesHelper.java:281)
at com.sap.mdm.internal.data.RecordMetadata.<init>(Unknown Source)
at com.sap.mdm.internal.data.RecordsLoader.<init>(Unknown Source)
at com.sap.mdm.internal.data.RecordsLoader.<init>(Unknown Source)
at com.sap.mdm.internal.data.RecordResultSetHelper.convertFrom(Unknown Source)
at com.sap.mdm.data.commands.RetrieveLimitedRecordsCommand.execute(Unknown Source)
at com.sap.mdm.apitutorial.lesson2.RecordsDisplay.getDisplayRecords(RecordsDisplay.java:303)
at org.apache.jsp.Sample_jsp._jspService(Sample_jsp.java:190)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
If anyonw worked on this concept..., please provide me the solution
Regards
Praveen kWhich version are you using? Can you please try and narrow down to the offending field? You can do this by limiting the fields you provide to ResultDefinition.
-
Insert,update and delete data in a table using webdynpro for abap
Dear All,
I have a requirement to create a table allowing the user to add rows in it and update a row as well as delete a row from that table.To do this I guess I have to make use of ALV.But using ALV I am not able to enter data to a table where as I can make a column editable delete a row etc. please guide me to perform these operations(insert,update and delete) on table.
Thanks,
Reddy.Hi Sridhar,
By using ALV you can do all insert delete etc things. if you want to edit i mean you can yenter data in ALV.
Check this...
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1
Editing alv in web dynpro
editing rows in alv reports
Re: editing rows and columns in alv reports in webdynpro abap
Cheers,
Kris. -
Cannot add field to value section of PowerPivot table- using TechNet tutorial
I am doing the MS TechNet tutorial for PowerPivot and using the sample files. Everything has worked until I got to the Create a PivotTable tutorial. when I try to add the SalesAmount field to the values section of the grid, it gives me the error
"Could not add the field "SalesAmount" to the PivotTable. Please ensure the field exists and is calculated, and try refreshing the PivotTable."
I refreshed the data several times, the field exists, but I don't know how to recalculate. I can place other field and even the SalesAmount field into the Rows section with no problem. I just cannot get it to go into the Values section without
the error. The data type is currency. Can't figure out why it doesn't work.
I didn't notice before, but every row of the table named FactSales in the PowerPivot window, which includes the SalesAmount field, has the exact same data.
Tutorial is at
http://technet.microsoft.com/en-us/library/ee835638.aspx
Sample data is at http://powerpivotsampledata.codeplex.com/
Please tell me if I have posted this question on the wrong forum. There has been 43 views, but no replies. Please also let me know if I have asked the question incorrectly.
Thank youSorry Linda for the long delay- hope you're still around. I received no errors on import. All of the preceding tutorials with as laid out. I have deleted the PivotTable several times, recreated it, and received the same error as I described
above. I have not done what you suggest and I will. I guess I was thinking it was a bug or problem with the sample data, but since you can do it without problem, it is obviously on my end.
Thanks again. I'll do it from the beginning tomorrrow and report what happens. -
Internal table value checking in custom table using SQL...
I have a table which has following fields:
X1 TABLE (ZCONfig custom table)
LIFNR land1
123 br
234 br
456 br
567 Gr
and
X2 TABLE: (Internal table)
LIFNR:
234
567
123
Now I want to see if all the field values of LIFNR in internal table X2 (X2-LIFNR) are present in X1 or not.
Raise error if it is not.
How do I do this using SQL ? I guess I have to use read statement.
Please help. Points will be awarded.
Thanks.
RegardsHi Tushar,
1 Ya u are right , we need to use READ statement.
2. Populate X1 (all records)
in an internal table.
3. Then Loop at X2
and compare with X1.
( u can also keep an extra field in X2
of type c, so that if a record is found,
mark it as X )
4. try this code (just copy paste)
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
present TYPE c,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = 'X000'.
APPEND itab.
SELECT * FROM t001 INTO TABLE t001.
LOOP AT itab.
READ TABLE t001 with key bukrs = itab-bukrs.
IF sy-subrc = 0.
itab-present = 'X'.
MODIFY itab.
ENDIF.
ENDLOOP.
BREAK-POINT.
regards,
amit m.
Message was edited by: Amit Mittal
Maybe you are looking for
-
Multiprovider using 0pur_c04 and 0figl_o02
HI all, Iam actually designing purchase order to payment report, the data of which is spread across 0pur_c04 & 0figl_o02, i have mapped the purchase order number of 0pur_c04 with that of purchase order number of 0figl_o02, but the problem i
-
I tried to create a US account, but i need a credit card with an american address and i dont have one. This has only been happening in the last week or so. I am still clicking the app store button on my ipad. Help please.
-
After i connected my iphone to my computer to upload some pictures, the couple of apps that i had synched to my itunes, later i noticed that this deleted them from my iphone, therefore i re-connected my phone, dragged that apps back onto my phone and
-
Can I use iAd in my flash package?
Hello. I start learning to make iOS application using adobe flash. I will make a free application. So I need iAd in my application. Can I use iAd in my flash package?
-
I updated by 4S phone and the keyboard is responding very slowly - any advice?
I updated by 4S phone and the keyboard is responding very slowly - any advice?