Inserting a table in a table

I want to insert a table in one of the cells of another table in Pages. Is that possible at all? Every time I try to insert a table, it covers over the entire roll of cells and I can't resize it to have it where I want it. I have tried to create the table outside of the original one and drag it to where I want it to be in the table, but it doesn't work either. Some help pls?

df,
You can nest tables in TextEdit, but not in Pages. If your document is simple, TextEdit might be sufficient. In Pages, you could make the inner table as a separate document, print it to PDF and Paste it into the outer table as a graphic.
Jerry
Message was edited by: Jerrold Green1

Similar Messages

Can we insert data directly in standard table

hi
how can we insert data in standard table directly.
pls reply urgently.

Hi sapna yes u can insert data to the SAP tables, as shown below...
use the table mara in the place of m
REPORT ZTEST_INSERT.
TABLES: <m>.
DATA: wa_m TYPE <m>.
wa_m-ernam = 'ZTEST'.
insert into <m> VALUES wa_m.
if sy-subrc = 0.
WRITE / 'Records inserted Successfully'.
ENDIF.
reward if usefull,
Vishnu. R
Edited by: vishnu ramanathan on Sep 18, 2008 2:17 PM

Can not insert or update [TABLE] from internal table in method

I've faced a problem with OO abap. I've tried to insert into [ TABLE ] from internal table, but i've got error msg after i compiled.
"An explicit work area is necessary in the OO context. Use "INSERT wa INTO [TABLE] itab""
After i changed to loop in work area and INSERT INTO [TABLE] VALUES gw_data., everything is fine, can compile and run.
This is error code.
METHOD set_data_to_table.
    REFRESH gi_data.
    CLEAR gi_data.
    IF gi_file[] IS NOT INITIAL.
* Set data for modify table
      LOOP AT gi_file INTO gw_file.
        MOVE-CORRESPONDING gw_file TO gw_data.
        me->conversion_input( EXPORTING im_vendor = gw_data-vendor
                              CHANGING ch_vendor = gw_data-vendor ).
        APPEND gw_data TO gi_data.
      ENDLOOP.
      INSERT [TABLE] FROM TABLE gi_data.
*      LOOP AT gi_data INTO gw_data.
*        INSERT INTO [TABLE] VALUES gw_data.
*        IF sy-subrc = 0.
*          COMMIT WORK.
*        ELSE.
*          ROLLBACK WORK.
*        ENDIF.
*      ENDLOOP.
    ELSE.
      MESSAGE 'No data found' TYPE 'I'.
    ENDIF.
ENDMETHOD.                    "set_data_to_table

Hi Matthew,
I think there is no difference in database insert between OO and non-OO.
The correct syntax according to ECC600 online documentation is
[Inserting Several Lines|http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/eb3a6d358411d1829f0000e829fbfe/content.htm]
To insert several lines into a database table, use the following:
INSERT target FROM TABLE itab \[ACCEPTING DUPLICATE KEYS].
This writes all lines of the internal table itabto the database table in one single operation. If one or more lines cannot be inserted because the database already contains a line with the same primary key, a runtime error occurs. You can prevent the runtime error occurring by using the addition ACCEPTING DUPLICATE KEYS.
Whenever you want to insert more than one line into a database table, it is more efficient to work with an internal table than to insert the lines one by one.
I think the syntax
INSERT my_dbtable FROM TABLE gi_data.
should work, your suggestion may lead to syntax error.
Regards,
Clemens

Insert / update data to a table through DBLINK (oracle)

I try to insert / update a table from one instance of oracle database to another one through oracle dblink, get following error:
java.sql.SQLException: ORA-01008: not all variables bound
ORA-02063: preceding line from MYLINK
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2152)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2035)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2876)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:609)
The same code to insert / update the exact same table in local instance works fine.No any binding problem. So i am pretty sure all ? mark in SQL are set with some value before sending to Oracle.
Someone please advise what is possible problem. Db link is not set correctly? or we can not update remote table by dblink.
By the way i can do insert / update from TOAD to the remote table through DBLINK. Problem happens only in Java code.
thanks!
Gary

dblink links from one database instance to another.
So it is certainly a source of possible problems when it works on one database and not another.
You should start by looking at the dblink and it possible testing it in the database not via java.
Note as well that that error suggests that it is coming from the Oracle database. I believe if you had a bind parameter problem in your java code that the error would come from the driver. But that is a guess on my part.

Inserting data from one table into another table using PL/SQL

HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id)
          VALUES
               (x);
INSERT INTO riverside2
               (charac_id)
          VALUES
               (y);
      END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);
      END zorgs_gorfs;
/can someone kindly sort me out

modify this sql
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);as
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick.

Using Insert and Delete icons in table control wizard.

Can anyone tell me how to perform a new row insertion or deletion in a table created using the table control wizard.
I see there is a form fcode_insert_row and fcode_delete_row, but dont know how to call them and what parameters to pass and all.
Since iam new to SAP-ABAP, some code samples will be a great help.
Thanks to all in advance.

Hi Lavanya ,
You have to add the icons personally in the table control.. . Put fcode for addition button as INSE and delete as DELE ..coding will be already thr in the wizard no need to anything just add icons in the table control by selecting from f4 help on icons option of screen.
Thanks,
Vishnu .

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How to identify date & time of insertion of rows in a table

Hi,
Is it possible to identify the date & time of insertion of rows in a table?
for example:
Table name: emp
I have rows like this
emp_code name dept
pr01 ram edp
ac05 gowri civil
pr02 sam pro
i want to know the date and time of the insertion this( ac05 gowri civil).
Could you please help me.....
Thanks in advance....

psram wrote:
sorry for the confusion. I dont want to store date and time. I said that for example only.
I have table which consists of thousands of rows. I want to know the insertion date & time of a particular row.
Is it possible?So, if I have a table that stores a load of employee numbers, do you think I could get the database to tell me their names?
If you don't store the information, you can't query the information.
Ok, there are some dribbs and drabbs of information available from the back end of the database via the SCN's, Archive Logs etc., but those sort of things disappear or get overwritten as time goes by. The only way to know the information it to ensure you store it in the first place.
So, in answer to your question, No, there isn't a true and reliable way to get the data/time that rows were inserted into the table, unless you have chosen to store it alongside the data.

Insert multiple records into a table(Oracle 9i) from a single PHP statement

How can I insert multiple records into a table(Oracle 9i) from a single PHP statement?
From what all I've found, the statement below would work if I were using MySQL:
     insert into scen
     (indx,share,expire,pitch,curve,surface,call)
     values
     (81202, 28, 171, .27, 0, 0, 'C' ),
     (81204, 28, 501, .25, 0, 0, 'C' ),
     (81203, 17, 35, .222, 0, 0, 'C' ),
     (81202, 28, 171, .27, 2, 0, 'C' ),
     (81204, 28, 501, .20, 0, 1, 'C' ),
     (81203, 28, 135, .22, 1, 0, 'C' )
The amount of records varies into the multiple-dozens. My aim is to utilize the power of Oracle while avoiding the i/o of dozens of single-record inserts.
Thank you,
Will

You could look at the INSERT ALL statement found in the documentation here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_913a.htm#2133161
My personal opinion is that you probably won't see any benefit because under the hood I think Oracle will still be doing single row inserts. I could be wrong though.
The only way to confirm was if you did a test of multiple inserts vs an INSERT ALL, that is if the INSERT ALL met your requirements.
HTH.

Insert records from a single table to two related tables

DB - 10G
OS - XP
We have many thousands of comma delimited records that we want to insert into a normalised table structure.
I have created a test dataset that can be found at the end of this post.
I have csv records that look like this;
donald, huey
donald, dewey
donald, louie
And I want the data to be inserted into two separate table like this;
table named PARENTS
pk parent_name
1 donald
Table named CHILDRENS
pk fk child_name
1 1 huey
1 2 dewey
1 3 louie
I constructed an insert statement that looks like this;
INSERT ALL
INTO parents (parent_id, parent_name) VALUES (parents_seq.nextval, parent_name)
INTO children (children_id, parent_id, child_name) VALUES(children_seq.nextval, parents_seq.nextval, child_name )
SELECT parent_name, child_name
FROM sources;
And this resulted in the following;
Table named PARENTS
pk child_name
1 DONALD
2 DONALD
3 DONALD
Table named PARENTS
pk fk child_name
1 1 HUEY
2 2 DEWEY
3 3 LOUIE
Would anyone have any ideas on how I could accomplish this task?
This is some example data;
[code]
DROP SEQUENCE parents_seq;
DROP SEQUENCE sources_seq;
DROP SEQUENCE children_seq;
DROP TABLE sources;
DROP TABLE children;
DROP TABLE parents;
CREATE SEQUENCE PARENTS_SEQ MINVALUE 1 MAXVALUE 1000000000000000000000000000 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE;
CREATE TABLE PARENTS
( PARENT_ID      NUMBER(8) NOT NULL
, PARENT_NAME    VARCHAR2 (50 CHAR) NOT NULL
, CONSTRAINT     PARENTS_PK PRIMARY KEY (PARENT_ID)
create or replace
TRIGGER PARENTS_BI
BEFORE
INSERT OR UPDATE ON PARENTS
FOR EACH ROW BEGIN
IF INSERTING THEN
    IF :NEW.PARENT_ID IS NULL THEN
      SELECT PARENTS_SEQ.nextval INTO :NEW.PARENT_ID FROM dual;
    END IF;
END IF;
END;
CREATE SEQUENCE SOURCES_SEQ MINVALUE 1 MAXVALUE 1000000000000000000000000000 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE;
CREATE TABLE SOURCES
( SOURCE_ID      NUMBER(8) NOT NULL
, PARENT_NAME    VARCHAR2 (50 CHAR) NOT NULL
, CHILD_NAME    VARCHAR2 (50 CHAR) NOT NULL
, CONSTRAINT     SOURCES_PK PRIMARY KEY (SOURCE_ID)
create or replace
TRIGGER SOURCES_BI
BEFORE
INSERT OR UPDATE ON SOURCES
FOR EACH ROW BEGIN
IF INSERTING THEN
    IF :NEW.SOURCE_ID IS NULL THEN
      SELECT SOURCES_SEQ.nextval INTO :NEW.SOURCE_ID FROM dual;
    END IF;
END IF;
END;
INSERT INTO SOURCES (PARENT_NAME, CHILD_NAME) VALUES ('DONALD', 'HUEY');
INSERT INTO SOURCES (PARENT_NAME, CHILD_NAME) VALUES ('DONALD', 'DEWEY');
INSERT INTO SOURCES (PARENT_NAME, CHILD_NAME) VALUES ('DONALD', 'LOUIE');
Commit;
CREATE SEQUENCE CHILDREN_SEQ MINVALUE 1 MAXVALUE 1000000000000000000000000000 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE;
PROMPT *** CREATE TABLE ***
CREATE TABLE CHILDREN
( CHILDREN_ID    NUMBER NOT NULL
, PARENT_ID      NUMBER NOT NULL
, CHILD_NAME     VARCHAR2 (50 CHAR) NOT NULL
, CONSTRAINT     CHILDREN_PK PRIMARY KEY (CHILDREN_ID)
create or replace
TRIGGER CHILDREN_BI
BEFORE
INSERT OR UPDATE ON CHILDREN
FOR EACH ROW BEGIN
IF INSERTING THEN
    IF :NEW.CHILDREN_ID IS NULL THEN
      SELECT CHILDREN_SEQ.nextval INTO :NEW.CHILDREN_ID FROM dual;
    END IF;
END IF;
END;
[code]

Looks like this is one way of achieving it:
insert into parents (parent_name) select distinct parent_name from sources;
select *
from parents;
PARENT_ID              PARENT_NAME
1                      DONALD
insert into children (parent_id, child_name)
select p.parent_id, s.child_name
from sources s
join parents p
    on (s.parent_name = p.parent_name);
select *
from children;
CHILDREN_ID            PARENT_ID              CHILD_NAME
1                      1                      HUEY
2                      1                      DEWEY
3                      1                      LOUIE

Insert multiple rows in a table

Hello Apex expert,
I need help on insert multiple rows. it may look easy but I don't know how to do it.
I have a table (with name found_table) which has these fields: found_ item_id, item_name, current_location, cost_center, tag_number. Also, I have a table (with the name transition) which has these fields: transition_id, found_item_id (FK to found_table), from_location, to_location, From_cost_center, to_cost_center, tag_number.
I have an interactive report on found_table which I would like to add checkbox to all rows of the report. When the user checks any rows and press submit, I would like to send all these selected rows to another page which I have a form on transition table. The user will select a to_location and to_cost_center from this page (by the way from_location and from_cost_center and tag_number is the same as current_location and cost_center, tag_nuber from found_table, which I figured it out how to show those as a default in the new form). Now I want when a user selects the new location and cost center and press submit, all those selected rows be inserted in transition table with new locations.
I read several threads on forum, but I could not find a solution for my problem. I will appreciate your help.
Thanks,
Atousa

Hello again,
I created a report with check box. I also added two selected list at the top of the region to select the location and cost center. Also, there is a transfer button(as submit) to insert the new data to table. Now I need the insert process. I tried different insert process but none of them is working for me:(((
I created an example of what I need to do in the apex that you can take a look and give me some advise. The link is:
What I need to do is:
When a user selects several rows by using checkbox and selects To_LOCATION, and TO_COST_CENTER from selected list, and clicks on transfer, all the data should be insert in to another table with the name transition as follows:
from found table to transition table
found_item_id(pk) found_item_id (fk)
current_location from_location
cost_center from_cost_center
tag_number tag_number
selected list (to_location) to_location
selected list (to_cost_center) to_cost_center
Please help me on that. I appreciated.
Atousa
Edited by: Atousa.M on Jul 21, 2011 10:55 AM

How to insert into more than one table at a time also..

hi,
i am a newbee.
how to insert into more than one table at a time
also
how to get a autoincremented value of an id say transactionid for a particular accountid.
pls assume table as
transactionid accountid
101 50
102 30
103 50
104 35
i want 102 for accountid 30 and 103 for accountid 50.
thank u

@blushadow,
You can only insert into one table at a time. Take a look here :
Re: insert into 2 tables
@Raja,
I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
Insert, extract... ? Can you clarify your job ?
Nicolas.

How to insert 65k row in a table.??

I have 65 K id ( just ID) and I want to insert in to a table AA.
create table aa(
id number(10);
Now I just need to insert 65K id(just ID) in this table.
PLease help me out gurus..
thanks

insert into aa values(1269336);
insert into aa values(1273101);
insert into aa values(1260421);
insert into aa values(1262263);
insert into aa values(1254756);
insert into aa values(1251287);
insert into aa values(1249599);
insert into aa values(1272115);
insert into aa values(1273982);
insert into aa values(1255780);
insert into aa values(1244052);
insert into aa values(1279931);
insert into aa values(1263455);
insert into aa values(1256051);
insert into aa values(1270972);
insert into aa values(1254050);
insert into aa values(1262467);
insert into aa values(1256527);
insert into aa values(1249951);
insert into aa values(1272999);
insert into aa values(1255587);
insert into aa values(1246742);
insert into aa values(1258728);
insert into aa values(1250616);
insert into aa values(1260479);
insert into aa values(1294275);
insert into aa values(1251756);

Inserting data from one table to another table....

Hi DB Gurus,
I have two table like table A in instance X and table B in instance Y. I want to insert data into table A from table B.If data in table B already exist in table A then that should not insert .if data In table B is not present in table A then that data should insert into table A.
please help me to how insert this kind of data.I am trying to insert data by using "insert into" statement.Is it correct way or not. please let me know...
Thanks in advance
Best regards
kumar

Hey There,
"I have two table like table A in instance X and table B in instance Y"
Are these 2 instances sitting in the same db/rac.
if so
insert into x.a
select * from y.b
If the 2 instances are in different databases/racs then i think you can add a linked db into your script.- not 100% about that though.
Dob

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

Files moving to NFS error folder - Could not insert message into duplicate check table

Hi Friends
Have anyone faced this error, could suggest me why.
The CSV Files failed on Sender Channel and moves to NFS error path and in the log it says as below.
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message into duplicate check table. Reason: com.ibm.db2.jcc.am.SqlTransactionRollbackException: DB2 SQL Error

Hi Uma - is that a duplicate file? have you enabled duplicate file check in sender channel?
please check if the below note is applicable
1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration

Inserting a table in a table

Similar Messages

Maybe you are looking for