[package related not upgrade related] xorg-server-kdrive won't compile

The page related to this package suggests that it fails to build except I'm not too sure what to make of the comments - at any rate, it refuses to compile, complaining about something like %.04X not being what the compiler expected it to be or some such - I closed the terminal as soon as it failed >.>
So... how do I compile this?
Also, if you know anything about X in general, please see my related post at http://bbs.archlinux.org/viewtopic.php?pid=432854.
-dav7
Last edited by dav7 (2008-10-12 11:54:46)

Bump?

Similar Messages

  • Latest upgrade of xorg-server seems to have broken amule

    Hi. Is this the right place to inform this kind of things? If it isn't, then I apologize.
    Anyway, I am getting the following when trying to run amule:
    [nacho@gurney ~]$ amule
    Initialising aMule
    Checking if there is an instance already running...
    No other instances are running.
    HTTP download thread started
    The program 'amule' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadAlloc (insufficient resources for operation)'.
    (Details: serial 600 error_code 11 request_code 143 minor_code 5)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the --sync command line
    option to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error() function.)
    pure virtual method called
    Aborted
    [nacho@gurney ~]$ amule --sync
    Initialising aMule
    Checking if there is an instance already running...
    No other instances are running.
    HTTP download thread started
    The program 'amule' received an X Window System error.
    This probably reflects a bug in the program.
    The error was 'BadAlloc (insufficient resources for operation)'.
    (Details: serial 1123 error_code 11 request_code 143 minor_code 5)
    (Note to programmers: normally, X errors are reported asynchronously;
    that is, you will receive the error a while after causing it.
    To debug your program, run it with the --sync command line
    option to change this behavior. You can then get a meaningful
    backtrace from your debugger if you break on the gdk_x_error() function.)
    pure virtual method called
    Aborted
    Until before the last upgrade (which included xorg-server, so I suspect it is related), it was working properly.
    Thanks!

    Take a look at:
    http://bbs.archlinux.org/viewtopic.php?id=42502
    http://bugs.archlinux.org/task/9254?project=1
    A downgrade to xorg-server-1.4.90-3 should solve the problem.

  • Keyboard not working with xorg-server 1.6.1-1 or xkeyboard 1.5-1

    Hello!
    I have a problem with a no working keyboard. It seems like this is a problem related to some of the latest xkeyboard-config or xorg-server versions. This have been a problem some time, but it have been solved by downgrading xkeyboard-config to v1.5-1 and xorg-server to v1.6.1-1.
    I'm booting into runlevel 3. Keyboard is working in the terminal, but when I run startx, the keyboard stops working. The mouse works fine.
    Have tested with an empty xorg.conf file. Then I get a 'no screen found' error. And I have tryed to enable the keyboard entry in xorg.conf. X starts, but no keyboard. Hal is running.
    Any ideas?
    The xorg.conf and rc.conf
    # Copyright 2004 The X.Org Foundation
    Section "ServerLayout"
    Identifier "Laptop"
    Screen 0 "Default" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # InputDevice "EvdevMouse" "CorePointer"
    # Inputdevice "Trackpoint" "SendCoreEvents"
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "True"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    EndSection
    Section "Monitor"
    Identifier "LCD"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "radeon_hd"
    Driver "fglrx"
    EndSection
    Section "Screen"
    Identifier "Default"
    Device "radeon_hd"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1024x768"
    Virtual 2720 1024
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    # /etc/rc.conf - Main Configuration for Arch Linux
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Oslo"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MOD_AUTOLOAD="yes"
    MODULES=(fglrx vboxdrv vboxnetadp acpi_cpufreq cpufreq_ondemand !pcspkr)
    USELVM="no"
    HOSTNAME="ArchT400"
    eth0="dhcp"
    INTERFACES=(!eth0)
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    DAEMONS=(syslog-ng network netfs hal laptop-mode cpufreq crond oss @autowifi @cups @openntpd @hddtemp)
    Last edited by orjanp (2009-08-11 13:07:41)

    Her er Xorg.0.log
    X.Org X Server 1.6.3
    Release Date: 2009-7-31
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux ArchT400 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64
    Build Date: 03 August 2009 08:17:16PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 12 10:39:18 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Laptop"
    (**) |-->Screen "Default" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "radeon_hd"
    (==) No monitor specified for screen "Default".
    Using a default monitor configuration.
    (**) Option "AutoAddDevices" "True"
    (**) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x7540
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:95c4:17aa:210e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    (II) Loading extension XFree86-DRI
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.63.2
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.63.2
    Module class: X.Org Video Driver
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.63.2
    (II) ATI Proprietary Linux Driver Release Identifier: 8.632
    (II) ATI Proprietary Linux Driver Build Date: Jul 2 2009 12:25:51
    (II) Loading PCS database from /etc/ati/amdpcsdb
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 5.0
    (--) Assigning device section with no busID to primary device
    (--) Chipset Supported AMD Graphics Processor (0x95C4) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x154b6d0
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
    (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xcfff0000
    (--) fglrx(0): I/O port at 0x00002000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) fglrx(0): Battery is used
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: M82
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) fglrx(0): Using adapter: 1:0.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (II) fglrx(0): [pcie] 1986048 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (II) fglrx(0): Interrupt handler installed at IRQ 32.
    (II) fglrx(0): IRQ 32 Enabled.
    (II) fglrx(0): RandR 1.2 support is enabled!
    (II) fglrx(0): RandR 1.2 rotation support is enabled!
    (==) fglrx(0): Center Mode is disabled
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
    (II) fglrx(0): Year: 2008 Week: 0
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
    (II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported detailed timing:
    (II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (II) fglrx(0): Supported detailed timing:
    (II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
    (II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
    (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
    (WW) fglrx(0): Unknown vendor-specific block f
    (II) fglrx(0): LP141WP2-TLB1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0030ae364000000000
    (II) fglrx(0): 00120103801e1378ea4b859257568a28
    (II) fglrx(0): 20505400000001010101010101010101
    (II) fglrx(0): 010101010101b027a08051841a303020
    (II) fglrx(0): 360030be100000197021a09851841a30
    (II) fglrx(0): 3020360030be100000190000000f0095
    (II) fglrx(0): 0a32950a28191900320c3c01000000fe
    (II) fglrx(0): 004c503134315750322d544c4231001f
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Output LCD using monitor section LCD
    (II) fglrx(0): Output DFP1 has no monitor section
    (II) fglrx(0): Output CRT1 has no monitor section
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): Output LCD connected
    (II) fglrx(0): Output DFP1 disconnected
    (II) fglrx(0): Output CRT1 disconnected
    (II) fglrx(0): Using user preference for initial modes
    (II) fglrx(0): Output LCD using initial mode 1440x900
    (++) fglrx(0): DPI set to (96, 96)
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (==) fglrx(0): NoDRI = NO
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Finished Initialize PPLIB!
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (WW) fglrx(0): could not detect X server version (query_status=-1)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xcd000
    (II) fglrx(0): [drm] mapped SAREA 0xcd000 to 0x7f3e01f4b000
    (II) fglrx(0): [drm] framebuffer handle = 0xce000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.63.2
    (II) fglrx(0): Date: Jul 2 2009
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.30-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: yes
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x000cf000
    (II) fglrx(0): Display width adjusted to to 2816 due to alignment constraints
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0106a000
    (II) fglrx(0): FBMM initialized for area (0,0)-(2816,1528)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(2816,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 2816 x 504
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (II) fglrx(0): DPMS enabled
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 94
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Driver provided ScreenToScreenBitBlt replacement
    Driver provided FillSolidRects replacement
    (II) fglrx(0): GLESX is enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    (II) Loading extension AMDXVOPL
    (II) fglrx(0): UVD2 feature is available
    (II) fglrx(0): Enable composite support successfully
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using HW cursor of display infrastructure!
    (==) fglrx(0): Using software cursor
    (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Enable the clock gating!
    (II) fglrx(0): Setting screen physical size to 381 x 238
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 2.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) ThinkPad Extra Buttons: always reports core events
    (**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
    (II) ThinkPad Extra Buttons: Found keys
    (II) ThinkPad Extra Buttons: Configuring as keyboard
    (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (**) TPPS/2 IBM TrackPoint: always reports core events
    (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
    (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
    (II) TPPS/2 IBM TrackPoint: Configuring as mouse
    (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
    (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    (**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
    (**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
    (**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event9"
    (II) Logitech USB Receiver: Found 20 mouse buttons
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Configuring as mouse
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech USB Receiver: (accel) filter chain progression: 2.00
    (**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech USB Receiver: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event10"
    (II) Logitech USB Receiver: Found 1 mouse buttons
    (II) Logitech USB Receiver: Found scroll wheel(s)
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) Logitech USB Receiver: Adding scrollwheel support
    (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us,no"
    (**) Option "xkb_options" "grp:alt_shift_toggle"
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    (II) fglrx(0): EDID vendor "LEN", prod id 16438
    (II) fglrx(0): Printing DDC gathered Modelines:
    (II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
    (II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
    Last edited by orjanp (2009-08-12 08:43:13)

  • Package zzz not found in import (server side classes)

              Hi,
              I'm trying to use the "Web Application" feature in WL 5.10
              (with no service pack). My application contains a couple of
              servlets, a couple of server side classes, and a couple of
              jsp pages.
              I created the WEB-INF\classes directory structure both in
              public_html and in my application's root directory. I
              modified setEnv.bat to contain the two directories in
              ClassPath and compilation of my servlets from the command
              line completes OK (the servlets import a package that sits in
              public_html\WEB-INF\classes).
              However, when I try to import the same package from a jsp
              file, I get the "package zzz not found in import" error
              message. The trace shows that the java compiler invoked
              after the servlet has been generated does not contain
              public_html\WEB-INF\classes in the ClassPath, but contains
              public_html\my_app\WEB-INF\classes.
              How can I specify that the java compiler should look under
              public_html\WEB-INF\classes for server side classes? Is there
              another solution and am I even using the right approach?
              Thanks,
              Vladimir
              

              Vladimir wrote:
              >
              > Hi,
              >
              > I'm trying to use the "Web Application" feature in WL 5.10
              > (with no service pack). My application contains a couple of
              You should install the service packs, your problem will probably
              disappear then.
              Web Apps are better supported with service packs.
              > servlets, a couple of server side classes, and a couple of
              > jsp pages.
              >
              > I created the WEB-INF\classes directory structure both in
              > public_html and in my application's root directory. I
              > modified setEnv.bat to contain the two directories in
              > ClassPath and compilation of my servlets from the command
              > line completes OK (the servlets import a package that sits in
              > public_html\WEB-INF\classes).
              >
              > However, when I try to import the same package from a jsp
              > file, I get the "package zzz not found in import" error
              > message. The trace shows that the java compiler invoked
              > after the servlet has been generated does not contain
              > public_html\WEB-INF\classes in the ClassPath, but contains
              > public_html\my_app\WEB-INF\classes.
              >
              > How can I specify that the java compiler should look under
              > public_html\WEB-INF\classes for server side classes? Is there
              > another solution and am I even using the right approach?
              >
              Setting the WEBLOGIC_CLASSPATH should do the trick. Look in weblogic
              start file (On NT startWeblogic.cmd)
              > Thanks,
              > Vladimir
              

  • Prestage package status not updating on the server

    I have been successful in extracting other prestage packages on DP but for 2 packages, it extract them fine as per the logs and sends the status to the MP as well but the server doesnt reflect the updated status.
    prestagecontent.log shows the following
    Management Point: 'http://<MP Name>'      
    Site Code: '<Sitecode>' PrestageContent            
    DP server: '<DP server name>'         
    NAL Path: ["Display=\\<DP server name>\"]MSWNET:["SMS_SITE=<sitecode>"]\\<DP server name>\'                PrestageContent            
    Set authenticator in transport    PrestageContent            
    Sent <packageID> package state message to site 
    End ====
    What could be the reason, i have tried to recopy the packages from the original source and tried extracting 2-3 times
    using the extraction switch "/f" as well but didnt reflect the status.
    Prestage option is already checked.

    Distmgr.log has the below entries although they were not in red
    Will reject STA for DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\ as it does not exist in the PkgServers table       SMS_DISTRIBUTION_MANAGER             
    7/4/2014 10:07:50 AM    6180 (0x1824)
    Will not process this invalid package status file from remote DP ["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\, delete C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA       
    SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM         6180 (0x1824)
    STATMSG: ID=2354 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=Primary server name SITE=SITE CODE PID=7420 TID=6180 GMTDATE=Fri Jul 04 04:37:50.055 2014 ISTR0="C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA"
    ISTR1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE CODE"]\\DP server name\" ISTR2="SITE CODE001C5" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE CODE001C5" AID1=404 AVAL1="["Display=\\DP server name\"]MSWNET:["SMS_SITE=SITE
    CODE"]\\DP server name\" SMS_DISTRIBUTION_MANAGER              7/4/2014 10:07:50 AM       6180 (0x1824)
    Successfully delete package status file C:\Program Files\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\EAKYPGEC.STA        SMS_DISTRIBUTION_MANAGER             
    7/4/2014 10:07:50 AM         6180 (0x1824)
    There are no entries in pkgxfermgr.log

  • PREY - Sound Problem Solved - SLI related, not SB related -

    Hi Folks,
    I have posted this in a few places on the web to help out people with PREY now that it has hit the shelves so they don't have the same issues I did. My story:
    I just spent $ 75 bucks I didn't need to. I have a MSI K8N Diamond Plus running a AMD 4800+ Dual Core, with 2 gigs of RAM in dual channel, and two EVGA E-Geforce 7900 GTX 52MB running SLI. The mobo comes stock with onboard sound, which is a Audigy SE w/ EAX-HD. Turns out the sound is based on a Li've 24-bit chip soldered onto the main board. It is a 6 bit card, meeting the minium requirements on the box.Bought Prey, loaded it, and the game looked perfect but vocals were totally distorted and there was horrible static. I did everything, tried reloading vid drivers, sound drivers, nforce drivers, the game three times and still no joy. I came on this site and played with the hardware acceleration etc etc etc that I have read so often in many posts. No joy.So my buddy convinced me I needed a Creative X-FI card. So I went out and bought a X-FI Extreme Music. I went into the CMOS and disabled onboard sound, uninstalled the old Creative drivers, even uninstalled my nforce and vid drivers. Put in the new card, rebooted, installed newest nforce 6.86, rebooted, installed newest vid card drivers, rebooted, installed newest drivers for X-FI with the Fatality OpenAL support, rebooted. Defragged. Re-installed the game. Went to play it expecting to reap the beautiful sound goodness I worked for, and the same frickin problem. All that work, new card, same vocal distortion and static. At this point I started looking over my shoulder expecting to see my wife standing there with her arms crossed giving me the hairy eyeball with one eyebrow up and tapping her foot. You know how that is....So I went online, scoured 6 dozen mainstream and obscure sites all the way to Russia and found ONE site where one guy on the 0th page on the 5th post on it was talking about the DEMO he tried of PREY and he mentioned in passing that he disabled SLI and ran the game in single card mode because SLI interfered somehow with the sound.So I thought to myself, no way. I right clicked my desktop, went to Settings, Advanced, clicked on Nvidia, went to the SLI tab and cleared the box for "Enable SLI".Rebooted. Game runs perfect. Now I gotta explain to my wife why I spent $ 75 bucks on a sound card I didn't really need.But all that doesn't matter now, cuz I spent 5 hours on it last night. Words cannot describe this game. I've played them all - and I just have to say I want to meet the designers and shake their hands. This is the most beautiful, imaginati've, NON-repetiti've, refreshing, eye-candy drop dead georgous FPS I ever saw. The musical score is genius. The imagination that went into the storyline, and artwork is astounding. Most importantly, the gameplay is none other than spectacular.Enjoy it fellow SLI'ers. I hope this post helps you.Grog

    You're late to the party. I am currently running almost the exact same setup as you with the exception of my 7900GTXs in SLI being from XFX, but that part obviously doesn't matter and the sound board being an X-FI Elite Pro.
    Anyway, the onboard Audigy SE works great in everything with SLI enabled, but I obviously want to use the X-FI and that's where I run into the problems with SLI enabled. However, SLI isn't the problem given how it works for many other sounds boards and on top of that, the SLI architecture was around before the X-FI, so Creative needed to test against this more stringently.
    Regardless, it's been known for a while about disabling SLI, it's just not a good answer. Thanks for the input though.
    I agree about Prey, very entertaining!Message Edited by zcaa0g on 07-8-2006 2:23 PM

  • Stopping Pacman from upgrading a package (Xorg-server 1.9)

    I was looking to use the proprietary AMD drivers (catalyst 11.3 at the moment) and I notice that there is no compatibility with Xorg-server 1.10.
    If I install xorg 1.9 from [http://www.archlinux.org/packages/extra … rg-server/] using
    sudo pacman -S extra/xorg-server
    then later by running
    sudo pacman -Syu
    I'm asked to upgrade to xorg-server 1.10 from testing. Can I stop if from asking by disabling xorg in testing until the catalyst suite is supported?
    Sorry I'm a newbie to Arch and haven't found such basic things out for myself yet. Though I have to say, I'm really loving it!
    As an aside, what is all your opinions on the proprietary drivers? The latest release has solved the screen tearing issue for me (on Debian) and it performs many times better than the open source drivers for my gaming. In fact, the only thing I have trouble with, really, is KMS.

    Maybe disabling "testing" in /etc/pacman.conf is an option for you.  So Xorg (and other packages)  will be updated when it's in the stable repos...
    This is probably interesting for you: https://wiki.archlinux.org/index.php/Pacman
    Last edited by gorilla (2011-04-11 22:49:11)

  • Xorg-server not a dependency for gdm or gnome

    Hi all,
    I am making livecd's for mirror my various installations of hardware.  I have all the packages I want installed by running pacman -Qt.  On a system that uses ATI drivers, xorg-server doesn't appear to be a dependency which I think is a bit odd.
    On my nvidia-based machines, it is a dependency, shouldn't it be required for ATI and other video drivers?  How can you install a working system without xorg-server or some xorg type of server?
    My simple fix is to manually set the list of packages to install and append xorg-server to the end, but shouldn't the dependency tree be more complete?
    Thanks,
    Walter

    I don't think it depends on xorg-server because you don't have to have xorg-server for your drivers to do something useful. You can benefit from increased framebuffer resolution without it, and I'm certain you can still use CUDA without xorg-server (it's actually preferred that it isn't running).
    Also, you can use GUI applications through SSH, where the remote machine does not have xorg installed.
    Edit: I may be wrong about this, and it may just be an oversight. If someone else agrees that it should be a dependency, you should file a request on the bugtracker.
    Last edited by jac (2011-05-22 20:01:24)

  • Xorg-server broken after upgrade to 1.6.3.901-1

    Hello,
    After upgrading to xorg-server 1.6.3.901-1 and rebooting the computer xorg-server respawned repeatedly very fast and I was unable to exit except for pressing the power button (I had runlevel 5 set in /etc/inittab). Then I set the runlevel to 3 in /etc/inittab (using a liveCD), logged in and typed startx. The terminal became black except for a grey cursor in the top left of the screen and I was unable to exit except for pressing the power button.
    The previous version of xorg-server is no longer in the pacman cache because I cleared it.
    Thanks.

    helpvampire wrote:
    Hi,
    I fixed this by using the xf86-video-nv driver instead of xf86-video-nouveau. However it has very poor performance.
    Why you don't use NVIDIA drivers?It's very nice from your side to use open source dirver but you have any problem's with NVIDIA drivers?
    Here you have topic with same issue and drivers:
    http://bbs.archlinux.org/viewtopic.php?id=79512
    Last edited by SpeedVin (2009-09-08 18:00:08)

  • Powerpill portable, pacman -Su , can not upgrade packages

    in home I do not have internet  connection . so I use powerpill portable and I download all packages I need in work place and move thme to home and I run sync and after run sync , I run pacman -Su for upgrade all packages and it work for me good and everything was good , but yesterday when I run pacman -Su , I see message about first need upgrade pacman , and I choose yes for upgrade pacman , but I see error about dependency and pacman can not upgrade and other packages can not upgrade ,
    when I run this command
    pacman -Su
    I see this error
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: perl-xyne-arch: requires pacman<3.5
    and pacman can not upgrade and I can upgrade other packages
    Last edited by mfaridi (2011-03-30 14:30:00)

    karol wrote:
    mfaridi wrote:How I can safely do this and remove powerpill with all dependency and do not loose my system ?
    Try the usual 'pacman -Rns powerpill'.
    I run that command , when I run this
    pacman -Su
    I see these error
    error: could not open file /var/lib/pacman/sync/core.db: Failed to open '/var/lib/pacman/sync/core.db'
    error: could not open file /var/lib/pacman/sync/extra.db: Failed to open '/var/lib/pacman/sync/extra.db'
    error: could not open file /var/lib/pacman/sync/community.db: Failed to open '/var/lib/pacman/sync/community.db'
    :: Starting full system upgrade...
    there is nothing to do
    I go to this directory
    var/lib/pacman/sync/
    and I can not find db files

  • Xorg-server 1.6 - black screen with mouse cursor

    Hi
    First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
    Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
    Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
    When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
    I added a new test user to my system without compiz and get the same.
    I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
    Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
    I googled this problem and was searching similar things in this froum, but I wasn't able to find something
    Here are some files
    xorg.conf (i know there are some bullshit things in it, but it was workig )
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    # Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/local/"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2" # PS/2 Mouse
    Option "Device" "/dev/psaux"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Eizo"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 24.8-80
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "GeForce4"
    # Driver "nv"
    Driver "nvidia"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "GeForce4"
    Monitor "Eizo"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "true"
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Eizo"
    (**) | |-->Device "GeForce4"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
    (--) NVIDIA(0): EIZO L578 (DFP-0)
    (--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GART.
    (II) NVIDIA(0): Setting mode "1280x1024"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
    (**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
    (**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
    (II) saa7134 IR (LifeView FlyVIDEO30: Found keys
    (II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
    (II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Last edited by MueLLe (2009-04-15 21:35:42)

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • Xorg-server 1.6 and Intel GM965 video card[SOLVED]

    Hi,
    Because of gtk2/libxi upgrade issue / keyboard layout issue I had to upgrade to xorg-server 1.6 from testing. It won't configure: "Missing output drivers. Configuration failed". Any ideas?
    Last edited by Llama (2009-04-02 05:21:07)

    Thanks!
    xf86-video-intel
    xf86-input-synaptics
    from testing is the solution - more or less .
    testing disabled again:
    # pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    kdemod-core is up to date
    kdemod-extragear is up to date
    archlinuxfr is up to date
    :: Starting full system upgrade...
    warning: intel-dri: local (7.3-1) is newer than extra (7.2-2)
    warning: libgl: local (7.3-1) is newer than extra (7.2-1)
    warning: xf86-input-evdev: local (2.2.0-1) is newer than extra (2.1.2-1)
    warning: xf86-input-synaptics: local (1.1.0-1) is newer than extra (1.0.0-1)
    warning: xorg-server: local (1.6.0-1) is newer than extra (1.5.3-4)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: intel-dri: requires libdrm>=2.4.4
    :: libgl: requires libdrm>=2.4.5
    Any ideas?
    Last edited by Llama (2009-03-31 19:15:25)

  • Problem when downgrading xorg-server

    I'm using xorg-server from testing, but that breaks opengl effects on kdemod4 (and kde4) http://bugs.archlinux.org/task/11351?project=0
    Actually, it seems it's libdrm, but that's not the point. I tried downgrading to extra with something like:
    sudo pacman -Sf extra/xorg-server extra/xf86-video-intel extra/libdrm
    And it works fine. KDM starts up but when I try to login to KDE4, it just crashes when the splash screen appears. Anyone has a clue how may I debug this? Is it something I forgot to downgrade?
    Thanks

    I forced the upgrade after I checked with 'pacman -Qo offending-package' and no package was shown as owner of these two files. Hopefully it will work after a restart.
    EDIT:
    CRAP. I only realized AMD has dropped support for my card after I upgraded to xorg-server-1.6 and catalyst-9.4.
    Fortunately I still had the old xorg packages in cache. Since the radeon driver doesn't support powerplay this means I will have to stop at catalyst-9.3 and xorg-server-1.5. I wonder how this will work out with future kernel upgrades...
    Last edited by signor_rossi (2009-04-12 20:22:48)

  • Update problems with catalyst and xorg-server

    /etc/pacman.conf
    [catalyst]
    Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
    $ pacman -Syu
    :: catalyst-utils: benötigt xorg-server<1.12.0
    $ pacman -Si xorg-server
    Repositorium         : extra
    Name           : xorg-server
    Version              : 1.12.0-1
    Mmmmh ...
    Ranomier

    pacman.conf
    #[...] standart stuff
    #yaourt repos
    [archlinuxfr]
    Server = http://repo.archlinux.fr/x86_64
    #catalyst repos
    [catalyst]
    Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
    #EOF
    Updating
    $ pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    archlinuxfr is up to date
    catalyst is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: catalyst-utils: requires xorg-server<1.12.0
    Information about the required package
    # LC_ALL=C pacman -Si xorg-server
    Repository : extra
    Name : xorg-server
    Version : 1.12.0-1
    URL : http://xorg.freedesktop.org
    Licenses : custom
    Groups : xorg
    Provides : x-server
    Depends On : libxdmcp libxfont udev libpciaccess libdrm pixman libgcrypt libxau
    xorg-server-common xf86-input-evdev
    Optional Deps : None
    Conflicts With : nvidia-utils<=290.10
    Replaces : None
    Download Size : 1273.11 KiB
    Installed Size : 3818.00 KiB
    Packager : Andreas Radke <[email protected]>
    Architecture : x86_64
    Build Date : Mon Mar 5 07:00:50 2012
    MD5 Sum : 499b6f00f70cab6f75d0cea349b69fd6
    SHA256 Sum : 0d9a4a50770912e8d90b21ffe9dbb0d83d58e60598088d55881000fccf1e87e2
    Signatures : Yes
    Description : Xorg X server
    But in the repos IS the 1.12.x package of xorg-server
    wondering, ok then i take these repos
    Last edited by Ranomier (2012-03-13 18:42:18)

  • [Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

    Hi everyone,
    since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
    I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
    Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
    Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
    My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
    I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
    I have no clue how to fix this. Any help would be much appreciated!
    Greetings,
    Oliver
    Last edited by okraits (2014-08-08 06:33:09)

    lolilolicon wrote:
    How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
    If you simply use `startx`, the actual process running will be something like
    /usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
    Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
    Edit
    In my log there's something yours are missing
    [ 45.465] (++) using VT number 1
    [ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
    I login at tty1 (which is the first one visible after boot) and run startx from there.
    I added the following to my .xinitrc:
    echo "vt: $XDG_VTNR"
    The output was:
    vt: 1
    That would be ok, right? Or is it $XDG_VTNR + 1?
    So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
    Last edited by okraits (2014-08-07 12:37:17)

Maybe you are looking for

  • How to change the message value in COGI entry

    Hi All, I have two COGI records on a material for a plant and while creating those entries those were locked by another user.  So it is getting message number as 897 and so it is not displaying in the report COGI. Could anybody tell me, how to remove

  • I mistakenly changed the video type to iTunes U

    I was intending to classify it as a TV Show. Now I cannot see it on my Itunes U library therefore I cannot change the video type to the originally intended TV Show. I know the file exists by using Finder and browsing all the way down to Itunes U fold

  • Vertical Lines on Export

    I know this has been covered as I am pretty sure I read about it on here but I couldn't find anything anywhere when searching.. I have exported using compressor to mpeg2 using my custom settings which i have used on 2 other sequences but this one jus

  • Time machine partial backup

    My Time machine is only backing up a fraction of the user directory, notabily missing the iPhoto and iTunes libraries. In Console, I see this: 12/17/11 2:43:10.536 AM com.apple.backupd: Backup content size: 371.7 GB excluded items size: 270.5 GB for

  • Hope do I print from my I-Pod ? HP PHOTOSMART 7510

      Would like to know how I can print from my I-POD away from home to the printer?