QI record Release By Date

Dear SAPIENTS,
I would like to know is there any setting for maintaining Release By date on release tab of quality info record.
The date its taking for all vendor is 01.01.2999. If I am taking different date then in PO the error come QI record not maintained for the particular vendor.
I wan to know the complete setting for this field.
Regards,
Kaushal Rai

Hi Kaushal,
I think you are asking about the field 'Release Until".
it represents the date up to which the Q - Info Record for Material-Vendor-Plant is valid.
Now to rectify your query change this date and set it prior to the PO creation date.
Let me know how are you maintaining the Q - Info Record creation on SAP. If it is through LSMW then check, is this field is made default???
Regards,
Shyamal

Similar Messages

  • Read VBAK records till given date

    Hi,
    How can I improve performance for below statement ?
    SELECT VBELN  VKORG VTWEG ERDAT
    INTO TABLE I_VBAK
    FROM VBAK
    WHERE ERDAT BETWEEN MIN_ERDAT AND P_ERDAT
           AND   VKORG IN S_VKORG
            AND   VTWEG IN S_VTWEG
            AND   VBTYP IN R_VBTYP.
    P_ERDAT would normally contain today's date. It is a user selection. User wants all records till P_ERDAT from VBAK.
    MIN_ERDAT : It is derived in program so BETWEEN statement can be used instead of using statement as WHERE ERDAT  LE  P_ERDAT. It would contain the first record from VBAK table.
    Thanks.

    Hi,
    When you try to fetch data using non-key fields, it will fetch all the data and then only the condition is checked. So you may try with some other tables for this with key fields.
    Then for optimizing performance see transaction se30 and in tips and tricks you can try different select queries and see the time taken. Take the best query.
    THen the tables mainly used in SD are:
    KONV     Conditions for Transaction Data
    KONP     Conditions for Items
    LIKP     Delivery Header Data
    LIPS     Delivery: Item data
    VBAK     Sales Document: Header Data
    VBAP     Sales Document: Item Data
    VBBE     Sales Requirements: Individual Records
    VBEH     Schedule line history
    VBEP     Sales Document: Schedule Line Data
    VBFA     Sales Document Flow
    VBLB     Sales document: Release order data
    VBLK     SD Document: Delivery Note Header
    VBPA     Sales Document: Partner
    VBRK     Billing: Header Data
    VBRP     Billing: Item Data
    VBUK     Sales Document: Header Status and Administrative Data
    VBUP     Sales Document: Item Status
    VEKP     Handling Unit - Header Table
    VEPO     Packing: Handling Unit Item (Contents)
    VEPVG     Delivery Due Index
    Regards,
    Renjith Michael.

  • Record all the data acquired by DAQ

    Hi all,
    I have a problem when I tried to record all the data acquired by the DAQ card. My DAQ is NI 6259, and the Labview version is 2009.
    Basically, what I need do is using multiple channels to get the voltages of different point, then I subtract values of two channel (V+ and V-) to get voltage value between two points. In my vi, the sampling mode is continuous and the rate is 100 KHz, DAQmx reading is inside a while loop, and the numbers of samples per channel is set to be 100. After each loop execution I would get 100 data.  I just used the format into file to write the data into a .txt file. It seems after 1 loop only the last one data is recorded instead of 100.  Previously I averaged the 100 data inside the acquisition loop to get one data, so the writing function is OK but it really slows down the program. So I want to write all the raw data to txt file so later I can process them in Matlab.  Is there any way to achieve this? Thank you very much.
    The attached is the my vi for 2 channels voltage measurement and the current source control sub vi. I am new to Labview so the question really bothers me even after I read some similar topics in the forum.
    Regards,
    Hongxiang
    Solved!
    Go to Solution.
    Attachments:
    Dual Channel Voltage Measurement.vi ‏33 KB
    Current Source 1.vi ‏49 KB

    Thank you for you reply. I tried that, it actually record more data per pulse than before, but less pulses were  recorded (there should be 8 pulses in 20 seconds time but only 2 were recorded), I think it was because the for loop inside slows down the program execution, and sometimes the error 200279 occurred.  I think it would be better to separate the reading and recording process. Someone suggests me rather than writing to the file inside the loop, accumulate the data from all of the loop iterations to generate one large array containing all of the samples then pass that to Format Into File outside the loop. Do you know how to achieve that? I tried the as below, it seems totally wrong , only two data was written. 
    (The subvi nameed 1 (see attachment) converts the 2D array to 1D ) Thanks.
    Attachments:
    2D_Data_Reader.vi ‏9 KB

  • How can I make a report of all records with the date in the last two weeks?

    Hi!
    I have records with a date field, I want to create a report that only includes records with a date which is within the last two weeks of the system date, is this possible? Surely this is a basic database function, I would have thought, but I can find no help about it and there's very little in Mac Help about doing anything other than simple stuff with reports.
    I'm not a genius with databases, so help with any required formula or what have you would be great!

    Hi Jonathan,
    Here's a formula you can use with the Match function. 'Date' is the name of the date field, which must be a "Date" type field.
    'Date'>NOW()-14
    Match will select (highlight) all records matching the query. You'll then need to use Organize > Hide Unselected to show only the matches.
    Unfortunately, I haven't found a way to make the NOW() function work in a Find request, and neither Match requests nor Hide Unselected can be included in a recorded search, either of which would reduce repeating the report to a one-button operation.
    Regards,
    Barry

  • Searching attibutes in the record mode in Data Manager

    Hi,
    If i create a new attribute in taxonomy mode,i cannot view it in the corresponding search in the record mode in Data Manager.The particular attribute which i have added is not getting displayed in the attributes in the search pane.If i have to search for that attribute in the record mode what should i do.
    Thanks and Regards,
    Preethi

    hi Preethi,
    there are a few differencies between fields and attributres
    have a look at table:
    Tab. 1 Comparison Fields vs. Attributes
    from this document
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
    for search options based on attributes have a look at the bottom
    of the table I mention
    hope this will clarify a little bit
    Regards,
    michal

  • Is there any way to name the records from a data merge?

    I have a spreadsheet, that has all the names for the images I'm using for a data merge. What I want to do is name the resulting records after the filenames in one of the columns in the spreadsheet. Is there anyway to do this? Or is there some other way to individually name the records from a data merge? I don't have any scripting prowess, so I can't really mess with that. Any help is greatly appreciated! Thanks!

    You merge it along with the others, just like any field. ID cannot do the naming for you during the merge, but most spreadsheets have lots of logic capabilities that should allow you to extract a name for the record from the filename in the column of your choice. The only reason ID knows to find the image instead of writing the filename is that you've used a special name for the field.

  • Logic required to findout "Release To Date" of the Purchase order

    Hi
    We are developing a custom program to release purchase orders as per clients requirements. In that, in the output, we need to display the "Release To Date" of the purchase order. Consider the release codes are R1,R2& R3, and currently the PO is released by R1, then we need to show "Release To Date" as R1. Simillerly once R2 also released the PO, we need to show "R1 R2" in the Release To Date field. This you can see in the Release Tab of the PO.
    Now we need to adopt the same logic in our custom program also. Which table i can find the release to date details. The latest release code of the PO also good enough to build the logic to findout the "Release To Date"
    Any pointers would be of great help.
    Thanks
    Venkat.

    Hi Venkat,
    Check up these tables
    T16FC, T16FD, T16FG, V_T16FC
    Regards,
    Hareesha
    If it's help's reward the pts

  • How to check the records in Master Data Table?

    Hi,
       I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
    I done the following way:
    Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
    But it's not showing the records.It's asking like CID from......To......
                                                                        CID(SID)from.............To.......
                                                                         here CID means customer id(characteristic).
    and showing some settings.
    Please guide me.
    Thanks & Regards

    Hi Sri,
    Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated  data in to master data info object.
    regards
    sap

  • Multiple records in Indesign Data merge

    When I select the option for multiple records in InDesign Date Merge, I still only get one record on a page in preview. When I ask it to create a merged document, each item from the excell file is put on a separate page.  Why is this happening, I want 4 items on a page.

    Message was edited by: p_lue
    I figured out the problem.  The margins would have to be smaller for the page to accomodate multiple  records. Thanks for offering to help.

  • Reserved fields in the catalog record have incorrect data???

    I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

    You have directory damage.
    Use Disk Warrior to repair the drive: http://www.alsoft.com
    Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
    The other option is to wipe your drive and re-install everything.

  • SELECT records larger than date specified in sub query

    Dear All
    Thank you for your attention.
    I would like to select records larger than date specified in sub query
    query should be something like the following
    SELECT my_order_number, my_date, my_task
    FROM MYTB
    WHERE my_order_number IN order_no AND my_date > date (SELECT order_no, date FROM MySubQueryResult)
     (it is incorrect)
    Sub query result:
    order_no | date
    A1    | 2014-12-21 09:06:00
    A2    | 2014-12-20 09:07:00
    A3    | 2014-12-20 08:53:00
    A4    | 2014-12-20 08:57:00
    MYTB:
    my_order_number | my_task | my_date
    A1  |  T1  |  2014-12-21 09:06:00
    A1  |  T2  |  2014-12-22 10:01:00
    A2  |  T1  |  2014-12-20 09:07:00
    A3  |  T2  |  2014-12-20 08:53:00
    A3  |  T4  |  2014-12-21 09:30:00
    A3  |  T8  |  2014-12-23 20:32:00
    A4  |  T6  |  2014-12-20 08:57:00
    expected result:
    my_order_number |  my_task | my_date
    A1  |  T2  |  2014-12-22 10:01:00
    A3  |  T4  |  2014-12-21 09:30:00
    A3  |  T8  |  2014-12-23 20:32:00
    Any ideas?  Thanks.
    swivan

    Hi,
    try this
    SELECT my_order_number, my_date, my_task
    FROM MYTB
    WHERE my_order_number IN (SELECT order_no FROM MySubQueryResult)
    AND my_date > (SELECT date FROM MySubQueryResult)
    Alternatively, you can also make use of joins to achieve the same.
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    Praveen Dsa | MCITP - Database Administrator 2008 |
    My Blog | My Page
    Dear Praveen Dsa
    Thanks for your reply, but order_no and date are paired and related, cannot separate.
    each order have its own date, so it is not working
    Best Regards
    swivan

  • Regarding PR release level dates

    Hi All
    In a Z Report , I want to take the Release date for a PR. In EBAN , table , last level approval date is available.But , I want to have all release level dates. How to acheive this??
    Regards
    Karthikeyan

    Hi
    Thnx for your reply.If the PR has 3  release levels ,  R1 on jan1 , R2 on Jan 3rd , R3 on Jan 5th
    I want to capture  these 3 dates. Can u tell how to retrieve these dates?
    Regards
    Karthikeyan.P

  • Counting number of records in a data block

    hi folks,
    Simple question for you guys: How can I count number of records in a data block.
    In other words, say I have 10 detail records listed on a data block (one of my columns is a non-database item for entering a number). Now I just want to do somethin like:
    Select count(*) From <data_block> into lnRecCount
    Where <non-database column> <> 0 ;
    Can I do this in a button trigger? I can't get it to work?
    Thanks,
    bob

    You should make a routine that go through records of the block and count the records that agree with your condition.

  • Release note data retrieve

    hai experts,
    the issue is dealt with retrieving the data of the release note when the purchase order is rejected by any autority they will give the reasons of rejection in the release note under the text tab at the heade level of purchase order
    when the same release is reset by the end user or originator of purchase order they will do the necessary changes according to the rejection reasons and reset the po
    but the issue is the originator can able to edit or delete the text given by the rejection authority by which it is difficult know the actual reasons of rejection and traceability of the release text data
    please suggest me how to trace the data given in the release note if it is edited or deleted by any person who is have the authority of change purchase order
    with regards
    Uday

    Hello,
    The release notes have been updated.  http://helpx.adobe.com/en/flash-player/release-note/fp_12_air_4_release_notes.html
    Maria

  • Customized LSMW (Batch Input Recording) to upload data for Vendor

    Hello Fiends,
       can u help me on this object and how to upload in xk01.
            Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
    With best wishes,
    Chandu.
    Point will be rewarded....

    Hi,
    Go through the following link, you will find your answer
    http://www.sapbrain.com
    Regards,
    Bhaskar

Maybe you are looking for