Inspection lots are still in TiL for long time?

Hi Experts,
How can I take out of the stock out of Lit in Lx03. Inspection lots have been accepted in Usage decision. even after that stocks are still lying in LiT in LX03 report.
How can I take out of such inspection lots from the LiT.
Thanks
Sree.

Similar Messages

Inspection lot should be created only for particular vendor

Hi
Can anyone please help in achieving the below scenario:
*Material has been assigned to the inspection type A (one time inspection) has been set as preffered and active in the inspection set up in the material master.
*Quality level has been created for material and vendor such that inspection should be carried out when next stage is 1 and no inspection should carried out when next stage is 2.
*Tasklist has been assigned with material and vendor .
Material can be supplied by different vendors,For this material, inspection should be done only for one vendor and for other vendors there should not be any inspection to be done and no inspection lot should be created.i.e Inspection lot should be created only for one vendor say AA whereas now inspection lot is getting created when goods receipt is done for the purchase order with other vendor BB.
My requirement is the inspection lot should not be created when goods receipt is done with other vendors say BB except AA.
Is there any other way other than using quality info record to achieve this.
I can try with DMR but the thing is there should not be inspection lot created while posting GR.
can anyone suggest me any other way to achieve this requirement.

There are user exits when you create an inspection lot. One of those could be used to suppress the inspection lot. Have you looked at these? Have you researched any QM user exits yourself yet? This isn't the first time this specific question has been asked over the years.
It's not hard and there are lists of QM user exits available all over the internet.
Please do some research.
You can also assign vendors to inspection plans with a DMR that requires one inspection, and than after that creates all skip lot inspections which you automatically close by a batch job. The first lot can be manually forced closed. Thereaftter all receipts would be skipped. Not 100% but pretty darn close. This requires that you know which vendors to assign to which plan. Probably as much data maintenance as maintaing the Q-info records.
And yes.. your client needs to come up with better reasons than "I don't wanna..". It's part of a consultants job to convince them.
Craig

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing. Help.

Upgraded new iPad to iOS 5 after successfully using the machine for two weeks. The apps I downloaded are still here, checked for updates, all okay. However, when I try to use iBooks app or even USA Today, icon shakes, settles down then nothing else happens. Several tries, settings appear correct. Suggestions? Safari operates correctly, music icon matches (not from iTunes, simply music on my MacPro and iPod). Is Cloud the issue, perhaps? But everything worked before the upgrade. Using my home network. Hope this info suffices. Appreciate any guidance.

Problem solved. Saw the solution in a more recent post. Downloaded a free app, then all my other apps started to work again.

Report running for long time & performance tuning

Hi All,
(1). WebI report is running for long time.so what are the steps i need to check for it ?
(2). Can you tell me about performance tuning in BO ?
please help me.....
Thanks
Kumar

(1). WebI report is running for long time.so what are the steps i need to check for it ?
The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
(2). Can you tell me about performance tuning in BO ?
I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
Regards,
Stratos

ABAP process job ( BI_PROCESS_ABAP ) in process chain running for long time

Dear Experts,
We have an ABAP process job BI_PROCESS_ABAP in a process chain. This job is running for a very long time than previous run time.
Recently we had an ORACLE database upgrade from 9.2 to 10g.
From the very next day , we are having this problem.
And also previously this process-chain was under control of BASIS guys . they were using a tool called CRONACLE to schedule it. At the time of upgrade this tool was crashed and they asked us to schedule it in BW system instead.
Underlying program is using two custom tables.
one is having both primary & secondary indexes but the other table is having only primary index.
I am not sure whether we have secondary indexes on other table prior to upgrade or not.
Where must be the problem?...
At the time of upgrade BASIS has re-organized the table space along with database upgrade.
please help me...
Regards,
SRIKANTH

Please ask yr basis consultant to check the system parms.
Below i have listed down SAP recommneded system parms .
abap/heap_area_total 4000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
Also check in SM37 if any other jobs are running for long time, peventing the your job running.
Check the SM12 for locks or SM58

Wait step in quality is waiting for long time

hi friends
I have transported the workflow to quality. Am using a wait step in my workflow. Its waiting in that step for long time nearly 1 hour still its not cross the step. The workflow works fine in my developement. But in quality its not moving to the next step. i comparted the wait step in quality and developement. In developement wait step in outcomes tab green light is glowing in Actvie mode. but in quality green light is visible but in blured vision. even i have checked the configuration in swu3 in development and quality. Both have same configuration. What could be the problem that its not crossing the wait step. Plz help me
Regards
vijay

hi Pavan
I havn't used any deadline. Its working fine in development. y in quality its not working. That is my question. Even i have checked in the development wait step from the log i have these 3 steps for histroy
Wait step created                                No errors
Condition for wait step fulfilled               No errors
Result Processing                               No errors
But in quality
Wait step created                                No errors
Only these step is alone there. its has not yet come to other step. But my condition is fullfilling has i checked from the container elements. Am waiting for more than 3 hours. Still its not come to next step. y what could be the reason.
Regards
vijay

Messages waiting in the queue for long time.

Hi Experts,
We are having some Production issue - messages were waiting in the queue for long time and we found the errors in defaultTrace.12.trc file -
Please help how to solve this issue its production and we need to move forward and solve this issue asap.
XI AF API call failed. Module exception: (No information available). Cause Ex
ception: 'JDBC Adapter configuration not initialized: null'.
Thrown:
com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'JDBC Adapter configuration not
initialized: null'.
        at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
        at com.sap.aii.af.service.api.AdapterAccess.call(AdapterAccess.java:99)
        at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.process(AdapterProxyLocal.java:87)
        at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.call(SystemAccessorInternal.java:47)
        at com.sap.aii.mapping.lookup.SystemAccessor.call(SystemAccessor.java:115)
        at com.sony.pi.sp.StoredProceduresHandler.runScalarStoredProcedure(StoredProceduresHandler.java:86)
        at com.sap.xi.tf._MyPage_Invoice_SAP_to_Loyalty_MM_.invokePROC_CUSTOMER_DEDUP$(_MyPage_Invoice_SAP_to_Loyalty_MM_.java:1272)
        at sun.reflect.GeneratedMethodAccessor384.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.aii.mappingtool.tf3.rt.C2CFunctionWrapper.cacheContext(C2CFunctionWrapper.java:91)
        at com.sap.aii.mappingtool.tf3.rt.C2CFunctionWrapper.gotoNextContext(C2CFunctionWrapper.java:44)
        at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.cacheQueue(Q2QFunctionWrapper.java:86)
        at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.gotoNextContext(Q2QFunctionWrapper.java:41)
        at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.cacheQueue(Q2QFunctionWrapper.java:74)
        at com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper.gotoNextContext(Q2QFunctionWrapper.java:41)
        at com.sap.aii.mappingtool.flib3.CollapseContexts.gotoNextValue(CollapseContexts.java:52)
        at com.sap.aii.mappingtool.flib3.CollapseContexts.gotoNextContext(CollapseContexts.java:37)
        at com.sap.aii.mappingtool.tf3.rt.AResIterator.gotoNextContext(AResIterator.java:37)
        at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.gotoNextContext(FunctionWrapper.java:37)
        at com.sap.aii.mappingtool.flib3.IfWithoutElse.gotoNextContext(IfWithoutElse.java:58)
        at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:266)
        at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:326)
        at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:326)
        at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:415)
        at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142)
        at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:118)
        at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
        at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92)
        at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
        at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
        at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)

Hi All,
CPACache refresh worked for one day and the same problem repeated again next day, but need to have parmanent fix and should know the root cause of the problem so that the problem can not be repeated again.
Is there any solution other than CPACache refresh and JDBC adapter stop and start to fix the issue.
And also found some entries in SM12 lock entry list during the same schedule time when the messages was triggered and remains for long time. Let me know whether we can delete those locks ?
user PIAFUSER
Lock mode E
and table SXMSPMAST
with lock argument ......
Any suggestions and tips help us alot in fixing this issue.
Thanks in advance
Gary.

Workflow trf executing for longer time

Hi All,
Workflow trfc executing for longer time in transaction SM58. Why will this happen ? Is there any resolution available ? Please advise on this issue. Below are the details :
Caller: WF-BATCH
Function Module: SWW_WI_EXECUTE_INTERNAL_RFC
Status Text: Transaction Executing
Program: SAPMSSY1
Kind Regards
Shiva

Hi,
Check if WF-BATCH user is not locked or the pwd changed. The same as the process started, see the event trace if you are triggering any wflow from this. And CLick on the event and see the "REceiver Data" and "Trace Data" if any errors are there.
Sometimes, if this user got locked for some reason, it results in issues like you mentioned.
Hope this helps
venu

Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.

Hi,
We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
Thanks,
Saranya

Hi Saranya,
According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
<pages enableSessionState=”true” ….. />
Here is a detailed thread for your reference:
Use Session State in SharePoint
Best Regards
Zhengyu Guo
TechNet Community Support

How to stop process chain if it yellow for long time

hello all,
I see that my process chain is running for long time and is yellow for more than last 24 hours now. I can see where the chain is stuck(not going ahead).
What do we normally do in such scenarios?
Also one more question I have is about delete PSA request process variant. Can i use the same variant in two different process chains, is yes than do I have to include the name of the PSA tables that are in both the process chains. When the variant runs in 1st chain does it delete the PSA tables from the second chain as well..(i hope i made this clear)
Thanks in advance

Once you have done with your init load manually. Then in case it was just the start of the process in ur Process Chain then first remove the chain from schedule and then go to the start process of the process chain and save the setting for immediate, uncheck the periodic box and save and then come out of the screen and then execute and activate the chain.
Note:
1. Before changing the setting in the start process make a note of the start time and also its periodic value.
2. Once the chain is completed then change the setting in the start process back to previous start time and periodic value.
3. Dont forget to save and activate the chain.
Regards,
Rohini

Cldg switch command hangs for long time

Hello Experts ,
We have renamed the veritas volumes vol1 and vol2 of disk group "dg", which is under cluster control.
The renaming of volumes are successfully completed and modification updated in Cluster CCR (cldg sync dg) and volumes are mounted successfully in node002.
We have switch over the disk group "dg" from node002 to node004. The disk group switch over to the node node004 successfully and able to mount the volumes.
Again, we have switch over the disk group "dg" from node004 to node002, but the switch command is not successful and hanged for long time. When we check the /var/adm/messages in node002, the below messages appeared
Oct 22 11:49:39 node002 scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/scsi@1 (mpt0):
Oct 22 11:49:39 node002 Disconnected command timeout for Target 0
Oct 22 11:50:49 node002 scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/scsi@1 (mpt0):
Action plan followed for renaming the volume:*
node002:/var/tmp/bak# umount /local/mqm/log/mq_log
node002:/var/tmp/bak# umount /local/mqm/qmgrs/mq_qmgr
node002:/var/tmp/bak# vxvol -g dg stop vol1
node002:/var/tmp/bak# vxvol -g dg stop vol2
node002:/var/tmp/bak# vxedit -g dg rename vol1 vol1_log
node002:/var/tmp/bak# vxedit -g dg rename vol2 vol2_qmgf
node002:/var/tmp/bak# vxvol -g dg start vol1_log
node002:/var/tmp/bak# vxvol -g dg start vol2_qmgf
node002:/var/tmp/bak# cldg sync dg
Please advice on this error and how to resolve this.
Regards,
R. Rajesh Kannan

But what is device mtp0? It doesn't sound like a disk name. It is having SCSI problems. I don't know if these messages are relevant though.
I don't use VxVM as a rule, but your procedure seems reasonable to me.
Tim
---

Why are my apps taking a long time to update both on my phone and iPad?

Why are my apps taking a long time to update both on my phone and iPad?

Hi ariasm21,
Thanks for visiting Apple Support Communities.
If the App Store on your iPhone seems unresponsive or app updates are not completing, try the steps below.
First force close the apps using these steps:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
These steps come from this article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Next, restart your device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Try updating an app again. If the issues persist, you may want to troubleshoot your internet connection next:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
All the best,
Jeremy

Will SAP remain as market leader for long time?

Hi
I have just started Masters of Business ERP SAP at victoria University. But my background is
accounting and have intermediate knowledge of software industry . From my understanding
there is always something new replacing existing market in software industry. I just want to
know about the sustainability of SAP career . will it sustain in the market for long time?
Regards
Shafiq

Hello, I can assure you that you will not suffer from hunger or anything like that... there are thousands of companies running SAP accross the globe. And if, and that will not happen, somebody would threaten SAP, understand how much money depends on SAP systems. It would take years to get rid of the vendor (SAP) lock-in for all those companies.
Ok, that was the practical approach. On the other hand I do believe in quality and sustainability of what we do here and feel no fear about my future. Even if some kind of a problem appear, SAP would teach you so much about business processes and how companies are runned, that you could immediately switch to some kind of management/ analyst job. t least that is how I feel about it.
Hope that helps a little, I wanted to offer something in return for your answer to my question earlier,
maybe you would like to talk some more one day?
Cheers Otto

When request is submitted it goes for pending standby for long time

Hi all,
Does anyone have any idea about this?
When im running oracle standard report on production its going to Pending Standby for long time and then it works normally whereas when i run the same report on clone server it directly runs without making any wait. Can anyone advice me what could be the issue related to this. Im unable to get to the root cause, so need your advice.
Ours is 12.1.2 EBS - RAC (11.1.0.7) - HPux (11.31) env for production
12.1.2 (EBS) -- Single node(11.1.0.7)-Hpux (11.31) env for Clone.
thanks in advance.

increase some processes in cuncurrent manager.
Reagrds,

Inspection lots are still in TiL for long time?

Similar Messages

Maybe you are looking for