Install Arch on hard disk connected via USB

Hi,
anyone tried this?
I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
I don't know how to do this, I boot laptop from Archie Live CD and:
mount /dev/sda2 /mnt/m
chroot /mnt/m
editing /etc/lilo.conf
lilo
and I get error: Failed stat("/dev/dsa2")
Anyone know how to install lilo on hdd connected via USB?
thanks for any help

i know it's an old thread, but perhaps it'll help someone else later...
i first tried installing from cd, with some problems, using an arch 0.7 cd.
then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
so i tried a ftp install from 0.7 cd - without problems.
then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
with following steps i got it running:
boot from live cd (e.g. archie)
create a folder in /mnt/
mount usb drives partition with the installation there
chroot to mounted folder
edit /etc/mkinitrd.conf
configure it (usb,scsi,ide), there are useful comments in the file...
save it and run mkinitrd -auto
then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
installing lilo from the chrooted system doesn't work. so do this:
type exit (to leave chroot)
cd /
mv /etc/ /etcold/
mv /boot/ /bootold/
ln -s /mnt/yourmountfolder/boot
ln -s /mnt/yourmountfolder/etc
lilo
(if there's an other, easyer way to install lilo, let me know)
and then reboot...

Similar Messages

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

Disk, to Backup the disk connected (via USB) to Airport Extreme

Hi..
My 1.5TB disk (WD My Book Essential) is connected to Airport Extreme.
This disk contains photos, videos, etc. accessible/shared by some MacBook.
Now I need to back-up that disk, so probably I need 1 more disk as the backup disk, and the backup process can be scheduled.
Could someone please recommend me the solution. I am thinking of alternatives:
Alt-1. To have a NAS disk connected to the Airport Extreme via its ethernet port -- Is this a wise solution?
Alt-2. To split (using Hub) the USB from Airport Extreme into 2 hard disks (i.e. one disk is the existing 1.5TB disk for sharing files, while the other is one for the backup disk), and run the backup-process using Time Machine -- Is this a wise solution?
Thanks in advance.

Again, TM will not back up „airdisks“ (i.e. USB drives connected to the Extreme’s USB port or a NAS drive connected to one of the Extreme’s LAN ports). It will only back up drives that are connected directly to your Mac http://support.apple.com/kb/HT1733?viewlocale=en_US
The only option I can think of is to have the original drive hanging off your MacBook and another drive hooked to the Extreme (although this is not officially supported http://support.apple.com/kb/HT2038 , however, some have reported success going this route)
This would turn your lappy virtually into a desktop, though. I'm stuck with a similar set up until i get a mac mini to be my dedicated media server: 1 TB external FW drive holding my iTunes lib is connected to my MBP and backed up to my TC (along with my MBP's internal HD)

If i delete some media files in my IMac = it will delete in my time machine hard drive (connected via usb)?

I have film on IMac hard disk and copy of it in time machine removable hard disk (2tb).
If i delete film from my native, system IMac hard disk - it will be delete automatically in my removable hard disk or not?

You should ONLY use the TM drive for TM activity. If you were backing up using a Bootable Clone I would recommend the same thing. There are several reasons for this with a TM drive, first being that if you store data and TM info on a TM drive if that drive crashes (it's a mechanical device and they do break) not only will you have lost your data you will have lost the backup for it! Next is TM will eventually fill the HD, that is how TM works. Therefore if you place additional data on the TM drive you are shortening the useful life of the TM drive. In short if you want to store other data such as music, photographs and movies which tend to occupy a lot of HD space buy another EHD and save the media there. EHD's are inexpensive so there isn't any reason not to. TM will still back these up.
If you need help moving these libraries to an EHD then bookmark and use:
iPhoto: How to move the Library to an EHD
iTunes: How to move the library to an EHD
iMovie: How to move the Library to an EHD
On my iMac I have 3 external HD's connected. Disk 1 is Time Machine, Disk 2 is a Bootable Clone backup and Disk 3 is for my media. I've been running this way for 4 years reliably.

I have an external hard drive connected via usb, how can I view the contents?

I'm new to Mac... I have an external hard drive, I plugged it in to the usb port but don't know how to view the contents. What do I do?

Open Finder (by clicking on the icon int he Dock) and your external USB disk should show up in the left pane under "Devices".
Note that it has to be formatted for Mac if you want to read and write data.

Can boot camp install windows in external hdd connected via usb

i have win 7 img. in my mac also 500 gb ext hdd
can i install windows in that hdd?????
also i have selected the iso fle n its now downloading support software
so how much time it will take its 3 hours now

No you can't install windows on external drive.

How to install windows 8 onto an external hard drive connected with usb 2.0?

How to install windows 8 onto an external hard drive connected with usb 2.0?

Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html

Can I use time machine to back up via a hard drive connected by USB to a HomeHub router?

Can I use time machine to back up via a hard drive connected by USB to a BT HomeHub router? Is there a better way to back up and store files than via the USB port on my new MacBook Pro? I'd like storage to be accessible from my earlier version MacBook too.

I think you want to make backups without connecting a hard disk via USB. In other words, you want to have the data storage be shared in your home wirelessly.
If this is the case, I recommend using a Time Capsule.
Time Capsule works great with Time Machine. You can set up all your devices to automatically make backups on the Time Capsule wirelessly and effortlessly.

Solaris 8 x86: How to install on disk connected via IDE controller

I have a PC with a Pentium 4 processor and the following IDE disks:
Disk 1 and 2 at the primary IDE bus.
Disk 3 connected via Promise Ultra 133 IDE controller.
I want to install Solaris 8 Intel x86 edition on Disk 3, but the installation
program only lists disks 1 and 2 as locations for install.
Is there any method how to get Solaris 8 installed on Disk 3?
Thank you very much for your help!
Thomas

Hello Michael,
thanks for the information.
There is no support for the Promise Ultra 133 IDE controller listed.
Also, searching the internet for a private developed driver was not
successful.
Anyway, I have tried to make a test installation on a hard disk
connected to the primary IDE controller and I detected a lot of
further installation problems with my equipments because of
missing or not properly identified drivers.
So I think I have to make further investigations on concepts
how to get Solaris 8 run in the best way.
Thanks again for your help,
Thomas

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

How can I create a new folder in an external disk that is connected via USB to my Mac?

How can I create a new folder in an external disk that is connected via USB to my Mac?

Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
Matt

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

How do I make my printer more secure while connected via USB to my Airport?

So a neighbor (a friend, fortunately) accidentally installed my printer on her computer via the network (her computer showed it as a 'Bonjour' printer) and started printing stuff, even though my printer is connected to an encrypted Airport Extreme.
My printer (an old HP deskjet 5550) is connected via USB to my Airport Extreme, which has a WPA2 secure password protecting it. Also, the "Share this printer" box was unchecked in the printer utility.
The DSL lines for me and my 20 condo neighbors all convene in the basement somewhere into one or several master routers.
I'm concerned about this breach of security (obviously) and wondering about security of my iMac as well. The iMac is connected to the base station wirelessly and has the firewall set to 'Set access for specific services and apps'.
I figured if the Airport Extreme has the WPA2 password set (and no one else knows the password) that no one would be able to gain access to the printer that is wired to it, or the iMac that's wirelessly connected.
What am I missing? How did this happen? and what can I do to ensure my network isn't visible or vulnerable to my neighbors or others with bad intent?

are there settings in the airport utility that you can adjust to make it unshareable from the router?
The "bonjourness" of the access to your printer suggests that your firewall is probably doing its job.
If your DSL connection is connected to the WAN port on the AE then the folks on the DSL side of your set up should only be able to see things on your LAN that you've set for 'access from the internet'. e.g. allow access to my printer/disk/... from the internet.
For printers there's an airport utility setting 'share printers over ethernet WAN port' and 'advertise printers globally using bonjour'. How's that set?

Solaris 8 x86: Installation on disk connected via IDE controller

I have a PC with a Pentium 4 processor and the following IDE disks:
Disk 1 and 2 at the primary IDE bus.
Disk 3 connected via Promise Ultra 133 IDE controller.
I want to install Solaris 8 Intel x86 edition on Disk 3, but the installation
program only lists disks 1 and 2 as locations for install.
Is there any method how to get Solaris 8 installed on Disk 3?
Thank you very much for your help!

Hello Michael,
thanks for the information.
There is no support for the Promise Ultra 133 IDE controller listed.
Also, searching the internet for a private developed driver was not
successful.
Anyway, I have tried to make a test installation on a hard disk
connected to the primary IDE controller and I detected a lot of
further installation problems with my equipments because of
missing or not properly identified drivers.
So I think I have to make further investigations on concepts
how to get Solaris 8 run in the best way.
Thanks again for your help,
Thomas

My PC cannot see a hard drive connected by usb to my Time Capsule!

Help please.
My PC cannot see my Toshiba hard drive connected by usb to my Time Capsule. I can see the hard drive in Airport Utility. I suspect my problem may be to do with either setting up File Sharing or else mapping............if anyone can help fix this it would be most appreciated! Thanks.

Wins server is useless.. you won't have one..
Did you turn on the guest account with full read and write permissions.. ??
Can you ping the TC ip address??
Is the airport utility on the windows machine??
Do you have a mac to access the drive?
Is it real fat32 or some strange exfat which won't work?
I also wonder if it should not be formatted on directly on the TC.. or on a Mac and formatted GUID not windows type.
Sorry not all of this is logical..
If you can access the internal disk from windows.. how are you doing that??
If the external USB drive is not working.. plug it straight into the windows machine and enjoy faster better and more consistent file copying..
Share it to the network if you want network access.

Install Arch on hard disk connected via USB

Similar Messages

Maybe you are looking for