Install failed on Windows XP
I have been succesfully installed DS 5.2 on XP several times, but after i did last time uninstall DS5.2 from the XP, I met problem to install it again. The screen freez at "please waiit while components is loaded".
I have cleaned up the registry on the sladp following other stread, but still i can not install, it alwasy freeze at the same screen.
I run setup with debug open, here is the error i get.
What should I do now?
Thanks.
\setup -debug
Enabling debug mode.
Using long form attribute offset calculation.
Time to find offset table: 10ms
archiveReader class com.sun.wizards.core.ArchiveReader has length 27349
archiveReader class com.sun.wizards.core.Platform has length 7176
archiveReader class com.sun.wizards.core.SystemInterface has length 9819
archiveReader class com.sun.wizards.core.PlatformToolkit has length 3134
archiveReader class AixNativeToolkit has length 15854
archiveReader class SolarisPlatformToolkit has length 17266
archiveReader class LinuxNativeToolkit has length 10697
archiveReader class WindowsPlatformToolkit has length 16255
archiveReader class WindowsNativeToolkit has length 17629
archiveReader class HpuxNativeToolkit has length 11420
archiveReader class LinuxPlatformToolkit has length 10110
archiveReader class Osf1NativeToolkit has length 20329
archiveReader class Osf1PlatformToolkit has length 17213
archiveReader class AixPlatformToolkit has length 13323
archiveReader class WindowsBootstrap has length 4091
archiveReader class HpuxPlatformToolkit has length 13975
archiveReader class SolarisNativeToolkit has length 20355
Unable to find class: com.sun.wizards.core.MsgCat
Extracting...Using long form attribute offset calculation.
Time to find offset table: 10ms
......................................................................................Unable to find
class: com.sun.wizards.WizardResources_en
Unable to find class: com.sun.wizards.WizardResources_en_US
Initializing...VM: osName="Windows XP"
VM: osArch="x86"
VM: osVer="5.1"
osType=2
osName=0
arch=2
currentVersion is 5.1
platformNameClass=Windows_xpPlatformToolkit
Unable to find class: Windows_xpPlatformToolkit
Windows_xpPlatformToolkit does not exist.
trying to instantiate WindowsPlatformToolkit . . . success
systemInterface created.
writing native stuff to C:\WINDOWS\TEMP\
nativeProcessAvailable=true
com.sun.wizards.core.Def instantiated.
system locale = en_US
initial default locales = []
com.iplanet.install.util.wbResource::setResourceBundleKeyName: resource bundle key name is "locale.r
esources.DSSetup"
com.iplanet.install.util.wbResource::setResourceBundleKeyName: os name "" os type "Windows"
Unable to find class: locale.resources.DSSetupResources
Unable to find class: locale.resources.DSSetupResources_en
Unable to find class: locale.resources.DSSetupResources_en_US
Command line to be processed:
-debug
Unable to find class: com.sun.wizards.WizardResources_en
Unable to find class: com.sun.wizards.WizardResources_en_US
Hi,
Even I am facing the same problem (iPlanet 6.5 on windows XP)... After installing the web server, I tried to install the app server.. it installs the half way and get hunged up at "Please wait while your system is been updated"... it aslo asks for service pack which is other than SP1
Similar Messages
-
ProClarity 6.3 PAS install fails on Windows Server 2012
We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
KevinI have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas -
KB2775511 install fails on Windows 7 SP1 x86
I receive the following error in the windowsupdate.log when trying to install KB2775511.
Installation Failure: Windows failed to install the following update with error 0x80070005: Update for Windows (KB2775511)
I've found other posts that suggested to look at KBs 947821 and 968003. I've tried both articles and I'm still receiving the same error above. Has anyone else had this issue and/or resolved it
Thanks,
JonI removed just my server name for security reasons. Copy and pasted the run attempt from today with the error included in the log.
2014-07-09 14:47:42:995 1148 2710 Handler Selecting self-contained because update does not have express payload.
2014-07-09 14:47:42:995 1148 2710 Handler Selected payload type is ptSelfContained
2014-07-09 14:47:42:995 1148 2710 Handler Detected download state is dsStart
2014-07-09 14:47:42:995 1148 2710 Handler Adding windows6.1-kb2775511-v2-x86.cab (entire file) to request list.
2014-07-09 14:47:42:996 1148 2710 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-07-09 14:47:43:255 1148 2710 Misc Validating signature for C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510_ctc\windows6.1-kb2775511-v2-x86.cab:
2014-07-09 14:47:43:558 1148 2710 Misc Microsoft signed: Yes
2014-07-09 14:47:43:558 1148 2710 DnldMgr Asking handler to generate non-range requests.
2014-07-09 14:47:43:564 1148 2710 Handler Generating request for CBS update 899E0025-813A-4511-868D-B05B3D459F5F in sandbox C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510_ctc
2014-07-09 14:47:43:564 1148 2710 Handler Selecting self-contained because update does not have express payload.
2014-07-09 14:47:43:564 1148 2710 Handler Selected payload type is ptSelfContained
2014-07-09 14:47:43:564 1148 2710 Handler Detected download state is dsHavePackage
2014-07-09 14:47:43:565 1148 2710 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-07-09 14:47:43:581 3752 2478 COMAPI -------------
2014-07-09 14:47:43:581 3752 2478 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:47:43:581 3752 2478 COMAPI ---------
2014-07-09 14:47:43:581 3752 2478 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes
2014-07-09 14:47:43:581 3752 2478 COMAPI - Updates in request: 1
2014-07-09 14:47:43:581 3752 2478 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:47:43:582 3752 2478 COMAPI - Updates to install = 1
2014-07-09 14:47:43:582 3752 2478 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:47:43:583 1148 2408 Agent *************
2014-07-09 14:47:43:583 1148 2408 Agent ** START ** Agent: Installing updates [CallerId = CcmExec]
2014-07-09 14:47:43:583 1148 2408 Agent *********
2014-07-09 14:47:43:583 1148 2408 Agent * Updates to install = 1
2014-07-09 14:47:43:587 1148 2408 Agent * Title = Update for Windows 7 (KB2775511)
2014-07-09 14:47:43:588 1148 2408 Agent * UpdateId = {B64C56E2-6C8B-4119-A804-E05B92A8B607}.201
2014-07-09 14:47:43:588 1148 2408 Agent * Bundles 2 updates:
2014-07-09 14:47:43:588 1148 2408 Agent * {5FA68C15-05CE-486B-BC01-12E7A0D5F754}.201
2014-07-09 14:47:43:588 1148 2408 Agent * {899E0025-813A-4511-868D-B05B3D459F5F}.201
2014-07-09 14:47:54:263 1148 2408 DnldMgr Preparing update for install, updateId = {5FA68C15-05CE-486B-BC01-12E7A0D5F754}.201.
2014-07-09 14:47:54:273 4416 2564 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:47:54:273 4416 2564 Misc = Process: C:\Windows\system32\wuauclt.exe
2014-07-09 14:47:54:273 4416 2564 Misc = Module: C:\Windows\system32\wuaueng.dll
2014-07-09 14:47:54:271 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:273 4416 2564 Handler :: START :: Handler: Command Line Install
2014-07-09 14:47:54:273 4416 2564 Handler :::::::::
2014-07-09 14:47:54:273 4416 2564 Handler : Updates to install = 1
2014-07-09 14:47:54:360 4416 2564 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2014-07-09 14:47:54:362 4416 2564 Handler :::::::::
2014-07-09 14:47:54:362 4416 2564 Handler :: END :: Handler: Command Line Install
2014-07-09 14:47:54:362 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:368 1148 2408 DnldMgr Preparing update for install, updateId = {899E0025-813A-4511-868D-B05B3D459F5F}.201.
2014-07-09 14:47:54:371 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:371 4416 2564 Handler :: START :: Handler: CBS Install
2014-07-09 14:47:54:371 4416 2564 Handler :::::::::
2014-07-09 14:47:54:375 4416 2564 Handler Starting install of CBS update 899E0025-813A-4511-868D-B05B3D459F5F
2014-07-09 14:47:54:417 4416 2564 Handler CBS package identity: Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1
2014-07-09 14:47:54:420 4416 2564 Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510\windows6.1-kb2775511-v2-x86.cab,
workingdir=C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510\inst
2014-07-09 14:49:19:155 4416 2564 Handler Requesting post-reboot reporting for package Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1.
2014-07-09 14:49:19:156 4416 2564 Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
2014-07-09 14:49:19:156 4416 2564 Handler :::::::::
2014-07-09 14:49:19:156 4416 2564 Handler :: END :: Handler: CBS Install
2014-07-09 14:49:19:156 4416 2564 Handler :::::::::::::
2014-07-09 14:49:19:169 1148 2408 Agent *********
2014-07-09 14:49:19:170 1148 2408 Agent ** END ** Agent: Installing updates [CallerId = CcmExec]
2014-07-09 14:49:19:170 1148 2408 Agent *************
2014-07-09 14:49:19:170 3752 16a0 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:49:19:171 3752 16a0 COMAPI - Install call complete (succeeded = 1, succeeded with errors = 0, failed = 0, unaccounted = 0)
2014-07-09 14:49:19:171 3752 16a0 COMAPI - Reboot required = Yes
2014-07-09 14:49:19:171 3752 16a0 COMAPI ---------
2014-07-09 14:49:19:171 3752 16a0 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:49:19:171 3752 16a0 COMAPI -------------
2014-07-09 14:49:19:171 1148 ddc AU Can not perform non-interactive scan if AU is interactive-only
2014-07-09 14:49:24:157 1148 2364 Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:49:57:309 1148 ddc AU AU initiates service shutdown
2014-07-09 14:49:57:309 1148 ddc AU ########### AU: Uninitializing Automatic Updates ###########
2014-07-09 14:49:57:325 1148 ddc Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:49:57:434 1148 ddc Service *********
2014-07-09 14:49:57:434 1148 ddc Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-07-09 14:49:57:434 1148 ddc Service *************
2014-07-09 14:55:02:367 1176 158c Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:55:02:367 1176 158c Misc = Process: C:\Windows\system32\svchost.exe
2014-07-09 14:55:02:367 1176 158c Misc = Module: c:\windows\system32\wuaueng.dll
2014-07-09 14:55:02:367 1176 158c Service *************
2014-07-09 14:55:02:367 1176 158c Service ** START ** Service: Service startup
2014-07-09 14:55:02:367 1176 158c Service *********
2014-07-09 14:55:02:383 1176 158c Agent * WU client version 7.6.7600.256
2014-07-09 14:55:02:383 1176 158c Agent * Base directory: C:\Windows\SoftwareDistribution
2014-07-09 14:55:02:398 1176 158c Agent * Access type: No proxy
2014-07-09 14:55:02:398 1176 158c Agent * Network state: Connected
2014-07-09 14:55:02:507 1176 7b4 Report CWERReporter::Init succeeded
2014-07-09 14:55:02:507 1176 7b4 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-07-09 14:55:02:507 1176 7b4 Agent *********** Agent: Initializing global settings cache ***********
2014-07-09 14:55:02:507 1176 7b4 Agent * WSUS server: http://XXXXX:8530
2014-07-09 14:55:02:507 1176 7b4 Agent * WSUS status server: http://XXXXX:8530
2014-07-09 14:55:02:507 1176 7b4 Agent * Target group: (Unassigned Computers)
2014-07-09 14:55:02:507 1176 7b4 Agent * Windows Update access disabled: Yes
2014-07-09 14:55:02:507 1176 7b4 DnldMgr Download manager restoring 0 downloads
2014-07-09 14:55:02:507 1176 7b4 Agent Attempt 0 to obtain post-reboot results.
2014-07-09 14:55:02:539 1176 7b4 Handler Post-reboot status for package Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1: 0x80070005.
2014-07-09 14:55:02:539 1176 7b4 Handler WARNING: Got extended error: "Driver servicing operation failed"
2014-07-09 14:55:02:539 1176 7b4 Handler WARNING: Failed to parse extended error: 0x80070057
2014-07-09 14:55:02:757 1176 158c Report *********** Report: Initializing static reporting data ***********
2014-07-09 14:55:02:757 1176 158c Report * OS Version = 6.1.7601.1.0.65792
2014-07-09 14:55:02:757 1176 158c Report * OS Product Type = 0x00000004
2014-07-09 14:55:02:773 1176 158c Report * Computer Brand = Dell Inc.
2014-07-09 14:55:02:773 1176 158c Report * Computer Model = Latitude E6410
2014-07-09 14:55:02:773 1176 158c Report * Bios Revision = A04
2014-07-09 14:55:02:773 1176 158c Report * Bios Name = Default System BIOS
2014-07-09 14:55:02:773 1176 158c Report * Bios Release Date = 2010-07-08T00:00:00
2014-07-09 14:55:02:773 1176 158c Report * Locale ID = 1033
2014-07-09 14:55:02:851 3752 10a4 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:55:02:851 3752 10a4 Misc = Process: C:\Windows\system32\CCM\CcmExec.exe
2014-07-09 14:55:02:851 3752 10a4 Misc = Module: C:\Windows\system32\wuapi.dll
2014-07-09 14:55:02:851 3752 10a4 COMAPI -------------
2014-07-09 14:55:02:851 3752 10a4 COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:02:851 3752 10a4 COMAPI ---------
2014-07-09 14:55:02:867 3752 10a4 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:03:023 1176 9e0 Agent *************
2014-07-09 14:55:03:023 1176 9e0 Agent ** START ** Agent: Finding updates [CallerId = CcmExec]
2014-07-09 14:55:03:023 1176 9e0 Agent *********
2014-07-09 14:55:03:023 1176 9e0 Agent * Include potentially superseded updates
2014-07-09 14:55:03:023 1176 9e0 Agent * Online = No; Ignore download priority = Yes
2014-07-09 14:55:03:023 1176 9e0 Agent * Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
2014-07-09 14:55:03:023 1176 9e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:55:03:023 1176 9e0 Agent * Search Scope = {Machine}
2014-07-09 14:55:38:236 1176 9e0 Agent * Added update {14C9B803-8F12-45A5-8F00-936B6EC937EE}.202 to search result
2014-07-09 14:55:38:236 1176 9e0 Agent * Added update {9E8A0009-E9DF-4A4C-8C14-2D348A160ADB}.103 to search result
2014-07-09 14:55:38:236 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:236 1176 9e0 Agent Update {33A4AA0A-CB01-4326-85F4-4A7D33D8782B}.101 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {F5202A56-FF34-401D-A040-F97C7F70891C}.102 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {35EB79DF-CB34-491C-AB0A-34B63F32B45C}.102 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {A52544E0-929D-4DCF-A3DA-8093EF89546C}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {664A07E1-65EB-411E-9D97-4895C9F6E43D}.100 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {83DE26E2-9963-450C-B423-97F99F624528}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B64C56E2-6C8B-4119-A804-E05B92A8B607}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {0F028FE3-2563-4461-919D-4D084BE3991E}.100 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B5A80FE4-5AD2-4BB0-A522-80B37F37F929}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {9A5132E4-CA62-4F66-BBE2-D920E6252678}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {303559E4-841A-4F9E-9EC4-2FE09E6B8488}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {68879CE4-58D7-4368-990E-8C7DECAF0AFA}.205 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E623E3E7-835F-4058-90A9-3BD24E5B20B4}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {17DE84E9-95FE-4567-9CC8-209B3E2F1FC6}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {73AB9CEA-FA20-4D92-9719-F01F13F613C1}.201 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E1FD3CEB-4DA6-4B3F-9938-C0CBB221B195}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {CB9557EB-07E0-43B0-92BE-D4F47EDFBB66}.102 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E39E5CEB-1C7D-4E44-8F4F-30C239E4D668}.102 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {9594FFEB-42EA-441A-9753-B976E7DAC039}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {348303EC-CCBB-4EB1-88CD-191EF876EFCA}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {DD0187ED-CDE7-4117-B1D2-D8DD119B55E7}.202 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E09F55EF-73B5-4F1F-86B7-B58EBA1AC466}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B43CB2EF-EB7D-48CD-9880-3BBF2C33CA76}.204 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {078CB5EF-859C-4ADE-B8C6-995141424014}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {1937F4EF-9725-4B45-9679-F6D9F22B9F98}.104 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {EE1753F3-40C1-46ED-87F5-D7B31C13F43B}.203 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {265B58F6-A5DC-4167-861C-686C5B2D8769}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {7982F5F8-EA1F-403C-A0F3-6533439E935A}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {CE0122FA-3BB3-4BE4-B1AA-902FE2150753}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {057B51FA-A4D8-4832-BD60-D981071731B7}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {01E49AFA-5893-4D4E-8EA4-7504E4539686}.204 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {08FF26FD-ABF8-4A3B-8C2F-39A0B9DB3C38}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {AD15F7FD-868E-4CC3-8CD0-826AF83EB4F4}.201 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {BFF918FE-1A4A-411C-96AA-EB2222D766DE}.205 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Found 212 updates and 76 categories in search; evaluated appl. rules of 1616 out of 3202 deployed entities
2014-07-09 14:55:38:267 1176 9e0 Agent *********
2014-07-09 14:55:38:267 1176 9e0 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-07-09 14:55:38:267 1176 9e0 Agent *************
2014-07-09 14:55:38:283 1176 9e0 Report REPORT EVENT: {635DC3FB-8E51-4503-9430-7DECAD93C51C} 2014-07-09 14:55:02:835-1000 1
182 101 {B64C56E2-6C8B-4119-A804-E05B92A8B607} 201 80070005 CcmExec Failure Content Install Installation Failure:
Windows failed to install the following update with error 0x80070005: Update for Windows 7 (KB2775511).
2014-07-09 14:55:38:283 3752 163c COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:38:361 1176 9e0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-07-09 14:55:38:361 1176 9e0 Report WER Report sent: 7.6.7600.256 0x80070005 B64C56E2-6C8B-4119-A804-E05B92A8B607 Install 101 Managed
2014-07-09 14:55:38:361 1176 9e0 Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:55:38:502 3752 163c COMAPI - Updates found = 212
2014-07-09 14:55:38:502 3752 163c COMAPI ---------
2014-07-09 14:55:38:502 3752 163c COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:38:502 3752 163c COMAPI -------------
2014-07-09 14:55:47:512 1176 158c AU ########### AU: Initializing Automatic Updates ###########
2014-07-09 14:55:47:512 1176 158c AU # WSUS server: http://XXXXX:8530
2014-07-09 14:55:47:512 1176 158c AU # Detection frequency: 22
2014-07-09 14:55:47:512 1176 158c AU # Approval type: Scheduled (User preference)
2014-07-09 14:55:47:512 1176 158c AU # Scheduled install day/time: Every day at 3:00
2014-07-09 14:55:47:512 1176 158c AU # Auto-install minor updates: Yes (User preference)
2014-07-09 14:55:47:512 1176 158c AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-07-09 14:55:47:512 1176 158c AU Setting AU scheduled install time to 2014-07-10 13:00:00
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU Initializing featured updates
2014-07-09 14:55:47:512 1176 158c AU Found 0 cached featured updates
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU AU finished delayed initialization
2014-07-09 14:55:47:512 1176 158c AU #############
2014-07-09 14:55:47:512 1176 158c AU ## START ## AU: Search for updates
2014-07-09 14:55:47:512 1176 158c AU #########
2014-07-09 14:55:47:512 1176 158c AU <<## SUBMITTED ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:47:512 1176 9e0 Agent *************
2014-07-09 14:55:47:512 1176 9e0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 14:55:47:512 1176 9e0 Agent *********
2014-07-09 14:55:47:512 1176 9e0 Agent * Online = No; Ignore download priority = No
2014-07-09 14:55:47:512 1176 9e0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-09 14:55:47:512 1176 9e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:55:47:512 1176 9e0 Agent * Search Scope = {Machine}
2014-07-09 14:55:49:011 1176 9e0 Agent * Found 0 updates and 76 categories in search; evaluated appl. rules of 241 out of 3202 deployed entities
2014-07-09 14:55:49:011 1176 9e0 Agent *********
2014-07-09 14:55:49:011 1176 9e0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 14:55:49:011 1176 9e0 Agent *************
2014-07-09 14:55:49:027 1176 184 AU >>## RESUMED ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:49:027 1176 184 AU # 0 updates detected
2014-07-09 14:55:49:027 1176 184 AU #########
2014-07-09 14:55:49:027 1176 184 AU ## END ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:49:027 1176 184 AU #############
2014-07-09 14:55:49:027 1176 184 AU Featured notifications is disabled.
2014-07-09 14:55:49:027 1176 184 AU Setting AU scheduled install time to 2014-07-10 13:00:00
2014-07-09 14:55:49:027 1176 184 AU Successfully wrote event for AU health state:0
2014-07-09 14:55:49:027 1176 184 AU Successfully wrote event for AU health state:0
2014-07-09 14:55:52:525 1176 9e0 Report REPORT EVENT: {0C6FC380-B0D7-4305-90B4-3A2AFB8A20AA} 2014-07-09 14:55:47:512-1000 1
202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2014-07-09 14:55:52:525 1176 9e0 Report CWERReporter finishing event handling. (00000000) -
Folio 9480m Windows 10 Keeps Failing to Install FAILED THROUGH WINDOWS UPDATE
Ive tried many many times to get this to work and dont know what to do, is there specific secuirity settuing with my folio 9480m that i need to disable before trying to update? it gets to a point where it says the drive isnt unlocked or something alike that. then back to windows 7 just keeps failing at windows update straight from microsoft trying to get upgraded to windows 10 technical preview
if u have updates that wont go away and every time windows fails they pop back up, right click and hide them before next attempt at windows 10 installation (it is most likely what gives the error and most likely is a driver issue)
-
OBIEE 11g install failed on Windows 7 - 64 bit
I am trying to install OBIEE 11g in my Windows 7 - 64 bit laptop.
It is failing during configuration at the step
Starting Managed Server: bi_server1
The log file is showing following error ....
Starting Managed Server : bi_server1
In public start
ASWLServer.start ...
LOADING DLL : C:\FusionMW\Oracle_BI1\install\config\\StartUtil64.dll
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to vikas-PC 7001
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.StartStopManagedServer.doExecute(StartStopManagedServer.java:56)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:815)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:484)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
Please help
Thanks in advance,
Vikas AgarwalGreetings Vikas.
Dou you solve this issue?
I got the exact same message but setting the second node of a Forms 11.1.2.1 Installation. But the message I got is the same that you have:
Successfully connected to the Domain Runtime ...
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1196)
at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:999)
at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:814)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more -
VMM Agent install fails on Windows Server 2012 R2 Hyper-V
Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan LakshmananSo, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now. -
HP Laserjet CM1415 install fail on windows 7 64 bits
Under windows 7 64bits it's impossible to resinstall the driver for my multifunction printer hp1415 connected with USB to a dell laptop .
I've got this at the end of setup :
"installation failed"
and setup failed saying something is too long around 99 %
Any idea ? (i tried every tips on HP support)
I tried Universal Driver, it's ok as workaroung but i need to make all functions working (scan, etc ...)Je suis bon, Il fait très beau!
I would recommend uninstalling the software (if any has installed) and restarting the PC. Then follow the link below and select your operating system to be directed to the most appropriate software and drivers for the printer.
http://goo.gl/3RRkl
Try doing the installation from this software, and another thing to note - if you are outside of the States you should select your appropriate country from the country select option in the bottom left hand corner of the webpage.
Let me know if this helps! -
SQL 2008 R2 install failing on windows 2008 exit code 2068054013
My install of sql server 2008 r2 is failing with exit code 2068054013. i have checked internet and found few articles to check if OS is debug mode. This is not issue with my server. Here is the summary.txt from bootstrap folder
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068054013
Exit facility code: 1212
Exit error code: 3
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-14 18:24:11
End time: 2014-03-14 18:39:18
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4266.0
Machine Properties:
Machine name: BEL-BHP-DB01
Machine processor count: 4
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SoftBank\SlipStream\SQL2008R2\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: F:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: LocalAccuount
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: E:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlWriter_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SQLSysClrTypes_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\BestPracticesPolicies_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SystemConfigurationCheck_Report.htmHi,
Thanks for the update. Glad to know your issue is resolved.
If you look at the log file SqlSupport_KatmaiRTM_Cpu64_1.log.txt, you will find this error
MSI (s) (64:94) [18:39:14:853]: Note: 1: 2203 2: D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi 3: -2147287037
The exact error no. i.e. -2147287037.
Convert this error no. using a tool (Err.exe)
D:\Err>Err.EXE -2147287037
# for decimal -2147287037 / hex 0x80030003 :
STG_E_PATHNOTFOUND
oledberr.h
STG_E_PATHNOTFOUND
winerror.h
# The path %1 could not be found.
-2147287037 = The path %1 could not be found. Which means the msi file path D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi doesn't exist.
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful. -
Itunes install fails on windows vista
I had done an update to iTunes some time ago. It failed. I tried all the methods to fix it and in the end removed iTunes, Quicktime, etc. I have removed the programs. deleted the directories and cleaned the registries of the misc entries (using RegCure) rebooting in between each step.
the exact message is "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services.
I only have one user made on the machine - which is of course admin. I have tried changing ownership and permissions on the iPod directory after it is created all to no avail.
Please just don't link the the "remove iTunes from a windows vista machine" thread. I have run the MS cleanup utility also. I have tried all kinds of things people have suggested and so far none have worked. PLEASE help me.I had used msconfig and aggressively turned off startups and services. I had not done it after a fresh uninstall and cleanup and reboot though. Just the reboot as part of applying the changes made and trying to reinstall iTunes. I had just completed that to no avail.
So what I just tried was as follows:
1. Uninstalled all Apple software including QuickTime, Bonjour, Software Updater and Mobile Device Support using the Apple guide.
2. Rebooted.
3. Ran RegCure to remove misc registry entries no longer associated with iTunes, etc.
4. Ran MS Installer Cleanup Wizard.
5. Deleted any remaining Apple directories in c:\Program Files.
6. Rebooted.
7. Ran msconfig and aggressively deselected startups and services. Ensured iTunes and iPod where selected. Ensured selective startup was selected.
8. Rebooted.
9. Downloaded and reinstalled iTunes.
10. Received the same failure notices - the failed to start one and if i tried to start the iPod service manually through the service manager, failed to respond in a timely manner message. The events log for the iTunes install error is "A timeout was reached (30000 milliseconds) while waiting for the iPod Service service to connect." and the event log for the manual start from the service manager attempt is: "The iPod Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
11. Changed permissions for all entries in the permissions list to full control.
12. Tried reinstall - failure.
13. Took ownership of c:\program files\ipod directories and files.
14. Tried reinstall - failure.
15. To make sure I tried the install two times - once with my iPod connected and once without.
16. Wrote this entry in the forums.
Previously I had tried the new admin user you had suggested. -
Oracle 7 install fails with Windows XP SP3
After installing Windows SP3 on systems with XP Professional 32 bit, we cannot install Oracle 7.3.4, which is required for an older 16 bit program. Running the Oracle 7 setup.exe returns an error "setup.exe is not a valid Win32 application". The installer file is not corrupt, we can still run the setup successfully on any computers that still have XP Pro SP2 installed.
However, systems that had Oracle 7.3.4 installed prior to the Windows SP3 update will run the software OK; it is just new installations of Oracle 7.3.4 that fail.
I have tried running the install off of a CD, network drive, and copied the files to the local machine, all return the same error. I have tried different users all with Admin privileges. I tried installing with each compatibility mode checked, clean booting the machine, and updating Windows Installer. I always get the "setup.exe is not a valid Win32 application" error.
Any suggestions or info?
ThanksHere is some updated information.
Systems that have been in service for a long time and updated from Windows XP Pro SP2 to SP3 will not run the Oracle 7 installer. All machines that still have SP2 will run the installer.
However, systems that we recently formatted and reinstalled Windows XP Pro with SP2, and then updated to SP3, will run the installer for Oracle 7 with SP3 already installed. This indicates that it is not SP3 that is the issue. It could be an update that was done in the past (Microsoft or another software vendor), or some different file that is on the other machines (same brand, models, and OS, just been in service without being formatted recently).
We also have Oracle 10g on all the systems, but the old CrisPlus program probably won't run with Oracle 10g, because we have to add "C:\ORAWIN\BIN" to the system Environmental Variables or we get a "Ora7win.dll" error when launching the CrisPlus program. An Oracle expert or programmer may know how to work around this issue, but I do not know how.
This does give us options to fix the Oracle 7 issue. Either rollback the SP3 update and then install CrisPlus prior to the installation of SP3, or format the systems and reinstall Windows XP Pro, Service Pack3, and Oracle 7.
Thanks for the input. If anyone thinks of an easier workaround please let me know. -
Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013 06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU 06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013 06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013 06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013 06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013 06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013 06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker 06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2 4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013 5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor 1.0
Information about my package
CodeRush for Visual Studio 13.2
Common Azure Tools 1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg 1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage 1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage 1.0
DevExpress VSIX Package
DevExtreme.Design 13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio 13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer 1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools 12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools 1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0 1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package 1.0
XtraReports package -
Following upgrade, no sound was available. The driver had disappeared. I have found new drivers on the hp support site, however, they fail to install complaining that the driver is incompatible with the hardware.
Other users have been successful in solving this problem, but not me.
Any ideas?
Thanks
Derek PoolHello Pipster100,
I would like to assist you with getting this audio issue resolved with your HP Pavilion g6 Notebook PC. So I can better assist you, please provide me with the model/product number from your notebook.
Also, something that you can try is to use the Recovery Manager to Restore Software and Drivers. Once you open the HP Recovery Manager, install the audio driver that will be listed under drivers.
Looking forward to your response.
Thank you,
I worked on behalf of HP. -
Weblogic 10.3.5 Install Failing on Windows 2008 R2 64bit Shared Drive
I am attempting to install Weblogic 10.3.5 on a Windows 2008 R2 64bit machine.
This will be part of a scaled out OBIEE environment.
As per Oracle's instructions (http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#BIEIG2028) I am attempting to install the Middleware Home Directory to a shared drive (DFS).
When I get past the "Choose Product Installation Directories" I get a "Insufficient Disk Space" error saying there's 0 MB available on my shared drive, which is clearly not the case.
I have verified that I have full access to the shared directory.
I have also tried with several other non-DFS directories.
Tried with java version 1.6.0_24 Oracle JRockit build R28.1.3-11-141760-1.6.0)24-20110301-1430-windows-x86_64
Tried with java version 1.6.0)24 64-bit server (no JRockit)
All with the same results.
I've seen some people post about getting the same error in Mac installs where the solution was to specify -d64 on the commandline, but this is not in the windows 1.6 JDK. I tried -server, but got the same results.
I've also seen some people post about getting the same error in Unix installs where the solution is to point to a different version of df which is used to check space on the file system.
I have yet to find a solution in Windows 2008 64bit that applies to me.
Any ideas?I was able to get around this by installing from the jar using the -Dspace.detection=false option
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e14774/weblogic_server_issues.htm#BCFFDCFI -
Photoshop CS6 Beta install failing on Windows 7 Ultimate (32-bit)
I am using Windows 7 Ultimate (32-bit). I am unable to install the Photoshop CS6 beta version. When I launch the setup.exe file, the "Initializating Installer" dialogue box appears, however as soon as it finishes loading the dialogue box closes and nothing happens after that. If I try to relaunch the setup, it prompts me by saying that another setup is in progress. Could you please help me in this regards?
Hi Pragya,
I have done so several times as well. In fact, I just tried it a couple of minutes back, still the installed initializes and disappears like nothing happened. In the mean while I have restarted my machine a number of times.
Can anyone help me with this issue, as i really wanna try the new CS6? Its really annoying.
Thanks! -
System Update 4.0.0046 install fails on Windows 7 SP1
I just tried updating my Lenovo System Update to the latest version compatible with Windows 7 SP1 (version 4.0.0046), and it fails every time with the following error:
Windows cannot find 'C:\Users\DARREN~1.STI\AppData\Local\Temp\pftD0BB.tmp\setup\pasinst.exe' Make sure you typed the name correctly, and then try again.
I looked in the 'pftD0BB.tmp' folder and there is no 'setup' folder, so I'm guessing this is an error in the installer?
Any ideas? Definitely want to get this up and running again.
Thanks,
Darren DavidIt's no longer (sadly) surprising to me that this issue has not been publicly addressed and that I experienced the same issue with 4.0.100.1124 today.
Here is what worked for me. I don't have the bandwidth to test this again, nor is it likely the most direct method (I'm sure several of these steps are redundant). And I hate authoring instructions for just about anything. Just my blundering path to a non-failing installation.
1. Downloaded the systemupdate40-2011-02-18.exe from the Lenovo support site.
2. Ran systemupdate40-2011-02-18.exe and was presented with the "Windows cannot find..." love note.
3. Unpacked systemupdate40-2011-02-18.exe (I use winrar) to a folder on the desktop (e.g. \sysupdate\)
4. Ran setup.exe within that folder...same failure to find psainst.exe
5. Located and executed psaddZip.exe within same folder. This unpacks to a \setup folder with, surprise surprise, psainst.exe within.
6. Ran setup.exe again. Successful installation.
System Update 4.0.1.x.whatever ran, checked, and updated beautifully, and then BSOD'd on restart. But I'm still here.
Your mileage will most certainly vary.
wws
Maybe you are looking for
-
Get a specific cluster out of a datalog file
HI! I'm saving a cluster with controls (boolean, dbl, u32...) into a datalog file. For several different settings of the controls I'm saving the clusters consecutively in to the file. Is there a way to directly access a certain position at the file,
-
Acess "set-cookie" and set later in lookup in UDF?
Hello Experts, I' have a senario where I need to get a session ID in order to handle a series of web service request. Therefore I have written a UDF in the mapping where the first method (as login message) where I get a login key as payload and the s
-
MDM Console show wrong status of the Syndicate Server
Hello, my MDM Console show me the wrong state of the Symdiction Server. The MDSS is running and works but the MDM Console show me that the MDS is offline. When I restart the MDSS the Console show green (online). After a while is the state in the cons
-
E-recruiting candidates to excel
Is it possible to extract to excel all candidates who are in e-recruiting? without the need for being associated with requisition . thanks in advance, sony
-
Use CNN as homepage. Whe n I quit I want my history to be cleared. Everytime I open CNN it asks me if I want to use US edition as default, which I do. How do I save this without saving history