Install new Test Qestion Items in TestAuthor (Authoring Environment)?

Hi everyone!
Does enybody know, is it possible to add new (external) test question types to the existing ones in test author (Authoring Environment).
I would like to add some other question types eg.:
-define order of possibilities;
-choose the most fiting behavour or attribute;
Now there are the following test and rating types: MC (multiple choice) MR (Multiple choice item with two or more right answers), MR Explicite (Multiple choice item with two or more right answers, where the participant is required to make explicit decisions) Fill-in Item (Item with open answer) and Rating.
So is that possible to add NEW test question types to Test Author and also LSO(because later I'd like to play evaluate and collect results of the tests in LSO)
Regards A Heger.

Hi Andras Heger ,
Presently its not possible to add new templates...
as you cannot configure any things while setting up new type of questions.
Those five are the supported levels..
Thanks and Best Regards
Moyeen

Similar Messages

24" imac installed new hd now iTunes says non-authorized

have 5 computers authorized on itunes. just replaced the hard drive on my intel base 24" imac. used the Time Machine for setting up new hard drive. everything went well......except when i connected my iPad to download from iTunes through the iMac. message says computer is not "authorized". I have already preformed my 1 time "all deauthorizing and all authorizing for this year. how can i deauthorize the hard drive that is not running in my computer??? any ideas? thanks.

thank you!
going to give that a try....we have 4 iMac and 3 Macbook Pro's running along with a few Windows machines - sold a Macbook Pro this year and forgot to deauthorize and so had to deauthorize all followed by re-authorizing - feeling a bit foolish as i stumble around with repeat issue regarding authorizing / deauthorizing of computers for the iTunes account. again, thanks!

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried g

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.

K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

LSO Authoring Environment -- Create new essay type Item

Hi,
In Authoring Environment, how can we create Items with Essay Type answers(free text answers). Authoring Environment provides 5 types of Items as of now, MC item, MR item, MR Explicit, Fill-In item and Rating but we have a requirement to create Questions which allows Learners to enter Essay type answers. We planned to use the Fill-In item for this purpose, but it allows only few Characters to enter. Is there a configuration / Badi to increase the allowed Characters in the Fill-In item.
Regards
Sanjai

Hi
I hope, you have created your new Item category by copying the existing Item category in standard .
I feel that , you have not copied the Item category properly.
So, you need to delete the copied Item category and create a new one as below.
Select the Item category you want to copy (VOV7).
Choose "copy as" > rename the item category in the next screen > click enter.
A pop-up will come,"is it relevant for coying" > click "yes".
Now, you will get the message in the status bar that one item is copied.
Here, do not leave the screen, it has not copied completely.
In this screen click on "save" button and wait. You get a pop-up box "maintain table view" > click "continue" .
Now only your Item category is correctly copied.
From your postings, I feel , problem is in copying the Item category.
If you have followed like above, then problem may be in copying control.

After i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me.

after i erased whole data from the ipod touch 3rd gen. when i put back to sync it. it says in the windows connect to itunes, which i did,i also installed new itunes but still it doesnt recognise . pls help me if u have gone thru same trouble like me
Thanks

I do not understand what "it says in the windows connect to itunes" means?
What is "it" and what is "windows"?
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Problem with installing new line card 7600-SSC-400

Hi all,
I have a trouble when trying to install new line card 7600-SSC-400 on Cisco 6509. Here was the message displays on the screen after I finished installing the line card : "%C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 7, power not allowed: The image for the card is not bundled in image." I tried to install this line card on another slot, but it doesn't work. The attched item is logfile which I saved in the installing session. I don't know what I hvae to do now, please help me to resolve this problem !
Thanks so much,
Hieu

Hi Hieu,
You might want to run the following to see more detail of the error:
show diagnostic result module all detail
And I would also suggest that you reseat the 7600-SSC-400 line card firmly back to the switch, and check the status again.
If it's still showing the error, maybe you can try seating the module on a different slot, and check if you have the same issue.
If the issue still persist after reseating and testing it on different slot, then it might be a hardware issue, and you might want to open a TAC case to further investigate it.
Hope that helps.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Error message trying to install new search engines

I am running Firefox 19.0.2 installed yesterday on a new desktop PC at the office. (Old PC failed to boot on Monday.) I have completed most of my customization without difficulty. However, when I try to install new search engines, it doesn't seem to matter which one, I get a pop-up error message:
"Sorry, you need a Mozilla-based browser (such as Firefox) to install a search plug-in."
I had no problems installing new search engines under Firefox 16 3rd quarter of last year when I started this job. Why am I unable to install search engines in FF 19?

Hello lafritz65, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
thank you

Officejet pro L7590 software/machine install procedure test

Just going to list a procedure I used to hook up an Officejet pro L7590 to my windows 7computer.
I need someone to try this out and tell me if it worked for them ( it worked for both of my computers ).
1...
- uninstall the printer if installed and use the HP unistall to remove the software.
- Reboot to complete the uninstall.
2...
- Download and install CCleaner and run it to repair registry issues.
3...
- Download and run "Windows Installer cleanup utility"
- "If you have the program installed, open it in Start - All Programs - Windows Install Cleanup. It then opens up and you should see a list of many program name. Please have a look there if you find the following entries "32/64 bit HP Cio installer", "bpd_scan", "scan". If you find this, please select the program and press the "remove"."
- Restart computer.
4...
- Search the computer C drive program files for the folder HP, look inside and if it has the folders marked CIO, Digital Imaging and software updater, then go back to the HP folder and delete it.
5...
- Load newest version of HP software
- at the review installation options box - click on "select software" then uncheck everything except for the top two and OCR then click on OK then Next.
- When the connect device now window opens check the box that says "unable to connect now" and hit next and then look for the install shortcut on desktop and make sure its checked then hit finish.
6...
- Restart computer
7...
- Use the desktop HP short cut "install new device".
- use USB connect and hit next
- When connect device now appears use the "connect using USB cable"
-Hit finish button
- Cancel the register product now window.
- Cancel the registration now window
-at the end of device install use "print test page" to confiem install
- NOW install more software using the button that says " More software "
-then press the "more" button and select the "Solutions center software "
-Click finish and exit.
8...
- Double click the HP Solutions desktop shortcut and test your new capabilities.
Please respond to tell me how it worked out ???
Thank you for testing.

Hi rvanwaning
You can use the cd or download the drivers and then plug the printer in when prompted to install the printer software. Here is a document for the different ways to install the printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282602&tmp_task=useCategory&cc=us&dlc=en&lang...
I have included the drivers link for you to download.
Win7 32 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Win7 64 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?

1)Copy this below from --{code} to --{code}
--{code}
set p2l to "" & (path to library folder from user domain)
set the_cache to p2l & "Caches:com.apple.iWork.fonts"
tell application "System Events"
          set maybe to exists disk item the_cache
          if maybe then delete disk item the_cache
end tell
if maybe then
          display dialog "I deleted the file :" & return & the_cache
else
          display dialog "The file :" & return & the_cache & return & "was unavailable !"
end if
--{code}
2) Than open Applescript Editor in your applications and paste it
3) Than select "Compile"
4) Than select "Run"

Install new apps in my iphone 5 since I update my iOS to 8.0.2. I already restore my settings and then it works but after 2 days i have this problem again. What to do? Please help

I Am currently having trouble with my iphone 5. After I update my iOs to 8.0.2 i can't update and install new apps on my phone it always on a "waiting mode". I already restore the setting and its works but after two days problem happened again. Pls help

Choose System Preferences from the Apple Menu.
Choose Software Update from the View menu.
Click Update Now.
Select the items you want to install, then click Install.
Enter an Admin user name and password.
After the update is complete, restart the computer if necessary.

Can't Install New Apps

I can't install new applications to my iPod Touch. I've restored the iPod, reset both it and the computer but it still won't work. The unknown error code is 0xE8000050.

You may want to test with a different free app. Also try to restart the device, and try to sign out then back in the iPhone.
Turn off Cellular data as that won't work if it's a huge app.

Labview program to unistall and install new/updated software programatically

Hi,
I want to create a labview program to install and uninstall teststand deployment programatically.
Query : I have teststand deployment made and ready,wanted to deploy in 5 test PC's and for very first time it did work good. Now when I made updates in the modules, i made a new deployment with version increment. Now this time, i first uninstalled the previous deployment and reinstalled a new one. This time it took time to uninstall and install all 5 test PC's.
I wanted to automate this process through labview. I wanted to create a labview exe or installer which continusouly running on the client PC's looking for a perticular folder for new/updated deployment. If it finds, uninstall the older version if present and install a newer version of deployment.
I wanted to know what things i need to consider while making this type of labview program which uninstalls the older version and installs a newer one? I think i need to even reboot after uninstallation, before installing newer deployment. How make the program running even after reboot and continue the process?

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

SAP Learning Solution - Creating Tests (Authoring Environment)

Hi Everyone,
I wonder if someone can help:
1. How can one change the background of a test to another colour to change the look and feel?
2. How does on create a test that is displayed, one question per screen and then a next/continue button to proceed to the next question.
3. A person must on start the test once and not be able to select start test again.
Your assistance would be appreciated.
Kind regards,
Vince

Question:
Hi Debbie,
We are implementing Learning Solutions 300.(we are using LSOFE300 LSO300 J2ee engine for content player).. We are able to create the Learning Nets in Authoring Environment and trasnport the same to Master Repository...and in master repositiory we are able to release the course
Please let me know the tables where this Learning Nets will be stored.. and also how to get the learning nets from Master Repository to the relevant tables (Necessary Configurations)
(Under Master Repository In the repository explorer The Release button is active...But Publish button isnot active...)
Thanks in advance..
Raghav
Answer:
Hi
Sorry for the delay:
We only installed LSO 200 and now we are upgrading to LSO 600. I am not sure if it is all the same. I do not know of tables that is updated with the learning net info; according to me it is only on the server and Content Manager.
When you release a learning net, it gives you an option to tick a box to publish it after the release; see below:
We make use of epiuse to assist us on the consulting side. Please let me know should you need a contact person there.
Regards
Debbie van Zyl

Install new Test Qestion Items in TestAuthor (Authoring Environment)?

Similar Messages

Maybe you are looking for