Install Oracle 8.1.6 (Solaris): show error after runInstaller

Hello,
After entered "runInstaller" on my SunOS 5.6, the following error message appeared
"Initializing Java Virtual Machine from <.... a list of library ........> Please wait..."
Error in CreateOUIProcess : 14
:Bad Address
I've already set ENVIRONMENT variables (including DISPLAY)
csh> xhost +
csh> setenv DISPLAY my_workstation_name:0.0
Any suggestions?
Thanks for your great help!!
Kent

You need to do the xhost +YOUR_MACHINE_NAME as root.

Similar Messages

ERROR install oracle database 10gR2 in solaris sparc 64

Dear All,
I got error when installing oracle database 10gR2 on solaris sparc 64.
these are the messages:
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
/usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
.0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
/10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
-lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
/opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
any help would be appreciate.
Thank you
Regards,
Spirit

I'm not sure with the solaris sparc 64.
but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
http://forums.oracle.com/forums/thread.jspa?messageID=1254866
probably it will help you.
sorry, this is just my guessing of your problem.
thanks

Creating database after installing oracle 10.2 on solaris 10

Hi,
I installed oracle 10.2 on solaris.
after installation is completed i started dbca to create a database.
i mentioned all the details, after i click finish button, one window will open , in that all database details will be mentioned, when i click on that window, it will become invisible and that same dbca will remain same, actually after clicking ok it has to start creating database.
but here it is going back to that dbca windows and in that back,cancel,finish button is there.
why this problem is coming
why it is not creating database after i clicked on finish botton,
please help me, it is very critical, i want to create database and i want to submit to the client project.
Regards,
Veeresh S

ya, i clicked in finish and one html window opened, in that also i clicked ok, after nothing will work, no messages,no errors,no logs created.
i want to submit this to 1 project, but i am stucked here,
and solaris server is 64 sparc
and i installed oracle 10.2.0.1 64 bit for sparc 64
now this is not working.
can i install oracle 10.2.0.2 x86 in this sparc 64 bit server

How to install oracle 8i on sun solaris OS.

Dear all,
how to install oracle 8i on sun solaris OS.
please guide in detail.
Thanks
Muhammad Nadeem

OTN has much to offer including installation guides:
http://www.oracle.com/technology/documentation/oracle8i.html
Werner

Installing Oracle 10g RS2 in Solaris 10

Hello Guys .. I need a tutorial on "How to Install Oracle 10g RS2" on Solaris 10 .. Please help me ...

hi
what do u mean by Oracle 10g RS2 what RS2 stands for
well
Oracle installation of 10G Release 2 on solaris
if its x86 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15696/toc.htm
if its sparc64 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15689/toc.htm
if this x86-64 then this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15703/toc.htm
hope this helps
CHeers

Install Oracle 11g RAC on Solaris 10

Hello,
I'm new joined DBA in my organization.
There is a requirement from a client to install Oracle 11g RAC on Solaris 10 env.
Can anybody please guide me with some doc or pdf for the steps.
Till now, i've install Oracle 11g DB on Solaris, but i'm pretty new to RAC env.
Note:
I've to do installation via commands, No GUI.
Thanks for your help.
Regards,
Gags

Hi,
Q) Can Oracle 11g Release 2 RAC be installed on Solaris (x86)??yes, you can Install it on Solaris X86
Q) Can the links of Oracle RAC installation over Unix and Linux be taken as base?? As i haven't seen any doc for installing 11g RAC on Solaris, where as it was provided in Oracle 10g.yes, you need to consider Oracle RAC installation over Unix and Linux be taken as base as base document.
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
In addition Refer:
http://www.oraclemasters.in/?p=963
thanks,
X A H E E R

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

I have to install Oracle 9.2 on Solaris 9 I have no clue can any body help

I have to install Oracle 9.2 on Solaris 9 I have no clue can any body help me I havent installed oracle on any Unix based system only done on Windows based by running the oracle installer can any one guide me how to accomplish this Task. any detailed step by step how to install from CD drive how to mount it. Please reply
Thanks

Hi,
 
 You can help with this doc Oracle9i Installation Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, and Sun Solaris
 Bests reagards,
 Nicolas

How do I convert a large file which show error after is converting?

I've tried to export a PDF to Excel and word file and have not been able, show error after downloading and show converting in progress
File is les 100MB and 936 pages

Hi Large Files to Convert,
Even when a PDF file is under the 100-MB file size limit, it could be that the large number of pages is adding a level of complexity that causes the ExportPDF service to timeout before it can finish the conversion.
If the PDF file wasn't created from a scanned document, you can simplify the conversion somewhat by disabling OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community
Otherwise, you might want to consider using a free trial of Acrobat to convert that large file. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

Installing Oracle 9i (64bits) on Solaris 9

Hi all,
I'm installing Oracle 9i on Solaris 9 but when I run the Universal Installer (runInstaller) I get the following message error:
bash-2.05$ ./runInstaller &
[1] 1807
bash-2.05$
Initializing Java Virtual Machine from /bin/java. Please wait...
Error: native VM not supported
Does anybody know how I can fix this error?
I set the ORA* and DISPLAY variables, my requeriments are correct...
Please, if somebody could help me...
Regards...

Refer the 9i Installation Document at
http://download.oracle.com/docs/html/A96167_01/pre.htm#sthref101
With best regards
Shan

Please help me, a problem when install oracle 10g on the solaris 10

currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanks

Since this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini

Install Oracle 10g in Sun Solaris 10 x86_x64

Hi,
We installed Sun Solaris 10 x86_x64 and are trying to install Oracle 10g in that.
When check for required packages. SUNWsprox is missing.
# ./CheckPackage.sh
system SUNWarc Lint Libraries (usr)
system SUNWarcr Lint Libraries (root)
system SUNWbtool CCS tools bundled with SunOS
system SUNWhea SunOS Header Files
system SUNWlibm Math & Microtasking Library Headers & Lint Files (Usr)
system SUNWlibmr Math Library Lint Files (Root)
system SUNWlibms Math & Microtasking Libraries (Usr)
system SUNWlibmsr Math & Microtasking Libraries (Root)
system SUNWlibms Math & Microtasking Libraries (Usr)
system SUNWlibmsr Math & Microtasking Libraries (Root)
system SUNWsprot Solaris Bundled tools
system SUNWtoo Programming Tools
system SUNWi1of ISO-8859-1 (Latin-1) Optional Fonts
system SUNWxwfnt X Window System platform required fonts
system SUNWi1cs X11 ISO8859-1 Codeset Support
system SUNWi15cs X11 ISO8859-15 Codeset Support
How can we install the package and what is the role of the packge.
Thansk,
Selva

The SUNWfoo and SUNWfoox packages were generally merged for Solaris 10 SPARC packages. The foox would represent 64-bit binaries/libraries and may be left out of a 32-bit system install.
Since Solaris 10 only runs a 64-bit kernel on SPARC, there's no reason to supply both packages and they were merged.
For x86, 32-bit kernel mode is still supported, and the package separation exists.
Darren

How to install oracle connection manager on solaris 10

I have installed oracle application server 10.1.2 on solaris 10. How do i install oracle connection manager utility.
My end goal is to use applets/jdbc.
Thanks

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

Installing Oracle Applications E-Business Suite R12 error

hi everyone
i have error while installing Oracle Applications E-Business Suite R12 on Windows server 2003 R12
plz help me
this is log file:
Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
Processing Step 3 of 5
Step 1 of 5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
Processing Step 4 of 5
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
Database Availability
command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1
command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
Configuration Upload
uploading config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : erp
sDbDomain : erp
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Failed upload of config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
Environment File
RW-50016: Error: - Database ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
RW-50016: Error: - APPL_TOP environment file was not created:
File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
RW-50016: Error: - ADOVARS environment file was not created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
RW-50016: Error: - APPSCONFIG was not created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
DBC File
RW-00023: Error: - DBC file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
HTTP
checking URL = http://erp.erp:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://erp.erp:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drvYou cannot use spaces in the directory/file names, so I believe those errors are because you are using a space in the directory name (Oracle R12) -- Please change the directory name to another name with no space (i.e. OracleR12) and retry the installation then.
Thanks,
Hussein

When i was installing oracle database i get the following error please

when i was installing oracle 11g in windows 7 .... i got the below error like this .... can u please suggest this .. .and how can i set environment variables and where i need to modify ... please suggsest me
[email protected]
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
: 1023
Actual Value
: 1115
List of errors:
PRVF-3929 : Adding the Oracle binary location to the PATH environment variable will exceed the OS length limit of [ "1023" ] for the variable on the node "admin-HP" - Cause: The installer needs to update the PATH environment variable to include the value "%ORACLE_HOME%/bin;". However, doing so will cause PATH to exceed the maximum allowable length that this operating system allows. - Action: Ensure that the sum of the lengths of your current PATH environment variable and that of "%ORACLE_HOME%/bin;" does not exceed the operating system limit. Restart the installer after correcting the setting for environment variable.

993774 wrote:
when i was installing oracle 11g in windows 7 .... i got the below error like this .... can u please suggest this .. .and how can i set environment variables and where i need to modify ... please suggsest me
[email protected]
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
: 1023
Actual Value
: 1115
List of errors:
PRVF-3929 : Adding the Oracle binary location to the PATH environment variable will exceed the OS length limit of [ "1023" ] for the variable on the node "admin-HP" - Cause: The installer needs to update the PATH environment variable to include the value "%ORACLE_HOME%/bin;". However, doing so will cause PATH to exceed the maximum allowable length that this operating system allows. - Action: Ensure that the sum of the lengths of your current PATH environment variable and that of "%ORACLE_HOME%/bin;" does not exceed the operating system limit. Restart the installer after correcting the setting for environment variable.the length of the existing PATH environmental variable is too long.
You must reduce the length of PATH before OUI will proceed.

Install Oracle 8.1.6 (Solaris): show error after runInstaller

Similar Messages

Maybe you are looking for