Install problem in process integrator (wlpi)

I'm also having the same problem. and I am using the same config.
Maybe the xml file is corrupt/has bad data?
"Jon Mountjoy" <[email protected]> wrote in message
news:3a1cead5$[email protected]..
Hi Guys,I am trying to run the process integrator - just downloaded it andlicensefrom the downloads.I followed all instructions - and running wlpi.cmd
it actually does startup, everything goesfine, it loads the EJB's etc. and
then it dies with:wlpi: No such license: wlpi *, Weblogic Process
IntegratorNow it does see the license file (If I remove it it tells me it
cannot findit), butthe above message seems to indicate the format of the
file is incorrect orsomething?Any ideas?It looks like this: (I removed the
signature)<?xml version="1.0"?><bea-licenses> <license-group format="1.0"
product="wlpi" release="1.1"> <license component="WebLogic
Process Integrator" expiration="2001-01-15" ip="any"
licensee="BEA Downloads" type="normal" users="5"
signature="blah blah==" /> </license-group></bea-licenses>Removing
the top xml version line doesn't change anything.Running on NT - tried JDK
1.2.2 and JDK1.3.3 - running WL 5.1 SP6 -SQLServer7Regards,Jon

Similar Messages

Problem about Process Integration 2.0...

Hi,
When I start Mydomain server from Process Integration function,
following exception had been thrown:
java.io.NotSerializableException: javax.mail.Session
How would I do next?
Thanks in advance!
Regards,
Eric

[SerializationTester] : isSerializable(class javax.naming.Binding)
java.io.NotSerializableException: javax.mail.Session
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1148)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
java.io.ObjectOutputStream.outputClassFields(ObjectOutputStream.java:
1841)
at
java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java
:480)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1214)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.jndi.internal.SerializationTester.isSerializable(Serializati
onTester.java:36)
at
weblogic.jndi.internal.BindingEnumeration.fixNonSerializableBindings(
BindingEnumeration.java:29)
at
weblogic.jndi.internal.BindingEnumeration.writeExternal(BindingEnumer
ation.java:48)
at
java.io.ObjectOutputStream.outputObject(ObjectOutputStream.java:1180)
at
java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:366)
at
weblogic.rmi.internal.CBVOutputStream.writeObjectInternal(CBVOutputSt
ream.java:220)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.jav
a:213)
at
weblogic.rmi.internal.CBVOutputStream.writeObject(CBVOutputStream.jav
a:190)
at
weblogic.jndi.internal.ServerNamingNode_WLSkel.invoke(ServerNamingNod
e_WLSkel.java:262)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.ja
va:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
ef.java:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.ja
va:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestH
andler.java:118)
at
weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDis
patcher.java:115)
at
weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:
88)
at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:10
8)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:247)
at
weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:225)
at
weblogic.jndi.internal.ServerNamingNode_WLStub.listBindings(ServerNam
ingNode_WLStub.java:374)
at
weblogic.jndi.internal.WLContextImpl.listBindings(WLContextImpl.java:
293)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(Plugi
nManagerCfgImpl.java:724)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(Plugi
nManagerCfgImpl.java:747)<2001/9/21 ??11?53?05?> <Info> <NT Performance Pac
k> <NATIVE: NTSocketMuxer was built on Nov 17 2000 17:38:02
>
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(Plugi
nManagerCfgImpl.java:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.traverseContext(Plugi
nManagerCfgImpl.java:747)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.getDeployedPlugins(Pl
uginManagerCfgImpl.java:710)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.initializePlugins(Plu
ginManagerCfgImpl.java:811)
at
com.bea.wlpi.server.plugin.PluginManagerCfgImpl.init(PluginManagerCfg
Impl.java:75)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanImpl.init(PluginManage
rCfgBeanImpl.java:790)
at
com.bea.wlpi.server.plugin.PluginManagerCfgBeanEOImpl.init(PluginMana
gerCfgBeanEOImpl.java:1270)
at
com.bea.wlpi.server.initlistener.InitListenerBean.onMessage(InitListe
nerBean.java:151)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1933)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1892)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1779)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1972)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks a lot^^
Eric
"Robert Patrick" <[email protected]> ?????
news:[email protected]...
Can we see the entire stack trace?
Eric Chen wrote:
Hi,
When I start Mydomain server from Process Integration function,
following exception had been thrown:
java.io.NotSerializableException: javax.mail.Session
How would I do next?
Thanks in advance!
Regards,
Eric

Problems with Process Integration or non-clusterables objects

We use Weblogic 6.0sp2, Process Integration 2.0, and Windows NT
          Server.
          Some Process Integration' services are non-clusterables, that's to
          say,
          can only be located at primary server (Master), in a master/slave
          cluster architecture.
          Our system needs high availability, but if the master fails, those
          services
          fail too. What must we do?, How we need to configure our cluster?


Hi Sergio!
401 always means: Not Authorized!
Obviously user PIDIRUSER has wrong password. Password has to be set in ABAP Stack using transaction SU01 AND in the Exchange Profile. If you are in SU01 please also check if user is locked. If so unlock it.
After changing password in both areas please restart complete XI/PI engine (ABAP and Java stack).
Hope this helps.
Regards,
Volker

Process Integrator Problem (use of session bean variable between tasks)

Hello,
I'm having a problem using the Process Integrator. I made a
really simple workflow (Start, Task1, Task2, Done) which uses
the bean given whith the order processing example. Task1 creates
the bean and executes a business operation (check inventory).
Task2 executes another business operation (calculate total
price). The problem is when I try to execute this second b.o I
get an exception saying
Nested exception is: Workflow error:
com.bea.wlpi.common.WorkflowException: Empty instance object for
business operation "Calculate Total Price" in
template "Template3".
Someone could help me and tell me what I am doing wrong.
Thanks in advance,
Albert

If I understand you correctly, you have 3 business operations, one is "Create a EJB",
one is call "Check Inventory", the other is "Caculate Total Price". I assume you
save the EJB handle to a workflow variable with a type Bean. My speculation is when
you define business operation for "Calculate Total Price", you did not associate
it with the workflow variable that you saved the EJB handle. Just a wild guess.
Jim Zhou.
"Albert Lanchas" <[email protected]> wrote:
>
Hello,
I'm having a problem using the Process Integrator. I made a
really simple workflow (Start, Task1, Task2, Done) which uses
the bean given whith the order processing example. Task1 creates
the bean and executes a business operation (check inventory).
Task2 executes another business operation (calculate total
price). The problem is when I try to execute this second b.o I
get an exception saying
Nested exception is: Workflow error:
com.bea.wlpi.common.WorkflowException: Empty instance object for
business operation "Calculate Total Price" in
template "Template3".
Someone could help me and tell me what I am doing wrong.
Thanks in advance,
Albert

Problems Installing BPA (Bpel Process Analytics)

Hi,
I was installing BPA under my Applicattion Server 10g R2, first of all i've installed Oracle Bpel Process Manager 10.1.2, after that i started the installation of BPA, checking all the requirements, the installation first copy the files , and then executes the configuration wizards, but the problem is there when is executing the configuration wizards (there is a step that creates the users in the JAZN Directory) and it says "The specified realm doesn't exists", any suggestions??
Thks
[email protected]

Yes, i was checking the logs and i found a previous step when the installtion stops, the logs says:
Salida generada del asistente de configuración "Asistente de Configuración de Oracle BPA":
Install Configuration
Oracle Home: C:\OraPortal
BAM Home: C:\OraPortal\integration\bam
JDK Home: C:\OraPortal\jdk
TASK: oracle.tip.install.tasks.CheckDB
Checking Database connection and Schema ...
C:\OraPortal\jdk\bin\java -Dant.home=C:\OraPortal\integration\bam -classpath C:\OraPortal\integration\bam\lib\ant.jar;C:\OraPortal\integration\bam\lib\ant-launcher.jar org.apache.tools.ant.Main -DACTION=1 -DDBPORT=2483 -DDBSERVICENAME=lab -DJAVAHOME=C:\OraPortal\jdk -DIASNAME=home.efor3.lab.softbolivar.com -DGLOBALDBNAME=null -DDBURL=(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=efor2)(PORT=2483)))(CONNECT_DATA=(SERVICE_NAME=lab))) -DORAHOMENAME=oraclemt -DBAMHOME=C:\OraPortal\integration\bam -DOIDPASSWORD=*protected value not logged* -DBAMPASSWD=*protected value not logged* -DDBHOST=efor2 -DORAHOME=C:\OraPortal -DIASPASSWD=*protected value not logged* -DOIDADMINNAME=orcladmin -DSTANDALONEBAM=yes -quiet -emacs -buildfile baminstall.xml CheckDB
Database connect test: Connected.
BUILD SUCCESSFUL
Total time: 3 seconds
Exit: 0
TASK: oracle.tip.install.tasks.AddBAMtoASList
Add BAM to App Server component list ...
TASK: oracle.tip.install.tasks.UpdateConfigFiles
Update BAM configuration files ...
C:\OraPortal\jdk\bin\java -Dant.home=C:\OraPortal\integration\bam -classpath C:\OraPortal\integration\bam\lib\ant.jar;C:\OraPortal\integration\bam\lib\ant-launcher.jar org.apache.tools.ant.Main -DACTION=1 -DDBPORT=2483 -DDBSERVICENAME=lab -DJAVAHOME=C:\OraPortal\jdk -DIASNAME=home.efor3.lab.softbolivar.com -DGLOBALDBNAME=null -DDBURL=(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=efor2)(PORT=2483)))(CONNECT_DATA=(SERVICE_NAME=lab))) -DORAHOMENAME=oraclemt -DBAMHOME=C:\OraPortal\integration\bam -DOIDPASSWORD=*protected value not logged* -DBAMPASSWD=*protected value not logged* -DDBHOST=efor2 -DORAHOME=C:\OraPortal -DIASPASSWD=*protected value not logged* -DOIDADMINNAME=orcladmin -DSTANDALONEBAM=yes -quiet -emacs -buildfile baminstall.xml UpdateConfigFiles
and doesn`t continue
thks

Process Integrator Installation Problem

Hello all,
I just download the process integrator product, when I try to install, it just does
not work. Nothing happens after installAnywhere dialog's legend goes to 100%.
Thanks,
hm

Try to set the path in your system environment varibles to the java environment
(weblogic home\jdk130\bin)
"Hassnain" <[email protected]> wrote:
>
Hello all,
I just download the process integrator product, when I try to install,
it just does
not work. Nothing happens after installAnywhere dialog's legend goes
to 100%.
Thanks,
hm

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twic

I am having problems launching the standalone version of Lightroom 6 after I have gone through the install and activation process? Lightroom starts to open but "hangs" before any photos in the catalgue are displayed. I have contacted the chat support twice but they have not been able to fix the problem.

I went through the activation process yesterday and shut down my PC when I went to bed last evening. When I got up this morning and turned my PC on and then started Lightrom 6 (I upgraded from version 5) it started to launch but then just hung and became "not responsive". I I then uninstalled and then reinstalled the product today but the same thing happened. What is weird is that when I install from the standalone file I downloaded when I purchased the upgrade it looks like it's downloading the software again over the Internet? I have been having these problems for the last four or five days. I have contacted the chat support folks twice and they were able to get it working but whatever they did did not last as the problem reappeared again once the PC was shut down and then started up again.

Error install Process integration 7.4

Hello,
I try to install sap Netweaver 7.4, process integration 7.4.
When the SWPM request the component for JAVA this display a error.
"Path" found SAP:UT:SR1740:SP5:*:* error but need the label SAP:UT:740:*:*:*
But i download the component 51047454 .
Regards

Jorge,
Check the following note.
1998693 - Sapinst Error: Found the label SAP:UT:SR1740:SP05:*:* but need the label SAP:UT:740
Regards,
Rafael.

Problems with Use Cases for Process Integration

Hi there,
I'm reading the "Simple Use Cases for Process Integration" (http://service.sap.com/xi -> Media Library ->
Documentation) and try to setup the variants 1 up to 4. As per description I created the Technical and Business Systems in the SLD. Everything worked fine. But I can't find the created business systems in the Integration Directory When I click on Objects tab page -> Services without party and and choose Assign Business System, I can't see the desired business systems in the list. What am I doing wrong?
Cheers
Marc

hi Marc,
maybe the business system was already assigned?
1. check if the business system exists in the SLD
2. check if the business system exists in directory
3. refresh SLD cache (in directory menu)
4. try assigning once more
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Running process integrator studio remotely

Hi again
-I have the following scenario.:
My installation of Process Integrator is on a solaris server. To facilitate using
the Studio application,
I have packaged up the required jar files and am able to run the Process Integrator
Studio Java Application remotely.
When starting the collaborate samples server up on the console and connecting
to it remotely (from my machine) ,
it works fine.
BUT when starting up the server remotely through a telnet session and then connecting
to it using the application from my machine, problems start to appear.
Firstly, the server log reports a very long exception list that starts as follows:
javax.transaction.TransactionRolledbackException: java.lang.InternalError: Can't
connect to X11 window server using '<serverip>:0.0' as the value of the DISPLAY
variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:57)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.Toolkit$2.run(Toolkit.java:500)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:491)
at javax.swing.ImageIcon.<init>(ImageIcon.java:115)
at javax.swing.ImageIcon.<init>(ImageIcon.java:134)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginInfo.getAllEventInfo(EnablerPluginInfo.java:1607)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBean.getPluginCapabilitiesInfo(EnablerPluginBean.java:303)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBeanImpl.getPluginCapabilitiesInfo(EnablerPluginBeanImpl.java:210)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBeanEOImpl.getPluginCapabilitiesInfo(EnablerPluginBeanEOImpl.java:216)
at com.bea.wlpi.server.plugin.PluginManagerImpl.getPluginCapabilities(PluginManagerImpl.java:1236)
at com.bea.wlpi.server.plugin.PluginManagerImpl.getPluginInfo(PluginManagerImpl.java:1315)
as far as i am aware, this problem should not arise, because (from what i can
see) no gui app is started on the server, so X11 connectivity should therefore
not matter. And besides, this problem does not arise when collaborate is stared
on the server console.
Can anyone shed any light on this problem?
Regards
Steri

Interesting.
As the stacktrace suggests, there is a call to javax.swing.ImageIcon constructor; which
needs some native information related to X11 server. This is the swing behaviour, BEA
can't help it :)
Set your DISPLAY env variable to correct value and after that this should work even
from a telnet session. You will need X11 authorization to connect remotely, though.
BEA can "fix" this by storing icon detail in bytearray instead of ImageIcon object; as the
server side is not going to need ImageIcon object : It just needs to send the information
to client side. Then client side can build ImageIcon using this bytearray. But I guess this
is too much to ask if the workaround above works.
-Kuntal Shah
Arsin Corporation
Soteri Panagou wrote:
Hi again
-I have the following scenario.:
My installation of Process Integrator is on a solaris server. To facilitate using
the Studio application,
I have packaged up the required jar files and am able to run the Process Integrator
Studio Java Application remotely.
When starting the collaborate samples server up on the console and connecting
to it remotely (from my machine) ,
it works fine.
BUT when starting up the server remotely through a telnet session and then connecting
to it using the application from my machine, problems start to appear.
Firstly, the server log reports a very long exception list that starts as follows:
javax.transaction.TransactionRolledbackException: java.lang.InternalError: Can't
connect to X11 window server using '<serverip>:0.0' as the value of the DISPLAY
variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at sun.awt.motif.MToolkit.<clinit>(MToolkit.java:57)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.Toolkit$2.run(Toolkit.java:500)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:491)
at javax.swing.ImageIcon.<init>(ImageIcon.java:115)
at javax.swing.ImageIcon.<init>(ImageIcon.java:134)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginInfo.getAllEventInfo(EnablerPluginInfo.java:1607)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBean.getPluginCapabilitiesInfo(EnablerPluginBean.java:303)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBeanImpl.getPluginCapabilitiesInfo(EnablerPluginBeanImpl.java:210)
at com.bea.b2b.plugin.wlpi.enabler.EnablerPluginBeanEOImpl.getPluginCapabilitiesInfo(EnablerPluginBeanEOImpl.java:216)
at com.bea.wlpi.server.plugin.PluginManagerImpl.getPluginCapabilities(PluginManagerImpl.java:1236)
at com.bea.wlpi.server.plugin.PluginManagerImpl.getPluginInfo(PluginManagerImpl.java:1315)
as far as i am aware, this problem should not arise, because (from what i can
see) no gui app is started on the server, so X11 connectivity should therefore
not matter. And besides, this problem does not arise when collaborate is stared
on the server console.
Can anyone shed any light on this problem?
Regards
Steri

Process Integration Handbook - useful links - permission denied

Hi!
in the PI 7.1 EhP1 Handbook there are two obviously useful links. Unfortunately I get an "Access Denied" error in SMP although I have a valid SMP user ID with Partner Status.
Does anybody know how to get these to files?
3.1.2 Updating from SAP NetWeaver PI 7.1 to EHP 1 for NetWeaver PI 7.1
If you have already installed SAP NetWeaver PI 7.1, you can update to SAP enhancement package 1 (EHP
1) for SAP NetWeaver PI 7.1.
The following documents show how this works for a typical database and operating system:
Update Guide to EHP 1 for SAP NetWeaver PI 7.1 (SMP login required)
This guide explains how to update your system from PI 7.1 to EHP 1 for PI 7.1. It also describes how
to configure and run a simple process integration scenario.
Update Demo to EHP 1 for SAP NetWeaver PI 7.1 (SMP login required)
This demo shows how to update your system from PI 7.1 to EHP 1 for PI 7.1. It also shows you how
to configure and run a simple process integration scenario.
The URLs for both documents are:
https://service.sap.com/~sapidb/011000358700002004632008E.pdf
https://service.sap.com/~sapidb/011000358700001989572008E/index.htm
Thanx!
Regards,
Volker

Hi!
I can access all other material in SMP and I can also download software. This does not seem to be the problem. I think SAP has accidentially not released these two documents for customers and partners.
Regards,
Volker

Unable to login Process Integrator Studio/Worklist

I'm unable to login the weblogic process integrator's studio/worklist.(evaluation copy). I successfully installed the Process Integrator with cloudscape database and commented out "weblogic.security.realmClass=..." and created the users, groups and orgs. Having done so, I am able to bring the server up, but unalbe to login the studio. It does not take any of the 5 users (defined in weblgic.properties) with the respective passwords, though these useraccounts are sucessfully created in the database. message reads: make sure username, password and server URL are all correct. null No server found at T3://localhost:7001 It also diplays "com.bea.wlpi.WLPIPrincipal".

Vasudevan Atteeri <[email protected]> wrote:
I'm unable to login the weblogic process integrator's
studio/worklist.(evaluation copy). Vasudevan: Your server hasn't started properly. When running server.cmd
watch the console. The At the end, you should see the message
" <ListenThread> Listening on port: 7001"
"Weblogic Server started"
message reads: make sure username, password and server
URL are all correct. null No server found at T3://localhost:7001
It also diplays "com.bea.wlpi.WLPIPrincipal".

Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
I have this package which loads data from dim tables to a fact table , my Package runs without any problem in BIDS (2012)
I have installed SQl Server integration services on SQL and service is also running in services.msc,
the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
"http://msdn.microsoft.com/en-us/library/ms136090.aspx"
For loading my FactTable i have used a Derived columns and some lookups ,
Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
"Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
I have also found that integration services that are running on my system have version 10.0
but the BIDS have version Version 11.0.3402.0
IS this causing problem ? if yes then what i have to do ?

Hi BlaxButt,
The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
Reference:
http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
Regards,
Mike Yin
TechNet Community Support

Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

Hi SAP Gurus,
I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
Please suggest.
Regards,
Amit

Hi Dimitri,
Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
Regards,
Amit

Another Install Problem (With Log Files)

Hey there.
I've read many of the install problem threads and have tried numerous things to get this working, but to no avail. This is getting VERY frustrating.. :-E
Machine is a Dell Latitude with 1Gb mem, Running XP Pro SP2.
My login ID is dgault.
I've set my temp directories (temp and tmp) both to point to c:\temp
Hera are my log files:
====================================
XE.bat.log -- START
====================================
Instance created.
====================================
XE.bat.log -- END
====================================
====================================
CloneRmanRestore.log -- START
====================================
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
====================================
CloneRmanRestore.log -- END
====================================
====================================
CloneDBCreation.log -- START
====================================
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\initXETemp.ora";
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postScripts.log
====================================
CloneDBCreation.log -- END
====================================
====================================
postScripts.log -- START
====================================
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql"
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmsclr.plb;
SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: Not connected
SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
SP2-0640: Not connected
SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 16
20 51 8d
21 LSqVp2u3D6yxyD42bHCkpHL03/8wg04I9Z7AdBjDpSjA9TNSMjO9GP4I9Qm4dCtp6jfnlRLO
22 EXUFAGLlV0fbBvBjoirfWNdXU3VV0WYkgIWTZhXOjnGHQ2VzowkkIKuoKmprxsHwQ=
23
24 /
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRParamTable;
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRType;
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 d
20 4be 207
21 3WAupYEFJyUtDT58GzFPeWkUS6wwgwKJr0hqynRAv7leuFljpGFIgxvNNkagWXCAOYNjnLy1
22 ulbIGu/7Jr4I+E4ghHw/fZT2AjJ43oXGRL90ldDxQSra1CPcaBsAtcpUa02tik8fNqx/KMgr
23 633l8+Va2DhCmvZXp9G7vbOPt7Pl3MM9zMw2e9Y0okY53GpiRO894C9geS1Y7KzzE/IgLaEu
24 32gKwpBN6M0RCm7BYQ+ovzICzvY5VVyfs/mJp4oYS98qQpcbag5dyZAf0OP/aKDRu8nMxkFb
25 i/etbPODbix+jSyOsHVw8+Q+m5vbJnoYgrAEVyEgB3LQctJbF95qK2fWuM+PzvFnTTxAGGzD
26 bbFaBpyXAP09LtZsxHxeICUOFvBRezKHmWrTb5DRlika6Lg9ukf6Rh9Vb+74Kw+dCaqdPNsm
27 BbgD7N+pj3pEKfdUH3CrGeQtEflPW7LZ5wEdk1k/oTs5nee7t70+LOfUmSdFznr3wK/OVfn4
28 KShfwfMR
29
30 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE BODY DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 e
20 41f 191
21 WGxKHaEucYlWwCTtmi+GiJKjekYwgwK3ctxqfHQHrbs+zza9qFIBBo/k3vRdV42GdJcBu7Vv
22 ITu0l2CDDI1d+D9K6+h7yxxZwO9Xtk4x8RFMvTqmcLYXjeAqvfUCO0DbqqDG+0SG03B8N8zU
23 x3CB7ZzBJqbdVlPKP72aumnr8weouKrQT4tmBg3nhDN3+4ve7JkpJVEIEI+T5dJDg3IF2nEb
24 xv03mcyUhyCvDbOazgEBY+LaQTQ99WwuW3WZw4y5xOakbH7mnBiomlFxUQglR1Hft6tRchhS
25 tJTSEuprYV4kbm7IcRmC1LRlilvfcjDmMRWJUyC8NDvKu45v5GiDxx268uhVJTkhTBGaNgPz
26 idKIcZk/6eV4Myw05MkyijGkKIEIpR3Fl0SO
27
28 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRParamTable AS TABLE OF DBMS_CLRType;
2 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE PACKAGE DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 9
20 3162 65e
21 igQsRO8he8CDCdDl4nWpC6D62Xcwgz0T2UgFey9AmP9euDHhTNtIIypFDhpSVolmshjyUX7k
22 SDMhxRY91oYjSjLiIwWaV61R3iM8yqEjBdxa/QqeVR3pZs7ue/BsPqTYpXW8XRTJmbmDO5
23 y6g6sM26+9djcF+m6Fqq8mC6NyZn6S5/u5YqlKUW6Z0/jFVzc+7lxa51jAi2w83JxUetuepc
24 Egxc0uEGzxAtwztimeUcybwG552DvNxfbRYPmlZcF9ms5bun8tEOU37kSxAxwg78sGNmXyJg
25 Jp+fefVhVk3C9oZaBEqX7v/i8BgyRDcEjUz9lIky1qFGl+LwK6UjnlZNwvaMFeGiVd1F/AUF
26 mHTk3md05YqDaT+DTqV8W1zC30fR3VfRvaLGYXiY3Q7FSir0QtQzyR8EXCMAYA3EXEaUFpex
27 HwxcYAocVlx+EIrX0XzluGgiDXiY3Q4l/lmPizTlkrkJ9LGUPSicGFqTaYHrCe0hotIXVND2
28 F7HUVK9cmOiDrcMQA+iDHp686BzH3ZSlKjFqVM6JTMPDsiJPMkNbw/6M6OgXOuH2yHO9AMlb
29 OziQdfrmRltzw9EUNffiMMtRhoLdqYs1e2XMMqCVgGctzFg7P2tU+kbANpabiyUIvhhaAu7a
30 xyvmPVJnmysL4u823iZM2GqZiZCpKW3Qv4NbJpkxn9LDl13NZ651CmCRtTHYpzbEOxcukq0t
31 lwO08hc0bwA3SconEG/mRIBo82vHgSlwIZu7C4AMzIIYYHFCc85MYN2EANfivUZrD486W1F/
32 gR3t490htjoHcFdVf1DiPqkXdtb79WooM4LoLHkw8U+qpiF2NYvSl6lJgb7BVdDiI3dux9EI
33 z61yE26Ss4Fd8U7cZM56fUJJ7aWLcdeAiNbVenhTe3KFBHHuOq+tP/9upKGieCQXcjKNfxCw
34 +1WK69iQf7XbU9OsMBAoNQ7Bo27SJLPVjEvTtkKuNfMrly1CbKAe9AzUNy5bE5S593CX54xc
35 Vw68Qij7gam+GE04w25o+7JJ3oiAgi8jYYbYD2zZxIWMz4MmrVq3eE390NbSHyo7jwHegxKK
36 f3h+yaUTftrGMN6jT2lokTEy1KiyE7MSEwHBtNF5y79IE8xyVuVpIMIMc0DE/TJ0uJ7SOfLE
37 6SqgfhRxYRnsuAM1/GFNB7fwRPx19omV1+MCt2mBmwWKreim3q4NJgWKrexOr0FoZGET9buf
38 RaRVyXcxl/K3Xu/C19hkaqBibbH9eQf9JAWUOtDPAvh/ThmIIy15+VGDFNmummh9SXftWiSE
39 D0vX9JgmaYFFgfMECrWS664SELEFQKBDY2tyhUXo5a0E6EMyi2X4B+aqeJszH5WuDGcKF+d/
40 7NklyocS0C9rvMWyDj1qV73XI6vfmBdSFS55SOx3O5uzoKk4Vw3sFlLVkwyA3w2fuV/6PcOI
41 mayz9ZGxGT3tryZDopGviZT6Zd+BJdzRDexA9vz6kHEnKqSxtLQws8Nbtzm7e+9X7kd2yDnN
42 zdju2xPRoVlXR/M41DFx8QRY5B1OfryhhCITa25oua0+Yrt8bQJCmke63jDNWP+92nHIEU+e
43 eWu1mrm9oOz5JJXuag+ENbhu
44
45 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PACKAGE BODY DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 b
20 933d 1c32
21 LjzBBzQRtLt3jlDfh/c2/PSd1T8wg1VMr0iGl8DXM4HqbvrJkWfzixk0XWxmoBbxAb73ueCM
22 RRbLF4Q2NZ+TRL3Ilc/PFpNhoqGGvhwPEl1/yYy50S2Sbuvp5ZgYt02SeKOCl+i5zJx/KFxp
23 aZ/LBLWh73oUCRg8SdRqDz1a39OEKQKgLDQEZJMtce5ef+zwT5ZUAAEz+DyK3yH1r6W9A6po
24 7D0uukDHeE98+B48WYNUwiLGik+f6u8SGxS1NCqCLEJ2L+t3M70DnS5Hitkt7rbJtWV/mbaY
25 SUf5MnL9HkDmkEmHIjgzBbALmCL5OJiaYZ89pClOS+R5SYmyKWzrsIqf8r3w2E9C7RImcZ/S
26 PpiQK13CjK4xzdtRdwDHc+QzxAc6TEsQl0hJnMUhQ4JSOrEScdGrIg3/vyM+IHMCRPgaVdyW
27 QwNz5BCwH3l7DyS7I9rtz0o42vmIMPki/JV51sHtvfA3KX/YHCrw73K6F3iVIvxALReJLslq
28 D2EfaNl9/jEPJM3UfluFv4B9udP9PIr9vlcV2XlOnFshHFvkM/i7mPMqWyxzU8ItLAPNQXOf
29 A4H5hrHQlWGBGTicoCZTSI2zFvC3BnJxDdSCxCqMbq2nax8YekAYxpnXgFXwEMHX983iJnIF
30 Ts5j/DsoNO5LzewGJJpMeW6xn6Ne2e99xjPoDZmlcmt+O5e/QFVwJD6lwfP9a0v4ds8mjJb+
31 TsGz4AS6uQe5G5v+16q1EoEPtde1/k+1CJ21Tk+qqpq2WjzNMzO6zSKfGblhBsIIE7+ymAqb
32 MI16BXhySREcqDBfg70JTltZSlJ1cGVlgN8YkeGv19z6B50dxsR+PZCbg8GzKuIseoOH4GHG
33 7m409J5hUCL1Vd3BVQAUxMTEvJs0EDBpnYiE2+zEFupuYf95bFiJPPfLee+BGcmafJCGLD/4
34 0tCd8E4WgA8BmMWC0GgEn+5JSeJhv+LJ/IM73/OOFbgktiRFUFUIKzGQXww4iT+5ToDIdyhu
35 KNqYlEroIub+fYYzRYZ4hc58Kl8oKCFo380RfgvrSpFsTzq665o/s1fOvdttC8nl2uL5zX+j
36 185OV4CGkhWj+1w8JQJcoLCMpHOhJrOzIxHTmh6G0MhSs7gMlSS167uqAIsVmgaznSgKW6rc
37 cL7OeQVtIMwIxBIw6OtBZtN10ktKYbeY/o9XopbUaXifH/4P3w0WGyUsHblz0zGydaQrKbm5
38 uPuL+L7kLd3CHT9fH2jwpJiWzwQyJDsIOVO/EGURdMaGsPq0MYyuTsYzlfeGgDuMxcSGZmNd
39 Ae2Z5FdOIy3wMgkfsM0Dhn/EhwNVilWtwCOZ/I7E4CNytJpiHP2fSz/VyH740Zp4YQCaUzJ+
40 mLzH/rRqJPREB7oGsJCfsFkiwbz5TZIkBNqwCMC/KbYppPMw5P3NIUaGXUrk1sTQ7uT5UsAK
41 V9C/11OnxpR4TLP4lBLyOrTPBfINmWUokO9/KHkkofP+XnoQR5jAkHqojfq7m09jiZAHEpGA
42 ePrJmr0Whow8Un6YMdwLLGA/WTKAFYNg/oLuzTOo4vIj2tCHXjDvPmQEUdzfnxlkm5+2Qvcz
43 G4NFjoG5vwPi8hD+0e2x+IYpM4/4XJpzWYcUnSZF0Sm7P7rSe9K/u9kymbsmSQO3pIv+CjT4
44 WDRaQl5MTAkZQXceyBnWs5iUmjE8Tvhcmj/FlvGa9FPRYLwK0w40KEQi83M/qESXT6g1Oh2r
45 NBxzeWIZCtI/lDHtVMCaskLqjrsZA49dnL31ltDAmrJSaz5kFNvwQTQFL3itnqrGqEhuxtnm
46 aPdu0QdTCrMTNBev+mRRV0ItXV0S7AVDxHH6bxk8jf7lvrd6a/4KvlWihxq+9BrRJ7knFXE6
47 SoxxOm02vptjf+Lk3OMF6K+HB2hhQTQFA73CD4aR4G7G2f9sSl31oUgFRzweyAU8t/7FxN75
48 TviNBZ8clvEFLW68bHhjuRiOeCNOQVx4+vKqmhX9sJvgzaTeHvHknzr8sai8n8HZEo0ZoQa1
49 +JQZSGaW8VWiXpyiFygqhLGoNIC/GQozijQGHnP8u1JlliWPWNtBd2sQvt9suZ4hYSwIY/M/
50 /hV64rLkRBreD/l2Uhz1/hp6ao38giE9YUoGnMzezpWRq/lWkECwAiMWi+3LWCLO1uwjVAMN
51 9l1VIpOHxY0/sYiB+DEaHxs8T1q5PjgzCJdGMYIpK1gt939KvMc4HLEGnao4Mwiu84s1wJxG
52 vpb+vMtcuZBCZGV61ZCqnatorkPp4Xr3PKHege67z9V9o5+omgg5XZbCOs4l8MYp6Ib3dzyG
53 gkO8Gkhf980Qc825jJzsJIZCjfeaVg8/FodBp9EsJo+4+qSHPaB1cxowCKVibcY8kFidAB63
54 30Z58Dqw788cxVnmtKsAibcse8sPUhZ4aEp7RApXNZtNWsHG3XriYSNiVnL2URnL/6GU6xyz
55 XlDcNQB3VXME6ICBt2REKZPwhgWoI3GNU1vSNkteetD8QkG9fVKhPPY1Qod4gZ9U3MWQM3BB
56 UTIYi4tNV49YuEgb6RxkRH2LNNOGzS9VWfJJM8hBNZ/oUB+pxSDW5eTDVENm4ptMcKqOdztV
57 HgY6Tkt6xgjaBuQ4AbwiGJu2bEI10JrzhoTsg8eVznXgzifgeqE2z4R/HAn+HNtXNSlxXyTn
58 UTQiGJtOcInHdkPeyiihRXIQhXpdVJ1vyBdYUCBbXVK5mxyFthr/qeQ1Nadk4sabsPotel4L
59 OhoELILFT/TuqP0zPT/aQV3YvO6WxoSnKWq71L3ysAQi6L0itmqEGMH2ODDs4zqfBBxj3Ll/
60 blH1vWoH8LAsNwhSBaUqa3oxjxK6ISgFwICp3MraldLIR4FZotC3CIeZcgOJvsSETlf6edBD
61 vcOwWoMUYilYEYMhaooNpg0MQnAgW+WQkUjNN+2paHivVUlW5Hw0nCXoh6TN3jyFrt34f9eG
62 jggLV530Qs5eZ511mdL8UAdPShDOG87uPtKuJcpB9HNevdFkMBbAqLJDLnJg6PTvB+/xghSd
63 AjP5frWAs7zIDQiDEa7H1RkczcZ+47ag0Pd66fjOjvhYaa4J84eZBZm9HSBbitLjqtD8iOCV
64 ldaSzV6X0ADKnZIDCK4S0SISGyIQHEE0zPjueoGpaEi0rcD+ZOsZ8E3tmwD7+Qa1HUsy7xmd
65 65LTHSTh+DEMYa7cGrA/19BMMGc6MMCIJbTLLn4PG6plCvOS6O0HQ93d6fGn+LX1W5z/2CxD
66 wlv5dWHWX0qHuxDlO/j5Zx8Ziu2qZP6zBTBJ2ByQKT8TtPg16tQeOinOKswSRh79S9oQwX1G
67 j2qITsQ6VfC+ZSNy3Pxk9FUdTSBnuV0y1LZI0Eo0lsgSmhIBoEEXsnG2ZICpvPst6/4N3HVV
68 dqQvDw6fTs4sYXGUvhNOjDP24P4Ed3gOv4IQ/UP1Qz8HcL4JQEOXPqd4i1RBZjo+rMQQ6tTN
69 Kk6Sp24/ErMivuBkyMy+/GOS6B7SBW3S7qn+JWak+OJ590Fu8A89ZhCpm2JvKbMKA9xvKbZG
70 l5RlxbFZJjRssJsuCSgmVpw/20jaZF93A1kO9maBqYv9yHtCJgaJd0lvJ0IQHqA0BgGjvO7F
71 Yp0NWizrz9Glvs2YYXNqt3QmCoMAz6mbYjPLKDqjXiIsXkrRpb7NmGUirgMN4vRygBaaqXKG
72 sbmQCDq4FU6y8mt31+6mFAlFq6MyI+anWj48h75lqrJHxTL0iWan1RQJGP2eYh/LcCYIsLcK
73 d2wJGALHoRMYHiuIWM3IAirHptM+lbICp+4s8SWLuKbTPpWD1eqL/TcfiYda+K9tCOwyuaZU
74 T1cJ8oc8pawlmd4kMH+HAxndF1vnv1xpHraM0Qsc5Q48SdFx+vaWyy+55Q48SdTARO7LMohO
75 aUQNIghZE0jsladaPjyHvmWahXY8SUqJ8ZyBLu6mqm2i8lKEawHOdN50JUCm8av0ieDNjdVO
76 8I9qni729IlmikqV+6m46kQNIghm9wmJ3zZW6s7DV6YvueUOPLCGenhW6loajniOo9F23Qlq
77 mm/LWhqO8Jfdmfl+VjLuqaLys010egwajvCX3W1nMUhLcTVTCqyjT1O4ViplE9+QZLY+lRW+
78 Gi6VMgpfz+zh38em0z6VsgKn7kSL7xeMdYu4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwny
79 hzylrCWZ3iQwf4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0i
80 CEfPXX4h100MGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0AhOd6EpqHwovItM5eNOmCl
81 OALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA/2B/bAkYVOLIWj5IFqBx
82 V6ljQJ1idshaPquNNx/kMVT8Ffv0iVHMiDCnWj6rjTcfN8JVcL6suOpEDSJS7lQnkd9O9wPM
83 WfSJ4O5xJegGRVxgyYIsrf2VB0cDWB3IWj5IFqB0lnwsrf2V65HtrXapovItM5eNOmCPRGMf
84 JT+l4DTJkNqmPElKifGcKjQO0uaDKIdfsdh4pTH7FUyUd5LbTdl1B8VNgfSZ6puDbR1GmMVN
85 gfQtcTVThEzUesM1O656giyt/ZUh13wMGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0Ah
86 Od6EpqHwovItM5eNOmClOALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA
87 /2B/MZyi8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W
88 6i+55Q48SdF2DPBHySLA3xj6vBQJGALHoRMYHiuIWNfPXX6OXkuW9IkGR/taGo54jqNAH3XQ
89 bvDg5sHNy2smFt3Pkc/eRsG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQw
90 f4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEfPXX6OXkuW
91 hGZjERAGrdM+lYPV6ov9WGqS2/cJm8K8PnaPIPdaPkgWoHRPqPA1gy9nCe/3CdjtwAG8889U
92 a95i9wlGVS1Xpi+55Q48SYcUCRglQKlDnk+eW6YVTJR3ktuZTvcDzFmvvBQJGFTiyFo+SBag
93 cVepY0CdYnbIWj6rjTcf5DFU/BX79IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5HfTvcD
94 zFmvvBQJGALHoRMYHiuIWNdtpLBD13apovJShGsBMDcfC1Vp3RT0UstbyvcJ2O3AAbzzMDUp
95 AqAsNARkk8HLqYH072NdAbKWFu3IM9Yfhioess+fqbjqRA0if/xli2ueJxAGFY00Mwam7uKe
96 JxDgVuovuWmcfyhcaR62cjQEHkDmkAei8rOS28cUCRgN6uJHeGUHgfTvY10BEF5X3Zpm9wlo
97 aRGIIoSr1qCoqRpgZmNUEkOXz+/OS+bro2Zj55gLUqbKaFw1O640WhqOY7L72ZQilMumRpjF
98 TYEpVpbT2ZTTPpWyAqeZW0t3pcQCHdM+6Yxlpawk/QxMV8r3CSHFHXLTPumMZaVmaWH9Vuov
99 ueUOPEnRdgzwR4uVVHiO/G5aPm//bHnF4roBkd+W1EVrUMai8lKLphQJGP2eYmqZNAQeQNzT
100 xcG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQwf4cDGd0XW+e/XGketozR
101 CxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEdtLUgWWYJ8tj6Vg9Xqi/1YapLb9wmb
102 wrw+do8g91o+SBagdE+o8DWDL2cJ7/cJ2O3AAbzzz1Rr3mL3CUZVLVemL7nlDjxJhxQJGCVA
103 qUOeT55bphVMlHeS25mW1EVrUMai8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJ
104 IcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBHi5VUeI6SdVo+b/9secXiugFd3quGR/taGo54
105 jqNAqlm5bmr7WhqO9mRxWCA2h2kjqM1bltT2PL4dcBAGWj5Ck2qZ8pYac4+VMNcjHU+kymhc
106 NTuuX0VfQk2so09TuGxk7VdnUwqso08E2ZRG2ncBR4SUd5LbA3J/VE8wWhqOO656gGZjVBJD
107 l8/vx1RPVwnyhzx4Ah3kYtM+lbICp+6CGn9a/eFaJxQJGA3q4kd4rCjVITtsCRhL2m9bphVM
108 lHeS222i8syDL0tx7l7upmdTCqyjT+g6UVTiyFo+SBagcVepY0CdYnbIWj6rjTcf5DFU/BX7
109 9IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5Fhcn9UT1f3CVZux/+twW7H0d5eUlXF7wM+
110 MvSJBkf7WhqOeI6jQB8WMsdXpvSJ4M2N1U7w3Znylhpzj5Uw13u/ptiudj5slvYwNSkCoCw0
111 BGSTII8DHUaYxU2B9MycfyhcaR62H+JdDR9b579caR62C76suAdFX0JNrKNPMOh3svSJUYH0
112 wVoajvZkcVggkcsetoDy+tmS6LipnelmY1NrUGXPQCE53oSmofCi8i0zl406YKU4AugNovLz
113 n8YGpmdTCqyjTzD3Wj7y/eGn1c/Fdqbnv1xpHraWiUWi8vPZlNM+lbICp5lbS3elxAId0z7p
114 jGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBH6HdsCRgCx/++8bGHdsit
115 uAG0aRGIh9g3RnrDvxpYsqamaCe29/g0yMgH7F/yl3oUCRh+2EL4KxYBFAkYftgK0NObaVX3
116 CQHYWM0L7qlHN9VqQObZpeCyFF015dolRzmm3Tvf875ymb1CTfpNGkeEZmOF1OyzVS1l0z7p
117 3zw9gL1CyPxK9U25WiZlPEczLbhni92NOIRrATAtOdObDjKITks417zzaCe29/g0yMgH7F/y
118 l3oUCRh+2IhVpNXv9wmRC0wQichbO9l1B7L2M/DPVm4dFF04+IfRVurIyFs72XUHsvYz8I8e
119 6nd2z9LUGGQPqKgoPaTeyR28P+nXr4Ag2M6SlNObyj2k3snVbgsmbZ34qj5s6s0=
120
121 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PUBLIC SYNONYM DBMS_CLR FOR DBMS_CLR;
SP2-0640: Not connected
SQL> DECLARE
2 ORCL_HOME_DIR VARCHAR2(1024);
3 BEGIN
4 DBMS_SYSTEM.GET_ENV('ORACLE_HOME', ORCL_HOME_DIR);
5 EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY ORACLECLRDIR AS ''' || ORCL_HOME_DIR || '\bin\clr''';
6 END;
7 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\patch\patch_4659228.sql;
SQL> set echo off
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
...wwv_flow_help
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
timing for: Load Start
Elapsed: 00:00:00.00
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
====================================
postScripts.log -- END
====================================
====================================
PostDBCreation.log -- START
====================================
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='C:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup ;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> execute utl_recomp.recomp_serial();
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> alter user hr password expire account lock;
SP2-0640: Not connected
SQL> alter user ctxsys password expire account lock;
SP2-0640: Not connected
SQL> alter user outln password expire account lock;
SP2-0640: Not connected
SQL> spool off;
====================================
PostDBCreation.log -- END
====================================

There were no CORE*.LOG files.. So here are the other two..
============================
alert_xe.log START
============================
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Nov 09 10:52:59 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:596M/1023M, Ph+PgF:2167M/2459M, VA:1936M/2047M
Wed Nov 09 10:52:59 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=DGAULT.hotsos.com)(PORT=1521))
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=2948
PSP0 started with pid=3, OS id=3468
MMAN started with pid=4, OS id=3600
DBW0 started with pid=5, OS id=3148
LGWR started with pid=6, OS id=4028
CKPT started with pid=7, OS id=2588
SMON started with pid=8, OS id=3868
RECO started with pid=9, OS id=124
CJQ0 started with pid=10, OS id=1892
MMON started with pid=11, OS id=1732
Wed Nov 09 10:53:08 2005
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2344
Wed Nov 09 10:53:08 2005
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
============================
alert_xe.log END
============================
============================
xe_ora_3500.trc START (11:04 AM)
============================
Dump file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3500.trc
Wed Nov 09 11:04:54 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:598M/1023M, Ph+PgF:1863M/2459M, VA:1617M/2047M
Instance name: xe
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 3500, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=0000000
============================
xe_ora_3500.trc END
============================
Message was edited by:
Doug Gault

Install problem in process integrator (wlpi)

Similar Messages

Maybe you are looking for