Problems with Process Integration or non-clusterables objects

We use Weblogic 6.0sp2, Process Integration 2.0, and Windows NT
          Server.
          Some Process Integration' services are non-clusterables, that's to
          say,
          can only be located at primary server (Master), in a master/slave
          cluster architecture.
          Our system needs high availability, but if the master fails, those
          services
          fail too. What must we do?, How we need to configure our cluster?

Hi Sergio!
401 always means: Not Authorized!
Obviously user PIDIRUSER has wrong password. Password has to be set in ABAP Stack using transaction SU01 AND in the Exchange Profile. If you are in SU01 please also check if user is locked. If so unlock it.
After changing password in both areas please restart complete XI/PI engine (ABAP and Java stack).
Hope this helps.
Regards,
Volker

Similar Messages

Weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non clusterable object with jndiName ]

Hi,
I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
I am getting following error during deployment.
Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
     Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
Unable to deploy EJB: SampleBean from Sample.jar:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
clusterable object with jndiName ]
     at weblogic.utils.Debug.assertion(Debug.java:57)
     at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
     at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
     at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
     at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
     at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
     at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
     at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
     at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
     at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
     at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
     at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
     at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Any clue?, what its talking about?
Thanks
Naresh

Hi,
I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
I am getting following error during deployment.
Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
     Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
Unable to deploy EJB: SampleBean from Sample.jar:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
clusterable object with jndiName ]
     at weblogic.utils.Debug.assertion(Debug.java:57)
     at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
     at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
     at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
     at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
     at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
     at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
     at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
     at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
     at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
     at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
     at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
     at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
     at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
     at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
     at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Any clue?, what its talking about?
Thanks
Naresh

Problems with libraries and plugins - non admin account

I''ve got a couple of problems with a fresh install of photoshop on my windows Windows 7 64 bits system.
1. Libraries panel does not work. It displays the following error and interaction is not possible:
2. 3rd party plugins would load their content.
3. In the Creative Cloud Application the apps tab would load and displays the "download error" message:
The funny thing is that all the above errors don't occur on the loacl admin account. So I think this might be a permission problem. I think the most easy sollution would be to work under the admin account, but sadly that's no option (company policy). I am able to extent the rights of the useraccount I work on, but I don't know in wich folders the software needs write permissions. The both Adobe folders in program files and program files (x86) I already changed to full acces for all users. Can someone please help me?

Problems with libraries and plugins - non admin account https://forums.adobe.com/people/pippyn%20stortelder
This is a permissions Error. The other accounts on the computer do have permissions to use / change the administrator settings of these particular items.
There are two ways you can fix this. 1.) contact the admin of the system and let him know your accounts need read access to these items
My Preferred method is:
If you are on a Windows Account, then you can choose those items to run in Administrator mode for all people. ( win7,64bit )
Right click the infinity system for creative cloud (creative cloud icon - you would normally click to start the program. (not the one in your service tray, but the one in your menu area with the square red on it.
choose/click on properties
choose/click compatibility (tab at the top of the window)
Last boxed option on this screen is: Run Program As Administrator, Click that check box.
Click on Change Settings for All Users
in the window that comes up again choose, put an X in the box- the last option, Run Program As Administrator - Click Apply
Click OK
Click OK and the opened preferences window should now be closed.
You should be able to simply invoke the Cloud app now. But you might want to reboot to safe.
Depending on the installation methods used for your add-ons, you may have to perform this same process for all add-ins. I believe that would depend on which account, first installed the add-on and what level of permissions they have.
Good Luck
~elaine.

Problems with accounting integration cProjects

Dear Sirs,
I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
The project is unknown in Accounting
Message no.
DPR_FIN_GECCO006
Diagnosis
Etc..
In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released replicated.
No company code could be determined. Message No IAOM_CPROJECTS001.
In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
Best regards,
Jørgen Ruud

Hello Jørgen,
It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
logic: CPR1 -> model order -> company code
Would you please try the note 875275, if it can help.
In case that it does not help, you can eithter use the Badi method to set it hardly, or create a customer message to let SAP check it.
name of Badi DPR_FIN_GECCO_ATTR
code like following:
      ls_attribute-data_element     = space.
      ls_attribute-value            = '1000'.
      ls_attribute-field_name_orext = 'BUKRS'.
      ls_attribute-fldname_receiver = space.
      ls_attribute-struc_name_copa = space.
      ls_attribute-field_name_copa = space.
      ls_attribute-ext_attr_name    = space.
      ls_attribute-ext_attr_value   = space.
      INSERT ls_attribute INTO TABLE ct_attributes.
regards!
Zhenbo

SMSY define ERP system with Process Integration instance

Hello,
We have connected new installed ERP system (ERP 6.0 EHP3) to central SLD (SAP SM EHP1).
But we can see the strange situation.
SMSY define automatically this ERP system as the system with Process Integration instance but not ECC Server instance.
We have not installed Usage Type PI in the ERP system.
Also we have old ERP system in SLD. It is visible as SAP ERP system with ECC Server instance.
What is the strange behaviour of SMSY? What should we do and how can we correct this definition in SMSY?

Hi,
Check what you have selected as "Main Instance" in SMSY under tab Software Components.
Follow this link.
http://help.sap.com/saphelp_smehp1/helpdata/en/84/24f94a1ae44a14b83529f5890a6ff5/content.htm
Hope this helps.
Feel free to revert back.
-=-Ragu

Problem with Xelsius Integration

Hi,
I have installed licenced version of Business Objects Edge Client tools and also integration kit and Xelsius. When I open the xelsius and trying to connect through manage connection - Data manager -Query As A Web service - getting problem with URL ,which URL do I need to use ?? and also I tried using SAP netweaver connection selected query and its throwing #2302 error,searched forums and found few answers for this error but still not able to fix the issue.Please let me know how to connect to xelsius to QAAWS and also to SAP netweaver connection.
Thanks in advance

Hi
#2032 can have multiple root causes. I would suggest you search on service marketplace for the error #2032 - you will find several entries. Take a look at those use cases and the corresponding solutions.
Ingo

Problem with Interactive forms. Non interactive works fine

I have a strange problem with testing interactive forms . If i test the same test form (FP_TEST_02) without putting an x in the fillable field, i see the PDF fine.
But when I set the fillable filed to x I get a system error and the J2ee error log as follows :
#ADSUSER#41#SAP J2EE Engine JTA Transaction : [412ffffffb2ffffffaa00079]#hostx.domainy.nl_EP1_68334250#ADSUSER#ddcd65206da111dcb70e129e934ec971#SAPEngine_Application_Thread[impl:3]_21##0#0#Fatal##Plain###Client: 055 SystemId: P30 AppName: SAFP
Processing exception during a "UsageRights" operation.
Request start time: Fri Sep 28 10:04:49 GMT+01:00 2007
com.adobe.ProcessingError: Invalid usage right: EmbedFileRights value: Create
I do not understand why. I have added the credetial file for user right "ReaderRights", but this message idicates soemthing with "Create". What am I missing.
(all test reports for the ADS connetions etc work fine, just interactive forms gives this error)
Any help would be greatly appreciated.
Message was edited by:
glenn venghaus

Interesting. I might have a problem like you mentioned.
I am running one SRM50 system (abap+java) and one ECC6.0 (abap)
I want to use ADS from both ABAP stacks. I have configured both and the ADS including interactive forms works from the SRM5 abap system, but has the problems described from the ECC6.0 system.
The abap software components from both systems differ. The working one has aba, basis, apl on level 8, the non woking on 12.
Now which of the abap components is involved and would the older level 8 componenet work with the newer ADS (is it downward compatible). Since I could upgrade the java ADS to the latest level , but do not want to upgrade the abap stack on the SRM5 system.
I am afraid of breaking a working SRM 5 system.

Install problem in process integrator (wlpi)

I'm also having the same problem. and I am using the same config.
Maybe the xml file is corrupt/has bad data?
"Jon Mountjoy" <[email protected]> wrote in message
news:3a1cead5$[email protected]..
Hi Guys,I am trying to run the process integrator - just downloaded it andlicensefrom the downloads.I followed all instructions - and running wlpi.cmd
it actually does startup, everything goesfine, it loads the EJB's etc. and
then it dies with:wlpi: No such license: wlpi *, Weblogic Process
IntegratorNow it does see the license file (If I remove it it tells me it
cannot findit), butthe above message seems to indicate the format of the
file is incorrect orsomething?Any ideas?It looks like this: (I removed the
signature)<?xml version="1.0"?><bea-licenses> <license-group format="1.0"
product="wlpi" release="1.1"> <license component="WebLogic
Process Integrator" expiration="2001-01-15" ip="any"
licensee="BEA Downloads" type="normal" users="5"
signature="blah blah==" /> </license-group></bea-licenses>Removing
the top xml version line doesn't change anything.Running on NT - tried JDK
1.2.2 and JDK1.3.3 - running WL 5.1 SP6 -SQLServer7Regards,Jon

Problems with the selection of text or objects

dear fireworks community!
unfortunately i have problems with my running version fireworks (CS6) and i can't find any solution or even get help via the customer support.
i can't switch between objects with a click, when i've choosen one already. i also can't cancel the entire selection. the only way (to select a new item) is to click on an empty space, hold it and pull the selection over a new item.
another thing is that i cant select a textfield with a doubleclick or switch beteween choosen tools within the usage of a shortcut …
what i already tried:
updating, deinstalling, re-storing preferences, "cleaning" the libraries, installing (this entire scenario for at least three times)
i hope someone of you can help me!
thanks in advance!

incredible!
thank you so much!

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Problem with web service that returns an object with a String that have som

Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
Ariel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Problems with processing files uploaded from Safari browsers

I have a jsp that allows users to upload files via a secure form and the standard html <input type=”file” … > tag.
For complex reasons I need to get the contents of the HttpServletRequest into a character array. Basically my code looks like this:
BufferedReader reader = request.getReader();
char[] ba = (char[]) Array.newInstance(char.class, MAXFILESIZE);
int total = 0;
int charsRead =0;
while ((charsRead = reader.read(ba, total, 1024)) > -1)
total += charsRead;
When the request is submitted by a Safari browser, approximately 70% of the time, the very first reader.read does not return a result. After about 2 minutes, I get a SocketTimeoutException. On the client side, Safari shows a “loading ….” Message and after 5 minutes reverts to a blank screen – unsurprisingly since the server never serves up a response.
By way of comparison, when the transaction is successful, the process takes less than 1 second.
java.net.SocketTimeoutException: Read timed out
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java(Compiled Code))
at com.ibm.ws.io.Stream.read(Stream.java(Compiled Code))
at com.ibm.ws.io.ReadStream.read(ReadStream.java(Compiled Code))
at com.ibm.ws.http.ContentLengthInputStream.read(ContentLengthInputStream.java(Compiled Code))
at com.ibm.ws.io.ReadStream.read(ReadStream.java(Compiled Code))
at com.ibm.ws.webcontainer.http.HttpConnection.read(HttpConnection.java:342)
at com.ibm.ws.webcontainer.srp.SRPConnection.read(SRPConnection.java:200)
at com.ibm.ws.webcontainer.srt.SRTInputStream.read(SRTInputStream.java:80)
at com.ibm.ws.webcontainer.srt.http.HttpInputStream.read(HttpInputStream.java:312)
at java.io.InputStream.read(InputStream.java(Compiled Code))
at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java(Compiled Code))
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java(Compiled Code))
at java.io.InputStreamReader.read(InputStreamReader.java(Compiled Code))
at java.io.BufferedReader.fill(BufferedReader.java(Compiled Code))
at java.io.BufferedReader.read1(BufferedReader.java(Compiled Code))
at java.io.BufferedReader.read(BufferedReader.java(Compiled Code))
This problem occurs regardless of file size and even if Safari is told to report itself as firefox. This problem has not once occurred with any of IE 5,6 or 7 or Firefox 1.* and 2.*
I have not been able to test this with Safari 3 Beta for Mac or Windows.
Environment:
Client is Mac OS-X 10.4.10 with Safari: 2.0.4
Server is Websphere 5.1

Since a few hours, I have the same problem like you. I uninstalled Firefox, because I thought it was a problem with it, but then i started Safari to redownload Firefox and guess what happened.. nothing. I can't download anything. don't know why. does anyone know whats wrong??

Problems with Lync integration in App-V Package for Office 365 ProPlus

We have problems with setting Lync 2013 to automatic start after Windows start with Office 365 ProPlus App-V Package made by Office Deployment Tool. We use latest version for both (ODT and download package) at Windows 7 Enterprise 64 bit.
We have done this for Lync 2010 and also for Lync 2013 (MSI installations) and it works correctly.
User can choose to start Lync automatically, but this settings is ignored and in virtual registry is set wrong. We look for possible ways to set this by GPO (in ADMX is not this option available) by inserting in virtual registry with Package ID and user
SID in registry path.

Usually setting apps to auto start sets a registry key under HKCU\Software\Microsoft\Windows\CurrentVersion\Run, but since this registry key is inside the virtual environment, Windows does not read it at logon.
The workaround is to either set this key in the native registry (perhaps by an App-V script), or easier still, just copy the shortcut to the Start Menu\Programs\Startup folder. Since you can't really modify Office 2013 packages with the sequencer, you'd
have to add this shortcut by modifying the deployment config file.
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Problems with Process Integration or non-clusterables objects

Similar Messages

Maybe you are looking for