Install Weblogic 12c zip for developement on Windows 7
I have downloaded wls1211_dev.zip for development purpose (instead of full install using windows installer), for installing on the windows 7 (64 bit). After extracting the zip contents, I set up the environment variables for JAVA_HOME, MW_HOME and JAVA_VENDOR as stated in the readme.txt included in the zip distribution. I also made sure to set the environment variables using 8.3 names (old DOS names) by using dir /x command. Here are the environmental settings:
E:\WLS12c>echo %JAVA_HOME%
C:\PROGRA~1\Java\JDK17~1.0_0\bin
E:\WLS12c>echo %MW_HOME%
E:\WLS12c
E:\WLS12c>echo %JAVA_VENDOR%
Sun
But every time I run configure.cmd, I get the following error:
(I checked the permissions on the directory where I have unzipped and it is full control for me (not an administrator user). I tried to run the configure.cmd using administrative user but the same result). I can also navigate to the directories using 8.3 names. I am able to create delete and update files and folder in the target directories as non-administrative user. I have no idea why I should be getting the following errors.
WebLogic Server 12c (12.1.1.0) Zip Configuration
MW_HOME: E:\WLS12c
JAVA_HOME: C:\PROGRA~1\Java\JDK17~1.0_0\bin
783 jar files are being unpacked.
Please wait, title bar will show progress ...
The system cannot find the path specified.
-- above line repeated I guess 783 times
"ACLs are being setup for E:\WLS12c Please wait..."
The system cannot find the path specified.
The WebLogic Server wasn't found in directory E:\WLS12c\wlserver\server.
Please edit the setWLSEnv.cmd script so that the WL_HOME
variable points to the WebLogic installation directory.
Your environment has not been set.
The system cannot find the path specified.
I will appreciate your help in this regard.
Thanks in advance
Salman
Hi,
This issue usually occurs when you install WebLogic Server using generic jar installer and when launching installation with incorrect JDK version.It may be improper JDK installation or incorrect JAVA HOME setup at OS level.
To resolve this issue, uninstall current WebLogic installation using generic.jar installer that is referring incorrect JDK and relaunch the installation with correct JDK by setting correct JAVA HOME system variables. Below are steps to be followed to address this issue.
Un-install WebLogic from your machine.
If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
Run the installer as follows:
Open a command prompt
Change directory to \JDK_64\bin folder and execute:
java.exe -jar -Xms1024m server1001_generic.jar
After the installation is completed you can proceed to safely run the Configuration Wizard (config.cmd)
Regards,
Kal
Similar Messages
-
can i install adf 11.1.1.6 on weblogic 12c ?
then , upgrade adf 11.1.1.6 up to 11.1.2.3 (JDeveloper) ?
and there is any guide to install weblogic 12c and adf 11.1.1.6 ??
can any body tell me , it 's urgentAFAIK, ADF is not currently supported in WLS 12.1.1 version.
-
Installing Weblogic 12c on windows server 2008
Trouble installing Weblogic 12 on windows server 2008 ,i have oracle 11g databse in the same system.Now i am trying to install Oracle Weblogic 12 ,but WLS requires JDK 1.6 as a minimum ,after i install the Oracle11g database it automatically installed the Jdk 1.5 ..now how can i go about and install Weblogic 12 .
install JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c. -
Cannot install SQL Server 2008 R2 Developer on Windows 8.1
I am unable to install SQL Server 2008 R2 Developer edition on Windows 8.1 Enterprise evaluation and about 3/4 of the way through the installation I get this error msg:
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0&EvtType=0x88792597%25400xBB814387
This is my log file:
Overall summary:
Final result: User cancelled
Exit code (Decimal): 0
Exit message: User cancelled
Start time: 2014-04-23 23:49:10
End time: 2014-04-24 00:03:44
Requested action: Install
Machine Properties:
Machine name: PC
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: F:\My Files\My Downloads\EXISTING\SQLServer2008R2Dev\SQLFULL_ENU\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: PC\computername
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PC\computername
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\SystemConfigurationCheck_Report.htm
I tried installing as adminstrator and in compatability mode with Windows 7/Vista but that didn't work. Trying to install from the dvd or from the extracted files in my drive made no difference.
I am now wondering if there is a download link for SQL Server 2008 R2 Developer edition with SP2 included (i.e. not just SP2 but the whole application (5GB+) otherwise I am not sure how to install this.Hello,
1. Please refer to solution provided in below thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/61d56f64-2575-4a58-9503-84579476afaf/sql-server-2008-setup-error-attempted-to-perform-an-unauthorized-operation?forum=sqlsetupandupgrade
2. Make sure you stop antivirus services during running the setup.Make sure you Right click on setup.exe file and select run as administrator.
If above does not works include below as well
3. Please verify WMI service is started.
If WMI is started, consider to repair WMI.
http://windowsxp.mvps.org/repairwmi.htm
Reference
Link
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Install webLogic 10.3.5.0 as windows Service
Hi there;
Looking for install webLogic as windows service; I found some papers that points me to "WL_HOME\server\bin\installSvc.cmd"
as we can see here in [On-Line Manual References|http://download.oracle.com/docs/cd/E21764_01/web.1111/e13708/winservice.htm#START143]
But; the fact is that in my wl_home\server\bin directory I can't see installSvc.cmd ;
wl_home\server is not there any way;
I have wl_home\serverS instead of it ;
Any tips to configure webLogic 10.3.5.0 as windows service ?
Foward thanks
Marcos OrtegaHi Marcos,
Since you were looking in your domain directory, note that you can innstall WLS components like node manager, admin server and managed servers as Windows services (which might be what you are trying to achieve).
- For Node Manager you have the cmd file at WL_HOME\server\bin\installNodeMgrSvc.cmd
- To create a Windows service for the Admin Server:
1. Create a text file named %MIDDLEWARE_HOME%\user_projects\domains\<domain name>\servers\AdminServer\security\boot.properties. Add the following lines:
username=weblogic
password=<the weblogic username password>
2. Create a command script called installAdmServer_Service.cmd which you will want to make sure has lines like:
SETLOCAL
set DOMAIN_NAME=<your wls domain>
set USERDOMAIN_HOME=<path to domain> # e.g., C:\middleware\FMW11g\user_projects\domains\ClassicDomain
set SERVER_NAME=AdminServer
set PRODUCTION_MODE=true
cd %USERDOMAIN_HOME%
call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd
call "<your middleware home>\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
3. Then run "installAdmServer_Service.cmd", the Service should be installed. It will have a name like "beasvc %DOMAIN_NAME%_%SERVER_NAME%" (e.g. beasvc ClassicDomain_AdminServer). The Service "Startup Type" shouldl be "Automatic".
- To create a Windows service for the Managed Server:
1. Create a text file named %MIDDLEWARE_HOME%\user_projects\domains\<domain name>\servers\[managed_server_name]\security\boot.properties. Add the following lines:
username=weblogic
password=<the weblogic username password e.g manager11g>
2. Create a command script called installWLSFORMS_Service.cmd which has lines like
SETLOCAL
set DOMAIN_NAME=<your wls domain>
set USERDOMAIN_HOME=<path to domain> # e.g. C:\middleware\FMW11g\user_projects\domains\ClassicDomain
set SERVER_NAME=WLS_FORMS
set PRODUCTION_MODE=true
set ADMIN_URL=http://mymachine.mycompany.com:7001
cd %USERDOMAIN_HOME%
call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd
call "<your middleware home>\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
3. Then run "installWLSFORMS_Service.cmd", the Service should be installed and it will have a name like "beasvc %DOMAIN_NAME%_%SERVER_NAME%" (e.g. beasvc ClassicDomain_WLS_FORMS). The Service "Startup Type" will be "Automatic".
Some warnings:
- The ADMIN_URL value should reference the AdminServer hostname and listen port.
- The SERVER_NAME value is case sensitive. For example, if you are creating a MS Windows service for a different managed server such as 'wls_ods1' then the value needs to match the case of the server name otherwise the startup of the server via the MS Windows service will fail.
- Be careful that there are no trailing spaces after each line in the command file - trailing spaces will cause the managed server to fail at startup.
Hope this helps.
-Cris -
Install boot camp update for Trackpad on windows 8.1
Hello Participants,
i want to use my trackpad on a windows 8.1 computer.
I´ m searching a guide for install boot camp 5.1 Update on windows 8.1. I ´m in Germany.
Greetings and thank youHallo Rudegar,
i installed the bloototh 4.0 by "sitecom" USB adapter
below are the bootcamp drivers,
i installed wireless trackpad 64 and also Multitouch trackpad drivers,
it doesen´t work
greetings -
Installing WebLogic 11gR1 zip distro on Ubuntu 10.10
Hi. I'm having a problem installing WebLogic 11gR1, the zip distribution of Ubuntu 10.10.
I created this path:
/usr/local/programs/WebLogic11gR1
I put this in .bashrc
export MW_HOME=/usr/local/programs/WebLogic11gR1
I closed that terminal and opened a fresh terminal.
I moved the *zip distribution into
/usr/local/programs/WebLogic11gR1
I unpacked the zip and tried to run the configure.sh script with variations of
sh ./configure.sh
and I get this error message:
=====================================================
./configure.sh: 19: [[: not found
./configure.sh: 19: -d: not found
ERROR: You must set MW_HOME and it must point to a directory.
where an installation of WebLogic exists. Ensure you point
this variable to the extract location of the zip distribution.
=====================================================
I ran echo $MW_HOME and got
/usr/local/programs/WebLogic11gR1
Which is correct.
Any ideas what is going on and how I can fix it?the config.sh wouldn't pick up my JAVA_HOME either. I opened up the script and found that all it did was call another script, so I ran that script myself with no problems.
-
Install weblogic 12c (12.1.2) in silent mode failed
Hi there
I'm trying to install weblogic 1212 in silent mode, but fail with below error message..and I have try setting the JAVA_HOME variable in user's session or even in .profile, /etc/profile. but still get the same error.. and it looks like it's not because of the JAVA_HOME variable?? or because of other issue? anyone have any suggestion or having experience on fixing the same issue?
Thanks in advance..
Zhou
BTW, I did this in a virtual box running Solaris 10, and I can install it with the UI wizard successfully.. and below is the command I run:
java -jar wls_121200.jar -silent -responseFile /export/home/zhou/silent.xml -invPtrLoc /export/home/zhou/oraInst.loc -ignoreSysPrereqs
out logs:
Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:11
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
Internal Error: Aborting Install
java.lang.NullPointerException
at oracle.as.install.wls.installaction.NextGenWLSInstallAction.setJDKHomeInSilentInstall(NextGenWLSInstallAction.java:270)
at oracle.as.install.wls.installaction.NextGenWLSInstallAction.executeBeforeCopy(NextGenWLSInstallAction.java:252)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteBeforeCopy(InstallActionProviderUtility.java:74)
at oracle.as.install.engine.modules.silent.SilentInstaller.run(SilentInstaller.java:349)
at java.lang.Thread.run(Thread.java:745)Thanks for the reply Puneeth
Yes I did set the oraInst.loc file and the content is:
inventory_loc=/export/home/tdmsadm/oraInventory
inst_group=tdmscore
the output of java -version
java version "1.7.0_55"
Java(TM) SE Runtime Environment (build 1.7.0_55-b13)
Java HotSpot(TM) Client VM (build 24.55-b03, mixed mode)
and I run the command in the user's home directory and the debut output as below:
bash-3.2$ java -jar wls_121200.jar -silent -responseFile /export/home/tdmsadm/silent.xml -invPtrLoc /export/home/tdmsadm/oraInst.loc -ignoreSysPrereqs -debug
Extracting files.........................................................................................
Starting Oracle Universal Installer
Checking if CPU speed is above 300 MHz. Actual 2309 MHz Passed
Checking swap space: must be greater than 512 MB. Actual 1773 MB Passed
Checking if this platform requires a 64-bit JVM. Actual 32 Failed <<<<
Checking temp space: must be greater than 300 MB. Actual 13741 MB Passed
>>> Ignoring required prerequisite failures. Continuing...
Preparing to launch the Oracle Universal Installer from /var/tmp/OraInstall2014-05-19_02-05-02PM
Command line arguments:
Arg:0:/usr/jdk/instances/jdk1.7.0_55/bin/java
Arg:1:-cp
Arg:2:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/mw/common/framework/jlib/engine-nextgen.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/mw/common/framework/jlib/message.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/mw/common/framework/jlib/oneclick.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.dms_11.1.1/dms.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_11.1.1/ojdl2.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_11.1.1/ojdl-log4j.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.dms_12.1.2/dms.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_12.1.2/ojdl.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_12.1.2/ojdl2.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/modules/oracle.odl_12.1.2/ojdl-log4j.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/share.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/ewt3.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/oracle_ice.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/ohj.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/help-share.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/jewt4.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/jgoodies-looks.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oracle_common/jlib/wizardCommonResources.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/installer-launch.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/jsch.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/ojmisc.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/xml.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/InstImages.jar
:/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/modules/orai18n-mapping.jar
Arg:3:-Doracle.installer.extjre=true
Arg:4:-Doracle.installer.paramFile=/var/tmp/orcl8495994601759597301.tmp/Disk1/install/oraparam.ini
Arg:5:-Doracle.installer.nlsEnabled=true
Arg:6:-Doracle.installer.oui_loc=/var/tmp/OraInstall2014-05-19_02-05-02PM/oui
Arg:7:-Doracle.installer.debug=true
Arg:8:-Doracle.installer.startup_location=/var/tmp/orcl8495994601759597301.tmp/Disk1/install/intelsolaris32
Arg:9:-Doracle.installer.prereqConfigLoc=/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/mw/wls/prereq
Arg:10:-Doracle.installer.library_loc=/var/tmp/OraInstall2014-05-19_02-05-02PM/oui/lib/intelsolaris32
Arg:11:-Doracle.installer.unixVersion=5.10
Arg:12:-Doracle.installer.bootstrap=true
Arg:13:-Doracle.installer.scratchPath=/var/tmp/OraInstall2014-05-19_02-05-02PM
Arg:14:-DisNextGen=true
Arg:15:-Doracle.installer.launch_loc=/export/home/tdmsadm
Arg:16:-Doracle.installer.jre_loc=/usr/jdk/instances/jdk1.7.0_55
Arg:17:-mx512m
Arg:18:-XX:MaxPermSize=512m
Arg:19:-Doracle.installer.appendjre=true
Arg:20:-d32
Arg:21:oracle.sysman.oio.oioc.OiocOneClickInstaller
Arg:22:-scratchPath
Arg:23:/var/tmp/OraInstall2014-05-19_02-05-02PM
Arg:24:-sourceType
Arg:25:network
Arg:26:-timestamp
Arg:27:2014-05-19_02-05-02PM
Arg:28:-paramFile
Arg:29:/var/tmp/orcl8495994601759597301.tmp/Disk1/install/oraparam.ini
Arg:30:-silent
Arg:31:-responseFile
Arg:32:/export/home/tdmsadm/silent.xml
Arg:33:-invPtrLoc
Arg:34:/export/home/tdmsadm/oraInst.loc
Arg:35:-ignoreSysPrereqs
Arg:36:-debug
Log: /export/home/tdmsadm/oraInventory/logs/install2014-05-19_02-05-02PM.log
Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Verifying data......
Internal Error: Aborting Install
also the install2014-05-19_02-05-02PM.out file as below:
Native library not found in /var/tmp/OraInstall2014-05-19_02-05-02PM/oui/lib/intelsolaris32; trying standard locations
java.lang.UnsatisfiedLinkError: Can't load library: /var/tmp/OraInstall2014-05-19_02-05-02PM/oui/lib/intelsolaris32/liboraInstaller.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1854)
at java.lang.Runtime.load0(Runtime.java:795)
at java.lang.System.load(System.java:1062)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:1018)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:159)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:162)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:532)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:486)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:439)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:661)
Native library not found; using generic implementations
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1886)
at java.lang.Runtime.loadLibrary0(Runtime.java:849)
at java.lang.System.loadLibrary(System.java:1088)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:1040)
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:159)
at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:162)
at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:532)
at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:486)
at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:439)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:661)
Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
Executing generic command key: mountpt=[/bin/sh, -c, /sbin/mount | /bin/cut -f3 -d' ']
Internal Error: Aborting Install
java.lang.NullPointerException
at oracle.as.install.wls.installaction.NextGenWLSInstallAction.setJDKHomeInSilentInstall(NextGenWLSInstallAction.java:270)
at oracle.as.install.wls.installaction.NextGenWLSInstallAction.executeBeforeCopy(NextGenWLSInstallAction.java:252)
at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteBeforeCopy(InstallActionProviderUtility.java:74)
at oracle.as.install.engine.modules.silent.SilentInstaller.run(SilentInstaller.java:349)
at java.lang.Thread.run(Thread.java:745)
but still have no clue of what went wrong..
Zhou -
Installing OS X iPhone for developing, necessary? If so where to download?
According to documentation here:
http://developer.apple.com/iphone/manage/devices/howto.action
It says "To run your code on an Apple device, you will need to install OS X iPhone onto each development device and "restore" each device to a development state."
"1 Download the OS X iPhone Disk Image (.dmg) from the iPhone Dev Center for the Apple device you are using.
2 Connect your device to your Mac, close iTunes and launch Xcode.
3 Once the device is detected by Xcode, select ‘Use for Development’ when prompted."
My questions are is this step necessary? If so, where can I download the OS X iPhone that is supposed to be available at the iPhone Dev Center?
Thanks,
FredSo after some more experimentation, I did discover that the the iPhone 2.0 software is installed automatically through iTunes. This step is not required. The problem I was having after a fresh install of the latest iPhone SDK (and uninstalled via the scripts included in Beta SDK's) was the following message after setting up all my signatures in KeyChain:
"Your mobile device has encountered an unexpected error (0xE8000001) during the install phase: Verifying application"
I found that the way to fix this is right-clicking on the Targets->MyApplicationName and then in the Properties dialog setting the identifier for my App Id associated with my Provisioning Profile.
Hope that helps someone -
Upgrading Weblogic 12c domain for JRF support
Problem :
1. Have to install WLS & configure SSO (via ohs)
2. to configure SSO, i need the WLS domain to be JRF enabled
but i am unable to upgrade it.
I have installed WLS using : fmw_12.1.3.0.0_wls.jar ( & ohs using fmw_12.1.3.0.0_ohs_linux64.bin)
(latest jdk 1.8 used)
I have followed following link:
https://blogs.oracle.com/groundside/entry/setting_up_a_standalone_weblogic
but it didnt help. Can some one guide me the versions of WLS, ohs i need to install & steps i need to follow (for SSO enabling WLS) ?
I tried again, when installing ohs using : fmw_12.1.3.0.0_ohs_linux64.bin . i get following error message:
INST-07551: Not all depenedent featuresets for install type "Collocated HTTP Server (Managed through WebLogic server)" could be found. The following prerequisites were found to be missing: em_fmc - 12.1.3.0.0
Feature sets installed at Oracle Home:
WebLogic Server 12.1.3.0.0
Core Server
Core Application Server 12.1.3.0.0
Coherence Product Files 12.1.3.0.0
Web 2.0 HTTP Pub-Sub Server 12.1.3.0.0
WebLogic SCA 12.1.3.0.0
WebLogic Client Jars 12.1.3.0.0
Administrative Tools
Administration Console Additional Language Help Files 12.1.3.0.0
CIE WLS Config 12.1.3.0.0
Database Support
Thirdparty JDBC Drivers 12.1.3.0.0
Open Source Components
Third Party Jackson 12.1.3.0.0
Third Party Jersey 1.18.0.0.0
Third Party Maven Apache 3.0.5.0.0
Oracle Installation Infrastructure
OPatch 13.2.0.0.0
Thanks,
BalaHi Bala,
What SSO product are you going to be using?
To get WLS 12.1.3 and OHS 12.1.3 in a domain you will need an oracle database because there are required schemas.
The link you are following does not have this nor does it incorporate OHS.
You first need to decided if OHS needs to be in the WLS Domain or if it can be standalone because this is going to change what you need.
1 Planning Your Oracle HTTP Server Installation (12c (12.1.3))
If Oracle HTTP Server in a WebLogic Server Domain then you should be installing the infrastructure:
2 Installing the Oracle Fusion Middleware Infrastructure Software (12c (12.1.3))
This includes JRF and the other things required to have OHS in the WLS Domain.
(These are the bits you are missing and why you see "Not all dependent featuresets for install type "Collocated HTTP Server (Managed through WebLogic server)" could be found." )
Once the infrastructure is installed you can then install OHS into that Oracle Home:
2 Installing the Oracle HTTP Server Software (12c (12.1.3))
Then configure the schemas, infrastructure, and ohs component(s).
3 Configuring Oracle HTTP Server in a WebLogic Server Domain (12c (12.1.3))
Read carefully:
"If you have not created the Oracle Fusion Middleware Infrastructure domain, you can create it at the same time as that of Oracle HTTP Server. For instructions, see "Configuring your Oracle Fusion Middleware Infrastructure Domain" in Installing and Configuring the Oracle Fusion Middleware Infrastructure. However, in Task 9 "Selecting Advanced Configuration", ensure that you select System Components too. When you reach the System Components screen, follow the instructions in this guide, beginning from Task 7."
Also, JDK 8 is not certified. See the certification matrix.
http://www.oracle.com/technetwork/middleware/fusion-middleware/documentation/fmw-1213certmatrix-2226694.xls -
Cannot install full solution package for 2600n in Windows 7
I have downloaded and run the Full Solution Package (hp_CLJ_2600n_Full_Solution-v20110217-50132926-RC5-Signed) for the Color Laserjet 2600n Printer networked to my Windows 7 computer. The Plug and Play Driver installed properly but when I try to install the Full Solution, I receive:
The printer installation failed. Please try the following steps after you click Close.
1. Ensure the USB cable is disconnected from the printer.
2. Uninstall.
3. Rerun the CD install software.
There is no USB cable (it is TCP/IP). I do not see anything to uninstall in add/remove programs. What is the solution to this installation. I must note that the printer does work with the new driver. There is a problem in that messages from the printer do not popup. I get a dialog instead from the Interactive Services Detection service.
/s/ Alan Auerbachalanauerbach
This should get you up and running. Give the steps a shot and let me know the results:
http://goo.gl/J35q5
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
We would like to develop an application for the Oil/Gas market utilizing the NI-4050 in Compaq IPAQ devices running Windows CE.
NI does have C source code available to program the NI-4050 using register level programming (RLP) in Windows CE. If you are a proficient C programmer and have some experience doing RLP and/or driver level development, you can use this code to access and program the 4050 in Windows CE. Contact your local NI sales person to receive a copy of this code.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense -
Installing SBO 2007A PL47 for use on Windows Terminal Server 2008
SAP has announced it supports Windows Server 2008 32 bit. Does this mean it will also support Windows Terminal Server 2008 32 bit for hosted clients? Any input will be appreciated
Hi,
There is annoucment only of Windows Server 2008. You can check the status on service Market place under Supported platforms.
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Under Product Availablity
Regards
Vikas
SAP Business One FOrums Team
Edited by: Vikas Rastogi on Mar 12, 2009 10:22 PM -
Weblogic 12c on windows 2003(32bit)
Hi guys,
I installed weblogic 12c on windows
2003(32bit)(oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32.exe);
I created schedule job (startup weblogic console on server startup);
The weblogic instance run java applications;
Every second day the job stopped and I manually restarted it; We are
planning go production and it is not acceptable behaveir;
Can you help? What should check or change in setting?
Please help
Thanksinstall JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c. -
Cannot install driver software for N8-00, Windows ...
I'm having a lot of trouble getting any Nokia software to work on my PC.
(This was the same for my previous Nokia 2730.)
The first time I connected my N8-00 to my PC, running Windows Vista 32, my PC worked out it was an N8-00 and a window appeared asking me to confirm AutoPlay settings - there was a checkbox (which I checked), but no OK button.
I could go to Start > Computer and see the N8-00 there though.
I opened the device and found the Ovi Suite Installer and tried to run that (because the downloaded version didn't work either - I'll start another thread about my troubles with Ovi Suite) but it didn't work.
I then removed the phone from my PC.
Now whenever I connect my phone to my PC Windows tries to install the N8-00 drivers and fails, giving me these messages:
"Found New Hardware - Nokia N8-00"
"Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
Nokia N8-00 USB Phone Parent
No such interface supported
If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Obviously not being able to connect my phone to my PC is very frustrating and restricts many of the features I wish to use.
Help in solving this issue would be very greatly appreciated.Could someone of you resolve the problem about the connection of N8-00 to PC??
I have the same problem and I can't resolve it.
Best regards!!
Maybe you are looking for
-
Schedule Background Job whenever new message WVINVE
Hi All, I have following requirment:- Schedule Background Job with a ABAP program, whenever new message type WVINVE posted in SAP inbound. I am confused in "Event" which i select in SM36. Or, is there any other method to trigger a background report,
-
HT1365 Apple TV and Netflix problem
My apple TV works well with all the apps on it except with Netflix. Lately it will quit and state " Your Apple TV isn't connected to the Internet " to check your network setting go to etc etc . I do that and go to for instance Utube and there is NO
-
System Preferences - Keyboard & Mouse
I've some trouble with my 2 macbooks in the system preferences / keyboard&mouse , after update my leopard. The panel do not appear. Did you have some explanation about it? Thanks for att Gugu
-
Strange error when doing anything with yaourt
Hi I have just installed yaourt from the AUR on my arch install (with LXDE, if that makes a difference) and whenever I do anything with it, it gives me the following error: shell-init: error retrieving current directory: getcwd: cannot access parent
-
Hi All, In sub contracting for each vendor separate tolerance norms are there for each vendor. For Ex: To get 100 nos of SF from diiferent vendors norms are there for vendor ABC 5% tolerance for vendor CBA 2% tolrence means for vendor out of 1