Installing SBO 2007A PL47 for use on Windows Terminal Server 2008

SAP has announced it supports Windows Server 2008 32 bit. Does this mean it will also support Windows Terminal Server 2008 32 bit for hosted clients? Any input will be appreciated

Hi,
There is annoucment only of Windows Server 2008. You can check the status on service Market place under Supported platforms.
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Under Product Availablity
Regards
Vikas
SAP Business One FOrums Team
Edited by: Vikas Rastogi on Mar 12, 2009 10:22 PM

Similar Messages

Is BPC 7.0 compatible with Windows Terminal Server 2008?

Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
-Brian

Cannot quit Visual FoxPro (Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1)

Hi everybody:
This is not the typical question about this error, because the problem here is not about how to quit (CLEAR EVENTS then QUIT). The really and weird problem is that our application do no execute the error trapping routines (Try/Catch and ON ERROR) and tries
to directly Quit.
I have never seen something like this before, error trapping routines not executed.
I try to explain the problem better:
- The user click on the Citrix icon of our App
- Citrix shows the executed processes (establishing connection, applying user config, loading profile, etc)
- The Application (VFP 9 SP2) is started and in any moment, while loading, occurs an error that is not handled by error handlers, and it executes a "kind" of a Quit command, that we detect because have a ON SHUTDOWN to catch it, then the App shut
down and the user must click the Citrix icon and start all over again, up to 7 times, when the App really load and work.
- I think that it is useful to make clear that no QUIT command is really causing this, just the behaviour of the QUIT when an error occurs, but just while loading. If the App get completely loeaded, then everything works as expected
Infraestructure:
- Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1
- There are up to 50 concurrent users max in every virtualized server
- More than 10 GB of free disk space / Up to 4 GB ram
- RAM Memory is never used to the max
- CPU (Intel Xeon) is never used to the max (up to 90% in some cases)
- Data (DBFs for temporal work) ar on local drive, not over network (to avoid network known problems with smb2-3)
- There are connection to a Oracle 11 database for permanently storing the data
About the errors:
- They are not always the same or in the same place. In example, in one execution could fail the query of SET("Printer",2), in other execution could fail a SET PROCEDURE TO xxx ADDITIVE (sometimes already loaded), in other could fail a "DO
WHILE .T." in a init event.... completely crazy, and in all cases the errors are not thrown, not a single error code, the App just try to quit, as if ALT+F4 where pressed.
- All this does not happen allways to everyone, but happens many times in the day to many many users as to be worried
- The same user can have this error many times a day, but not allways
- Some of the problems started when migrating to Windows Terminal Server 2008, but didn't notice nothing special in the beginning, but a year later (last 2014) problems tend to go worse
Tried solutions:
- For the "SET PROCEDURE TO xxx ADDITIVE" error, a "IF xxx $ SET('PROCEDURE')" check was added
- The "SET('Printer',2)" check was moved out of initialization code, so it executes when user want to print the first time. In this case was neccesary to talk with IT guys to map a default printer after the App runs, and not in background, as it
was.
- Other checks and modifications was made to minimize posibility of errors
- Adding a timeout of 5 secs in the start of the program, to force a wait
- Restart of virtual servers (not the phisical) every 3 weeks
What I suspect:
- Some Microsoft optimization (memory?, process execution?) in WTS-2008 may interfere?
- Some VMWare memory management may interfere with WTS-2008?
- Some Citrix management may interfere with both?
- Server degradation because of day to day use
Results until now:
- Apparently, adding the timeout to force 5 secs delay and the restart of the server have made a notable enhancement in App start and running
with far fewer
errors
Has
this happened to anyone?
Thanks! o_O
Fernando D. Bozzo / Madrid (Spain)

I never had this type of problems, but somewhat similar start up problems. I'd say it indicates resource problems. Low RAM can cause many unpredictable things. In my case loading much data at the begin of an application caused out of memory errors, which
were reported and logged normally, though.
I made a small tool using Windows API functions GetPerformanceInfo and GetProcessMemoryInfo, you'll find declaration and usage like usual at the News2News site. It's a bit lengthy and cluttered, but pretty much what you find there anyway, so I'll not post
my utility code.
I could quite clearly see how many users degraded available memory per session and at some time no further instance of the application was possible on the server. In my case RDP was used to start the app, Citrix will be quite the same, in the end the application
runs on some server and users see the remote running application.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Bug: CR XI on Windows Terminal Server 2008

We have a problem when printing a report for example with 2 columns, where the 1st column's content is larger than the width of that column, then the content is printed through colum 2.
But only when:
working on remote on Terminal Server 2008
when printing on a remote printer (redirected)
There's no problem:
in the preview window
when printing to a local printer of the server
on Terminal Server 2003
Any ideas?
Tx
Patrick

You mentioned it worked fine in the preview window, so does the issue only show up when not printing with data?

Adobe Acrobat X Pro - Windows Terminal Server 2008

Hi All,
Im hoping some one maybe able to help me on this, We have recently purchased the Adobe Acrobat X Pro for one of our clients and have just installed it onto their Windows 2008 x32 Terminal server. Inatall appeared to be fine, no errors reported and nothing logged into the event viewer. However we seem to be having issues with it... I did read a PDF guide early last week that said the X Pro should work fine on a Server 2008 - The install instructions where rather straight forward and I thought their would have been more to it than just installing it via the control panel.
The issue we have is the program opens up ok and is usable for about a min and it then crashes with no obvious reason, From looking in the event log it appears to report issues with the PDApp.exe and the Kernel32.dll - Has anyone come across any similar issues?
Many Thanks

Hi,
You can also send the crash dump by following the below mentioned steps:
Install WinDbg from http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
Launch WinDbg via the shortcut
Click File->Open Executable
Select Acrobat.exe from "C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe" and hit "OK"
Remember to press "g" and hit enter when you encounter the first breakpoint and then you will see a text "Debuggee is running" and Acrobat will be launched
Open whatever file is it that produces the crash in Acrobat.
When you have successfully reproduced the sceanrio causing the crash/freezing of Acrobat X, enter the below command in the WinDbg terminal
.dump /ma c:\temp.dmp (Hit enter)
This will produce the crash dump at C:\ by the name of temp.dmp
After that please upload the dump (compress the dump using WinZip or likewise) at some third party sites and provide the link for the same. Also, if it’s possible could you share the PDF as well, for which your application crashes on a consistent basis.

Thunderbird cannot open attachment after idle for several hours on Windows Terminal Server 2008 R2 Enterprise

We are using Thunderbird on WTS2008 R1
Cannot open attachment after thunderbird is launched for a short period of time. Tried to save attachment but the attachment saved actually comes with 0kb. Thunderbird works fine after restart itself, not sure if any settings can fix this?

Hi Darrkon,
I suggest checking the status of the HealthMailbox on each of servers.
Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted. Once that service is restarted, it will recreate any mailboxes that it needs.
More details in the following similar thread, just for your reference:
BSOD after creating DAG
http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
Thanks
Mavis
Mavis Huang
TechNet Community Support

Sap gui on windows terminal server

Hi,
are there best practices to install sap gui 7.30 on a Windows terminal Server 2008 r2?
Regards
Zulma

hi Zulma,
Please follow the step by step guide.
SAP GUI 7.30
Example
How To Install SAP GUI 7.30 on Windows 8
SAP GUI for Java 7.30 Release Notes
Regards,
Jamil

Install SAP GUI 7.20 on Windows terminal server

Hi,
I would like to install SAP GUI 7.20 on a Windows Terminal Server and configure it so that all users on the terminal server share a common configuration. As the installation is now all users have to define the systems in GUI the first time they start it, but I would like to do this globally. Is this possible?
Best regards,
Thor-Egil

> estimated 20 or more users who will be using the WTS to do their specific transaction. How much ram do we need to put in the WTS to handle 20 or more users?
This depends on what the users will do on that system. I suggest you contact the hardware vendor for a sizing of the machine.
> and follow up question, do you recommend using terminal servers?
It's an easy way to centralize the administration, you have got only one SAPGui installation.
Markus

Problem with Windows Vista Server 2008 - Font characters replaced with square blocks on login screen

Hi! Last week, I set up a server for a client (Windows Vista Server 2008). Everything was working fine until this week when I did a remote login, and the server's screen shows all blocks instead of character (ie. "Administrator" shows up as Rectangular blocks) - and when I type in the password box, my characters come out the same blocks. The computer lets me login like this but then when the desktop displays, all texts is Blocks - like the windows default font is missing.
Anybody else run into this mystery and is there a fix?
Thanks.

Hello,
Based on my experience, this issue might be caused by compatibility issues of video card driver and language options settings.
I’d like to suggest you try the following steps to fix the issue.
1.    Please check whether you have installed correct video card drivers on both client and server machines. You’d better download the latest drivers from Video card manufacture and reinstall the drivers on both of the machines.
2.    Please confirm whether the regional and language options settings on client and server machines are the same. If not, please temporarily change the settings on two machines to be the same and have another test.
3.    If you use some third-party remote desktop connection tools to connect to the server, please have another try with Windows build-in remote desktop connection.
I hope this helps, thanks.
Regards,
Neo Zhu

UC540 - Opening multiple instances to a callconnector on a Windows Terminal server

Hi all,
My customer has an issue with his UC540 BRI. He uses a Windows-terminal Server and wants access to the callconnector with several computers. According to him, does the software only function on single desktop computers. Currenly, he is only able to open the callconnector on one computer at the same time.
His environment:
UC540W-BRI-K9
Cisco L-SW-SCC-Server
Cisco L-SW-SSC-8ADVANCED
Is there a way to solve this problem? Do you need more information?
Thank you and best regards
Felix Sonnborn

Hello Alex,
Thank you for your response!
Yes, that is also my point of view.
Basically, the customer is interested in a centralized adressbook, which can be contacted via iPhone and the 7900es - is this possible?
Thanks and best regards
Felix

Creative Zen Micro Photo not tested for use with Windows so cant install it! Please help

Heya! Basically when installing the software for Microphoto it stops saying that as my device hasn't been tested for use with windows it cant install for fear of corrupting my laptop! Can anyone help me overcome this because i installed it aagges ago and it let me have the option of continuing the installating, but i had 2 uninstall it and upon reinstalling it it does not give me the option to continue. It just cancels the installation. Can someone please help me as this is driving me nuts!! Y is it that technology is continuosly mucking up grrrrr!
Lucy

Are you runnning Win XP SP2? If so, this is a standard warning about unsigned drivers, but it should still give you the option to "continue anyway" to complete the installation.
Also, make sure you have Windows Media Player 0, as this is needed for Windows XP (drivers) to recognize your MicroPhoto.

How to install Authorware Web Player for use with Win 7/8?

Hi, has anybody had any experience installing the Authorware Web Player for use with Windows 7 & Windows 8? I'm looking at upgrading computers from Windowx XP on a standalone network (no internet access), and need to be able to display our Authorware content accessed via an LMS.

Moving this discussion to the Authorware forum.

Entry Point Not Found Errror while Install SBO 2007A client

While I am trying to Install SBO 2007A client (SP01 PL05) this Error shows:
" SAP Business One.exe - Entry Point Not Found -
The procedure entry point ?CompareNoCase@SBOString@@QBEHPBG@Z could not be located in the dynamic link library SAP Business One.exe"
Your help please
BR,
Meital

Log in as Admin
and it worked.

Is there an upgrade to Photoshop Elements 5.0 for use with Windows 8?

Is there an upgraded to Photoshop Elements 5.0 for use with Windows 8?

yes, photoshop elements 11 should be compatible with win 8 and there is an upgrade path here: http://www.adobe.com/products/photoshop-elements.html
(compatibility info: http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/ProductViewerWithD efaultFilters?Architecture=X64&CurrentPage=0&TotalPages=-1&ShowCriteria=10%20Results%20Per %20Page&SortCriteria=Relevance&IsSearchWithinFilterAvailable=False&FilterByCompatibility=A LL&TextSearch=Photoshop&AbsolutePage=-1&LastRequested=13&LastSearchTerm=Photoshop )

Ipod Nano ipod needs to be reformatted for use with windows

I keep getting ipod needs to be feformatted for use with windows, how do i do this, I can't get it off.

On the PC, click here and follow the instructions.
(27135)

Installing SBO 2007A PL47 for use on Windows Terminal Server 2008

Similar Messages

Maybe you are looking for