Installation error Nexus 1000v
When I want to install the Nexus 1000v on a standalone ESX1 5.1 installation I get at Step 5. Confirmation the error (see attachment):
Unable to retrieve deployed VM. Please check VC connection
It's an easy setup with 4 vlans on a trunk, and the managment ip of the ESXi server in vlan 1 which is allowed on the trunk.
What am I doing wrong..... Please help..
I am getting the same error when trying to deploy a new VSM. Tried Layer 2 standard and custom, adjusted different things but can't get it to work. Getting that same error:
Unable to retrieve deployed VM. Please check VC connection.
I am trying to add the VSM with the name '87457-n1kv01.den03'. I checked the hostd.log file and see a bunch of errors. Any idea how to fix this?
2014-01-31T23:02:02.872Z [50281B70 info 'vm:Vix: [34498 foundryVMPowerOps.c:980]: FoundryVMPowerStateChangeCallback: /vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx'] vmx/execState/val = poweredOff.
2014-01-31T23:02:02.872Z [FF9475B0 verbose 'Default' opID=5755438a-77-db-65-43 user=vpxuser] SetVmHandle /vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx 10485766
2014-01-31T23:02:02.872Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Upgrade is required for virtual machine, version: 7
2014-01-31T23:02:02.876Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Time to gather config: 3 (msecs)
2014-01-31T23:02:02.876Z [50FC2B70 verbose 'Hbrsvc'] Replicator: ReconfigListener triggered for config VM 14
2014-01-31T23:02:02.877Z [50FC2B70 error 'Hbrsvc'] Failed to retrieve VM config (id=14)
2014-01-31T23:02:02.877Z [50FC2B70 error 'Hbrsvc'] Replicator: VmReconfig failed to retrieve replication config for VM 14, ignoring: vim.fault.ReplicationVmConfigFault
2014-01-31T23:02:02.877Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Current VM Tracking state: disabled
2014-01-31T23:02:02.877Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] CheckForOpaqueNetworkImpact: VM instance UUID set in spec: [50197f97-da7f-d145-d8bf-8b41df5732f0]
2014-01-31T23:02:02.877Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] CheckForOpaqueNetworkImpact: opaque network changes in deviceSpec: { [-105->:] [-104->:] [-103->:]}
2014-01-31T23:02:02.878Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Storage policy for disk '/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmdk' not specified.
2014-01-31T23:02:03.265Z [FF9475B0 verbose 'Vmsvc.VmDiskMgr' opID=5755438a-77-db-65-43 user=vpxuser] Disk created successfully.
2014-01-31T23:02:03.267Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present translated error to vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.267Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present failed: vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.267Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present message: Expected device (ide1:0) does not exist.
-->
2014-01-31T23:02:03.268Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present translated error to vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.268Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present failed: vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.268Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Is disk present message: Expected device (scsi0:0) does not exist.
-->
2014-01-31T23:02:03.269Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Setting tracking state for disk w. key -102 to false
2014-01-31T23:02:03.269Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present translated error to vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.269Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present failed: vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.269Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present message: Ethernet adapter 'ethernet0' does not exist.
-->
2014-01-31T23:02:03.270Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present translated error to vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.270Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present failed: vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.270Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present message: Ethernet adapter 'ethernet1' does not exist.
-->
2014-01-31T23:02:03.270Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present translated error to vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.270Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present failed: vim.fault.GenericVmConfigFault
2014-01-31T23:02:03.270Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] NIC: is present message: Ethernet adapter 'ethernet2' does not exist.
-->
2014-01-31T23:02:03.271Z [FF9475B0 info 'Vimsvc.ha-eventmgr' opID=5755438a-77-db-65-43 user=vpxuser] Event 213 : Assigned new BIOS UUID (42197e34-23f7-c33f-cf97-6edc92e8a120) to 87457-n1kv01.den03-1 on 87457-esx01.den03 in ha-datacenter
2014-01-31T23:02:03.271Z [FF9475B0 info 'Vimsvc.ha-eventmgr' opID=5755438a-77-db-65-43 user=vpxuser] Event 214 : Assign a new instance UUID (50197f97-da7f-d145-d8bf-8b41df5732f0) to 87457-n1kv01.den03-1
2014-01-31T23:02:03.272Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Setting VM's tracking state to disabled.
2014-01-31T23:02:03.272Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] UpdatePortOnVmReconfigure: _vmInstanceUuidAfter is set to inSpec [50197f97-da7f-d145-d8bf-8b41df5732f0]
2014-01-31T23:02:03.366Z [FF9475B0 info 'vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Reloading config state.
2014-01-31T23:02:03.387Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VMHS: Transitioned vmx/execState/val to poweredOff
2014-01-31T23:02:03.405Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Commit Vigor batch operation successful
2014-01-31T23:02:03.405Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Signalling Commit Vigor batch operation
2014-01-31T23:02:03.405Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Waiting on Commit Vigor batch operation
2014-01-31T23:02:03.405Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Completed Commit Vigor batch operation
2014-01-31T23:02:03.405Z [50FC2B70 verbose 'Hostsvc.DatastoreSystem'] Datastore-Vdisk refresh: scheduling thread after:0 usec
2014-01-31T23:02:03.405Z [4F8E2B70 verbose 'Hostsvc.FSVolumeProvider'] RefreshOneVmfsVolume on /vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994
2014-01-31T23:02:03.413Z [50281B70 info 'vm:Vix: [34498 foundryVMPowerOps.c:980]: FoundryVMPowerStateChangeCallback: /vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx'] vmx/execState/val = poweredOff.
2014-01-31T23:02:03.415Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Time to gather Snapshot information ( read from disk, build tree): 1 msecs. needConsolidate is false.
2014-01-31T23:02:03.415Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Time to gather snapshot file layout: 0 (msecs)
2014-01-31T23:02:03.415Z [FF9475B0 warning 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] CannotRetrieveCorefiles: VM is in an invalid state
2014-01-31T23:02:03.460Z [4F8E2B70 verbose 'Hostsvc.FSVolumeProvider'] RefreshOneVmfsVolume 5101904b-227e85e8-3e4a-78e7d17c7994 calling ProcessVmfs
2014-01-31T23:02:03.461Z [4F8E2B70 info 'Hostsvc.DatastoreSystem'] RefreshVdiskDatastores: Done refreshing datastores.
2014-01-31T23:02:03.467Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Time to gather config: 52 (msecs)
2014-01-31T23:02:03.468Z [50FC2B70 verbose 'Hbrsvc'] Replicator: ReconfigListener triggered for config VM 14
2014-01-31T23:02:03.470Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VAAI-NAS :: vmfsNasPlugin: SUCCESSES: RsrvSpace [0] Cln-Full [0] Cln-Lazy [0] cln-DRun [0], Ext-stats [97]
2014-01-31T23:02:03.470Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VAAI-NAS :: vmfsNasPlugin: FAILURES: RsrvSpace [0] Cln-Full [0] Cln-Lazy [0] cln-DRun [0], Ext-stats [0]
2014-01-31T23:02:03.470Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VAAI-NAS :: SvaNasPlugin: SUCCESSES: RsrvSpace [0] Cln-Full [0] Cln-Lazy [0] cln-DRun [0], Ext-stats [0]
2014-01-31T23:02:03.470Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VAAI-NAS :: SvaNasPlugin: FAILURES: RsrvSpace [0] Cln-Full [0] Cln-Lazy [0] cln-DRun [0], Ext-stats [0]
2014-01-31T23:02:03.470Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] VAAI-NAS :: NAS Mapping Used successfully for 120 times
2014-01-31T23:02:03.471Z [FF9475B0 info 'Hostsvc' opID=5755438a-77-db-65-43 user=vpxuser] Lookupvm: World ID not set for VM 14
2014-01-31T23:02:03.471Z [FF9475B0 verbose 'Hbrsvc' opID=5755438a-77-db-65-43 user=vpxuser] Replicator: VmFileProviderCallback VM (id=14)
2014-01-31T23:02:03.472Z [50FC2B70 verbose 'Hbrsvc'] Replicator: VmReconfig ignoring VM 14 not configured for replication
2014-01-31T23:02:03.472Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Fault Tolerance state callback received
2014-01-31T23:02:03.472Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Record/replay state callback received
2014-01-31T23:02:03.474Z [FF9475B0 info 'Libs' opID=5755438a-77-db-65-43 user=vpxuser] Failed to find manifest content in extended config xml.
2014-01-31T23:02:03.474Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Initial tools version: 7:guestToolsNotInstalled
2014-01-31T23:02:03.475Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] State Transition (VM_STATE_INITIALIZING -> VM_STATE_OFF)
2014-01-31T23:02:03.475Z [FF9475B0 verbose 'Hostsvc.HaHost' opID=5755438a-77-db-65-43 user=vpxuser] ModeMgr::End: op = normal, current = normal, count = 3
2014-01-31T23:02:03.475Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Predicted VM overhead: 141684736 bytes
2014-01-31T23:02:03.476Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Max connection count changed from 0 to 40
2014-01-31T23:02:03.476Z [FF9475B0 info 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Initialized virtual machine.
2014-01-31T23:02:03.476Z [FF9475B0 verbose 'Vmsvc.vm:/vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx' opID=5755438a-77-db-65-43 user=vpxuser] Create DONE: /vmfs/volumes/5101904b-227e85e8-3e4a-78e7d17c7994/87457-n1kv01.den03-1/87457-n1kv01.den03-1.vmx
Similar Messages
-
Installation of Nexus 1000v 4.2.1.SV2.1.1 - Operation timed out.
Hi,
We are trying to install the latest version of Nexus 1000v to ESXi5.1 and the installer application is much better than the previos one, but we are having problems with implemetation, because deploying of OVA file times out.
First attempt: Nexus-1 was successfully deployed on ESXi-1, but Nexus-2 which should be deployed on ESXi-2 returned an error: "Deploy OVF template":"Operation timed out."
Second attempt: Deploying of Nexus-1 returned the same error
Third attempt: The same as the first attempt.
It looks like that there is a time limit which is used for deploying OVA file and since file needs to be uploaded to ESXi it takes too long, so the installation fails. Is it possible to extend this time?
BR, M.Hi Mtrcek,
The fact that it gets to the 'Deploy OVF Template' step and then fails still points to one of two possible things:
1. DNS
2. Storage
1. DNS - When you say you put entries in hosts files it tells me you are looking at the DNS on the VC or ESX hosts. What you need to check is the DNS on the vShield Manager. DNS servers need to be configured on the vShield Manager, also a good way to test is to log in to the CLI of the vShield Manager and from there ping by hostname the VC and the ESX servers.
2. Storage - make sure there is enough space on the datastore where you are deploying the vShield Zones firewall and make sure there are no latency/slowness when writing to the disk. A quick test is to install the vShield Zones firewall on local disk, just to rule out the shared storage being the issue. Of course, this is not the recommended installation location and I would strongly suggest to uninstall and then re-install on shared storage once the issue is fixed (Assuming there are issues with shared storage).
ne more thing I noticed from the screenshot is that you have not applied the license keys for vShield App and vShield Edge. I mention this because you say your test plan requires Edge and most likely vShield App (not the free version: Zones). You will need to apply the license keys in order to be able to deploy Edge.
Please check DNS/Storage.
orrrrrrrrrrrrrr
vShield Data Security Installation Fails
Problem
During vShield Data Security installation, I get an error while installing the service virtual machine and an
error message on vSphere client.
NAME=deploy OVF template Target=VMWARE-Data Security-xxxx
Status=operation timed out
Cause
The DNS setup for vShield Manager may not be consistent with the DNS setup for the host in vCenter Server.
Solution
Change the vShield Manager DNS setup so that it matches the host setup.
Regards
please rate if it helps. -
I am having some problems with VSM/VEM connectivity after an upgrade that I'm hoping someone can help with.
I have a 2 ESXi host cluster that I am upgrading from vSphere 5.0 to 5.5u1, and upgrading a Nexus 1000V from SV2(2.1) to SV2(2.2). I upgraded vCenter without issue (I'm using the vCSA), but when I attempted to upgrade ESXi-1 to 5.5u1 using VUM it complained that a VIB was incompatible. After tracing this VIB to the 1000V VEM, I created an ESXi 5.5u1 installer package containing the SV2(2.2) VEM VIB for ESXi 5.5 and attempted to use VUM again but was still unsuccessful
I removed the VEM VIB from the vDS and the host and was able to upgrade the host to 5.5u1. I tried to add it back to the vDS and was given the error below:
vDS operation failed on host esxi1, Received SOAP response fault from [<cs p:00007fa5d778d290, TCP:esxi1.gooch.net:443>]: invokeHostTransactionCall
Received SOAP response fault from [<cs p:1f3cee20, TCP:localhost:8307>]: invokeHostTransactionCall
An error occurred during host configuration. got (vim.fault.PlatformConfigFault) exception
I installed the VEM VIB manually at the CLI with 'esxcli software vib install -d /tmp/cisco-vem-v164-4.2.1.2.2.2.0-3.2.1.zip' and I'm able to add to to the vDS, but when I connect the uplinks and migrate the L3 Control VMKernel, I get the following error where it complains about the SPROM when the module comes online, then it eventually drops the VEM.
2014 Mar 29 15:34:54 n1kv %VEM_MGR-2-VEM_MGR_DETECTED: Host esxi1 detected as module 3
2014 Mar 29 15:34:54 n1kv %VDC_MGR-2-VDC_CRITICAL: vdc_mgr has hit a critical error: SPROM data is invalid. Please reprogram your SPROM!
2014 Mar 29 15:34:54 n1kv %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2014 Mar 29 15:37:14 n1kv %VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: Removing VEM 3 (heartbeats lost)
2014 Mar 29 15:37:19 n1kv %STP-2-SET_PORT_STATE_FAIL: Port state change req to PIXM failed, status = 0x41e80001 [failure] vdc 1, tree id 0, num ports 1, ports state BLK, opcode MTS_OPC_PIXM_SET_MULT_CBL_VLAN_BM_FOR_MULT_PORTS, msg id (2274781), rr_token 0x22B5DD
2014 Mar 29 15:37:21 n1kv %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
I have tried gracefully removing ESXi-1 from the vDS and cluster, reformatting it with a fresh install of ESXi 5.5u1, but when I try to join it to the N1KV it throws the same error.Hi,
The SET_PORT_STATE_FAIL message is usually thrown when there is a communication issue between the VSM and the VEM while the port-channel interface is being programmed.
What is the uplink port profile configuration?
Other hosts are using this uplink port profile successfully?
The upstream configuration on an affected and a working host is the same? (ie control VLAN allowed where necessary)
Per kpate's post, control VLAN needs to be a system VLAN on the uplink port profile.
The VDC SPROM message is a cosmetic defect
https://tools.cisco.com/bugsearch/bug/CSCul65853/
HTH,
Joe -
Nexus 1000v VEM module bouncing between hosts
I'm receiving these error messages on my N1KV and don't know how to fix it. I've tried removing, rebooting, reinstalling host B's VEM but that did not fix the issue. How do I debug this?
My setup,
Two physical hosts running esxi 5.1, vcenter appliance, n1kv with two system uplinks and two uplinks for iscsi for each host. Let me know if you need more output from logs or commands, thanks.
N1KV# 2013 Jun 17 18:18:07 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 17 18:18:07 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 17 18:18:08 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_UNEXP_NODEID_REQ: Removing VEM 3 (Unexpected Node Id Request)
2013 Jun 17 18:18:09 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 17 18:18:13 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.51.100 detected as module 3
2013 Jun 17 18:18:13 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 17 18:18:16 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_UNEXP_NODEID_REQ: Removing VEM 3 (Unexpected Node Id Request)
2013 Jun 17 18:18:17 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 17 18:18:21 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 17 18:18:21 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 17 18:18:22 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_UNEXP_NODEID_REQ: Removing VEM 3 (Unexpected Node Id Request)
2013 Jun 17 18:18:23 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 17 18:18:28 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.51.100 detected as module 3
2013 Jun 17 18:18:29 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 17 18:18:44 N1KV %PLATFORM-2-MOD_DETECT: Module 2 detected (Serial number :unavailable) Module-Type Virtual Supervisor Module Model :unavailable
N1KV# sh module
Mod Ports Module-Type Model Status
1 0 Virtual Supervisor Module Nexus1000V ha-standby
2 0 Virtual Supervisor Module Nexus1000V active *
3 248 Virtual Ethernet Module NA ok
Mod Sw Hw
1 4.2(1)SV2(1.1a) 0.0
2 4.2(1)SV2(1.1a) 0.0
3 4.2(1)SV2(1.1a) VMware ESXi 5.1.0 Releasebuild-838463 (3.1)
Mod MAC-Address(es) Serial-Num
1 00-19-07-6c-5a-a8 to 00-19-07-6c-62-a8 NA
2 00-19-07-6c-5a-a8 to 00-19-07-6c-62-a8 NA
3 02-00-0c-00-03-00 to 02-00-0c-00-03-80 NA
Mod Server-IP Server-UUID Server-Name
1 192.168.54.2 NA NA
2 192.168.54.2 NA NA
3 192.168.51.100 03000200-0400-0500-0006-000700080009 NA
* this terminal session
~ # vemcmd show card
Card UUID type 2: 03000200-0400-0500-0006-000700080009
Card name:
Switch name: N1KV
Switch alias: DvsPortset-1
Switch uuid: e6 dc 36 50 c0 a9 d9 a5-0b 98 fb 90 e1 fc 99 af
Card domain: 2
Card slot: 3
VEM Tunnel Mode: L3 Mode
L3 Ctrl Index: 49
L3 Ctrl VLAN: 51
VEM Control (AIPC) MAC: 00:02:3d:10:02:02
VEM Packet (Inband) MAC: 00:02:3d:20:02:02
VEM Control Agent (DPA) MAC: 00:02:3d:40:02:02
VEM SPAN MAC: 00:02:3d:30:02:02
Primary VSM MAC : 00:50:56:b6:0c:b2
Primary VSM PKT MAC : 00:50:56:b6:35:3f
Primary VSM MGMT MAC : 00:50:56:b6:d5:12
Standby VSM CTRL MAC : 00:50:56:b6:96:f2
Management IPv4 address: 192.168.51.100
Management IPv6 address: 0000:0000:0000:0000:0000:0000:0000:0000
Primary L3 Control IPv4 address: 192.168.54.2
Secondary VSM MAC : 00:00:00:00:00:00
Secondary L3 Control IPv4 address: 0.0.0.0
Upgrade : Default
Max physical ports: 32
Max virtual ports: 216
Card control VLAN: 1
Card packet VLAN: 1
Control type multicast: No
Card Headless Mode : No
Processors: 4
Processor Cores: 4
Processor Sockets: 1
Kernel Memory: 16669760
Port link-up delay: 5s
Global UUFB: DISABLED
Heartbeat Set: True
PC LB Algo: source-mac
Datapath portset event in progress : no
Licensed: Yes
~ # vemcmd show card
Card UUID type 2: 03000200-0400-0500-0006-000700080009
Card name:
Switch name: N1KV
Switch alias: DvsPortset-0
Switch uuid: e6 dc 36 50 c0 a9 d9 a5-0b 98 fb 90 e1 fc 99 af
Card domain: 2
Card slot: 3
VEM Tunnel Mode: L3 Mode
L3 Ctrl Index: 49
L3 Ctrl VLAN: 52
VEM Control (AIPC) MAC: 00:02:3d:10:02:02
VEM Packet (Inband) MAC: 00:02:3d:20:02:02
VEM Control Agent (DPA) MAC: 00:02:3d:40:02:02
VEM SPAN MAC: 00:02:3d:30:02:02
Primary VSM MAC : 00:50:56:b6:0c:b2
Primary VSM PKT MAC : 00:50:56:b6:35:3f
Primary VSM MGMT MAC : 00:50:56:b6:d5:12
Standby VSM CTRL MAC : 00:50:56:b6:96:f2
Management IPv4 address: 192.168.52.100
Management IPv6 address: 0000:0000:0000:0000:0000:0000:0000:0000
Primary L3 Control IPv4 address: 192.168.54.2
Secondary VSM MAC : 00:00:00:00:00:00
Secondary L3 Control IPv4 address: 0.0.0.0
Upgrade : Default
Max physical ports: 32
Max virtual ports: 216
Card control VLAN: 1
Card packet VLAN: 1
Control type multicast: No
Card Headless Mode : Yes
Processors: 4
Processor Cores: 4
Processor Sockets: 1
Kernel Memory: 16669764
Port link-up delay: 5s
Global UUFB: DISABLED
Heartbeat Set: False
PC LB Algo: source-mac
Datapath portset event in progress : no
Licensed: Yes
! ports 1-6 connected to physical host A
interface GigabitEthernet1/0/1
description VMWARE ESXi Trunk
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
spanning-tree portfast trunk
spanning-tree bpdufilter enable
spanning-tree bpduguard enable
channel-group 1 mode active
! ports 7-12 connected to phys host B
interface GigabitEthernet1/0/7
description VMWARE ESXi Trunk
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
spanning-tree portfast trunk
spanning-tree bpdufilter enable
spanning-tree bpduguard enable
channel-group 2 mode activeok after deleteing the n1kv vms and vcenter and then reinstalling all I got the error again,
N1KV# 2013 Jun 18 17:48:12 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:48:13 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:48:16 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 18 17:48:16 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 18 17:48:22 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:48:23 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:48:34 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 18 17:48:34 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 18 17:48:41 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:48:42 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:49:03 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 18 17:49:03 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 18 17:49:10 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:49:11 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:49:29 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.51.100 detected as module 3
2013 Jun 18 17:49:29 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 18 17:49:35 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:49:36 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:49:53 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.51.100 detected as module 3
2013 Jun 18 17:49:53 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
2013 Jun 18 17:49:59 N1KV %VEM_MGR-2-VEM_MGR_REMOVE_STATE_CONFLICT: Removing VEM 3 due to state conflict VSM(NodeId Processed), VEM(ModIns End Rcvd)
2013 Jun 18 17:50:00 N1KV %VEM_MGR-2-MOD_OFFLINE: Module 3 is offline
2013 Jun 18 17:50:05 N1KV %VEM_MGR-2-VEM_MGR_DETECTED: Host 192.168.52.100 detected as module 3
2013 Jun 18 17:50:05 N1KV %VEM_MGR-2-MOD_ONLINE: Module 3 is online
Host A
~ # vemcmd show card
Card UUID type 2: 03000200-0400-0500-0006-000700080009
Card name:
Switch name: N1KV
Switch alias: DvsPortset-0
Switch uuid: e6 dc 36 50 c0 a9 d9 a5-0b 98 fb 90 e1 fc 99 af
Card domain: 2
Card slot: 1
VEM Tunnel Mode: L3 Mode
L3 Ctrl Index: 49
L3 Ctrl VLAN: 52
VEM Control (AIPC) MAC: 00:02:3d:10:02:00
VEM Packet (Inband) MAC: 00:02:3d:20:02:00
VEM Control Agent (DPA) MAC: 00:02:3d:40:02:00
VEM SPAN MAC: 00:02:3d:30:02:00
Primary VSM MAC : 00:50:56:b6:96:f2
Primary VSM PKT MAC : 00:50:56:b6:11:b6
Primary VSM MGMT MAC : 00:50:56:b6:48:c6
Standby VSM CTRL MAC : ff:ff:ff:ff:ff:ff
Management IPv4 address: 192.168.52.100
Management IPv6 address: 0000:0000:0000:0000:0000:0000:0000:0000
Primary L3 Control IPv4 address: 192.168.54.2
Secondary VSM MAC : 00:00:00:00:00:00
Secondary L3 Control IPv4 address: 0.0.0.0
Upgrade : Default
Max physical ports: 32
Max virtual ports: 216
Card control VLAN: 1
Card packet VLAN: 1
Control type multicast: No
Card Headless Mode : Yes
Processors: 4
Processor Cores: 4
Processor Sockets: 1
Kernel Memory: 16669764
Port link-up delay: 5s
Global UUFB: DISABLED
Heartbeat Set: False
PC LB Algo: source-mac
Datapath portset event in progress : no
Licensed: No
Host B
~ # vemcmd show card
Card UUID type 2: 03000200-0400-0500-0006-000700080009
Card name:
Switch name: N1KV
Switch alias: DvsPortset-0
Switch uuid: bf fb 28 50 1b 26 dd ae-05 bd 4e 48 2e 37 56 f3
Card domain: 2
Card slot: 3
VEM Tunnel Mode: L3 Mode
L3 Ctrl Index: 49
L3 Ctrl VLAN: 51
VEM Control (AIPC) MAC: 00:02:3d:10:02:02
VEM Packet (Inband) MAC: 00:02:3d:20:02:02
VEM Control Agent (DPA) MAC: 00:02:3d:40:02:02
VEM SPAN MAC: 00:02:3d:30:02:02
Primary VSM MAC : 00:50:56:a8:f5:f0
Primary VSM PKT MAC : 00:50:56:a8:3c:62
Primary VSM MGMT MAC : 00:50:56:a8:b4:a4
Standby VSM CTRL MAC : 00:50:56:a8:30:d5
Management IPv4 address: 192.168.51.100
Management IPv6 address: 0000:0000:0000:0000:0000:0000:0000:0000
Primary L3 Control IPv4 address: 192.168.54.2
Secondary VSM MAC : 00:00:00:00:00:00
Secondary L3 Control IPv4 address: 0.0.0.0
Upgrade : Default
Max physical ports: 32
Max virtual ports: 216
Card control VLAN: 1
Card packet VLAN: 1
Control type multicast: No
Card Headless Mode : No
Processors: 4
Processor Cores: 4
Processor Sockets: 1
Kernel Memory: 16669760
Port link-up delay: 5s
Global UUFB: DISABLED
Heartbeat Set: True
PC LB Algo: source-mac
Datapath portset event in progress : no
Licensed: Yes
I used the nexus 1000v java installer so I don't know what it keeps assigning the same UUID nor do I know how to change it.
Here is the other output you requested,
N1KV# show vms internal info dvs
DVS INFO:
DVS name: [N1KV]
UUID: [bf fb 28 50 1b 26 dd ae-05 bd 4e 48 2e 37 56 f3]
Description: [(null)]
Config version: [1]
Max ports: [8192]
DC name: [Galaxy]
OPQ data: size [1121], data: [data-version 1.0
switch-domain 2
switch-name N1KV
cp-version 4.2(1)SV2(1.1a)
control-vlan 1
system-primary-mac 00:50:56:a8:f5:f0
active-vsm packet mac 00:50:56:a8:3c:62
active-vsm mgmt mac 00:50:56:a8:b4:a4
standby-vsm ctrl mac 0050-56a8-30d5
inband-vlan 1
svs-mode L3
l3control-ipaddr 192.168.54.2
upgrade state 0 mac 0050-56a8-30d5 l3control-ipv4 null
cntl-type-mcast 0
profile dvportgroup-26 trunk 1,51-57,110
profile dvportgroup-26 mtu 9000
profile dvportgroup-27 access 51
profile dvportgroup-27 mtu 1500
profile dvportgroup-27 capability l3control
profile dvportgroup-28 access 52
profile dvportgroup-28 mtu 1500
profile dvportgroup-28 capability l3control
profile dvportgroup-29 access 53
profile dvportgroup-29 mtu 1500
profile dvportgroup-30 access 54
profile dvportgroup-30 mtu 1500
profile dvportgroup-31 access 55
profile dvportgroup-31 mtu 1500
profile dvportgroup-32 access 56
profile dvportgroup-32 mtu 1500
profile dvportgroup-34 trunk 220
profile dvportgroup-34 mtu 9000
profile dvportgroup-35 access 220
profile dvportgroup-35 mtu 1500
profile dvportgroup-35 capability iscsi-multipath
end-version 1.0
push_opq_data flag: [1]
show svs neighbors
Active Domain ID: 2
AIPC Interface MAC: 0050-56a8-f5f0
Inband Interface MAC: 0050-56a8-3c62
Src MAC Type Domain-id Node-id Last learnt (Sec. ago)
0050-56a8-30d5 VSM 2 0201 1020.45
0002-3d40-0202 VEM 2 0302 1.33
I cannot add Host A to the N1KV it errors out with,
vDS operation failed on host 192.168.52.100, An error occurred during host configuration. got (vim.fault.PlatformConfigFault) exception
Host B (192.168.51.100) was added fine, then I moved a vmkernel to the N1KV which brought up the VEM and got the VEM flapping errors. -
SCVMM Kicks out Nexus 1000V Uplink NIC Any ideas?
The SCVMM suddenly kicks out the Nexus 1000V Uplink NIC,
thus preventing me from remediating the change.
Also i get this error message
Using Hyper V as virtualization platformHello,
You can use one Ethernet port-profile with a channel-group command (like 'channel-group auto mode on mac-pinning') and assign it to all the vmnic interfaces that need to carry the same set of VLANs
The same port-profile can be used on other hosts too. The N1k would automatically bundle (port-channel) the interfaces that belong to the same ESX host (accomplished through the 'channel-group auto' command)
If you need the interfaces to carry separate sets of VLANs, then you need a different port-profile.
Port-profile is just a container for a common set of configuration that you can apply for multiple interfaces across multiple hosts.
Thanks,
Shankar -
Weird syslog format messages with Nexus 1000v
I'm trying out the Nexus 1000v, and have the VEM configured to write logs to my syslog server. The thing is, the messages are in a weird format that my log management tools cannot parse. Here is an example:
<189>: 2012 Oct 21 15:22:40 UTC: %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by admin on unknown_session
I found the documentation rather amusing, where it states "The syslog client functionality is RFC-5424 compliant" - doesn't look like they've even read the RFC! This is closer to the format of the older (but more often found in the wild, RFC3164... though not compliant with that either :/
Anyway, I guess the main issue here is that the hostname of the 1000v is not being added to the logs (it is set in my config). Any ideas how I can fix this?
Thanks!Hi,
Do you have vCenter install on Win2012 Server? The installation would not continue until you have vCenter installed.
Hardik -
DCNM - Nexus 1000v compatibility
Is DCNM v5.2(2a) compatible with Nexus 1000v v4.2(1)SV1(4a)?
We are getting an SNMP OID error when we try.
The compatibility matrix (http://www.cisco.com/en/US/partner/docs/switches/datacenter/sw/5_x/dcnm/matrix/matrix.html) is unclear.Hello Grant.
4.2(1) is the NX-OS version for N1k. The matrix indicates all SV1(4) versions are supported
SV14# sh version | inc system
system: version 4.2(1)SV1(4a)
Please let us know the exact SNMP OID error. You may want to debug snmp errors on the N1k side when attempting to add the N1k. -
Nexus 1000v 4.2.1 - Interface Ethernet3/5 has been quarantined due to Cmd Failure
Hello,
i get the error message "Interface Ethernet3/5 has been quarantined due to Cmd Failure" when i try to activate the System Uplink ports on the Nexus 1000v VSM. The symptom occurs under 4.2.1.SV1.4 (has been fresh setup, did before tests with 4.0.4). Unfortunately, the link to the 4.2.1 troubleshooting guide does not work (seems it hasn't been released yet).
Has anyone an idea what the root cause could be?
The VSM and VEM run on a GP DL3xxG7 with 2 x Dual Port 10Gbit CNA Adapters.
Nexus 1k config:
vlan 1
vlan 260
name Servers
vlan 340
name NfsA
vlan 357
name vMotion
vlan 920
name Packet_Control
port-profile type ethernet SYSTEM-UPLINK
vmware port-group
switchport mode trunk
switchport trunk allowed vlan 1,260,301,303,305,307,357,544,920
spanning-tree port type edge trunk
switchport trunk native vlan 1
channel-group auto mode active
no shutdown
system vlan 1,357,920
state enabled
port-profile type ethernet STORAGE-UPLINK
vmware port-group
switchport mode trunk
switchport trunk allowed vlan 340
channel-group auto mode active
no shutdown
system vlan 340
state enabled
When i do a no shut on the physical ports i get:
switch(config-if)# no shut
2011 Feb 24 11:43:55 switch %PORT-PROFILE-2-INTERFACE_QUARANTINED: Interface Ethernet3/7 has been quarantined due to Cmd Failure
2011 Feb 24 11:43:55 switch %PORT-PROFILE-2-INTERFACE_QUARANTINED: Interface Ethernet3/5 has been quarantined due to Cmd Failure
The other etherchannel (Port Profile STORAGE-UPLINK) does work pretty well...
The peer switches are two Nexus 5k with VPC.
config:
port-profile type port-channel VMWare-LAN
switchport mode trunk
switchport trunk allowed vlan 260, 301, 303, 305, 307, 357, 544, 920
spanning-tree port type edge trunk
switchport trunk native vlan 1
state enabled!
interface port-channel18
inherit port-profile VMWare-LAN
description CHA vshpvm001 LAN
vpc 18
speed 10000!
interface Ethernet1/18
description CHA vshpvm001 LAN
switchport mode trunk
switchport trunk allowed vlan 260,301,303,305,307,357,544,920
channel-group 18 mode active
switch# show port-profile sync-status
Ethernet3/5
port-profile: SYSTEM-UPLINK
interface status: quarantine
sync status: out of sync
cached commands:
errors:
cached command failed
recovery steps:
unshut interface
Ethernet3/7
port-profile: SYSTEM-UPLINK
interface status: quarantine
sync status: out of sync
cached commands:
errors:
cached command failed
recovery steps:
unshut interface
kind regards,
andySean,
thank you !
"show accounting log" helped me - i had the command spanning-tree port type edge trunk in the config which i somehow didn't realize that we hadn't this command in the 4.0.4 lab setup...so it was a copy/paste error (i copied the port-profile config from the N5k down to the N1k).
Fri Feb 25 07:20:32 2011:update:ppm.13880:admin:configure terminal ; interface Ethernet3/5 ; spanning-tree port type edge trunk (FAILURE)
Fri Feb 25 07:20:32 2011:update:ppm.13890:admin:configure terminal ; interface Ethernet3/5 ; shutdown (FAILURE)
As the N1k doesn't do STP at all (or does it? ) it's no wonder that the cli was complaining ...
Maybe this command should get more attention in the tshoot guide as it seems to be a very helpful one.
Cheers & Thanks,
Andy -
Nexus 1000v repo is not available
Hi everyone.
Cisco Yum repo for nexus 1000v is not available at the moment. I am wondering, is it Ok and Cisco finished it experiment with free Nexus1k or I need to contact someon (who?) to ask him to fix this problem.
PS Link to the repo: https://cnsg-yum-server.cisco.com/yumrepoLet's set the record straight here - to avoid confusion.
1. VEMs will continue to forward traffic in the event one or both VSM are unavailable - this requires the VEM to remain online and not reboot while both VSMs are offline. VSM communication is only required for config changes (and LACP negociation prior to 1.4)
2. If there is no VSM reachable, and a VEM is reboot, only then will the System VLANs go into a forwarding state. All other non-system VLANs will remain down. This is to faciliate the Chicken & Egg theory of a VEM being able to initially communicate with a VSM to obtain its programming.
The ONLY VLANs & vEth Profiles that should be set as system vlans are:
1000v-Control
1000v-Packet
Service Console/VMkernel for Mgmt
IP Storage (iSCSI or NFS)
Everything else should not be defined as a system VLAN including VMotion - which is a common Mistake.
**Remember that for a vEth port profile to behave like a system profile, it must be define on BOTH the vEth and Eth port profiles. Two factor check. This allows port profiles that maybe are not critical, yet share the same VLAN ID to behave differently.
There are a total of 16 profiles that can include system VLANs. If you exceed this, you can potentially run into issues with the Opaque data pushed from vCenter is truncated causing programming errors on your VEMs. Adhering to the limitations above should never lead to this situation.
Regards,
Robert -
Install and Configure Nexus 1000V
Hi all !! Hope everyone is well !!
I just purchase 2 Nexus 1000V's. Could someone give me some guidance on how to go about installing / configuring a Nexus 1000V switch ? This is my first time working with Nexus series switches. Thanks in advance !!!
D.Hi,
Here are some of the documents and video links that will help you to proceed futher with Nexus 1000v installation:
http://www.cciemachine.com/en/US/products/ps9902/prod_installation_guides_list.html
http://www.google.co.in/search?q=nexus+1000v+installation&hl=en&client=firefox-a&hs=Hnt&rls=org.mozilla:en-US:official&prmd=v&source=univ&tbs=vid:1&tbo=u&ei=WtloTI6hAc-rcbb98I8F&sa=X&oi=video_result_group&ct=title&resnum=4&ved=0CCwQqwQwAw -
Adobe creative cloud installation error 201
adobe creative cloud installation error 201
How to solve this problem?Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You -
I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!tools is at the top of the apple updater but dont get your hopes up
-
Software Update, 10.6.6 installation error!!
Hi all, hope someone can help.
I have a Mac Pro running 10.6.5. I upgraded to 10.6.5 recently and had problems with this. When using Software Update, it would download, log out and install only to get an error at the end saying it couldn't install, with no explanation of why. I did some investigation and it boiled down to Safari (one of the updates in the list to install along with 10.6.5) wasn't being replaced. I had to delete Safari from my applications folder before updating. I tried rebuilding permissions and even installed from the installers from the apple download page. but until I deleted Safari from my apps folder it would fail every time.
Since I assumed that it was a corrupt copy of safari and all other update went ok I assumed I had fixed the problem.
Now I'm trying to install the update of 10.6.6 via Software Update. and I'm getting the same problems. It downloads, reboots, installs then at the end says that it was not installed because of an error and promps me to restart.
I have downloaded the update and run it from the desktop and it goes through the install as follows:-
Installing
optimizing system
Moving files
installation failed.
It seems that it isn't able to replace existing files on my system with new ones therefore fails the install.
Has anyone got any ideas? I have repaired permissions with disk utility and tried repairing them while booting from the 10.6.3 system disc, still no joy
Many thanksWorse problem here. I get the installation error then the computer attempts to reboot and I get locked at the gray background apple screen. Tried safe boot power on +SHIFT a status bar comes up and goes 3/4 away across and locks. Running permissions repair from Mac OEM disk set was no help. Had to do a time machine restore. Seems my install error is catastrophic. On the upside time machine works very well.. A bit disappointed with my Windows-esque crash
-
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders -
ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)
I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2
Maybe you are looking for
-
recently I have install windows 7 in my old laptop since then the program Itunes have 2 libraries one at the top which I can put in new music and the other just below my I touch device botton. The problen is that now whenever I upload music is going
-
Link is no longer active error
I could only find non-answered posts to my problem so I'm posting it again. When I try to share a link of a folder with jpeg images, my recipient get the following message: "Sorry, this link is no longer active." When I sign out of my account, I some
-
I can't sync my iPhone and back up my data with my computer because iTunes says to enter the passcode into my iPhone to unlock it, but I am unable to unlock and enter in my passcode on my iPhone because the screen is shattered. I have my replacement
-
Hi, i recently got an n80 and since the 1st day i been trying to watch online videos. For example www.bbc.co.uk/news offers short clips specifically for mobiles, but when i try to play them i only see a little icon with a boat on it so i assume its n
-
Hi, Where forecast values in PPDS RRP3 transaction r stored? How do i fetch the forecast values? Is there any function module or table? Thanks Shan