Installation Error - ORA 12631

During the process of "Oracle Database Configuration Assistant" installation, the error "ORA-12631: Username retrieval failed" popped up. End up I can't find "Enterprise Manager".

Hi Lynn,
There is a special forum for installation errors that should give you an answer quickly: Database Installation

Similar Messages

MCOD Installation - Error ORA-1403 when accessing table SAPUSER

Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KT

Hi KT,
Actually the problem is not ORA-1403, but the <i>ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater</i>.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo

Oracle 9i Database installation error ORA-27102: out of memory HELP

Hello
Appologies if this post has been answered already, or if I am meant to post some data capture to show what is the issue however i am a bit unsure what I need.
I have downloaded oracle 9i for my university course as I need to have it to do some SQL and Forms building.
I have had a lot of issues but I have battled through them - however now I am stuck on this one.
I install Oracle and then the below:
Install Oracle Database 9.2.0.1.0
Personal Edition 2.80gb
General Purpose
I leave the defualt port
Set my database name
Select the location
Character set etc
then the database config assistant starts to install the new database at 46% i get the error on a pop up window :
ORA-27102: out of memory
How can I resolve this??
I am a mainframe programmer and not at all in anyway a windows whizz - please oculd someone help a dummy understand??
Again thank you all very much

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

PLEASE HELP! Installation error :ORA-12154 - TNS

Hi everyone,
When I'm installing 9ilite and when it comes to the mobile server repository screen, it get an error message :"ORA-12154 - TNS: could not resolve service name".
But my service name pass the test of TNSPING.
Please help me and any suggestion is greatly apprieciated.
Thank you very much!
Tonie

Check your tnsnames.ora and make sure that webtogo.world tns entry is correct. The entry should refer to the
correct database service name.

APEX 3.1 over XE installation error "ORA-01756" in installation script

Hello,
I get one single error in the apexinst script, at the coreinst level, in the "IV. I N S T A L L F L O W P A C K A G E B O D I E S" section:
...report layouts
...authentication schemes
......scheme 36917030094496871
......scheme 36917105493496871
......scheme 91645213681389498
begin
ERREUR à la ligne 1 :
ORA-01756: une chaîne entre apostrophes ne se termine pas correctement
ORA-06512: à ligne 2
I tried many times deinstalling and reinstalling, i keep getting this single error!
Any clues?
Thnks
Hichem

Hello Hichem,
Sounds to me that you didn't set NLS_LANG properly.
Have a look here: http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/post_inst.htm#sthref139
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Upgrade to 10.2.0.2: ORA-12631: Username retrieval failed

hello
I am upgrading oracle 9.2.0.7 to 10.2.0.2.
When I start the upgrade assistent, i receive the following error:
ORA-12631: Username retrieval failed
Before I started upgrade assistent, i could connect to SQL and everything was okay. Now I can connect to SQL but i can select nothing. Then i receive the same error: Username retrieval failed.
Thank you very much for helping.
Best regards
Selim

Refer notes
614036
620540
If these dont solve your problem write back

10g Installation and Error : ORA-12514 : Listerner cant recog. service requ

Hi,
I installed 10g, and trying to start sql plus. I entered
username: orcl
password: my own password
host string: name of my computer
I am getting the error: ORA-12514: TNS: Listener does not currently know of service orequested in connect descriptor.
I started the services and tried again but same problem.
I also tried system and sysman as username, w/o a password and included my computer name, but still facing the same problem.
Any thing else I should do besides uninstalling and reinstalling ?
Thanks

Where did the user name orcl come from? It certainly is not going to be there unless you logged in with a DBA account and created it: Did you?
So back to basics ... what version of Oracle did you install? 10g is a marketing label not a version number. It is likely something between 10.1.0.2 and 10.2.0.4.
Second how did you install the database? With the Oracle Universal Installer or with a script? Were there any error messages?
Have you checked the installation log?
Has it ever worked in the past and is now broken or has it never worked?
Is the listener running? How did you check?
When you say "I started the service" you are in what operating system and you started what service and how?
My guess, and it is only a wild guess given how little information you provided, is that there is an issue in your listener.ora and/or tnsnames.ora files: Post them along with the value you are entering as "Host" when you try to log in.
Again just a guess ... the user name should be SYSTEM, the password whatever you entered, and the Host "orcl."

Installation Error HTMLDB 1.6 -- ORA-06502

I get an installation error.
Oracle 10g 10.1.0.2 HTMLDB 1.6.
Does anyone have a tip whats going wrong.
...PAGE 103: Create Application from Scratch
Error creating page validation page=103 name=tab 1-5 name unique ORA-06502:
PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at
"FLOWS_010600.WWV_BIU_STEP_VALIDATIONS", line 20
ORA-04088: error during
execution of trigger 'FLOW
NLS_LANG=AMERICAN_AMERICA.US7ASCII
NLS settings are
SQL> show parameters NLS
NAME TYPE VALUE
nls_calendar string
nls_comp string
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string CHAR
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_timestamp_format string
nls_timestamp_tz_format string
nls_time_tz_format string
CHARACTER SET AL32UTF8
NATIONAL CHARACTER SET AL16UTF16
regards
Thorsten

Do you already have a tab 1-5 name unique row in your wwv_flow_step_validation table?
SQL> select * from flows_010600.wwv_flow_step_validations
where validation_name like '%unique%'
SQL>
ID FLOW_ID FLOW_STEP_ID
VALIDATION_NAME
VALIDATION_SEQUENCE
VALIDATION
VALIDATION2
VALIDATION_TYPE
VALIDATION_CONDITION
VALIDATION_CONDITION2
VALIDATION_CONDITION_TYPE
WHEN_BUTTON_PRESSED
ERROR_MESSAGE
ASSOCIATED_ITEM
ERROR_DISPLAY_LOCATION
REQUIRED_PATCH
SECURITY_SCHEME
SECURITY_GROUP_ID
LAST_UPDATED_BY
LAST_UPDA
VALIDATION_COMMENT
2.3810E+17 4000 103
tab 1-5 name unique
100
if (:F4000_T01 is not null) and (:F4000_P4012_DEFAULT_PAGES = '1') then
if :F4000_T01 = :F4000_T02 then
return false;
elsif :F4000_T01 = :F4000_T03 then
return false;
elsif :F4000_T01 = :F4000_T04 then
return false;
elsif :F4000_T01 = :F4000

Error in Installation 4.6b - error ORA-01918

Hello all!
I'm installing SAP R/3 4.6B in Windows 2000 and database Oracle 8.1.7.
I am following the installation guide 4.6C because the document indicates to me that I must follow this guide when is Windows 2000 and Oracle 8.1.6.
The progress of installation this in a 85%, but the process this stopping in the phase CRSAPDBAROLE_NT_ORA with the following messages of errors in the file sapdba_role.log:
old 13: if '&&2' != 'NT' then
new 13: if 'NT' != 'NT' then
old 14: V_User := 'OPS$' || '&&1' || 'ADM';
new 14: V_User := 'OPS$' || 'TVD' || 'ADM';
old 16: V_User := 'OPS$SAPSERVICE' || '&&1';
new 16: V_User := 'OPS$SAPSERVICE' || 'TVD';
old 22: if Db_Vers = '8.0' or '&&2' != 'NT' then
new 22: if Db_Vers = '8.0' or 'NT' != 'NT' then
old 79:   select password into v_pass from dba_users where username = '&Owner';
new 79:   select password into v_pass from dba_users where username = 'SAPR3';
old 93: Statement := 'alter user &Owner identified by sap';
new 93: Statement := 'alter user SAPR3 identified by sap';
PL/SQL procedure successfully completed.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Connected.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
grant ALL on DBATL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAOBJL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAPHAL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAGRP to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Connected.
old 15: Statement := 'alter user &Owner identified by values' || '''' || V_Pass || '''';
new 15: Statement := 'alter user SAPR3 identified by values' || '''' || V_Pass || '''';
PL/SQL procedure successfully completed.
old 14:   select password into v_pass from dba_users where username = '&Owner';
new 14:   select password into v_pass from dba_users where username = 'SAPTVD';
old 24: Statement := 'alter user &Owner identified by sap';
new 24: Statement := 'alter user SAPTVD identified by sap';
declare
ERROR at line 1:
ORA-01918: user 'SAPTVD' does not exist
ORA-06512: at "SYS.DBMS_SYS_SQL", line 824
ORA-06512: at "SYS.DBMS_SQL", line 32
ORA-06512: at line 25
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
Connected.
old 15: Statement := 'alter user &Owner identified by values' || '''' || V_Pass || '''';
new 15: Statement := 'alter user SAPTVD identified by values' || '''' || V_Pass || '''';
PL/SQL procedure successfully completed.
Somebody can help me in this case !!!
Desiree

Hi Desiree,
basically the other two commenters were right, the user
SAPTVD does not exist on the DB. Actually that's correct, since you're installing a 4.6B system, where the SAP Schemauser ALWAYS is names SAPR3 and never SAP<SID>.
So the question is, why is it tried to use the SAP<SID> user here?
I guess you're using a wrong version of the sapdba_role script or something.
Anyhow, to get around such issues, there's a note:
#<a href="https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000134592&nlang=E">134592</a> - Importing the SAPDBA role ( sapdba_role.sql).
Use it and the issue will be solved.
KR Lars

Oracle Database 11g Installation Issue: ORA-12560:TNS: protocol adapter error.

Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.

Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                14-AUG-2013 19:33:07
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
         (ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:19 refused:0 state:ready
         LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks.

Error ORA-12560 prompts when trying to log in to the Enterprise Manager

Hi all,
I am a newbie to Oracle.
Just installed the Oracle 9i Database Enterprise Edition (9.0.1) into Windows Server 2003 Standard Edition. Problem is encountered when trying to log in to the Enterprise Manager Standalone mode using either system/oracle or scott/tiger as credentials. Error "ORA-12560: TNS:protocol adapter error" prompts.
I tried to check with some configuration and see whether the services are started. Services of "OracleOraHome90TNSListener" and "OracleServiceORCL" have been started and the database exists in the dedicated directory. Environment variables of "ORACLE_HOME" and "ORACLE_SID" have been added manually as the SID is set to orcl, which I just follow what the instruction manual has stated. Moreover, I can't get access using command prompt typing "svrmgrl"; error returned stating " 'svrmgrl' is not recognized as an internal or external command, operable program or batch file."
Another information is that there is no domain set in my server. Just a server with a name being assigned in a workgroup.
Hence, would you mind please advice me what to do in order to get access into the Enterprise Manager? It's quite an urgent task.
A million thx in advance!
Best Regards,
Karen

Hi Jigneshrp,
Thanks for your reply.
It is checked that the listener is running and TNS name service exists. Following your advice, I did create a new listener and another name service and use them, but the same error turns out when trying to log in to the Enterprise Manager again.
Additional information to take note for is that while reconfiguring the existing listener or creating a new listener, a mesage prompts stating "The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as it is, but it will not be possible to start this listener until the conflict is resolved. Would you like to continue with the continue with the configuration anyway? Yes/No".
As for the reconfiguration or the new creation of TNS names service, when I am trying to test for the connection, the results in the details pane states that "Connecting... ORA-12560: TNS:protocol adapter error. The test did not succeed...."
Would you mind pls advice me on these?
Furthermore, there exist 2 questions I am wondering is that it is stated in the instruction manual that prior to the installation, a static IP should be specified for it instead of the DHCP one; hence, I wanna ask after the complete insallation, is it that the server should be running in the network, i.e. allow it to get connected with the outside network?
2nd question is that can Oracle 9i Database Server Standard Edition (9.0.1) be installed under a Windows Server 2003 Standard Edition and just a Window XP Professional?
Thanks for your reply.
Best Regards,
Karen

Report error:ORA-06502: PL/SQL: numeric or value error: character to number

The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PM

I think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points.

Report error: ORA-06502: PL/SQL: numeric or value error: NULL index table k

Hi everybody,
I have two Distinct Databases on two distinct servers. (Oracle Ent. Release 10.2.0.3.0 on AIX 5.3). After I install the latest patch last week, One of the APEX installation has some problems on Home>Application Builder Page. The error message is very random and
report error:
ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
When i change the view (details to icons), everything goes to normal. This error message is reflected some of the pages (report region) of some of my applications randomly. When it appears in a report region, i deselect the order method of the region, the result is normal.
But the other APEX application on the other instance has no problem. It is a bug? or Should i re-install the APEX instance?
Thank you for your interest?
Gökhan ÇATALKAYA

No, but we have a reproducible test case now so we're working on it. See ORA-06502: PL/SQL: numeric or value error: NULL index table key value
Scott

How to resolve the error ORA-12560 TNSprotocol adapter

I am using Oracle 9i release 2 database on my window xp machine. My database created using DBCA during installation is working fine . Now i want to create the database manually, When i set SET ORACLE_SID=newdb and try to connect to like this
c:\sqlplus /nolog
enter username:sys/sys as sysdba
gives an error ORA-12560 TNSprotocol adapter
how to resolve this error

see this:
ERROR:ORA-12560: TNS:protocol adapter error
see post of user601010

How to view the file content from the directory? getting Error:ORA-21560

SQL> create directory READ_LOB_DIR as 'D:\Prj\Comm\Data';
CREATE OR REPLACE Procedure READ_FILE_LOB IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(500);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_seb, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
l_sum := l_end - l_pos - 1;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
The Text file content is...
Copyright 1996,2001 Oracle Corporation.     All Rights Reserved
This file contains installation instructions for installing the
Oracle8 ODBC Driver software.
It is divided into four parts:
o Part I: Summary of systems supported by Oracle8 ODBC client
software
Lists the platforms on which the Oracle8 ODBC Client software can
be installed.
o Part II: Oracle8 ODBC Driver software.
Describes the files, and installation prerequisites for the Oracle8
ODBC driver software.
o Part III: Exploding the kit onto your system
Describes how to explode the kit onto your system hard drive.
o Part IV: Installation Instructions
Describes how to install the Oracle8 ODBC driver.
Part I: Systems supported by the Oracle8 client software
You can install the ODBC client software on any of the following systems:
o Windows 2000
o Windows NT X86
o Windows 95
o Windows 98
The Oracle8 ODBC Driver provides support for ODBC connections
from Windows 2000, Windows NT, Windows 95, and Windows 98 systems
to Oracle databases.
o Part II: Oracle8 ODBC Driver software.
Refer to the following files for information about the Oracle8 ODBC Driver:
LICENSE.TXT - Oracle8 ODBC Driver License Agreement. Read carefully
before installing and/or using this product. Enclosed in
your software distribution kit.
SQORA.HLP - A Window's Help file which is the primary reference
          manual for the Oracle8 ODBC Driver.
ODBCRelnotes.WRI - The release notes for the Oracle8 ODBC Driver
which contains information which may have not been
included in the Help file.
Installation Prerequisites
See the Oracle8 ODBC Driver release notes (ODBCRelnotes.WRI),
for a complete list of software products required and their versions.
Time Required
The installation of the Oracle8 ODBC Driver takes approximately 5
minutes. The actual time may be shorter or longer, depending upon
your hardware configuration.
Disk Space Required
The Oracle8 ODBC driver installation requires approximately 2
megabytes of available storage space. The space required depends upon
what files you already have installed. The installation procedure
checks to see if you have enough available disk space. If you do not,
the installation fails.
Part III: Exploding the Kit onto your system
Expand the self-extracting archive file onto your hard drive.
C:\> ORA8174.EXE
Part IV: Installation Instructions
Oracle8 ODBC Driver 8.1.7.4.0
This section assumes the following:
1. MS Windows 2000, Windows NT, Windows 95 or Windows 98 is running.
2. Oracle Universal Installer shipping with 8.1.7 has already been
installed on your system.
3. Part III has been completed.
Software fixes:
Refer to release notes (ODBCRelnotes.wri) for a complete list of
Software fixes.
Installation Instructions
Once the self-extracting archive file ORA8174.EXE has been
exploded it will create an installable directory structure
onto your hard drive. Run the Oracle Universal Installer from
your local drive.
1. On the screen "File Locations" use the "Browse" button of
the source path to choose the file 'products.jar' from the
folder that ORA8174.EXE was extracted to. Choose 'Next'.
2. You will receive a warning that some of the dependencies of
this product are not found in the staging area. This warning
is OK. The ODBC driver depends on the Net8 Client being already
installed on the system. Answer 'Yes' to continue.
Oracle is a registered trademark of Oracle Corporation.
Microsoft, MS are registered trademarks of Microsoft Corporation.
Microsoft Windows, Windows NT, Windows 95, Windows 98 and Open Database
Connectivity are trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property
of their respective owners.
The output was...
File testfile.txt in Directory READ_LOB_DIR exists
Copyright
1996,2001
Oracle
Corporation.
All
Rights
Reserved
This
file
contains
installation
instructions
for
installing
the
Oracle8
ODBC
Driver
software.
It
is
divided
into
four
parts:
o
Part
I:
Summary
of
systems
supported
by
Oracle8
ODBC
client
Error:ORA-21560: argument 2 is null, invalid, or out of range
I want to diplay/view as per file content format from the file under that specified directory.
Have any other method / any help or suggestions would be really appreciated.

I changed the code like...
CREATE OR REPLACE Procedure READ_FILE_LOB_tmp IS
-- Input Directory as specified in create directory
l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
-- Input File which is read word by word
l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
-- Separator Character between words is a BLANK (ascii = 32)
l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
-- Character at the end of the file is NEWLINE (ascii = 10)
l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
-- Pointer to the BFILE
l_loc BFILE;
-- Current position in the file (file begins at position 1)
l_pos NUMBER := 1;
-- Amount of characters have been read
l_sum BINARY_INTEGER := 0;
-- Read Buffer
l_buf VARCHAR2(4000);
-- End of the current word which will be read
l_end NUMBER;
-- Return value
l_ret BOOLEAN := FALSE;
BEGIN
-- Mapping the physical file with the pointer to the BFILE
l_loc := BFILENAME(l_dir, l_fil);
-- Check if the file exists
l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
IF (l_ret) THEN
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' exists');
-- Open the file in READ_ONLY mode
DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
LOOP
-- Calculate the end of the current word
l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
-- Process end-of-file
IF (l_end = 0) THEN
EXIT;
END IF;
-- Read until end-of-file
l_sum := l_end - l_pos;
DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
l_pos := l_pos + l_sum + 1;
END LOOP;
DBMS_LOB.CLOSE(l_loc);
ELSE
dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
' does not exist');
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Error:' || SQLERRM);
DBMS_LOB.CLOSE(l_loc);
END;
Now its working fine with one addtional line...
The file content is...
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
But The output was...
File testfile.txt in Directory READ_LOB_DIR exists
This is My Content
This is My Content
This is My Content
This is My Content
This is My Content
here, i want to delete that additonal line...?

Installation Error - ORA 12631

Similar Messages

Maybe you are looking for