Error in Installation 4.6b - error ORA-01918
Hello all!
I'm installing SAP R/3 4.6B in Windows 2000 and database Oracle 8.1.7.
I am following the installation guide 4.6C because the document indicates to me that I must follow this guide when is Windows 2000 and Oracle 8.1.6.
The progress of installation this in a 85%, but the process this stopping in the phase CRSAPDBAROLE_NT_ORA with the following messages of errors in the file sapdba_role.log:
old 13: if '&&2' != 'NT' then
new 13: if 'NT' != 'NT' then
old 14: V_User := 'OPS$' || '&&1' || 'ADM';
new 14: V_User := 'OPS$' || 'TVD' || 'ADM';
old 16: V_User := 'OPS$SAPSERVICE' || '&&1';
new 16: V_User := 'OPS$SAPSERVICE' || 'TVD';
old 22: if Db_Vers = '8.0' or '&&2' != 'NT' then
new 22: if Db_Vers = '8.0' or 'NT' != 'NT' then
old 79: select password into v_pass from dba_users where username = '&Owner';
new 79: select password into v_pass from dba_users where username = 'SAPR3';
old 93: Statement := 'alter user &Owner identified by sap';
new 93: Statement := 'alter user SAPR3 identified by sap';
PL/SQL procedure successfully completed.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Connected.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
grant ALL on DBATL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAOBJL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAPHAL to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
grant ALL on DBAGRP to sapdba
ERROR at line 1:
ORA-00942: table or view does not exist
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Connected.
old 15: Statement := 'alter user &Owner identified by values' || '''' || V_Pass || '''';
new 15: Statement := 'alter user SAPR3 identified by values' || '''' || V_Pass || '''';
PL/SQL procedure successfully completed.
old 14: select password into v_pass from dba_users where username = '&Owner';
new 14: select password into v_pass from dba_users where username = 'SAPTVD';
old 24: Statement := 'alter user &Owner identified by sap';
new 24: Statement := 'alter user SAPTVD identified by sap';
declare
ERROR at line 1:
ORA-01918: user 'SAPTVD' does not exist
ORA-06512: at "SYS.DBMS_SYS_SQL", line 824
ORA-06512: at "SYS.DBMS_SQL", line 32
ORA-06512: at line 25
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
Connected.
old 15: Statement := 'alter user &Owner identified by values' || '''' || V_Pass || '''';
new 15: Statement := 'alter user SAPTVD identified by values' || '''' || V_Pass || '''';
PL/SQL procedure successfully completed.
Somebody can help me in this case !!!
Desiree
Hi Desiree,
basically the other two commenters were right, the user
SAPTVD does not exist on the DB. Actually that's correct, since you're installing a 4.6B system, where the SAP Schemauser ALWAYS is names SAPR3 and never SAP<SID>.
So the question is, why is it tried to use the SAP<SID> user here?
I guess you're using a wrong version of the sapdba_role script or something.
Anyhow, to get around such issues, there's a note:
#<a href="https://websmp208.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000134592&nlang=E">134592</a> - Importing the SAPDBA role ( sapdba_role.sql).
Use it and the issue will be solved.
KR Lars
Similar Messages
-
During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.
Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
Mylenium -
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
-
Hi all,
I understand that there are already many forums out there on this topic.
I have also visited several youtube and forums, tried to follow instructions and all the suggested methods but at end of the day, it doesn't work for me.
In short, I am just trying to upgrade my Windows Powershell to 3.0 in Win7 Home Premium.
Before I can do that, it was mentioned to install Windows Management Framework 3.0 and I had the error as per below
"Installer encountered an error: 0x8007000d"
Tried several methods (eg, install MicrosoftFix, do several windows update, disable FW etc but none seem to work and I continue to receive this error.)
I wonder if there is any other method to install Windows Power 3.0 in my Win7 PC or I must install this Windows Mgmt Framework 3.0?
My main objective is only to get Windows Powershell 3.0 - that's all.
Thanks in advance for supportHi Jasonandmary ,
To install the Windows Powershell 3.0,the windows Service Pack 1 should be installed in the machine and the .net 4.0 or 4.5 should also be installed .Please ensure the system has met the prerequisites.
Here is a link for reference of installing Windows Powershell 3.0
Installing Windows PowerShell
https://technet.microsoft.com/en-us/library/hh847837.aspx?f=255&MSPPError=-2147217396
Windows Management Framework 3.0
http://www.microsoft.com/en-hk/download/details.aspx?id=34595
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Just purchased a MacBook Pro but had to reinstall OS X but now when I try to install anything I get the following message - The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message. -
Itunes 10 errors during installation with ipodservice error message
I have been trying to get itunes 10 installed for weeks. The upgrade would not work normally, so I removed itunes/quicktime/safari and decided try installing fresh.
I still get a error during the installation process saying that ipodservice.exe cannot execute instruction at 0x7c91b21a referenced at 0x0000000010. memory could not be 'written'
does anyone know how to fix this?i'm getting a similar message. running Windows XP with Symantec AV
-
Multiple Errors After Installation
I have the following errors and several programs were not installed. Please advise.
Thank you,
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DW064 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s), 3 warning(s)
WARNING: DW064: Memory requirements not met for {3D46121C-A0E6-4259-B7E0-5127C218A096} Adobe SpeedGrade CS6 6.0.0.0
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Dr. Aguilar\Downloads\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at C:\Users\Dr. Aguilar\Downloads\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Player for Embedding 3.201: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Suite Shared Configuration CS5.5: Install failed
ERROR: DW050: - Adobe Flash Builder 4.6: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Microsoft_VC90_MFCLOC_x86: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failedRead the system requirements for the programs. Half your errors are probably because your system doesn't meet the specs. That aside, simply start over:
Creative Suite Cleaner Tool
Errors "Exit Code: 6," "Exit Code: 7"
Error 1935
Error 1603
Mylenium -
1603 fatal error during installation-L7680 all in one printer
I continue to get this error because the installation finds newer software and quits. I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful. I then used CCleaner to clean all registry errors, and that still didn't work.
Is there a quick fix to get past this error and install the latest scanner software on the HP site? I can print with this printer, but can not see it on the network nor use the scanner.
Best regards,
EdHello @charleydog
Welcome to the forums
I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
I hope this helps you!
Have a terrific weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
1603 - Fatal error during installation
Hi all,
3 days ago I got Adobe Creative Cloud with access to all Apps in the Creative Suite. After downloading the Adobe Application Manager I commenced downloads/installs of each of the apps. Nearly half of them have come back saying that "Installation completed although some optional components failed to install correctly.
After hitting the hyperlink of "more details" I get this:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Microsoft_VC90_CRT_x86 1.0.0.0 {08D2E121-7F6A-43EB-97FD-629B44903403} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x8007054F.
ERROR: Third party payload installer Microsoft_VC90_CRT_x86.msi failed with exit code: 1603
Two questions. What do I do from here to ensure that all problem installations are rectified? And is this error code a minor or major issue?
Thank you,
dropbear1990Errors "Exit Code: 6," "Exit Code: 7"
Mylenium -
CS6 Warnings and errors at installation
With Windows Vista HP (32bit) I am getting the following error summary, and would like to know what's to be done next. CS3 Design Suite Premium is still installed.
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {98CB24AD-52FB-DB5F-A01F-
C8B3B9A1E18E}. HRESULT: 0x80070091.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {98CB24AD-52FB-DB5F-
A01F-C8B3B9A1E18E}. HRESULT: 0x80070091.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failedTwo points.
1. Vista is an unsupported operating system for CS6
2. It looks like the only issue here is the 64 bit applications not installing which would make sense since you’re using a 32 bit operating system.
Bob -
Acrobat XI installation failure, with error codes
I've tried but failed to install Acrobat XI twice from Creative Cloud, but the program showed up as installed in Win8 control panel. I uninstalled and tried again, failed, but captured the error codes as follows (hope someone can help):
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603Okay, so I've looked at posts with similar issues and error codes and they all seem to point in somewhat different directions and tend to relate to earlier product and OS versions but then I decided to look for the installation files in C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and found the Acrobat.exe file. It successfully launched the application, which appears to have installed properly (still testing that theory). The launch icons appear on the Win8 Start menu and the Control Panel\Programs\Programs and Features indicates the program has been installed. Apparently, the only issue remaining is that the CC App Manager shows the install as failed. Something failed, not sure what but it may have been the final hand-off of the process to CC App Manager. But I'm just guessing.
-
ORA32004, ORA error during installation
Hi,
During SAP installation I got below error
SAP 2004S
Oracle 10.2
Oracle installation was done successfully(SID-ANK) during SAP installation I am getting this error....
ERROR 2009-07-09 08:32:28
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-32004: obsolete and/or deprecated parameter(s) specifiedORACLE instance started.
ERROR 2009-07-09 08:32:28
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-09 08:32:28
FCO-00011 The step createDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost|ind|ind|ind|ind|3|0|NW_Cr
eateDB|ind|ind|ind|ind|10|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|in
d|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|c
reateDatabase was executed with status ERROR .
also during starting oracle...via SQL I am getting error
SQL> startup
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
I am not sure if both issues are related to each other.
Just for info..
OracleServiceANK is in start mode
OracleANK102Listener is also in start mode.
Also attaching listener.ora sqlnet.ora and tnsnames.ora
listener.ora
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#3 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = ANK.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = ANK)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = INLD50057853A)
(PORT = 1521)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SDU = 32768)
(SID_NAME = ANK)
(ORACLE_HOME = C:\oracle\ANK\102)
tnsnames.ora
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#3 $
ANK.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = INLD50057853A)
(PORT = 1521)
(CONNECT_DATA =
(SID = ANK)
(GLOBAL_NAME = ANK.WORLD)
sqlnet.ora
Filename......: sqlnet.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#3 $
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TCP.NODELAY=YES
Please do let me know if you need more inputs.
Regards,
Ankit BaphnaHi,
Thanks,
I got this...now
SQL> alter system set enqueue_resources='';
alter system set enqueue_resources=''
ERROR at line 1:
ORA-25138: ENQUEUE_RESOURCES initialization parameter has been made obsolete
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL> startup
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 356515840 bytes
Fixed Size 1248984 bytes
Variable Size 188743976 bytes
Database Buffers 163577856 bytes
Redo Buffers 2945024 bytes
ORA-00205: error in identifying control file, check alert log for more info
Regards,
Ankit Baphna
Edited by: I041468 on Jul 9, 2009 10:56 AM -
Hi, i am new to oracle, SQL DEVELOPER:- ERROR:- ORA-01918
Hi,
I am new to oracle, and i have installed Oracle database 12c enterprise edition, and oracle jdeveloper 12c for adf web application development,
I created a database and a new connection in it using sql developer, however while trying to create new user with the name db1 by right clicking on other users. by following the instructions in oracle documentation site. i get the error that new user db1 doesnt exist, and gives error:- ORA-01981. i even tried by changing the username as i thought may be it doesnt support alphanumeric name, but still i get the same error.
So please tell me how to create a new user. is there any way to get out of this ora:-01918, as i googled and it says this is a bug.
My os is win 7 x64(amd processor ).
Thank you
BaldwinA new user (called a schema in Oracle) is created using the CREATE USER SQL command. You need to be signed in as the SYS schema/user or as a schema that has been granted the rights to create schemas.
12c database comes in two basic flavours. Container database (containing pluggable databases). Standard database. If connected to a container database, you cannot create standard user schemas - you need to be connected to a pluggable database.
Also, your question has no relevance to either the SQL or PL/SQL languages - the subject matter of this forum. Please repost your question to a more appropriate forum dealing with SQL-Developer issues. -
IMPDP Errors ORA-39083 ORA-01918
Oracle Database 10.2
OS IBM AIX
Hi
I have to do one datapump import into one database. The source database is different.
The dumpfile contains 3 different schemas. And I need to import into one schema with a different name.
For example, Export dump contains AB, CD and EF.
I need to import only EF user into new database and it should become MN.
I have used remap_schema=EF:MN
The following is the import parfile.
userid='/ as sysdba'
directory=DF_DUMP
dumpfile=AMRC%U.dmp
remap_schema=EF:MN
remap_tablespace=RM100:TS100
remap_tablespace=DATA100:DATA300
job_name=MNIMPORT
logfile=MNIMPORT.log
parallel=4
I have started the import. But I see the below errors
ORA-39083: Object type TABLE failed to create with error:
ORA-01918: user 'AB' does not exist
Failing sql is:
CREATE TABLE
After this, import of MN has begun.
How to resolve the below error ? What is the reason for this error ? What changes are needed in parfile ?Three errors
- You didn't look up the error messages in the online documentation.
- impdp by default imports the entire file (Full=y). You need the SCHEMAS= clause
- expdp and impdp shouldn't be run as SYS
All in all you could have found the answer very easily in the online documentation.
Please avoid asking redundant questions in the future.
Sybrand Bakker
Senior Oracle DBA -
Hi,
I have a table: Role.This role table has rolenumber, rolename and rolerank.
Rolenumber Rolename Rolerank
1 Admin 1
2 Datamanager 2
3 Consultant 3
4 Fulltime 4
I have another table: user.
This table has main field userid followed by other user information.
I have another table: userrole.
This table has fields: userid, createdby,createddate,rolenumber
The requirement is :
Admin : delete and convert existing users to Datamanager.
Consultant : delete and convert existing users to Data Entry.
Full Time : delete and convert existing users to Full Access.
As the Data Entry and Full Access roles are not available in the role table, i created two new role names through insert statements.Now the role table looks as follows:
Rolenumber Rolename Rolerank
1 Admin 1
2 Datamanager 2
3 Consultant 3
4 Fulltime 4
5 Data Entry 5
6 Full Access 6
Then with the update statements, I updated all existing consultant users to Data Entry and all existing Full Time users to Full Access.
If I want to create a new userid, I need to login as datamanager and create a new userid.So I created a new userid for example as Naina with the role as Data Entry.
Now the userrole table looks as follows:
userid createdby createddate rolenumber
Naina datamanager 11/07/07 5
This userid appears in the "List of existing users" screen in the datamanager account.We have two modes: add mode and edit mode.
while creating this userid in the "Create User Screen" during add mode, we have one field Password.I entered " aaaaaa" in that field. In the edit mode of that userid, we have one field change password. This change passowrd allows the user to create a new password for that userid. When I changed the password for Naina and click save button at the bottom of the screen during edit mode, it displayed
the error message : ORA-01918: user 'NAINA' does not exist.
I executed select statement on both tables:user and userrole. i could get the output of those two select statements because this userid information is being stored in the database.
Could any one tell how I can resolve this error: "ORA-01918".
Thanks,
PrathimaNo one can possibly help you nor do I think they should.
First you are a student as is obvious from the exercise.
Second you seem to be using a front-end tool of which we have no knowledge.
Third you posted no DDL or DML
Fourth you posted no version
We have absolutely no idea what does or does not happen when you push some button.
I would suggest you discuss this with your teacher.
Maybe you are looking for
-
HP Photosmart 5514 all-in-one printer. Control copy function from computer?
I have a HP Photosmart 5514 whose touch screen is no longer working properly. It doesn't recognize any selection at the bottom right of the screen. I can touch any other place on the screen and it will respond. Because of this I'm no longer able t
-
What is the proper way to code a "wrapper" class?
Basically I want to replace an existing Action with a custom Action, but I want the custom Action to be able to invoke the existing Action. The following code works fine. I can create a custom Action using the existing action and the text on the butt
-
RE: Issue with ITunes, Audio, CPU
Hi there, I recently upgraded my Imac 27 i5 to OS X Mountain Lion. As I have powerfull machine Imac 27 i5 3 GHZ. I am wondering WHY it is slow, and when I am doing 2 things at the same time (e.g. surfing and watching movie), my Imac become hot and la
-
Why is performance so slow reading binary data from a SQL Azure DB with EF6.x
I'm running a WPF client that hits a SQL Azure DB using EF 6.x. For the most part, everything seems to be working fine. The one exception is when I try to read a large binary column. I am storing files in the DB as a binary column. When I test using
-
Being able to see hebrew language on ipod
Hi I live in NY and i am jewish i i recently put in my ITUNE Library some jewish Music with Hebrew Titles on the Library i am able to see the Hebrew fonts because my Windows supports Hebrew but once i sync it to my IPOD i don't see the hebrew fonts a