Installation of Full ABAP
Hello,
made the installation of Full ABAP Edition Trial, after logging into the system was a dump START_CALL_SICK, SICK and ran the transaction had the following information: OS release Windows NT 1.6 7601 Service Pack 1 4x Intel 80686 (Mod 37 Step 2) is not supported with this kernel (701).
Can someone help me?
Thanks
Hi,
Once you made sure you use the correct SAP installation guide
relevant for your SAP and OS/DB release,
when installing your SAP product on the new Windows Server R2 release,
there is specific kernel procedure for this OS release which you should
follow,
please see following Notes :
1486772 - SAP Systems on Windows Server 2008 R2
General Information
For all SAP systems - except SAP NetWeaver CE - do not use the original
kernel DVD, but create and use a modified kernel DVD as described in
SAP Note 1480785.
Regards,
Aidan
Similar Messages
-
Full ABAP Edition-Trial: no installation of maxdb???
Hello to all,
I installed "Full ABAP Edition-Trial" some days ago and everything worked fine without any problems. Windows on partition H: and programs (like sap and sapdb) on partition L:.
Because of an other problem I had to reinstall Windows on H:. I deleted the subfolders L:\SAP and L:\sapdb. to get a clean world for sap.
I start the installation process and setup asks me the path to install sap. I enter "L:\SAP". In the next screen it asks me about the database master password. I enter my password. In the next screen the setup tolds me to install the components MaxDB to L:\sapdb and application server to L:\SAP\NSP. Total Size: 18823.1 MB needed (By the way: I have 40 GB free).
I press the install button and installation process runs without errors. Then (after 2 minutes!) I get the screen that tolds me "The InstallShield Wizard has successfully installed SAP Netweaver 2004s ABAP Trial Version.".
So I start the SAP Management Console and start the instance. The icons become green and I see for example that the processes msg_server.exe and dispwork.exe are running. Dispwork.exe stops after a few seconds.
Looking to the system log I see "Communications data: Service initialization failed" and some "SAP-Basis System: Initialization DB-Connect Failed, Return Code 008192" messages.
When I press the database icon in the the SAP Management Console, I get a screen "page could not be displayed".
So it seems like a database problem. I look to the windows explorer and there is only the SAP-folder (with 341 MB). THERE IS NO SAPDB-FOLDER!!!
I can't find an installation-log to see if there were problems (No log.txt at SAP\NSP).
I deinstalled everything with deinstaller, run some registry cleaner and also installed a clean windows at H:, but everytime the same. I find note 572836 (Deleting SAPDB Registry entries and services) but it doesn't help.
I know when I installed SAP the first time (where it worked fine), I had not to install the microsoft loopback adapter. So I tried the installation with and without the adapter. No success!!!
I get crazy about it... Perhaps there is something wrong about the preinstalling environment: I download the two files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part2.rar to the folder L:\downloads. Then I unpack only the first one SAPNW2004sABAPTrail_part1.rar in the same folder. Then there is a new folder SAPNW2004sABAPTrail_part1. This one contains a folder SAPNW2004sABAPTrail. There are some folders and files. I change to the folder images. There I start the setup.exe (but before I installed the lookback adapter).
I'm a little bit irritated about the files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part1.rar. The first one has a size of 1536000KB and the SAPNW2004sABAPTrail_part2.rar has a size of 1249739KB. Just for analyze I unpack the SAPNW2004sABAPTrail_part2.rar-file and see that it has exactly the same structure like SAPNW2004sABAPTrail_part1.rar!!! Also the size of the unpacked files are the same. Is this normal???
So, that's my problem: No database here. Anyone here who has an idea? Please help me. I really need ABAP here!!!
Kindly regards,
AndyI have found the InstallationSteps.stat and install.log. Everything seems to be installed successfully, but no database is mentioned :-(. Here are the two files.
<u>I still need help!!!</u>
<b>=Start of InstallationSteps.stat====================</b>
CreateDirectories;20070108204154;20070108204155;Succeeded
CopyExecutables;20070108204155;20070108204157;Succeeded
AdaptProfiles;20070108204157;20070108204159;Succeeded
AddToServices;20070108204159;20070108204207;Succeeded
StartSCSInstance;20070108204207;20070108204232;Succeeded
StopSCSInstance;20070108204232;20070108204233;Succeeded
CreateXUserEntry;20070108204233;20070108204234;Succeeded
RestartServiceViaSAPControl;20070108204234;20070108204305;Succeeded
InstallMMC;20070108204306;20070108204308;Succeeded
<b>=End of InstallationSteps.stat====================</b>
and here is the install.log file:
<b>=Start of install.log ====================</b>
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:55
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:56
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_startSystem.cmd,L:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,L:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,L:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:57
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: L:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : L:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,L:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,L:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,L:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
finished successfully.
Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:59
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: L:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "L:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p L:\SAP\NSP\SYS\profile\START_DVEBMGS00_ammersee
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
finished successfully.
Elapsed time: 00:00:07 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:07
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: L:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=ammersee
Execute in current working dir: L:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
finished successfully.
Elapsed time: 00:00:23 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:32
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function StopWait 300 10
Stop instance in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:33
Stop
OK
08.01.2007 20:42:33
StopWait
OK
Process exited with rc: 0
Start external command...
08.01.2007 20:42:33
GetProcessList
OK
0 name: msg_server.EXE
0 description: MessageServer
0 dispstatus: GRAY
0 textstatus: Stopped
0 starttime: 2007 01 08 20:42:20
0 elapsedtime: 0:00:13
0 pid: -1
Process exited with rc: 4
SUCCESS: Execution of step: >> StopSCSInstance <<
finished successfully.
Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateXUserEntry
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.CreateXUserEntry.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateXUserEntry <<
finished successfully.
Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: RestartServiceViaSAPControl
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.RestartServiceViaSAPControl.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Restarting service via sapcontrol
Restart service with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function RestartService
Restart service in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:35
RestartService
OK
Process exited with rc: 0
SUCCESS: Execution of step: >> RestartServiceViaSAPControl <<
finished successfully.
Elapsed time: 00:00:30 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: InstallMMC
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:43:06
ACTION: * Logfile: steps.InstallMMC.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
INSTALL_MMC: Prepare to extract the SAPMMC
SAPMMC already extracted on cd. don't extract it a secon time.
INSTALL_MMC: Start to copy dll to SYSTEM32 directory
INSTALL_MMC: Copy sapmmc.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcada.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcdb6.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcinf.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcms.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy librfc32.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Start to copy the help file
INSTALL_MMC: Copy sapmmc.chm to H:\WINDOWS\help\
INSTALL_MMC: Start to copy the msc file
INSTALL_MMC: Copy sapmmc.msc to H:\WINDOWS\
INSTALL_MMC: Start to register dll
INSTALL_MMC: Register sapmmc.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmc.dll
INSTALL_MMC: Register sapmmcada.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcada.dll
INSTALL_MMC: Register sapmmcdb6.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcdb6.dll
INSTALL_MMC: Register sapmmcinf.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcinf.dll
INSTALL_MMC: Register sapmmcms.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcms.dll
SUCCESS: Execution of step: >> InstallMMC <<
finished successfully.
Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
<b>=End of install.log ====================</b> -
Installation Error SAP Netweaver 04s Full Abap ed. Sneak Preview
Hello i get an error when installing the trialversion of SAP Netweaver 04s Full Abap ed. Sneak Preview. Here is the error.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
FCO-00011 The step sdb_instance_activate with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_instance_activate was executed with status ERROR .
I tried to retry this step and also tried to install the application again. Also there is no XCMDOUT.LOG. Can anybody help me?Hello and sorry for this late answer, but i always change between school and company.
So here is the KNLDIAG:
Date Time TID(hex) Typ MsgID Label Message-Text
2006-03-20 09:33:01 0xE88 19705 CONNECT Loading default TCPIP-DLL, ( 'sqltcp.dll')
2006-03-20 09:33:01 0xE88 19707 CONNECT WINSOCK: 2.0, SQLTCP-DLL: 7.6.0
2006-03-20 09:33:01 0xE88 20233 RTE Dump of all kernel parameters start
2006-03-20 09:33:01 0xE88 20206 RTE Using mode NORMAL for data volume 1
2006-03-20 09:33:01 0xE88 20234 RTE ADMIN=1
2006-03-20 09:33:01 0xE88 20234 RTE _AK_DUMP_ALLOWED=YES
2006-03-20 09:33:01 0xE88 20234 RTE ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_ALLOW=
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_DENY=
2006-03-20 09:33:01 0xE88 20234 RTE AUTOSAVE=1
2006-03-20 09:33:01 0xE88 20234 RTE AUTO_RECREATE_BAD_INDEXES=NO
2006-03-20 09:33:01 0xE88 20234 RTE BACKUPRESULT=1
2006-03-20 09:33:01 0xE88 20234 RTE BACKUP_BLOCK_CNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_HISTFILE=dbm.knl
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_MED_DEF=dbm.mdf
2006-03-20 09:33:01 0xE88 20234 RTE CACHE_SIZE=12800
2006-03-20 09:33:01 0xE88 20234 RTE CALLSTACKLEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE _CAT_CACHE_MINSIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE CAT_CACHE_SUPPLY=3000
2006-03-20 09:33:01 0xE88 20234 RTE CHECKDATA=1
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_BACKUP=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATACACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATAPAGELOG=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_KB_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK_SUPPLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TABLE_WIDTH=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TRANSLIST=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CLUSTERED_IO=NO
2006-03-20 09:33:01 0xE88 20234 RTE COLUMNCOMPRESSION=YES
2006-03-20 09:33:01 0xE88 20234 RTE _COMMENT=
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLPASSWORD=***
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLUSERID=CONTROL
2006-03-20 09:33:01 0xE88 20234 RTE CONVERTER_REGIONS=8
2006-03-20 09:33:01 0xE88 20234 RTE DATABASEFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE _DATA_CACHE_RGNS=16
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_GROUPS=1
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_MODE_0001=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_NAME_0001=D:\DISKD0001
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_SIZE_0001=1036672
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_TYPE_0001=F
2006-03-20 09:33:01 0xE88 20234 RTE DATE_TIME_FORMAT=INTERNAL
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGBELOWLIMIT=70L80L85L90L95L
2006-03-20 09:33:01 0xE88 20234 RTE DDLTRIGGER=YES
2006-03-20 09:33:01 0xE88 20234 RTE DEADLOCK_DETECTION=4
2006-03-20 09:33:01 0xE88 20234 RTE DEFAULT_CODE=ASCII
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_COMMIT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_LOGWRITER=0
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_NUM=2
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_PATH=d:sapdbdatawrkNSPDIAGHISTORY
2006-03-20 09:33:01 0xE88 20234 RTE _DIAG_SEM=0
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_FLUSH=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_SIZE=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_LRU_TAIL_FLUSH=25
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_CHECK_INSTANCE=YES
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_SYSTEM_TRIGGERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE ERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTFILE=knldiag.evt
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTSIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE EVENT=1
2006-03-20 09:33:01 0xE88 20234 RTE EXPAND_COM_TRACE=NO
2006-03-20 09:33:01 0xE88 20234 RTE EXTERNAL_DUMP_REQUEST=NO
2006-03-20 09:33:01 0xE88 20234 RTE _FBM_LOW_IO_RATE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_BALANCE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_COMPRESSION=50
2006-03-20 09:33:01 0xE88 20234 RTE FILEDIR_SPINLOCKPOOL_SIZE=10
2006-03-20 09:33:01 0xE88 20234 RTE FORBID_LOAD_BALANCING=NO
2006-03-20 09:33:01 0xE88 20234 RTE FORMATTING_MODE=PARALLEL
2006-03-20 09:33:01 0xE88 20234 RTE FORMAT_DATAVOLUME=YES
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET_CACHESIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET=YES
2006-03-20 09:33:01 0xE88 20234 RTE HEAP_CHECK_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE HIRES_TIMER_TYPE=CPU
2006-03-20 09:33:01 0xE88 20234 RTE HS_STORAGE_DLL=libhsscopy
2006-03-20 09:33:01 0xE88 20234 RTE HS_SYNC_INTERVAL=50
2006-03-20 09:33:01 0xE88 20234 RTE _IDXFILE_LIST_SIZE=2048
2006-03-20 09:33:01 0xE88 20234 RTE INIT_ALLOCATORSIZE=237568
2006-03-20 09:33:01 0xE88 20234 RTE INSTANCE_TYPE=OLTP
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_FOR_PRIO=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_PER_DEV=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_SWITCH=2
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL4=64
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL9=5
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_SEARCH_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_TABLEBUFFER=128
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDIAGFILE=knldiag
2006-03-20 09:33:01 0xE88 20234 RTE KERNELDIAGSIZE=800
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDUMPFILE=knldump
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELTRACEFILE=knltrace
2006-03-20 09:33:01 0xE88 20234 RTE KERNELTRACESIZE=700
2006-03-20 09:33:01 0xE88 20234 RTE KERNELVERSION=KERNEL 7.6.00 BUILD 018-123-113-357
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_CHK=0
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_DIF=10
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_EQ=5
2006-03-20 09:33:01 0xE88 20234 RTE LOCAL_REDO_LOG_BUFFER_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _LOCK_SUPPLY_BLOCK=100
2006-03-20 09:33:01 0xE88 20234 RTE LOGABOVELIMIT=50L75L90M95M96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE LOGFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOGSEGMENTFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_BACKUP_TO_PIPE=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_IO_QUEUE=200
2006-03-20 09:33:01 0xE88 20234 RTE LOG_MIRRORED=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_SEGMENT_SIZE=4266
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_NAME_001=D:\DISKL001
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_SIZE_001=12800
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_TYPE_001=F
2006-03-20 09:33:01 0xE88 20234 RTE LRU_FOR_SCAN=NO
2006-03-20 09:33:01 0xE88 20234 RTE MAXBACKUPDEVS=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXCPU=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXDATAVOLUMES=11
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTS=100
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTTASKS=2
2006-03-20 09:33:01 0xE88 20234 RTE _MAXGARBAGE_COLL=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOCKS=300000
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOGVOLUMES=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXPAGER=16
2006-03-20 09:33:01 0xE88 20234 RTE MAXRGN_REQUEST=-1
2006-03-20 09:33:01 0xE88 20234 RTE MAXSERVERTASKS=63
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTASK_STACK=1024
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTRANS=264
2006-03-20 09:33:01 0xE88 20234 RTE MAXUSERTASKS=30
2006-03-20 09:33:01 0xE88 20234 RTE MAXVOLUMES=14
2006-03-20 09:33:01 0xE88 20234 RTE MAX_HASHTABLE_MEMORY=5120
2006-03-20 09:33:01 0xE88 20234 RTE MAX_LOG_QUEUE_COUNT=0
2006-03-20 09:33:01 0xE88 20234 RTE _MAX_MESSAGE_FILES=0
2006-03-20 09:33:01 0xE88 20234 RTE MAX_MESSAGE_LIST_LENGTH=100
2006-03-20 09:33:01 0xE88 20234 RTE MAX_RETENTION_TIME=480
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SERVERTASK_STACK=150
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SINGLE_HASHTABLE_SIZE=512
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SPECIALTASK_STACK=200
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_DATA_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_QUAL_SIZE=16384
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STACK_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STRAT_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE MCOD=NO
2006-03-20 09:33:01 0xE88 20234 RTE MEMORY_ALLOCATION_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MEM_ENHANCE_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MINI_DUMP=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE _MINREPLY_SIZE=4096
2006-03-20 09:33:01 0xE88 20234 RTE MINSERVERTASKS=53
2006-03-20 09:33:01 0xE88 20234 RTE MIN_RETENTION_TIME=60
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_READ=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_ROWNO=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_SELECTIVITY=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_TIME=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_LOOPS=1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_BUSY_WAIT=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_DIRTY_READ=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE MP_RGN_LOOP=-1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_QUEUE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _MULT_IO_BLOCK_CNT=4
2006-03-20 09:33:01 0xE88 20234 RTE OFFICIAL_NODE=
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_BLOCKSIZE=10000
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_THRESHOLD=100
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_RGNS=7
2006-03-20 09:33:01 0xE88 20234 RTE OMS_RUN_IN_UDE_SERVER=NO
2006-03-20 09:33:01 0xE88 20234 RTE OMS_STREAM_TIMEOUT=30
2006-03-20 09:33:01 0xE88 20234 RTE OMS_VERS_THRESHOLD=2097152
2006-03-20 09:33:01 0xE88 20234 RTE ONLINE=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_AGGREGATION=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FETCH_REVERSE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FIRST_ROWS=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASHTABLE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_ONEPHASE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OPERATOR_SORT=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OUTER=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_MIN_MAX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUAL_ON_INDEX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUERYREWRITE=STATEMENT
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_CACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_INV_ONLY=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_JOIN_FETCH=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_MAX_MERGE=500
2006-03-20 09:33:01 0xE88 20234 RTE OUTOFSESSIONS=2
2006-03-20 09:33:01 0xE88 20234 RTE _PACKET_SIZE=131072
2006-03-20 09:33:01 0xE88 20234 RTE _PAGE_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_COM=10
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_IOC=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_RAV=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_REX=40
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_U2U=100
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_FACTOR=80
2006-03-20 09:33:01 0xE88 20234 RTE PROTECT_DATACACHE_MEMORY=NO
2006-03-20 09:33:01 0xE88 20234 RTE _READAHEAD_BLOBS=32
2006-03-20 09:33:01 0xE88 20234 RTE REQUEST_TIMEOUT=5000
2006-03-20 09:33:01 0xE88 20234 RTE _RESTART_TIME=600
2006-03-20 09:33:01 0xE88 20234 RTE _ROW_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _RTEDUMPFILE=rtedump
2006-03-20 09:33:01 0xE88 20234 RTE RTE_TEST_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE RUNDIRECTORY=d:sapdbdatawrkNSP
2006-03-20 09:33:01 0xE88 20234 RTE SEQUENCE_CACHE=1
2006-03-20 09:33:01 0xE88 20234 RTE _SERVERDB_FOR_SAP=YES
2006-03-20 09:33:01 0xE88 20234 RTE SESSION_TIMEOUT=900
2006-03-20 09:33:01 0xE88 20234 RTE SET_VOLUME_LOCK=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_COMMANDCACHESIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_EXPECTEDSTATEMENTCOUNT=1500
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_KB_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE STANDBY=0
2006-03-20 09:33:01 0xE88 20234 RTE SUBTREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_DEMANGLING=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_RESOLUTION=YES
2006-03-20 09:33:01 0xE88 20234 RTE SYSTEMERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _TAB_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_01=tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_02=ti,100*dw;30000*us;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_03=compress
2006-03-20 09:33:01 0xE88 20234 RTE TIME_MEASUREMENT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_AK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ALLOCATOR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CATALOG=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CLIENTKERNELCOM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMUNICATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATACHAIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATAPAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATATREE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DBPROC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DEFAULT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DELETE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FILEDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FRAMECTRL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INDEX=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INSERT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IPC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_JOIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_KSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGACTION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LONG=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MESSAGES=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECTCONTAINER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ADD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ALTER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_FREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_GET=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTAINERDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTEXT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_ERROR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_FLUSHCACHE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_INTERFACE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEYRANGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_LOCK=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_NEWOBJ=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_SESSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_STREAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VAROBJECT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VERSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OPTIMIZE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER_STANDARD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_BUP=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_EV=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_GC=20
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_LW=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_PG=3
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_SV=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_TI=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_US=10
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_UT=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PRIMARY_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_QUERYREWRITE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_RUNTIME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SELECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SHAREDSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SQLMANAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_STOP_ERRORCODE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYNCHRONISATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYSVIEW=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TABLE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TIME=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_UPDATE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_VOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_HISTORY_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _TRANS_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_THRESHOLD_VALUE=60
2006-03-20 09:33:01 0xE88 20234 RTE UKT_CPU_RELATIONSHIP=NONE
2006-03-20 09:33:01 0xE88 20234 RTE _UNICODE=YES
2006-03-20 09:33:01 0xE88 20234 RTE UPDATESTAT_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE UPDSTATWANTED=1
2006-03-20 09:33:01 0xE88 20234 RTE USED_MAX_LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE USESELECTFETCH=YES
2006-03-20 09:33:01 0xE88 20234 RTE USEVARIABLEINPUT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _USE_ASYNC_IO=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_COROUTINES=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_FIBERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE _USE_IOPROCS_ONLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_MEM_ENHANCE=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_OPEN_DIRECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_SYSTEM_PAGE_CACHE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _UTILITY_PROTFILE=dbm.utl
2006-03-20 09:33:01 0xE88 20234 RTE UTILITY_PROTSIZE=100
2006-03-20 09:33:01 0xE88 20234 RTE VOLUMENO_BIT_COUNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _WORKDATA_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _WORKSTACK_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE XP_CONVERTER_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_DATA_CACHE_RGNS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_MAXPAGER=0
2006-03-20 09:33:01 0xE88 20235 RTE Dump of all kernel parameters done
2006-03-20 09:33:01 0xE88 19841 DIAGHIST Backup of diagnostic files is in progress
2006-03-20 09:33:01 0xE88 19842 DIAGHIST Backup of diagnostic files has finished
2006-03-20 09:33:01 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19600 VERSION 'W32/INTEL 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19769 INFO Starting SERVERDB: 'NSP'
2006-03-20 09:33:01 0xE88 19770 INFO SERVERNODE: 'AUA5062'
2006-03-20 09:33:01 0xE88 19771 INFO Process ID: 2724
2006-03-20 09:33:01 0xE88 19773 INFO Date: 2006-03-20
2006-03-20 09:33:01 0xE88 19772 INFO Owner: 'SYSTEM'
2006-03-20 09:33:01 0xE88 19775 INFO Processors: 1
2006-03-20 09:33:01 0xE88 19782 INFO Fiber: 'YES'
2006-03-20 09:33:01 0xE88 19776 INFO Max virtual memory: 2047 MB
2006-03-20 09:33:01 0xE88 19777 INFO Total physical memory: 1015 MB
2006-03-20 09:33:01 0xE88 19778 INFO Available physical memory: 535 MB
2006-03-20 09:33:01 0xE88 20219 RTE Memory allocation not limited
2006-03-20 09:33:01 0xE88 20220 RTE System page cache usage enabled
2006-03-20 09:33:01 0xE88 19692 TCLUSTER tw;al;ut;2000*sv,100*bup;10*ev,10*gc;ti,100*dw;30000*us;compress
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of 'BUP': 0
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' DW': 16
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' US': 30
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' SV': 63
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' EV': 2
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' GC': 1
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Total Number of UKT 7
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Number of UKT with User Tasks 1
2006-03-20 09:33:01 0xE88 19860 MEMORY I/O buffer cache: 12800 Pages allocated
2006-03-20 09:33:01 0xE88 19811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2006-03-20 09:33:01 0xE88 19812 EVENTING Eventbuffer 100 events 2 tasks
2006-03-20 09:33:01 0xBBC 19821 TASKING Thread 3004 starting
2006-03-20 09:33:02 0xE88 19831 TRACE_IO Configured _MAX_MESSAGE_FILES:0
2006-03-20 09:33:02 0xE88 19832 TRACE_IO Disabled: No TraceMessagefiles wanted
2006-03-20 09:33:02 0xA1C 19688 THREAD CLOCK thread started
2006-03-20 09:33:02 0xF6C 19688 THREAD TIMER thread started
2006-03-20 09:33:02 0x140 19688 THREAD ASYNC0 thread started
2006-03-20 09:33:02 0x300 20213 RTE CONSOLE thread started
2006-03-20 09:33:02 0xEF4 19688 THREAD REQUESTOR thread started
2006-03-20 09:33:02 0x128 19821 TASKING Thread 296 starting
2006-03-20 09:33:02 0xB28 19821 TASKING Thread 2856 starting
2006-03-20 09:33:02 0x124 19821 TASKING Thread 292 starting
2006-03-20 09:33:13 0xE88 19649 CONNECT Kernel threads initialization timeout
2006-03-20 09:33:13 0xF44 19821 TASKING Thread 3908 starting
2006-03-20 09:33:13 0x3B8 19821 TASKING Thread 952 starting
2006-03-20 09:33:13 0x9F0 19821 TASKING Thread 2544 starting
2006-03-20 09:33:13 0x40C 19821 TASKING Thread 1036 starting
2006-03-20 09:33:13 0xD14 19627 TASKING UKT started, TID:0xD14
2006-03-20 09:33:13 0x664 19627 TASKING UKT started, TID:0x664
2006-03-20 09:33:13 0xB70 19627 TASKING UKT started, TID:0xB70
2006-03-20 09:33:13 0x80C 19627 TASKING UKT started, TID:0x80C
2006-03-20 09:33:13 0x908 19627 TASKING UKT started, TID:0x908
2006-03-20 09:33:13 0x448 19627 TASKING UKT started, TID:0x448
2006-03-20 09:33:13 0xEE8 19627 TASKING UKT started, TID:0xEE8
2006-03-20 09:33:13 0xEE8 19615 VOLUMEIO Attaching volume 'knltrace'
2006-03-20 09:33:13 0x830 19613 DBSTATE I/O thread for 'knltrace' started
2006-03-20 09:33:13 0xEE8 20038 Admin Kernel state: 'ADMIN' reached
2006-03-20 09:33:13 0xEE8 20023 Pager Initialized without clustered IO
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR item size : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR num items : 30
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B930_HIST_DIR : 240
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFileListItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListSizeAll : 16384
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemPtrSize : 4
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemSize : 36
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX SortItemSize : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFunnelItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelSizeAll : 131072
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B49_IDXSIZE : 147456
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K57_KB_PAGES : 11
2006-03-20 09:33:13 0xEE8 9 SrvTasks Available Servertasks: 63
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 208
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 96
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 656
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_SAVE_GLOB : 1584
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_SAVE : 217
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 128
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_AUTOSAVE : 880
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_AUTOSAVE : 41
2006-03-20 09:33:13 0xEE8 19930 TASKING Kernel initialization completed
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 5
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:0
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 20
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:1
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 19
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:2
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 18
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:3
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 17
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:4
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 16
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:5
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 15
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:6
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 14
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:7
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 13
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:8
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 12
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:9
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 11
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:10
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 10
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:11
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 9
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:12
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 8
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:13
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 7
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:14
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 6
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:15
2006-03-20 09:33:13 0xF6C 3 RunTime State changed from STARTING to ADMIN
2006-03-20 09:33:13 0xF6C 19601 DBSTATE SERVERDB is ready
============================================ begin of write cycle ==================
2006-03-20 09:33:13 0xF6C 20223 RTE Database tries automatic restart
2006-03-20 09:33:13 0x1F0 19821 TASKING Thread 496 starting
2006-03-20 09:33:13 0x448 19633 CONNECT Connect req. (T21, Node:'', PID:4084)
2006-03-20 09:33:13 0x448 19615 VOLUMEIO Attaching volume 'D:\DISKD0001'
2006-03-20 09:33:13 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 13 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0x448 ERR 20031 IOMan IOMan_Volume.cpp:976
2006-03-20 09:33:15 0x448 ERR 20031 IOMan 2006-03-20 09:33:15 IOMan Error 20031
2006-03-20 09:33:15 0x448 ERR 20031 IOMan Attach error on Data volume 1: error evaluating volume
2006-03-20 09:33:15 0x448 ERR 3 Admin Kernel_Administration.cpp:606
2006-03-20 09:33:15 0x448 ERR 3 Admin 2006-03-20 09:33:15 Admin Error 3
2006-03-20 09:33:15 0x448 ERR 3 Admin Database state: OFFLINE
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Trace.cpp:223
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 KernelCommon Info 6
2006-03-20 09:33:15 0x448 ERR 3 Admin - Internal errorcode, Errorcode 9050 "disk_not_accessible"
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Administration.cpp:365
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 Admin Error 20014
2006-03-20 09:33:15 0x448 ERR 3 Admin - RestartFilesystem failed with 'I/O error'
2006-03-20 09:33:15 0x448 19651 CONNECT Connection released, T21
2006-03-20 09:33:15 0x448 19621 DBSTATE Shutdown kill requested
2006-03-20 09:33:15 0xE88 ERR 7 Messages Msg_List.cpp:3617
2006-03-20 09:33:15 0xE88 ERR 7 Messages 2006-03-20 09:33:15 Messages Error 7
2006-03-20 09:33:15 0xE88 ERR 7 Messages Begin of dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 10 Messages Msg_List.cpp:3631
2006-03-20 09:33:15 0xE88 ERR 10 Messages 2006-03-20 09:33:15 Messages Error 10
2006-03-20 09:33:15 0xE88 ERR 10 Messages abort dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 8 Messages Msg_List.cpp:3636
2006-03-20 09:33:15 0xE88 ERR 8 Messages 2006-03-20 09:33:15 Messages Error 8
2006-03-20 09:33:15 0xE88 ERR 8 Messages End of the message list registry dump
2006-03-20 09:33:15 0xD14 20000 Trace Start flush kernel trace
2006-03-20 09:33:15 0xD14 19617 VOLUMEIO Single I/O attach, 'knltrace', UKT:1
2006-03-20 09:33:15 0xE88 19684 TASKING Tracewriter termination timeout: 1200 sec
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE RTE_ExternalCall.cpp:877
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE 2006-03-20 09:33:15 RTE Error 20125
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE Database automatic restart failed
2006-03-20 09:33:16 0xD14 20001 Trace Stop flush kernel trace
2006-03-20 09:33:16 0xD14 20002 Trace Start flush kernel dump
2006-03-20 09:33:16 0xD14 20003 Trace Stop flush kernel dump
2006-03-20 09:33:16 0xD14 19619 TASKING Releasing tracewriter
2006-03-20 09:33:16 0xE88 19890 DIAGHIST Backup of diagnostic files will be forced at next restart
2006-03-20 09:33:16 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:16 0xE88 19654 DBSTATE SERVERDB 'NSP' has stopped
-------------------------------------------- current write position ---------------- -
Full ABAP Edition-Trial Problems
Hi
I have downloaded and installed the Full ABAP Edition-Trial (with Web Dynpro for ABAP!) from SDN site. However I am not able to use it, as I am getting the following error:
<b>partner not reached(host 10.10.0.10, service sapdp00)
WASECONNREFUSED: Connection refused</b>
Also in MMC i find that the Dispatcher shows the status as stopped. Initially says Running but not connected to Message Server. Its yellowin color but then suddenly stops.
I have followed all the installation prococedure which was provided, but it does not work.
Plz help me out. Helpful answers will surely be rewarded.Hi,
I faced similar problems when am not connected to the VPN. so check if u r connected to VPN, if u have one before logging on to SAP system.
regards,
madhu -
Unable to install Full ABAP Edition-Trial
Hello Gurus,
I am unable to install Full ABAP Edition-Trial.
When it comes to more than 80% (status message shows : initializing database connection), after sometime it starts uninstalling.
Then it shows a message prompting to see the error log. the error log file is as shown below.
Start of log********************************
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 5:38:14 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:14 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
End of log****************************
Can you guys (and gals ofcourse) please help me??
I have tried it 5 times atleast and everytime i have verified the system requirements.
I have installed loopback adapter, in other words i have done everything that is specified in the instructions.
Thanks and Regards,
Haseeb.Hello all!
Sorry for the late response.
My installation of sap worked.
It was the firwewall. I shut them down and it worked.
<b>Thanks a lot!!!!</b>
<b>
This was my error message:</b>
(Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details. (Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
<b>If you have still problems with uninstalling SAP here is the way I did it:</b>
<u>1.</u> Delete folders SAP and sapdb. If you can not delete them, restart
your windows in save mode. Then it is possible to delete them (I
know it is not a sensitive method J ).
<u>2.</u> After that runt the RegCleanTool with prompt (sapstartsrv.exe u --
this is the way you have to do it)
<u>3.</u> Then you can have a new try for installing SAP
Thanks again for your help
Bye -
Full ABAP Edition-Trial instalation problems
Hi,
I tried to install the Fulle ABAP edition Tiral but I had some problems I can't solve on my own.
The first steps was alright and real installation began until Step 4.
At this point there was 24 actiosn to cmplete. The 16th first was alright but during the 17th ( Import ABAP) the system freeze. I try to stop install, reboot my computer and try again, it didn't freeze but the 18 jobs in ABAP import failed.
I tried to uninstall all I began to install and try to restart from the begining but the unistall process failed.
Each time I try to restart a new install or to continue the existing one, a message is displayed saying that I can try again, stop, or reset the data for the current task in order to restart the task without crash... but how to do so?
please help cause I don't understand at all... unable to install , unable to reinstall unable to uninstall.
Regards,
MorganHi Subhash
Do U rally think that formating Hard Disk is the only way to continu install? Cause doing so will take a long time and I will have a lot of thing to install so, I would like to found a way to continue install from this point not to restart all and format my harddisk.
regards,
Morgan -
Full ABAP Edition-Trial (with Web Dynpro for ABAP) Max DB data volume
I recently installed Full ABAP Edition-Trial (with Web Dynpro for ABAP)- SPS08.
http://static.flickr.com/89/243544270_91e713e3a3_o.jpg
as you can see, it's already 92% acquired ( just after installation)
Is it correct?
or it's better to add another volume?
The other question is
according to the license installation guide,
it sounds like we can delete the temp licese with SAP*.
so I did like that but i got the following message
http://static.flickr.com/81/243546622_bc99d1af2b_o.jpg
Well, I could delete the old license with BCUSER.
Thanks,
DavidHello,
to your first question.
The MaxDB database has a feature which can
increase the database automatically.
This ( auto_extend ) is turned on for the SDN Preview
installation.
That means the database should extend a further datavolume
automatically when the filling level gets over 90%.
In your case the database already added two more datavolumes. The installation only creates one.
Best regards, Stefan -
SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24
While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know. -
Problems with MiniSAP-Installation JAVA and ABAP Stack
Hi,
I am a freelance SAP application developer had bought the book and SAP Interactive Forms by Adobe, in order to incorporate me into the topic. In chapter 3, the installation and configuration of an exercise Systemes is described so that you can perform the practical part. I downloaded at the website mentioned the installation files and have performed the installation as described in the book. I have also stopped the service as described in SAP DB WWW.
The installation of the JAVA section runs smoothly and is operational after the installation. The ABAP part crashes, however. According to my research, it is because the ABAP part is also intends to install a MAXDB, although the Java-part has realized this already. Anyone know what I need to do, so I only described as the application server of the ABAP part of getting installed and not again the MAXDB.
RegardsHello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj -
Problems in the installation the sneak preview sap NetWeaver 04s-full ABAP
hello to all!!!!!!!
I have problems in phase 24 of the installation.The message of log is the following one:
ERROR 2006-03-25 17:33:28
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
ERROR 2006-03-25 17:33:29
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2006-03-25 17:33:29
FCO-00011 The step createIGSDestination with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|13|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|createIGSDestination was executed with status ERROR .
Somebody can help me to solve this problem. Asi I can of a good time learn abap!!!!!
thanks!!!!!!Hi,
Is the error in the phase "Change default passwords"?
Have you tried restarting the SAPInst? If the restart
doesn't help, please try to get a newer version of SAPInst
and continue. Note 929929 might help.
Regards
Srikishan -
Problem Installation Full ABAP Edition-Trial (with Web Dynpro for ABAP!)
Hi all,
I have a problem during installation of new Netweaver 2004s Trailversion. The problem is while installing MaxDB. In file MaxDBSAPNWPREV.log I found the following installationsteps (the error you will see at the bold part at the end):
(Oct 3, 2006 3:58:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file G:\sapdb\NSP\log.txt for details.
(Oct 3, 2006 3:58:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile D:/DOCUME1/ELFLEI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile D:/DOCUME1/ELFLEI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction (Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Start SoftwareCheck
Tue Oct 03 15:10:57 CEST 2006 MaxDB: IndepProgPath: g:\sapdb\programs
Tue Oct 03 15:10:57 CEST 2006 MaxDB: IndepDataPath: g:\sapdb\data
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Calling check for dbmcli
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Software exists, Variable MAXDB_SOFTW_EXISTS set to YES
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Calling check for existent database instances
Tue Oct 03 15:10:58 CEST 2006 MaxDB waiting for :"g:\sapdb\programs/pgm/dbmcli.exe" db_enum:
Tue Oct 03 15:10:59 CEST 2006 MaxDB: These database instances already exists =
Tue Oct 03 15:10:59 CEST 2006 MaxDB: End of SoftwareCheck!
Tue Oct 03 15:12:33 CEST 2006 MaxDB: Start of Extracting Software and Backup.
Tue Oct 03 15:57:03 CEST 2006 MaxDB: End of Extracting Software and Backup.
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Start of CallSdbinst
Tue Oct 03 15:57:03 CEST 2006 MaxDB: IndepProgPath = g:/sapdb/programs
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Stopping x_server
Tue Oct 03 15:57:03 CEST 2006 MaxDB program: g:/sapdb/programs/bin/x_server.exe
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Found g:/sapdb/programs/bin/x_server.exe
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Calling: "g:/sapdb/programs/bin/x_server.exe" stop
Tue Oct 03 15:57:05 CEST 2006 MaxDB: rc of x_server stop call = 0
Tue Oct 03 15:57:05 CEST 2006 MaxDB: inst_type = :restore:
Tue Oct 03 15:57:05 CEST 2006 MaxDB: Calling sdbinst with template option sapmds
Tue Oct 03 15:57:05 CEST 2006 MaxDB SID: NSP
Tue Oct 03 15:57:05 CEST 2006 MaxDB drive: G:\
Tue Oct 03 15:57:05 CEST 2006 MaxDB softwarepath: G:/sapdb
Tue Oct 03 15:57:05 CEST 2006 MaxDB Software location: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:05 CEST 2006 MaxDB backup_loc: G:/sapdb/NSP/_tempLocation/load/load_datasave
Tue Oct 03 15:57:05 CEST 2006 MaxDB program: G:/sapdb/NSP/_tempLocation/sdbinst.exe
Tue Oct 03 15:57:05 CEST 2006 MaxDB paramfile: G:/sapdb/NSP/_tempLocation/sapmds.txt
Tue Oct 03 15:57:05 CEST 2006MaxDB found sdbinst
Tue Oct 03 15:57:05 CEST 2006 MaxDB: Calling: G:/sapdb/NSP/_tempLocation/sdbinst.exe -t sapmds -f "G:/sapdb/NSP/_tempLocation/sapmds.txt" -p DBNAME=NSP -p SOFTWAREPATH="G:/sapdb" -p INSTANCEBACKUP="G:/sapdb/NSP/_tempLocation/load/load_datasave"
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: Installation of MaxDB Software
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: *******************************
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: starting installation Tu, Oct 03, 2006 at 15:57:12
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: operating system: Windows I386 NT 5.1 Service Pack 2
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: callers working directory: D:/SAP_Install/SAPNW2004sABAPTrail/image
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: installer directory: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: archive directory: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst: starting preparing phase of package Base 7.6.00.32 32 bit
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:38 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:38 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: check rte registration of package... ok
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: starting preparing phase of package SAP Utilities 7.6.00.32 32 bit
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 7.6.00.32 32 bit
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: starting preparing phase of package JDBC 7.6.00.30
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: starting preparing phase of package Server Utilities 7.6.00.32 32 bit
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: starting preparing phase of package Database Kernel 7.6.00.32 32 bit
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: check rte registration of package... ok
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: starting preparing phase of package Messages MSG 0.3951
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: starting preparing phase of package ODBC 7.6.00.32 32 bit
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: starting preparing phase of package Webtools 7.6.00.32 32 bit
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:55 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.32 32 bit
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Oct 03, 2006 at 15:58:03
<b><b><b>Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: creating database NSP...
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: ERROR: Backup check for 'G:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Tue Oct 03 15:58:04 CEST 2006 MaxDB sdbinst: File not found: G:\sapdb\NSP\_tempLocation\load\load_datasave</b>Tue Oct 03 15:58:04 CEST 2006 MaxDB sdbinst: installation exited abnormally at Tu, Oct 03, 2006 at 15:58:03
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Error during call to sdbinst, rc= 1
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Done with call_sdbinst
Tue Oct 03 15:58:04 CEST 2006 MaxDB: rc of sdbinst = 1
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Start of CallSdbuninst
Tue Oct 03 15:58:04 CEST 2006 MaxDB: IndepProgPath: g:/sapdb/programs
Tue Oct 03 15:58:04 CEST 2006 MaxDB: dbmcli path: g:/sapdb/programs/pgm/dbmcli.exe
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Calling check for db_enum in case of an abort
Tue Oct 03 15:58:05 CEST 2006 MaxDB: nsp doesn't exist. Nothing to do !
Tue Oct 03 15:58:05 CEST 2006 MaxDB: rc of Method: 3
Tue Oct 03 15:58:05 CEST 2006 MaxDB: IndepProgPath = g:/sapdb/programs
MaxDB: dbmcli_path = g:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Oct 03 15:58:05 CEST 2006 MaxDB: End of CallSdbuninst
Tue Oct 03 15:58:05 CEST 2006 MaxDB: End of uninstallation at java.lang.Thread.run(Unknown Source)</b></b>Please referr to the ideas on this thread.
Install Problems withe the NW04s ABAP Trial verssion
You have installed the loopback adapter and made the propriate entries in the hosts file, right?
Regards,
Rich Heilman -
Installation Problem - SAP Netweaver 2004s Full ABAP Edition Trail
Hi I got a problem while installing SAP Netweaver 2004s Full Edition Trail
I am using the following <b>installation guide </b>as reference
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eea83e34-0801-0010-46a2-e830cb0d496f">Link for the Installation Guide I am referring</a>
The installation process went fine for couple of hours during which the NSP database was installed successfully and it initialized the database connection................but all of a sudden it <b>started reverting back and uninstalled all the components.</b>
The log file shows the following:
*************************start of log*****************************
[code]
(Mar 2, 2007 11:27:13 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Mar 2, 2007 11:27:13 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file C:SAPNSPlog.txt for details.
(Mar 2, 2007 11:27:13 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:91)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Mar 2, 2007 11:32:25 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:SAPNSPlog.txt for details.
(Mar 2, 2007 11:32:25 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(UnknownSource)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(UnknownSource)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(UnknownSource)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(UnknownSource)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(UnknownSource)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(UnknownSource)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(UnknownSource)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[/code]
******************************end of log***************************
It would be really great if someone could come up with some sort of suggestion.
Thank you,
Ravi.hi Ravi,
pls. have a look at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37">trouble shooting guide</a> and follow the steps.
regards, Manfred -
Installation Full ABAP Edition-Trial: NoClassDefFoundError
Hello,
At running the setup.exe, I get the error from the InstallShield Wizard:
java.langNoClassDefFoundError: run Exception in thread "main"
I fulfilled all requirements and took all nessecary steps, like installing:
- Java(TM) 2 SDK, Standard Edition 1.4.2_08
- MS Loopback Adapter.
- unpacked in D:\SAPNW\Foud the solution myself:
Start D:\SAPNW\image\setup.exe directly.
A classic case of RTFM. -
Error during installation of SAPNW ABAP 701SR1 SP3 trial version in phase 2
Hi,
I am trying to install SAPNW ABAP 701 SP3 trial version.I am getting error in phase 2
Running msiexec failed with return code 1603: Fatal error during installation.
I am installing on window vista.I have also checked the security setting for the user I am trying to install.It is adminstrator and have access for full control.
When I started the installation of sap it asked me for master password and that password is different from what I use to log on to windows.Could this be the reason for this problem or something else ?
Any help appreciated.
Thanks,
Rekha.Install SAP MMC snap first and continue with old installation.... it will pass 2nd phase
thank you
Mohan -
Problems with installation SAP Netweaver ABAP 7.0
Hello, can someone give me an adice on installing SAP NetWeaver ABAP 7.0 trial version, please?
After installing the application server and SAP management konsole and stopping the application server following message pops up. The same message pops up after installing SAP GUI and starting the application server again.
Can this be caused by bad installation of MS Loopback Adapter on my Windows Vista?
===================================================
============== Stopping System NSP ================
===================================================
========= Stopping ABAP instance ====
23.05.2009 15:28:06
Stop
OK
23.05.2009 15:28:16
StopWait
OK
========= Stopping database instance ...
The MaxDB Database Stopper, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24701,ERR_EXHNDLR: Could not initialize exception handler.
-24748,ERR_FILEOPEN: Error opening file C:sapdbdatawrkdbmsrv_DATART-PC.err
-24826,ERR_NIERROR: Can not open file 'C:sapdbdatawrkdbmsrv_DATART-PC.err'.
(System error 5; Přístup byl odepřen.)
Error: Error while calling dbmcli
"C:sapdbprogramspgmdbmcli" -d NSP -u , db_offline -nc
============== Stop database failed !
Pokračujte stisknutím libovolné klávesy.
Please see how I installed MS Loopback Adapter:
Download the DevCon compressed file, and then extract the files:
a. Visit the following Microsoft Web site for download: DevCon
b. Save the Devcon.exe file to a folder on your computer, and then open the folder.
c. Double-click Devcon.exe.
d. In the Unzip to path box, type the folder where you want to unzip the files, and then click Unzip.
e. Click OK, and then Close to complete the unzip process.
2. Install the Microsoft Loopback Adapter:
a. At a command prompt, change directory to the folder where you extracted the DevCon files.
b. Change directory to the i386 folder.
c. Type devcon.exe install %windir%inf
etloop.inf *msloop, and then press ENTER. You see output that is similar to the following:
Device node created. Install is complete when drivers are updated...
Updating drivers for *msloop from C:WINDOWSinf
etloop.inf.
Drivers updated successfully.
Can someone help?
Thanks a lot.
MilanHi Milan,
I´m sorry but i think i´m not able to help you so much. I´ve just installed SAP in my Laptop but with XP-Professinal. At first i had some troubles too and at the end i had to reinstall it to make it run properly so i think i cannot help you very much. Sorry.
Despite this, take a look at the detailed instructions of how to set up MS Loopback Adapter when you execute the file start of the SAP installation. You can check if the MS Loopback adaptor is working or not. And do not forget to search messages in relation with errors (-24700,ERR_DBMSRV_NOSTART, etc...)
Maybe it´s a silly question but it´s really stopped the database ? when you open the SAP Console the server and the database are in grey ?
Joaquin Casas Baca-Castex
Maybe you are looking for
-
How to default bind variable using session variable at run time
Hi All, I have a requirement where all VO queries (multiple VOs) produce only records that meet a certain value. For example, I have three tables with 3 VOs and each of them has a one-to-many relationship to another table (let's call it ref table and
-
Error while configuring Principal Propagation
Hi, I am trying to configure Principal Propagation for a Proxy -> PI -> RFC, sync scenario. I am working on PI 7.1 SP6 and when i am trying to configure the "Configuration Adapter" in JAVA stack i am not able to find the following config. properties:
-
A few more questions on upgrading OS
Well, I'm trying to be proactive before I try to upgrade my current mini from tiger to snow leopard os. So far, I've purchased the box set purchased the external hard drive downloaded carbon copy app learned how to do a back up and reboot and run fro
-
Hello Experts, Right now i m working on the scenario SRM -> XI -> 3rd party system. Here i want to send data from SRM to XI, and for that i m using Sender RFC Adapter. I have configured RFC Sender channel in XI and created RFC Destination into the SR
-
System freezes sometimes after logging out of x
For some reason when I go out of x the system (at that window) freezes so I cant input anything. I can kill the process from another tty. What is it that makes it so?