Installation of Portal fails with Disc space error
Hello,
I want to install EP but during setup I get this error:
Check for free disc space in tmp and usr directories for at least 600MG.
So first, what means MG, should this be MB?
On our root filesystem, which includes both directories, I have 25GB space free!!!
Can anyone help me? Regards Manfred
Hi all,
now I'm back to this topic and it seems that Installing Enterprise Portal is a way with some barriers.
-Firstly it seems "600MG" is only wrongly written from SAPINST.
- One Question to Daniel: "the page size of the datavolume", how can this be checked and changed.
- I have verified our free disc space and of course, there's enough.
- I checked the Code of the Analyzer Job and found what's wrong. Inside this, there happens an <i>execution of an Unix command "df -k" for both directories and examining the free space with an "Unix-awk" on that result</i>. But in our case, where we use Logical Volume Groups, we get an empty result, because the displayed Column for the free space is on the next line.<b>I renamed df to d_f and have written a small, new df-script "/bin/d_f -Pl $1 $2" and then the SAP-Installer continues</b> !!!
- Next failure occured during Deploying DQE (especially to com.sapportals.dqe.beans we get a ClassNotFoundException for com.metamatrix.platform.service.api.exception.ServiceException), but after restarting the J2EE-Engine and restarting SapInst it continues.
- Next Error, now blocking:
Info: Initial deployment: Selected development component 'com.sapportals.portaladmin.defaultwizards'/'sap.com'/'SAP AG'/'609.20041012204607.0000' will be deployed.
Caught Exception: java.lang.NullPointerException
java.lang.NullPointerException at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.doSu
bstitution(DeplParamVarSubstProcessorImpl.java:238)
Has anyone an Idea?
Similar Messages
-
During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
ThxClaasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages. -
Solaris 10 Update 1 PXE Installation on SPARC fails with the error message.
Hi,
The remote installation is continiously failing for older updates, I tried with different images but all fails with the same error message ' Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode" , the log of the same given below:-
{1} ok boot net:dhcp -v install
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V240, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Rebooting with command: boot net:dhcp -v install
Boot device: /pci@1f,700000/network@2:dhcp File and args: -v install
1000 Mbps FDX Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps FDX Link up
Using BOOTP/DHCP...
Using DHCP for network configuration information.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:05:58 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
<unknown>: warning: dhcpagent: daemonize: timed out awaiting adoption.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:06:40 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
# svcs -xv
svc:/system/install-discovery:default (install-discovery)
State: maintenance since Sun Mar 17 13:07:00 2013
Reason: Start method failed repeatedly, last exited with status 130.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-install-discovery:default.log
Immediate response in this case is appreciated.
Thanks
ASModerator Comment:
Immediate response in this case is appreciated.No.
This is not company technical support.
If you want speedy assistance, use your contract credentials and log a support case.
No one here is paid to respond.
No one here is a company representative, nor are they responding as representatives of the company. There is no obligation that any inquiry get assistance, and your presumptive statement is bordering on being rude. -
Here's the error summary:
Exit Code: 6
See error summary below:
I installed the Visual C++ 2008 redis pkg from Microsoft site (both x86&x64) then tried reinstalling and after 2 hours the very error and nothing installed!!!
VERY FRUSTRATING...
Please advise
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "\\nbcc-srv-v-fs01\co-share\Finance and Administration\Information Technology\Software\Adobe\MasterCollection_CS6_LS16\WIN\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.comuninstall those old ms vc packages and install the latest, Latest Supported Visual C++ Downloads
then uninstall anything cs6 that did get installed, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
My install of Photoshop CC failed during download with the error message:
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Charles\AppData\Local\Temp\{6451C8AE-D1A8-4B06-9A19-583A0AAC7146}\Photoshop_15_ LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
But I don't find anything in the path described.
The machine is an Asus desktop PC running Windows 8.1 (which I hate and despise) but was stuck with on this recently purchased PC.
Since I can't find the file or error code -2147024546 what is my next step to complete an install?
Thanks,
CharlesCharles the Microsoft Visual C++ 2012 Redistributable Package (x86) component of your operating system has become damaged. You can reinstall it from Latest Supported Visual C++ Downloads.
-
Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603Same problem. I have CC installed on Win 7 with all other apps working fine. Tried to install Lightroom 5 and got:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.0.0 Adobe_Lightroom_x64.msi_5.7 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {5C21D397-1DA5-
3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
I uninstalled all Adobe CC software, ran Adobe CC Cleaner, cleaned my Registry using Piriform CCleaner 5, rebooted and reinstalled CC from scratch. Same problem--everything else installed correctly except Lightroom 5. Also tried uninstalling KB2918614--no joy.
Dayton -
every time i download lightroom 5 it fail and says the cause is this (errror: third party payload installer Adobe_Lightroom.msi failed with exit code: 1603..
you should dl lr 5.7 and then check that your download is complete. if the same error message results when you try to install, start here - Error 1603: A fatal error occurred during installation
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable atWhitmack please reinstall Microsoft Visual C++ 2012 Redistributable Package (x64) from Latest Supported Visual C++ Downloads.
-
Windows 8 USB recovery fails with CTOERROR.flg error
Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Third party payload installer DistillrStarter.exe failed with exit code: 1603
I need to reinstall FrameMaker 11 after a system crash. At 99% of the installation process, I get the following message.
(For my understanding, downloading a new DistillrStarter.exe should solve the issue.
The file is for creating Japanese PDFs. I do not even need it. :-)
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW030 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe PDF Creation Add-On 10 10.0.0.0 {AC76D478-1033-0000-3478-000000000005} -----------
ERROR: Third party payload installer DistillrStarter.exe failed with exit code: 1603
----------- Payload: Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} -----------
ERROR: DW030: Custom Action for payload Adobe FrameMaker 11_AdobeFrameMaker11_en_US 11.0.0.0 {E26880FB-DEB4-4299-A1EB-FDEB85C09FD7} returned error. Failing this payload.Hi Mylenium,
from the notifications, IMHO, FrameMaker installation failed because of a corrupt DistillrStart.exe file in the installer.
What I did not know, in the installation options, I could disable PDF maker.
I do not need this module, that is already installed with Acrobat Pro on my system.
In the support chat, I was not pointed to this, either. Although I asked if I really had to uninstall
all Adobe software from my system before re-installing, even Acrobat...
Thank God, my company's administration remembered this issue from a previous installation.
Best regards,
Michael -
Backup Fails with Invalid RECID Error
Hi All,
Please help me to understand Caution -section
below text is from
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Backup Fails with Invalid RECID Error: Solution 2
This solution is more difficult than solution 1:
To create the control file with SQL*Plus:
1. Connect to the target database with SQL*Plus. For example, enter:
% sqlplus 'SYS/oracle@trgt AS SYSDBA'
2. Mount the database if it is not already mounted:
SQL> ALTER DATABASE MOUNT;
3. Back up the control file to a trace file:
SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
# The following commands will create a new control file and use it
# to open the database.
# Data used by the recovery manager will be lost. Additional logs may
# be required for media recovery of offline data files. Use this
# only if the current version of all online logs are available.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG
-- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 1
MAXLOGHISTORY 226
LOGFILE
GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M,
GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M,
GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K
-- STANDBY LOGFILE
DATAFILE
'/oracle/oradata/trgt/system01.dbf',
'/oracle/oradata/trgt/undotbs01.dbf',
'/oracle/oradata/trgt/cwmlite01.dbf',
'/oracle/oradata/trgt/drsys01.dbf',
'/oracle/oradata/trgt/example01.dbf',
'/oracle/oradata/trgt/indx01.dbf',
'/oracle/oradata/trgt/tools01.dbf',
'/oracle/oradata/trgt/users01.dbf'
CHARACTER SET WE8DEC
# Take files offline to match current control file.
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
# Configure RMAN configuration record 1
VARIABLE RECNO NUMBER;
EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
DEBUG 255');
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE
# All logs need archiving and a log switch is needed.
ALTER SYSTEM ARCHIVE LOG ALL;
# Database can now be opened normally.
ALTER DATABASE OPEN;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
# End of tempfile additions.
5. Shut down the database:
SHUTDOWN IMMEDIATE
6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
STARTUP NOMOUNT
CREATE CONTROLFILE ...;
EXECUTE ...;
RECOVER DATABASE
ALTER SYSTEM ARCHIVE LOG CURRENT;
ALTER DATABASE OPEN ...;
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.Please help me to understand Caution -section
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
Rgds. -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
BRBACKUP fails with 'BR0301W SQL error -980 at location BrbDbLogOpen'
Hello mates,
BRBACKUP on our Portal systems fails with the following error:
EP Version: 600
Platform: HP-Unix (ia64 hp server rx7640)
Oracle: 920_64
BRTOOLS 6.40 (40)
BR0301W SQL error -980 at location BrbDbLogOpen
BR0324W Insertion of database log header failed
Here is the exerpt from the logfile:
==============================================
BR0051I BRBACKUP 6.40 (40)
BR0055I Start of database backup: bdyxzsml.anf 2008-10-01 08.04.51
BR0477I Oracle pfile /oracle/GGF/920_64/dbs/initGGF.ora created from spfile /oracle/GGF/920_64/dbs/spfileGGF.ora
BR0925I Public synonym SAP_SDBAH created successfully for table SAPGGFDB.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPGGFDB.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPGGFDB.MLICHECK
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrbDbLogOpen-5
ORA-00980: synonym translation is no longer valid
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0319I Control file copy created: /oracle/GGF/sapbackup/cntrlGGF.dbf 8052736
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrDbfInfoGet-30
ORA-00980: synonym translation is no longer valid
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrDbfInfoGet-31
ORA-00980: synonym translation is no longer valid
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301E SQL error -980 at location BrComprDurGet-1
ORA-00980: synonym translation is no longer valid
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0301W SQL error -980 at location BrbDbLogOpen-5
ORA-00980: synonym translation is no longer valid
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdyxzsml.anf 2008-10-01 08.04.51
BR0280I BRBACKUP time stamp: 2008-10-01 08.04.51
BR0054I BRBACKUP terminated with errors
============================================
I am not able to find any relevant solutions in SMP so far.
Please help find a solution.
Thanks & Regards,
ManojHello ,
Am trying to take the online backup using brtools in my portal server but giving below error:
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdzqskqc.and 2009-01-08 17.44.50
BR0484I BRBACKUP log file: /oracle/EPP/sapbackup/bdzqskqc.and
BR0477I Oracle pfile /oracle/EPP/102_64/dbs/initEPP.ora created from spfile /oracle/EPP/102_64/dbs/spfileEPP.ora
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
, ' ', 'bdzqskqc', '# 0 0 0 0 0 0 0 ALL online
disk ---k-c 7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0319I Control file copy created: /oracle/EPP/sapbackup/cntrlEPP.dbf 7397376
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrDbfInfoGet-32, SQL statement:
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrDbfInfoGet-33, SQL statement:
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301E SQL error -1031 at location BrComprDurGet-1, SQL statement:
'OPEN curs_6 CURSOR FOR'
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DC
OR FUNCT = 'DCM') ORDER BY FUNCT'
ORA-01031: insufficient privileges
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108174450', 'and', 'EPP', ' ', '99
, ' ', 'bdzqskqc', '7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdzqskqc.and 2009-01-08 17.44.50
BR0280I BRBACKUP time stamp: 2009-01-08 17.44.50
BR0054I BRBACKUP terminated with errors
Please suggest/guide
Regards,
AMS Team
Maybe you are looking for
-
I have tried to access the itunes store by many different means. I know I have account balance as I put in 2 gift cards back in March and have not used them all. I recently installed and uninstalled itunes several times but I still cannot open it o
-
I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096). I have removed both itunes and quicktime from my computer and re-installed them and I still get the same messa
-
If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when
-
How do I access the preset frames in Photoshop Elements 11?
I have been using Corel PaintShop Pro 14 and have switched to Photoshop Elements 11. It came with Preset frames for using on your photos. I wondered if Elements 11 has the same feature and if so how can I access them?
-
Lightroom starts every time i put in a memory card.
Lightroom starts every time i put in a memory card or a USB stick with photos. Is it possible to turn off this feature? I want to determine if the program should start.