Installation window (black background) consistently freezes solid at either 25% or 30% progress. Have tried all suggested means of sorting this (including uninstalling) several times. No joy. OS 10.10.2 Yosemite version. Any suggestions?
Installation window (black background) consistently freezes solid at either 25% or 30% progress. Have tried all suggested means of sorting this (including uninstalling) several times. No joy. OS 10.10.2 Yosemite version. Any suggestions?
I just found this....and it works....and it's legit.
1. Reboot computer or use Activity Monitor to force quit any prior Adobe Flash installation process that may be still running
2. Download Adobe Flash update using this link (assuming you are using Safari or Firefox): Flash Player for Safari and Firefox - NPAPI
3. Mount flash player by clicking on flash drive icon on desktop
4. Right click on Flash file
5. Choose 'Show Package Contents'
6. Open 'Contents' then 'Resources'
7. Run file 'Adobe Flash Player.pkg'
8. Reboot computer.
Similar Messages
-
MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!
Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again
-
my apple tv 1st generation appears to have locked up. it constantly now displays only a black screen.No function reset etc from remote use.The led status is constantly blinking orange. I have tried all the manual tips etc but still blank. Any ideas anyone?
Gary.Same/similar thing just happened to me....two days ago or so. Ran fine for months since going from wifi (major problems) to ethernet now.
I hadn't been on atv 1 for a few days and had it powered down. Turned it on and it ran thru the startup video/sequence then did the ole sit on a black screen where you can hear the remote responses (say, if i hit left on the remote - the 'option not available' doink noise is made instead of the usual sound you'd get if you were moving to the left on the menu.....not sure if that description makes sense?
The 'exit' or moving out of a menu 'noise' does sound, as does the enter/moving into a menu noise.
This has happened in the past, but more when i had it set up via wi fi.
Thing is this time i left it sit on the black screen while reading the paper, and after about 5 minutes, the menu screen finally showed up. Everything was really sluggish to start - but it was there. But, then, i reset it to see if the sluggishness would go away, and back to the black screen after the startup video.....and then 5 minutes later, it came up.
Not sure what is going on...but did have the blinking orange light for a while during the issue.
Don't think its an age thing as it did this even when i first purchased it....
Once into a video or music it runs fine (though i did notice that every once in a while with the music playing from my itunes, it would have a second of silence mid song like it paused for a second, and then would resume as if nothing happened.....
Any ideas whats shaking with this? Does this sound similar to your issue or am i in a different ball park. -
my macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Also, no sound comes out of my Macbook. I only hear with earbuds or headphones. Any suggestions?
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "Previous Shutdown" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that. -
One of the websites I use gives me this message:
Alternate HTML content should be placed here. This content requires the Adobe Flash Player. Get Flash
I have tried installing the Flash player several times, but I keep having this same problem.Can't see your Installed Plugins under More system details...
Did you install the correct version of Flash? <br />
IE uses a different version of Flash - ActiveX - than other browsers need - the Plugin version.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop. -
When I try to open or access some features of these apps, I get the
loading sign, then the screen turns black, and it takes me to my Home screen. Sometimes this also occurs when opening links in Facebook and Safari, and some of my Apps are completely useless as a result of this. I have rebooted thrice, re-downloaded the apps, and tried clearing them from the queue, nothing works. Also, I have noticed that the background of the home screen is oriented incorrectly at times, (background is portrait whilst the rest of the screen is landscape) and I'm really at a loss. I assume it's a glitch with iOS 7.1.1... The iPad is a 4th generation and has shown no problems until recently, around when I updated. I'm not jail broken or anything, but my Wal-Mart warranty has expired. What should I do?IMO, you answered your own question with your lead in about backing up, erasing the device and restoring from the backup. That's what I would try next.
If that doesn't work, I would backup with iTunes, and restore the iOS again using iTunes. You can't restore the iOS by simply erasing the device. You have to use iTunes in order to reinstall the iOS.
iCloud: Restore your iOS device from iCloud - Apple Support
Use iTunes to restore your iOS device to factory settings -
Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.shaminsharaf wrote:
Hi guys,
I find diffficulty downloading applications from appstore to my fone directl
Each and every time it shows " ERROR 1004 "
Cant understand what to be done.
I think this is your fix...
http://support.apple.com/kb/TS1275 -
I have trying for ages to download itunes 10.3 to my laptop(windows vista 34bit) it starts downloading but at the point every time it freezes and doesn't finish installing. I have tried all sorts of suggestions but nothing doing. Anyone got any idea's. IPhone and IPod touch no good without it
Windows 64bit download: http://support.apple.com/kb/DL1615
-
I've tried to download flash player several times onto my iMac, but still can't run any videos.
I have tried downloading and installing Flash Player on my iMac several times. It goes all the way through the finish screen, but I still can't view videos. I still get a flyout that says I need Flash Player. I cannot find Flah Player anywhere on my iMac. I have looked under Applications, Devices, Documents, and even Utilities. Nothing. I do find the installer program, but it only wants to uninstall a Flash Player program that doesn't exist. Any ideas as to what is going on?
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf -
When I using the mouse to select portion of the diagram or the panel, or when I moving objects- I found that in all the vi's that I compiled from former versions of labview- there is a delay of close to a second to the actual selection or movement of the item. This happens in 2 machines out of 5 that I tested it, and it happened both in windows 2000 and in windows 98. any suggestions?
Sometimes a video driver issue. Update your video driver.
Or turn down the video driver hardware acceleration. Right-click an
empty area of the desktop, choose the Settings tab, choose the Advanced
button.
The location of this differs in different versions of Windows.
Win2000: go to Troubleshooting, and turn down the slider for hardware
acceleration.
Win98: I think it's on another tab.
Mark
ilan wrote:
>
> Delayed response of when moving objects in diagram and panel, happend
> in LV 6, only for vi's compiled from previous versions. any
> suggestions?
>
> When I using the mouse to select portion of the diagram or the panel,
> or when I moving objects- I found that in all the vi's that I compiled
> from former versions of labview- there is a delay
of close to a second
> to the actual selection or movement of the item. This happens in 2
> machines out of 5 that I tested it, and it happened both in windows
> 2000 and in windows 98. any suggestions? -
I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?
This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
I know this sounds weird, but it has worked for me about 80% of the time. -
i have a HP laptop, when i try to do certain things that require flash player it tells me i need to install the latest version so when i try it says its already installed. i have tried all the trouble shooting suggestions and it stll isnt working. I even checked the activex filtering and that doesn't seem to be the problem.
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?
My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?
Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M. -
I am interested in purchasing a new PC and wanted to transfer all of the music on my Itunes onto my new computer's Itunes the easiest was possible. Any suggestions?
These are two possible approaches that should work to move the existing library to the new laptop.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Should you be in the unfortunate position where you are no longer able to access your library or a backup of it then see Recover your iTunes library from your iPod or iOS device.
tt2
Maybe you are looking for
-
I cannot compile the following program which calls for another 6 class files from its code. Please note the main program (DiveLog.java)+the other 6 class files are stored in the same directory. And also as this involves "package" I tried to compile i
-
Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access
Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access I have had problems of hotsyncing my Palm T3 to my windows 7, 64 bit, laptop ever since I bought the laptop. I've read many posts and followed various instructions to no avail. But, I've d
-
Every effect must be rendered?
Been combing the forums for some time looking for an answer. I've captured about 10 mins of HD footage from my HDR-FX7. I can drop my clips right in the time line with no rendering needed; however, any effect added needs to be rendered, even somethin
-
I forgot my iTunes security questions and my ipad password
I accidentally hit a wrong number I guess when making my password and I don't know what I hit. Please help me! And I can't plug it to iTunes
-
Hi Friends, we have a requirement in that we need to know the corresponding tables for invoice verification, i have gone through with the following tables BKPF,BSEG,RSEG,MSEG AND MKPF, i am getting confusion while selecting the corresponding table fo