Installed 11.2 but getting prompts to install again

So i was prompted to download the newest adobe flash player - 11.2 so i can watch youtube and see the things i'm putting on there. But now i keep getting prompted to install this - EVEN though the installation fails because i already have it installed. Why does the internet services keep blocking me from watching the videos on youtube and interacting on other sites, even though i have the version of flash player installed!?

I have the same problem. I just installed the latest Version a few minutes ago. It tells me that it is installed and running, but when I get to the Jacqui Lawson website to look at the e-cards, I am prompted to download the latest version of the Flashplayer again. I run Win 7, 64-bit, with IE 9. Does it have something to do with the 64-bit?? I was able to preview the cards until a few weeks ago. Helga

Similar Messages

Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
1) After starting up, I get the usual gray screen with Apple logo.
2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
3) I follow this instruction, but get the same dialogue box over and over agin.
Any ideas?
Thanks and best wishes.

If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Bluetooth keys recognised but get prompt for wired mouse??

I have a G5 10.4.11 and finally got my wireless Apple keyboard recognised by typing the code prompt fine.
I use a WIRED mouse at the moment, and everytime I turn on, I get a prompt for setting up a BLUETOOTH mouse?? when i already have a wired one plugged in?!
How can I disable this prompt so that it uses a wireless keyboard and WIRED mouse ok?
I have to unplug and plug in my usb mouse cable for it to go away!!

Hello pitch:
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Also, reset the PRAM:
http://support.apple.com/kb/HT1379
Barry

Successfully installed Lync 2013 via Click-to-Run, but getting "Choose your product" prompt

After installing Lync 2013 client using method
Click-to-Run "Deploy Office 365 ProPlus from an on-premises location",downloaded Office source is on local hard drive with the
"config.xml" shown below.
I'm getting "Choose your Product" prompt after signing-in. We have Office 365 Enterprise E3 plan and we just wanted to upgrade Lync 2010 to Lync 2013 (not the Basic).
<Configuration>
<Add SourcePath="E:\Temp" OfficeClientEdition="32" >
    <Product ID="LyncRetail">
      <Language ID="en-us" />
    </Product>

</Add>
<Display Level="NONE" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="E:\Temp" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
Though Lync will continue to work when you close the window. I need to deploy the full 2013 client to several
machines locally.
Thanks.

Hello,
Looks like you‘ve tried a hybrid deployment with Lync 2010 and 2013, right? This might be the reason why Lync 2013 keep prompting to choose your product. Lync 2013 will automatically identify the products that it found for your account which you used to
login Lync 2013.
So, please try to remove any earlier version (Better to remove all Office 2010 suite) on your computer and try a fresh installation again. Let’s see the "Choose your product" prompt would appear again.

I keep getting prompted to instal Reader and sign the agreement. But it is already installed.

When I try to use Reader in one application I keep getting prompted to install Reader and sign the agreement, even though it is already installed.

Have you accepted the EULA? How this is done depends on your platform, which we don't know.

Adobe Reader update 11.0.09 Broke my mouse magnifier. I uninstalled but now I get prompts to install. How do I get rid of the prompts?

My gawd this site is the most ridiculously difficult site I've ever seen. Round and round we go and where we stop nobody knows. Will someone please tell me how to make the prompt for Adobe Reader update 11.0.09 go away?? It already shows that number was d/l'd in Sept. 2014. I d/l'd it the other day and it broke the magnifier on my microsoft 5000 mouse. I use that a LOT. I can't lose it. I uninstalled the update and now I get prompts continuously. What to do?

Thank you I will try that. Why am I being prompted to d/l an old update? I didn't even know there was a more recent one.

Attempting to install Flash plugin 11.4 but getting error: application currently in use

I try to get a support in the Adobe forum. While I am waiting for any responses, I might as well look for the same here. Maybe someone have an idea.
Last night, my Firefox 16.0.2 prompted sites like Youtube to upgrade my Flash Player. First attempt at installation was successful (if I remember it), but somehow Firefox slowed down at confirmation. So, I try to uninstall and reinstall Flash Player. Yes, I did complete uninstallation. Any subsequent attempts led to error: application currently in use.
Earlier today, I resetted my Firefox browser. First attempt at another installation was successful, but the browser seemed to hang or slow down for a while until the Flash confirmation page showed up. I thought for sometime, everything went fine. It did not when I was having trouble watching flash player content from a site. I figured I better uninstall and reinstall it again. Here I go again with the error message like the above.
Any idea what I should do next or how should fix this? Any input is appreciated. I'm using Windows 7

Please restart you computer after the uninstall then try installing again.
Thanks!

I am trying to download and install adobe reader, but it is not working. Everytime I try, I get the download but when I try to install it, it goes somewhere but not on my screen for me to install. If I try to install again, it says only one copy can be in

I am trying to download Adobe Reader, I have Windows 7 on my PC. Every time I get the download, I click on it to install the program, and I get the usual messages but I never get the install message. When I try the download again, I get a message telling me only one copy of the program can go on the computer. When I check the program list, it is not there. I have to restore my computer before I can attempt the download and install again. I have tried this at least 6 times but cannot install Adobe Reader. Please help me out with this. I really like this product and prefer to use it. I had o originally delete the program, due to an update conflict.
Linda Eaton

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Bootcamp - I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

You posted your Bootcamp question in the Macbook Pro forum. Your question has been asked and answered many times in the Bootcamp forum. https://discussions.apple.com/community/windows_software/boot_camp
When you post in the Bootcamp forum include the complete and exact error message.

I'm trying to install iOS 5.0 but getting message that my computer does not have sufficient space to backup my iPad; continuing will result in loss of all media on iPad. I was going to install iCloud but it seems that you have to have iOS 5.0, help?

i'm trying to install iOS 5.0 but getting message that my computer does not have enough space to backup my iPad and continuing will result in loss of all media on iPad. an option seemed to be backing up on iCloud, but i think you have to have iOS 5.0 to install iCloud.
how do i install iOS 5.0 without losing anything on my iPad?

If you really do not have enough space on your HDD for a backup of your iPad, you do not have enough space at all. Free up at least 15% of your HDD, in any case more than 0.8GB for the iPad update.
Make backups on an external disk.
After freeing up enough space, try again.

Trying to install Lightroom 5 with CC but getting error code 5 on initial startup of Lightroom.

Trying to install Lightroom 5 with CC but getting error code 5 on initial startup of Lightroom. Have uninstalled all adobe products including Creative Cloud CC.
Followed the instructions on the forum by using the CC Cleaner App for OSX. Have restarted a number of times and even tried using disk utility to fix any permission probs. Still no luck.
The problem started happening from upgrading the previous version of Lightroom to the most up to date version. Im hoping someone can help me with any ideas. Thanks heaps.

Ended up fixing the problem after finding no answers. Deleted the following file
com.adobe.acc.AdobeCreativeCloud.plist

I am changing laptops and have tried to download and install Acobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

I am changing laptops and have tried to download and install Acrobat 9 Standard from the Adobe website, but get message that my serial number is invalid. I log in and double check my account and it shows as a valid serial number. Now what?

If you had it on a laptop that crashed and you threw away, it is still considered as activated on that machine. YOu should contact Adobe by chat or by phone and have them deactivate for you.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/
If you are getting a message that indicates the serial number is not valid, you should look thru the following:
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

See #Q1 in Using Time Machine with a Time Capsule.
If you have a problem, please tell us exactly what, and on which step there.

I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Installed 11.2 but getting prompts to install again

Similar Messages

Maybe you are looking for