Installed PCI-6025E recognized by Windows XP but only in PXI system by MAX

I installed a PCI-6025E DAQ board on a Windows XP machine. Upon startup it recognized the new hardware and installed the driver from the NI-DAQ 6.9.3 CD. All seemed to work fine. When I try to bring up the device in MAX it only shows up in the PXI system section. This doesn't assign a device number or allow a test panel. So I don't know how to access the signal from Labview programs. Is there something I haven't done right?

Hello magicjoecuda,
In general it sounds like you have done everything right and it is not that surprising that the 6025E shows up as a PXI device, but it is unexpected that it does nost appear as a DAQ device. I would try 2 things to work around this:
1) Try installing the card in a different PCI slot on the computer.
2) Uninstall the 6.9.3 driver and try installing the newest version of the driver. A link to the newest version of the driver for your board can be found here:
http://www.ni.com/support/daq/versions_pci_pxi.htm
Take care,
E.Lee
Eric
DE For Life!

Similar Messages

IPhone not recognized on Windows 7 but recognized on iTunes

I follow all the steps to make my iPhone recognized on iTunes.
But it is not recognized on Windows 7. It don't appears on My Computer, and it does not ask for install driver when I plug it in.
It is very strange!
Sorry for my terrible english.
Please help me!

when we connect iPhone on windows 7, there is 2 device drivers it supose to install. One of then is called Aple iPhone and it is automaticaly installed by windows. I supose whe this is not listed is when we can't recognized the device on explorer, but in iTunes. Any sugestion to how do I install Apple iPhone icons mannually?

IPod is recognized in Windows XP but not iTunes

I just had my iPod mini replaced. When i connected it to my computer, it said "New Hardware Found" and recognized the iPod as an iPod. However, when I went into iTunes, it wasn't there, and the iPod Software Updater is up-to-date and says, "no ipod connected."
Apple just replaced my last ipod for the same reason. This one is new and the same thing is happening.
Did this happen to anyone else? If so, how did you fix it?
Thanks!

Did you try these?
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
Try to restore it in disk mode.
Putting iPod into disk mode.

Imaqdx multiple cameras show as Local Area Connections in System tray, but only one shows up in MAX.

I have two GigE cameras (Pulnix 4200GE) in my system, each having it's own NI GigE Vision Adapter. The adapters show up in Network Connections and in the system tray as "Local Area Connection" (LAC) and "Local Area Connection 2" (LAC2). However, I can only see one camera at a time in MAX. If I start with both adapters disabled, then enable LAC followed by LAC2, I see one camera (cam0), then both (cam1 shows up) but about 6 seconds later the second camera (cam1) disappears! If I enable the adapters in the reverse order (LAC2 followed by LAC), only cam0 shows up. I can see each camera alone by disabling the other adapter but I cannot get them both to stick around.
There is also an anomoly in the MAX display of the cameras. If I right-click the camera in the NI-IMAQdx folder the context menu has a 'Camera->' sub-menu which shows both cameras even if one has had its adapter disabled. And regardless of which camera I see (cam0 or cam1) the list shows the same camera is checked. This is in conflict with the data showed in the Camera Information tab of the attributes pane in MAX, which shows a different camera (ID'd from the serial number) based upon which one shows up in the folder list. And changing the selection check-marked in the 'Camera->' sub-menu has no effect on the information displayed in the attributes pane.
I have followed the troubleshooting guide and they are both DHCP-enabled and have Auto private addressing enabled. I have updated the Adapter drivers. This is a NI PXI system running Win XP.
Thanks in advance for any help!
Jesse

If you are running Windows XP you need to go to the network settings tab in Windows and bridge the two "NI Gige Vision Adapter" ports together (select both, right click and select option to bridge network adapters). This is due to a deficiency in Windows XP where multiple adapters within the same logical subnet (the link local address space, in this case) are not able to be used independently for broadcast traffic. This workaround is not needed on Windows Vista or later.
The details you are seeing by right-clicking the camera in MAX is the list of camera files (saved settings) that can be associated with the camera. You probably have two because both were visible at one point or another to IMAQdx and so unique ones were created. They are probably both associated with the same camera file because if they are both the same model name we have some logic that assumes that if one is removed and a new one is attached, to use the previous camera file. This only happens in certain circumstances---normally if you start with one camera and add a second (or start with two) they will both get unique files created to store their settings. In your case you can use MAX to set the correct association as needed.
Eric

Same thing as others...Nano is recognized by Windows..but not Itunes

Clean install of windows (just replaced harddrive, mobo, ram, vidcard, powersupply etc). Installed itunes after everything else was done...and low and behold..it somehow remembered my podcasts (i'm assuming from my music library)...but itunes won't see my nano, nor will the ipod updater. I've spent the past 2 days going over the web and trying every fix (the 5r's, formatting the ipod, resetting the ipod, new usb ports, etc
Windows does see the device so I know USB is working and the cord is fine, This ipod is barely a month old (father's day gift), i can't even restore the nano since ipod updater won't see it (have the 6-28 one). I also tried resetting the nano..then hold select and play while the apple logo was up..but nothing happened.
Help please!

Ok...I did that to the Ipod, updated and restored. Then I removed itunes. Rebooted. changed all my drives (have 3) except for my main windows drive...rebooted again.
Then as soon as it came up and I plugged my ipod in...itunes went through the initial setup info for my ipod. Problem solved.
By changing drive names it forced Itunes to not rely on any old info sitting in the registry.
Kinda sloppy I know..but it worked.

TS1363 My Iphone is recognized by Windows XP, but ITunes doesn't "see" it?????

I am in ITunes, but my IPhone is not recognized as a device. However, WINDOWS XP does "see" it.
Thus, I cannot do a backup????

https://discussions.apple.com/message/18877238#18877238

Trying to install Premiere Elements 10 on Windows 7 but keep getting error message 'A reduced set of content has been installed' - help!

We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
Thank you!
Adobe Premiere Elements 10.0
Windows
2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)

cathyj
Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
http://www.adobe.com/special/premiereel/downloads/
We will be watching for your progress.
ATR

IPod Shuffle not recognized by windows 8 but is by Windows 7

iPod Shuffle not recognised by WIN 8 but is by WIN7
When connected via iTunes iPod Shuffle charge light does not come on and WIN8 Control Panel Hardware status indicates a problem with the iPod. WIN8 troubleshooting results in the following message:
Windows is uninstalling this device. (Code 21).
No such problems exist when iPod is connected in WIN7 via iTunes i.e. charge light came on and the device was recognised OK by WIN7Control Panel Hardware status.
Is there any fix to make WIN8 behave OK like WIN7 for iPod Shuffle?

first try reinstalling itunes on 8, also have all your files been moved over to win8 or maybe try restoring the shuffle

My iPhone 4 is not recognized by Windows 7 but syncs with iTunes.

Driver fails to load. Device manager considers my iPhone a MTP USB.
I have deleted and re-installed iTunes with no resolution.
I have read several strings regarding Autoplay. Nothing seems to work.

See this tip: http://support.apple.com/kb/HT1923. If you didn't use all of these steps to remove and reinstall iTunes you should do it this way. Note that the installation requires Administrator privileges to remove and install.
Also, if you are using a USB hub for the iPhone connection, try a USB port directly on the computer.

Firefox won't install for all users in Windows 8.1; only installs for administrator

Since moving to Windows 8.1, I have been unable to install Firefox for multiple users on this laptop. Firefox installs only for the Administrator (me), and does not appear on any other user account. When I try installing from one of the other user accounts (after entering my administrator password), it simply won't install.

Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

403 error on install (can't connect to Adobe servers) but only on some APPs

Photoshop, Illustrator, Indesign, Premiere, After Effects, Muse, Bridge,Edge Code, Edge Inspect, Edge Reflow, Fireworks all installed ok, but...
Edge Animate, Dreameweaver, Flash and others don't ... whats the difference?
I am behind a corporate firewall - but it would help if I knew why these APPs are failing, what do they need that the others obviously don't?
Cheers

Refer
http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/ControllingSvcAc cess.pdf
http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/ServiceAndSiteUR L_List.pdf

Problems with usb drivers on windows 7 but only for internet tethering using usb.

Something got mixed up and now my iphone 4 using ios5 cannot transfer internet connection to computer using usb port. I got yellow mark in computer managment on iphone icon. I tried all that: http://support.apple.com/kb/TS1538?viewlocale=en_US but it didnt help i does not want to update the driver that is located in that directory.

Hi.I did not have it installed, but have installed it now. Is this a possible cause of my problems with the USB drivers install? Thanks a lot!- IceSony

LaCie flash drive not recognized as a drive, but shows up in system profiler. Please help!!

I recently got a LaCie RuggedKey 16 gb flash drive. The problem is that recently I plugged in the drive and I can't access the files, however, it shows up in system profiler. There are still files on the drive, and I really need them. Can you please help me recover them?

If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed.

Installing LR 5 on my new mac, but only have upgrade serial number. How can I find my previous LR serial number?

I cannot find my previous version serial number. How can I locate?

Did you pass code locked it? If Find My iPhone is configured, you can do a remote wipe. Any way, go to the police and make a report, change your password in iTunes Store, really sorry, that's not much you could do. Is it authorize? If so you can deauthorize in iTunes when you select iTunes Sore under STORE (left panel) and click your Apple ID (top right)

HT1399 I've copied more than one CD into iTunes that had various artists; the result is the CD is not recognized as one item, but only as separate songs by multiple artists. Is there a way to combine those separate songs back into the original "album" in

My question is in the subject line. Don't know why I have to put info here? Isn't this seen as an answer?

From Song View, select all of the tracks, then hit Ctrl-I (Get Info). On the "Options" tab, change "Part of a compilation" to "Yes". Click "OK" to save.
For individual tracks, there is also a compilation checkbox at the bottom right of the Get Info "Info" tab.

Installed PCI-6025E recognized by Windows XP but only in PXI system by MAX

Similar Messages

Maybe you are looking for