Installed windows XP on Sun ULtra 40, networking on solaris stopped working
Hi,
The scenario is following. I have three separet hard drives. On one I have Solaris, on seconed one RHEL 4 and on third one Windows XP 64. The windows and third had drive have been installed last.
Before everything was working smoothly. I dual booted the OS I wanted (Solaris or Red Hat) and DHCP gave me IP addresses, no problem. After booting once to windows, the networking stopped working on Linux and on Solaris. Windows works OK. Has anyone else experiencd this? The network adapter is nVidia MCP55 and it is detected during the boot.
What an earth Windows is doing to NIC?... or to the DHCP server ...?
To ensure that the problem is not the combination Windows-DHCP Server I would assign a fixed (non-DHCP) address to the NIC under Linux and Solaris (later I would switch back to DHCP).
Another thing I would do is when the problem occurs I would use "snoop" to sniff the data going over the network card (you may use "ethereal" to visualize your "snoop" results but do not use "ethereal" on Solaris to capture packets - it does not work correctly).
Martin
Similar Messages
-
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Microsoft Windows. Adobe Flash Player 11.5 r502 has stopped working
downloaded latest update. Installation ot complete. Constantly getting this error message:
Microsoft Windows. Adobe Flash Player 11.5 r502 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
close program "Hi
Running Windows Vista 32-bit
Mozilla Firefox is my browser
Have removed everything Adobe related, that I can find. Tried re-installing, I get the download, click run and then nothing else happens . We don't get to step 4 User Account Control. Boxes on view my version / video are just grey. Anti Virus disabled.
we support: http://thanktheforces.com/
Date: Fri, 8 Feb 2013 01:15:05 -0800
From: [email protected]
To: [email protected]
Subject: Microsoft Windows. Adobe Flash Player 11.5 r502 has stopped working
Re: Microsoft Windows. Adobe Flash Player 11.5 r502 has stopped working
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
What is your Windows version? What is your web browser? What is your (full) Flash Player version? See http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html# main_Find_the_Flash_Player_version_installed_on_your_machine
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5057513#5057513
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5057513#5057513
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5057513#5057513. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I have Adobe Acrobat installed as part of the CS6 suite.
It has stopped working (yet again -- it has done that three of four times over the last year).
I have spent days trying to repair it; etc. without any success.
The last time this happened, it was necessary for someone from Adobe to reinstall it entirely, if I remember correctly.
I give up. Can anyone tell me what I must do get the program to actually work?
I spend more time trying to get Adobe Acrobat to work, than I do actually doing my work.
My OS is Windows 8.1. My system has 16 MB of RAM, and hard disks are not overfilled.
I run update virus checker (Kaspersky) daily.
Cheers,
HughHi Hugh ,
Could you please tell what are the challenges you are facing while trying to access Acrobat ?
Do you get any error message ?If yes ,please share the screen shot of the same.
Please try the solution outlined here: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
OR
Try repairing it from Control panel, or try launching it with a different user account and check if it works or not.
Install the latest updates for Acrobat X from the link : http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
and check.
Let us know how it goes,
Regards
Sukrit Dhingra -
Hp network communicator has stopped working message
hp network communicator has stopped working message appears all the time how do i get rid of it
Thank you SimonO,
This path, Control Panel > Review your Computer's Status > Maintenance > View Reliability History, helped me understand better. What I can not see in the screen shot is what the error message says.
Can you type out the information related to the HP printer errors. If they are not all the same maybe you could tell me a few of them.
I am curious as to what it says under Source, Summary, and Action.
I appreciate the screen shot but can not make out what it says. Do you get error messages any where else on the computer or the printer. Do you have any issues when using the printer?
Have you tried clicking on Check for solutions to all problems at the bottom of the reliability history? If so what happens, if not can you please try and let me know what happens?
Thanks, looking forward to hearing from you again.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
I'm unable to launch my newly installed PS CC. I got a message that Photoshop stopped working and the program closes?
Please read these and proceed accordingly:
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html -
FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit
You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link --- -
My network extender has stopped working...
My network extender has stopped working. The SYS light is a fast blinking red, and the GPS light is a solid red. I have unplugged both the unit and internet router multiple times to try to reset them. I did recently switch the account over from my wife's name to mine to receive a larger corporate discount. Not sure if that would have any effect or not.
No I haven't. I'm not quite sure how to do that. When I click on the plus sign next to the search bar on the My Verizon page, then click Manage Network Extender, it just takes me to the sales page of the extender.
Jody Suwalkowski, M.A., CES
Exercise Physiologist
Cardiovascular Clinical Associates -
I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.
Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.
-
Installed windows on mac but cant get buttons or drivers to work
well i have got a macbook pro late 2006 2.33ghz core 2 duo i installed windows 7 on it via boot camp but i cant fin dany drivers in mac osx lion in boot camp it has an option to download drivers but it says it cant find them on a server message so i a stuck i dont have any original disks with came ewith my macbook pro where can i download boot camp for windows
TheMacAndPcGuy wrote:
well i have got a macbook pro late 2006 2.33ghz core 2 duo i installed windows 7 on it via boot camp but i cant fin dany drivers in mac osx lion in boot camp it has an option to download drivers but it says it cant find them on a server message so i a stuck i dont have any original disks with came ewith my macbook pro where can i download boot camp for windows
From the download, just keep trying, it can take a while. -
iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylewHi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
Network printing has stopped working
Several years ago I connected my HP 6300 All-in-One to a wireless router. My workstation is hardwired to the printer. My laptop is connected via networking.
Everything worked perfectly until last week. Now I can only print from my workstation. I checked the printer sharing settings on both computers and they are set to be shared.
The printer has been acting pretty strange lately. After every printing it gives me a "paper jam" error, when there is no jam. The only way to clear it is to turn off the printer, pull out the paper, then turn the printer back on. When it comes up I put the paper back and it will be fine for the next print job. Then I have to do it all over again. This started to happen before the network printing stopped working.
Also, I have my HP software disk. I put it in my PC thinking I would try to reconfigure network printing again, but nothing happened. I double clicked on 'setup.exe' in the root directory and the system hung. I tried the disk on the laptop and couldn't even view the files in Explorer.
I'm running Windows XP on both computers. All Windows updates are current.
Any ideas would be much appreciated.Download and install the newer full featured software and drivers from the HP web site here. Now try.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1821125&cc=us&taskId=...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Windows 7 64bit and itunes 10.5 "itunes has stopped working"
itunes suddenly stopped working yesterday. I updated to the latest version. I started itunes and as it was opening and showing messages such as "reviewing library" and "genius starting", I received a message that said "itunes stopped working"...closing program. I tried removing itunes and re-installing....and same problem. I checked the problem reports in Windows 7 and this is what it said:
Description
Faulting Application Path: C:\Program Files (x86)\iTunes\iTunes.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.2.11
Application Timestamp: 4ee0844d
Fault Module Name: GNSDK_DSP.DLL
Fault Module Version: 1.9.5.45
Fault Module Timestamp: 4e8e3998
Exception Code: c0000094
Exception Offset: 002784cb
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID: 2736259677
Note: I tried running itunes in "itunes safe mode" (i.e. holding control-shift-itunes) at start up and itunes works fine.
What can I do to fix this issue? I am running Windows 7 (64 bit)I'm experiencing the same issue, but I was able to get itunes to run by turning off genius. I've heard that others had to turn off itunes Match as well. If you start up itunes while your computer is not connected to the Internet you shoulld be able to start itunes and then disable these items.
I'm trying to determine a root cause because I'd like to use genius. Stay tuned... -
Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"
Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
SvenWould you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread. -
Network magic connection stopped working last night
Really need help with this.
My network magic suddenly yesterday stopped working in that it cannot contact the network magic website. This leads it to conclude that the internet is down, even though the connection is fine. This happened on all three of my computers. My browsers (mozilla and explorer) cannot seem to connect to the network magic website either. A product re-install on one of the computers went fine, but the problem still persists, despite a re-boot. Examined the hosts file manually and there are no entries that might cause a problem. The computers use different service provides and a different router. All three are vista ultimate 64 bit with service pack 2 (recently installed), have spyware doctor, spybot, and live care for security tools (as well as network magic). The live care firewall has the correct permissions for network magic. The network magic platform service is running properly.
Of course I cannot contact the network magic support team as I cannot access the website - this does not appear to be a known problem (did a search).
PeterPeter,
Not only the Network Magic connection stopped, but if you try to connect with your Net2Go remote access website it's not there anymore. Not even if you try to connect with your computer that's hosting it.
As I understand it, when Cisco aquired Pure Networks they issued their last upgrade, and with it came the announcement that the latest version would no longer have the Net2Go feature. Indeed, they could choose to END Net2Go at their discretion. It would seem that this is the case. A shame, really. My clients have come to depend on being able to retrieve their material and email links to their clients as well. All Cisco had to do was provide a redirect, how much server power can that take up anyway? It was almost like having a web site, and it cost nothing. Sure was nice.
According to the End-Of-Life protocols as laid out by Cisco, they're supposed to give warning when there's a system they would no longer support, and they are supposed to get with you to help you ease into the replacement technology and give you several months to do so. Slamming the door wasn't supposed to be part of it.
So now we have to either go without because nobody offers anything remotely like it (I checked), or we can all get domain names and pay for web sites and hosting. Thanks a lot, Cisco.
Maybe you are looking for
-
Im trying to track my repair I sent my ipod nano a month ago and I want to know if its fixed?
Im trying to track my repair. I sent my ipod nano in for repairs a month ago and I want to know if it was fixed and when I will get it back?
-
i updated my phone and it deleted everything even the factory apps how do i get them back
-
Horizontal scroll bar for each page of the ADF page???
Hi Everyone, I have developed one ADF page which is working very fine. The width and height of the page is more by which it is showing vertical scroll bar and horzontal scroll bar at the end(bottom) of the page. But the requirement is that the horzon
-
I had to start my computer with the disc. I elected to reinstall everything and had my old files put in a previous system folder. First I couldn't open itunes because it was a older version. then i copied it from the previous system folder. Then
-
Can anyone tell me is there any truth behind this rumour from the amdforums: http://www.amdforums.com/showindex.php?s=9b7768596eb912702f764e06ce763833&threadid=171700 Please tell me it's true....anyone? 8o