Installer with specific drivers
Hello to everyone,
I'm trying to build a installer for a measurement program I just wrote, wich only contians specific drivers for my hardware and LabVIEW runtime.
My goal is to find a solution without installing the whole NI-DAQmx 9.6. The solution should be as small as possible and not about 1,3GB plus the space for runtime. Is there generally a solution?
Does anybody has got experiences with this?
Thanks a lot!
You can always add a kudo here: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/LabVIEW-App-Builder-Should-Determine-and-Minimize-Dist...
Might help, might not.
Using LabVIEW: 7.1.1, 8.5.1 & 2013
Similar Messages
-
Hello all,
I'm wondering if someone can help me out with how drivers and all are treated with applications distributed with App Builder, used to create a stand alone, full install of app and labview engine with Installer.
What has happened is, my application was created using the NI branded USB to RS232...and USB to RS485, and they work great.
On the application when running..you fire it up, it finds the USB to serial device, and I have a dropdown that finds the available COM ports to use (along with setting parity, etc).
I've installed on different computers (without previous labview installs) with the installer. They all worked.
The customer has received the installer....and despite us telling them to use the NI branded USB/Serial interfaces..they are trying to work with a different USB/serial cable.
They say the COM ports aren't even showing up when they run the installed application.
So, I'm not sure where to start. Is this a driver issue? Does the App Builder Installer...install the drivers for the interfaces I was using with it? Is there a way for the person to find and install a driver on their own...or would I have to somehow find out a driver for what they use....then, basically redo the App Builder Installer build...to include that driver with the executable I send back out?
I guess I basically need a better understanding of how drivers for external access/communications are handled when you use App Builder to create a stand alone application complete with the labview runtime engine...and nothing else.
Thank you in advance,
cayenneThe main thing is that LV uses VISA to talk to serial port whether native on the machine or from USB dongles that you plug into the computer. It sounds to me like their dongles aren't working.
Can the customer see the ports in the Windows Device Manager? Can they access them through something like hyperterminal? How does your program find the USB/Serial devices?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Troubles with graphic drivers installation
Hi! I need some help with installation of graphic drivers on pavillion g7-1078sr, win7-x86. After installation of Intel turbo boost technology driver (sp55027, downloaded from here) in device manager, in videoadapters i still see Standart VGA Graphic Adapter(VEN_8086&DEV_0046 = core i3 integrated video) instead of Intel HD. Why drivers are not installed?
And second trouble. Installation of ati graphic driver(sp55025) says that's all is OK, but i can't launch control center and i can't see my graphic card in device list, i see only standart adapters. (.net Framework 4.0 installed) Here is the screenshot of trouble http://s011.radikal.ru/i317/1206/e3/0de594a696ab.png
Help me please, cause i can't use my notebook normally. This is abnormal situation with the drivers.
This question was solved.
View Solution.Hi,
Try downloading and installing the following drivers.
First, open windows Control Panel, open Programs and Features, right click the Intel Turbo Boost Technology driver and select Uninstall - when this has completed, restart the notebook.
Next, download and reinstall the Chipset driver on the following link.
Chipset Driver.
After this installation has completed, restart the notebook.
When windows has reloaded, download and install the driver on the link below.
ATI/Intel Installer.
Again, when this installation has completed, restart the notebook again and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Can't install printer on Windows 8.1 with downloaded drivers
Strange problem. I cannot install a printer to a windows 8.1 tablet using either downloaded drivers specific to this printer or with universal drivers. The printer installation hangs after I enter the port, and it hangs at "installing printer" Now if I use auto detect, it installs without a problem. The problem with that is we have specific settings that need to be set that are not available with the native detected drivers. It acts like it will install, because if I refresh the screen on devices and printers, it shows. If I then go to printer properties, in the case of the universal drivers, it will not find the printer. It gives the universal drivers printer search page. I have admin privledgesI am installing via remote desktop because they are at remote locations.I have the firewall disabled.Is there something I am missing? I did use pnputil -a *.inf
Hey Andrade2691,
Please refer this kb file and try troubleshooting update installation issue for Windows 8:
Error 1321 or 1309 | Install | CS4, CS5, CS5.5 | Windows
Regards,
Anubha -
executable and on the target machine I can run that if I previously installed NI-CAN 2.7.3 from the support download of NI.com.
Now I wanted to build an installer, that would automatically install the NI-CAN together with all the other drivers, runtimes etc. I do fail again and again when I tick that "other installers NI-CAN 2.7.3" box in the installer properties set.
The error that shows up hints to strange failing items, that I never had installed, like LV 2009 Runtime and alike. Some of them I downloaded from that S-l-o-w- NI Download site and installed it. It helped, but then came the next error. Now I stand here with the next (see shot). I never installed any MeasurementStudio, so why ist it trying to resolve anything from there.
It is really annyoing and humilating to tell the customer: here is an extra installer, make sure to run it before you do our stuff.
Isn't there any NI-CAN just for the tiny little LV 2011?
I'll live on if I get no answer, but maybe there is more knowledge around somewhere.
Gabi
7.1 -- 2013
CLA
Attachments:
NI-CAN Install.jpg 26 KBThank you Michael for your response.
Yes you are correct, the project was orginally set up in LV 2010 but converted for the "promised higher stability" to 2011.
I have not since touched the installer again, so I cannot be sure if a new one would help?
What do you mean by " a new build specification in a new directory" ?
I would certainly not want to create a new project from scratch (2) and re-invent all the internal structures.
I do have encountered problems with upgraded build files.
I am currently re-working two old projects one 8.5, the other 8.6 (migrated from the 8.5)
Therea are a lot of errors there as well. One was the inculsion of the "Variable manager" . Already since 8.6 it no longer exists and is currently a version of "Distributed SystemManager". Still, you can include the old version. But it will confilct with lots of other modules. Same is true if you try to include MAX 4.7 together with other drivers.
So you are right, you must create a new Installer build. So please could you please be specific about the directory.
Thanks again.
Gabi
7.1 -- 2013
CLA -
Installed 8.5 and now I can't build an installer with 8.0
I've been using 8.0 to write some applications. We have the professional development system contract or whatever with NI providing upgrades. Our IT dept came and installed 8.5 on my computer. I used it for a short while, then went back to 8.0. I have not un-installed 8.5. I'm now experencing problems building an installer with 8.0. I get the message box that it is "unable to locate the installer source for NI Labview 8.5 distribution" and a default D drive for the original CDs which I don't have. I do have the original 8.0 CD's and mainly for that reason want to continue to use 8.0. In the build process I am using additional installers for datasocket and visa 4.2. If I uncheck them the install process will complete. Is there someway for me to force my installer builder to use the 8.0 files instead of 8.5? Could I do this by un-installing 8.5? I re-installed 8.0 hoping that would help but it did not. I searched for this problem and found several earlier postings concerning this problem but none specific to this particular issue. thanks for any advice, Mike
Thanks for the input centerbolt. What a pain huh? I'll have to think about if I want to do all that for a while While I have administrative rights on my pc, the IS dept. is so paranoid what people might do I'm uncertain of restrictions that might stop me part way through and then be unable to recover or something. I like LV a lot but not real happy with the build processes for compiling programs and installs. If I copy the LV CDs to my C drive and then do the installation from there rather than the CD drive, will the program installer quick defaulting to the D drive for unfound drivers? Does that make sense? Anyway, thanks again.
-
Vista installation of P1505n drivers
Hello, i am having problem with installation of drivers , on to Vista Business. The installation,starts but when the printer is connected to the machine, nothing happens (the Vista recognises the printer as "unknown device" ), and installation hangs.... I tried all possible ways of installation,whit all drivers.Printer is 100% working, because i tested it, on other Vista machines, it just wont recognise on this particular one.
bump for eventual awesome replies
-
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala -
Hi,
I just want to know if bootcamp allready supports windows 8 with all drivers working like magic mouse gestures, the optic drive, sd card, USB ports, bluetooth al patches are working fine and if all is working ok how to intall, if is a normal bootcamp installation or requires other procedure
Thank youThe Windows 7 drivers worked perfectly for me on my Early-2011 Core i5 MBP.
It's not officially supported by Apple yet as it's pre-release software, but you can install it without any problems. -
SAP R-3 IDES 4.71 installation with Oracle9i
Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting... -
Notebook NC6400 HSTNN-C18C problem with grafic drivers
hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for helpHi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Can Packagemaker create installer with content files outside the bundle?
I'm trying to create an installer with Packagemaker, but the content files need to be outside the final bundle because they're shared with a Windows installer.
I thought I could create a symbolic link to the external folder, but instead of linking from the installer, it copied the files into the bundle. Any idea how to do this, or if it's even possible? I need to be able to do this on 10.3+, if that's relevant.
(I can give a more specific scenario if this isn't clear enough)
Thanks!zekel wrote:
The main issue I'd be worried about is that the external files (which are quite large) won't have the appropriate progress bar. The external files are around 1GB, while the internal files are in the 30MB range.
How about installing a secondary installer with progress bar that copies these files from the correct location. Your postflight script can just kick off the newly installed file copier.
How's this sound for a hack...
Have a launcher script copy the installer to /tmp, then modify the package to point my files. (I'm installing from read-only media.) It would then open the modified installer which would pull my files from the DVD. This would probably work better (read: at all) if the files aren't compressed inside the package. Do you know if that's an option?
No, sorry. The internals of a package are quite specific. You need PackageMaker itself to build them.
Things like the receipts are non-essential at this point, only because if I can't get this to work then we will continue to use our terrible installer which leaves none of those things. Those shouldn't be too much trouble if I can get the rest to work.
There are some 3rd party installers like Installer VISE. The sad part is that they tend to make the MacOS X Installer look good.
If the guy responsible for that is interested I'll show him Inno Setup, but we have a working Windows installer, so he probably won't want to mess with it.
I agree, but tell him about it anyway. The next time you have to build a Windows installer, he could use Inno Setup and get it done in a couple of hours and then have time to help with the mess that is software deployment on MacOS X. -
Mac-specific drivers and other software for Windows
Mac-specific drivers and other software for Windows how can I download them with out the install cd?
Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work. -
Problem in building an Eclipse installation with oomph
Hallo,
I am setting up an Eclipse distribution with several plugins needed to have a proper IDE for an Eclipse Project (GEF).
When adding the plugins to Eclipse everything is Ok, until I install the Oomph Version Management Tool plugin.
After installing the Oomph VMT Plugin, from the next startup I see the below error:
Plugins contained in the Eclipse distribution.
As specified in the GEF contributor guide, the GEF-IDE consists of
Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
Oomph Version Management Tool, from Oomph update site
After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
An internal error occurred during: "Setup check".
USER_HOME
I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see bug 473599.
Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core , but only for a small "delta"
I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the bug 473599.
So, I have two questions:
how to perform a Complete IDE Update ?
how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
Thank you very much for the time you're spending on my question.
I hope my question does not seem impolite or excessively complex.
Regards.Hi Patrik,
The p2f file that you mentioned in https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599 seems totally useless to me. It
locks in specific versions of the listed IUs, no matter whether the identified repositories will provide those versions
in the future or not. For example:
<iu id='org.eclipse.oomph.setup.feature.group' name='Oomph Setup' version='1.2.0.v20150720-0925'>
<repositories size='2'>
<repository location='http://download.eclipse.org/oomph/updates'/>
<repository location='http://download.eclipse.org/oomph/updates/latest'/>
</repositories>
</iu>
A P2Director task in an Oomph setup model for GEF seems like a better alternative.
More comments below...
Cheers
/Eike
http://www.esc-net.de
http://thegordian.blogspot.com
http://twitter.com/eikestepper
Am 27.07.2015 um 22:44 schrieb Patrik Suzzi:
> Hallo,
>
> I am trying to build a complex eclipse installation needed for development of the Eclipse GEF project.
>
>
>
> As specified in the GEF contributor guide, the GEF-IDE consists of
>
> Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
> API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
> e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
> m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
> Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
> Oomph Version Management Tool, from http://download.eclipse.org/oomph/updates
>
>
> During the installation everything is Ok, until I install the last plugin: the Oomph Version Management Tool.
>
> After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
>
> An internal error occurred during: "Setup check".
> USER_HOME
>
>
>
> I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core .
>
>
>
> I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> So, I have two questions:
>
>
> how to perform a Complete IDE Update ?
I'm not 100% sure but I think you can't easily get out of this inconsistent state because the plugins that would do that
for you are also impacted. I would recommend that you create a new installation with Oomph's Eclipse Installer.
> how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
I would suggest that you put pressure on the GEF people to provide a GEF project setup model, so that you can just add
it to your install.
Maybe you are looking for
-
Ipod mini opens auto run, not in itunes
I have he problem that the ipod mini opens as a storage device G-drive, not in itunes, and the autoplay box opens up but does not allow you to choose itunes. To make it open in itunes I often have to restart my computer, open itunes then it opens. Th
-
Archive logs are not transferred to STDBY database
Hi, I have create a STDBY database (I am running the release 9.2.0.7.0). I see that the archivelogs are not correctly transferred into STDBY server. From Primary alert log, I see the following error: ARC1: Evaluating archive log 1 thread 1 sequence 1
-
Dropdown in tableview iterator doesn't show values
Hi everybody; I'm new to BSP. I'm creating a small BSP MVC application. I have a table with a few columns; I needed to add an extra column in which a dropdown would be shown. I created an iterator class and implemented the following in the GET_COLUMN
-
Killing child process, not just the shell
Killing child process, not just the shell #241 - 07/11/03 11:30 AM Edit post Edit Reply to this post Reply Reply to this post Quote Hi, I am working on a system for automatically testing student submissions on an introductory course about unix script
-
Dear expert gurus , i would like to know how sap system controls the level of risks in risk management (High/Medium/Low). and also where to do the settings to block the order when the risk is High. Thank you very much.......