Installing a new gateway

In our current portal configuration we have the portal server running on one machine and the gateway on another. We want to move the gateway onto the same system as the portal server. So the easist way to do this seems to be to add a new gateway.
Here is a link to the documentation on how to add a gateway: http://docs.iplanet.com/docs/manuals/portal/30/ag/addgws.htm#1006059
If I follow this then will the portal server automtically install the new gateway? Or do I need to run the ipsinstall command and install a new gateway on the same machine as the portal server before I do what the above doc says?

You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
Then make sure to restart the gateway and server.
HTH ..

Similar Messages

What issues we may face in installing a new Prod portal with same SID as existing one

Hello All -
We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
2) Can't add two hosts with same name in DNS Server
3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
Then make sure to restart the gateway and server.
HTH ..

Installing WRTN300N as gateway

I'm having two wireless devices HALCYON make, installed into to deferent locations, one as access point and the 2nd as client, both are working fine but recently I came to know that the client mode only support 16 Ethernet connection at the same time
So I purchased WRT300N routers to install it between the Ethernets and the HALCYON (clients), so all users will go thru the routers and HALCYON can see only the internet port on the router.
Unfortunately if I connect the cable which is coming from the HALCYON to the internet port (WRT300N), I can't ping HALCYON
Please advice

You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
Then make sure to restart the gateway and server.
HTH ..

My HP Color LaserJet 3600n won't install on new laptop running internet explorer 11 windows 8

HP3600n was installed on old Gateway desktop and was accessed wirelessly from Dell laptop with Windows XP.
I purchased new Lenovo laptop with internet explorer 11, Windows 8.1.
I am unable to access HP3600n wirelessly for some reason. I tried to install software on new Lenovo laptop from original install disk but get error msg that it needs IE 5.0 or greater to install. I have IE 11, what is wrong?

Take a look at this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

New gateway, can't print

I asked cable company to increase my wireless performance at home. They sent out a technician who installed a new modem/router (gateway?). He was in-and-out quickly, but the new SSID and password were ridiculous, so I figured out how to change the name and password to something meaningful. I've got my PC and mobile devices all seeing the new gateway, but now my wireless printer isn't connected. I've lost the hard line to connect PC/printer - - I think if I had that, I'd be able to figure this out. Appreciate the help.
Windows 7, HP J10 3050, Motorola SBG6850

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Blinking yellow light after installing a new modem

I installed a new Arris DOCSIS 3.0 Gateways modem and my Airport Extreme AC keeps blinking yellow .
I have rest the extreme and still the same result. All connections are solid. It would be my opinion the Aiirport is just not finding the Mode,
thanks for any help.
M

I have rest the extreme and still the same result.
If you reset the AirPort Extreme, then you have had to set it up again.
I suggest that you try letting AirPort Utility tell you why the AirPort Extreme is complaining, and then let the utility offer a solution to fix the issue.
If this sounds like something that would be useful, then.....
Open Finder > Applications > Utilities > AirPort Utility
Click directly on the amber dot
Look for a listing for Status
Click on the smaller amber dot next to Status
Another window will open up with information about what AirPort Utility feels might be an issue, along with a suggestion to fix things.
If you are unable to fix the issue using that information, please post back with the exact message that you see.

Error in installing a new Repository in OWB 10g Release 2

Hi,
I am facing a consistent problem in creating a new repository, even after uninstalling and re-installing the OWB client many times. While creating a repository, I get the following three errors, after which the Repository Assistant automaticlly shuts down:
1. The wizard noticed that the installation parameter 'enqueue_resources' of the database GRUSIT is set to 968. The recommended value for Warehouse Builder is 3000.
2.The Warehouse Builder repository owner installation failed on user REPOWNER.
java.sql.SQLException: ORA-04031: unable to allocate 4080 bytes of shared memory ("shared pool", "BEGIN
DECLARE
PROCEDURE brow...", "PL/SQL MPCODE", "pl/sql DS pg")
3.INS0029: Error occured during installation. Check the log file
F:\OraHome_1\owb\UnifiedRepos\log_070504_115828.000.log
for details.
Could you pls help me in resolving this issue?
Thanks in advance,
Tanvi

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

I am trying to install a new printer and I am not sure which application to use?

I am trying to install a new printer with the external CD rom drive on my MacBook Air. When I load the disc it is not allowing the program to run as it is stating that I have the wrong application to do so. How do I install things from the external CD Rom?

What model printer is it?
It is unlikely you need its installation CD-ROM at all.
Mac 101: Printing (OS X Lion)

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Installed a new printer and one line on the top is skipped

Appreciate your inputs.
We have been using the 'Check Printing report' for quite a while; We recently installed a new printer and we see that the alignment has gone wrong.
The checks are printing from one line below as it is skipping one line. Where do we adjust the setting so that the printing starts from the place where we want?
Thanks in advance

Hi
Im no expert but I doubt its a template issue more likely to be the control escape sequence on the printer diriver set up. Check your printer manual and the current set up you have.
Regards
Tim

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

How do i install a new hard drive using time machine

Hi there
I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
Thanks

You haven't inserted your new hard drive yet?.
There's two ways
1. install yourself
2. or pay someone to install it for you.
If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
Its very easy.
1. remove all screws and the lid.
2. remove screws from the black bracket which is holding your hard drive in place.
3. unplug your hard drive.
4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
5. insert these external screws to your new hard drive (there are four screws)
6. insert and plug your new hard drive.
7. screw the black bracket in firmly
8. attach lid and insert all screws firmly.

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

Installing a new gateway

Similar Messages

Maybe you are looking for