Installing Actions in PSE 9/ folders under Locale do not exist ???
I am trying to intall some actions under C>Programs x86>Adobe>PSE9>Locale>en_US>WorkFlow Panels>Actions but Workflow Panels and Actions do not show when I navigate through C: drive--
I have created new folders and named them accordingly and placed the Actions I want to install in the new Actions folder to no avail.
I went to Folder Options and checked the Show Hidden Files /folders in the hope that the system would reveal the missing folders but to no avail.
I am running Win 7 64-bit.
Any ideas as to how to install the actions will be appreciated! Many thanks.
Remove those folders you created, since you're in the wrong place. Actions go in C:\ProgramData\Adobe, etc. Try that (with hidden file viewing enabled) and you should see the whole path.
Similar Messages
-
Installing Actions in PSE 9 Downloaded from App Store
Hi everyone,
I'm seeing quite a few folks who downloaded PSE 9 from Mac's app store that can't install actions into PSE. I've connected to their computers, unhid hidden folders, and looked for the navigation path I would have expected. That doesn't work. I ran searches for the native Elements actions like Blizzard and couldn't find them.
Nothing works. Any ideas?
At first I thought this was a Lion issue, but it appears that the App Store is the common theme. I know the App Store version doesn't have the Organizer, but I was under the impressions that it was the same other than that.
Thanks!
Erin
Texas Chicks Blogs and PicsHey guys, thanks so much for your time!
I've seen it on Lion - a brand new install on a brand new computer and I've seen it on 10.6.7, which is not, I think, Lion.
Mtstuner, I tried all but one of the suggestions on those links you sent. Even revealling the hidden files in the Library didn't do it. But I'll try the last suggestion regardless. If I could just find where Blizzard and the other native ATNs are stored, I'd be good.
I even tried that scary typing in the Mac terminal thing. Never have done that before. It did reveal hidden files, but not the ones I'm looking for.
I think it has something to do with the App version. Without the Organizer, I would expect the file structure to be different. However, I wouldn't expect it to be so different that I can't find the files anywhere. I've been able to find them on a million (or so) different computers/versions of PSE/operating systems. But this is the first time I've ever tried on an App.
I'm going to reconnect with one of these folks who is having issues tomorrow to see if there is anything else I can try. I'll report back if I get any more helpful info. I'm leaving on a vacation tonight, but this has really picqued my curiosity!
Thanks again for the help!
Erin -
This is probably something simple... but how do you install actions in PSE 9.0? I have Windows 7.0 Enterprise, 64 bit. Particularly, I am trying to Install Pioneer Woman's Actions. Thanks for your help.
The directions on the following page should help.
Just substitute pse9 where it says pse8.
http://www.texaschicksblogsandpics.com/the-pioneer-woman/install-actions-photoshop-element s-8-windows-7-pioneer-woman/
MTSTUNER -
I had a crash on my Windows 7 Home Premium and after that was resolved, all my folders under "Local Folders" in my Thunderbird ver. 24.5.0 disappeared! I have 6 accounts but they were not affected and all my emails are there. However I had many folders under Local Folders with very important business messages, but they are not there anymore. I found one of the main folders in my profile, under "Mail" but it contains only a very few sub-folders. How can I recover these folders and where are they now?
What exactly happened in between the 'crash' and ' that was resolved'?
-
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Valuation record 600025 UP01 LOCAL does not exist
Dear Friends,
I have configured split valuation for materials.
1. i activated split valuation in OMW0
2. I created the following in OMWC
2.1 global types IMPORT for 0003 spareparts
2.2 global types LOCAL for 0003 spareparts
2.3 global category P Batch
for this category, above 2 types activated.
for this category, above 2 types are assigned to my Org. Unit plant UP01.
now i created a material 600025 and in accounting1 view, i have taken the following
valuation category - P
price control - V
moving price - 1,00
next i created a PO in ME21N for vendor 400015.
while MIGO against this PO,
after clicking Check the below error is coming.
Valuation record 600025 UP01 LOCAL does not exist
Message no. M7077
how to fix this. please help me.
Thanks in advance
Ravi.Hi,
create val types for your material in MM01,.
Goto MM01 and select accounting view and give your org level plant and in the pop up window enter P val type and in acc view give details for your different val types.
Regards,
Deepak.
Edited by: deepak k b on Dec 11, 2008 8:17 AM -
How to install actions in PSE 9
Hi! I have just downloaded some free PS actions in the *.apn format. Does anybody know how to install them in PSE 9? There is no option "operations" in the window tab, so I cannot mark the actions menu to be visible. Where is it? How to use (=> get access to) them later, once they're installed? Thanks a lot! Anna
What actions are you looking to install. There are two types.
(1) Actions which work from the effects panel. You need an ATN file and a PNG thumbnail and they get installed here:
Windows Start Button >Computer >OS (C:) >Program Data >Adobe >Photoshop Elements >9.0 >Photo Creations >Photo Effects
(2) Actions which use the actions player. You install the ATN file in the actions folder inside Workflow Panels following the instructions from whichever site you got the download. Click image to enlarge for file path (substitute PSE9 for 10 in the file path).
N.B. Program Data is different to Program Files.
If you can’t see Program Data, you will need to change the system settings before you start. Go to Start >Control Panel >Classic View >Folder Options
Then select Show Hidden Files & Folders. -
Some OSX folders under bootcamp (Win7) not visible - why?
Hello,
a few months ago I set up Win7 via Bootcamp on my MBP 13.3" (mid '09) and I noticed that sometimes (when in Win7) I was searching really long for a specific folder (just a folder with some music in it, nothing special). I gave up and thought I might have accidently deleted it. But when back in OSX I directly found the folder, so he was there. The name folder is named "Ambient/Chillout". But interestingly the problems also exists vice versa. Some Word documents (written under Win7) are not visible for me when in OSX. They are not even visible when I copy the document to an external device (flash usb drive).
Does anyone have an idea what is going here?!
Thanks so far.Well, somewhere there is/was a question? I guess.
Without the driver from MediaFour or Paragon you can only see some folders, and not be able to see or mount folders, drives and partitions outside the limits of the AppleHFS and home folder or share folder.
So if you want to use an external drive, you can't.
With a driver you don't need to copy back and forth - word and itunes need write access to open those items.
I don't like Spotlight reindexing Windows partition over and over or leaving hidden ".DS and ._DS" files in every folder so I place them in Privacy tab. -
Folders under public documents not seen/accessed
hi,
hi,
I have folders under public documents
IT
|____IT1
|____IT2
Finance
I have carried out inital permissions setting as per the how to document and SAP note.
For public documents folder Everyone(group) are given read only permission.
for user 1 I have given full access to IT1
and for user 2 I have give full access to IT2.
But User 1 cant see or access IT1 folder and User 2 cant see or access IT2 folder. I dont know what wrong i'm doing.
I have created new user basic role. I'm not using standard eu_role. Is it a problem.
Just wondering why those users are not able to see the folders.
Do I have to attach anything to the Everyone(group).
Regards,
Maya
Kindly help me as what I'm missing.Hi Maya,
please see my answer in your other thread in the KM Forum. One thread should be enough, I guess
Hope it helps,
Robert -
Can't install actions in PSE 9
I've been using PSE9 for three years with no issues but recently, I found I could not load any more actions. I follow the instructions to install them (which I've done many times over the past three years) and while the actions show up in the appropriate folders, when I actually open PSE9, they aren't there. According to other advice I read, I completely uninstalled PSE9 from my system and then reinstalled but I'm having the same issue. I contacted Adobe Care via Twitter and they have yet to figure it out but told me to post the issue here so that's what I'm doing.
I suppose it's possible the particular actions set you have doesn't provide all the files necessary for Elements to add an icon to the Effects panel...
There need to be 3 related files per action: An .atn, .metadata.xml, and .png file.
The .metadata.xml file doesn't have to be particularly complex, but it has to be accurate. One of mine looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<PSEContent xmlns="http://ns.adobe.com/PSEContent/2.0/">
<subscription value="$19.95" />
<name value="$$$/content/filters/BWtoHaFalseColorBlackSpace=BW to Ha False Color Black Space" />
<type value="filter" />
<category value="$$$/content/category/type/AstronomyToolsv1_6=Astronomy Tools 1.6" />
</PSEContent>
If it's commercial software that you don't own the copyright for, you shouldn't feel comfortable with posting such content publicly. But you could compare to what I'm showing above. -
Anyone?
Are you aware that you can just load them into the actions panel by going to window>actions, then clicking the four lined square on the panel and choosing Load Actions from the menu? You don't have to put them into the effects panel anymore and there's no deleting mediaDatabase.db3 that way.
If you really need them in the effects panel for some reason (like for add-on tools) you are probably not finding the right library. The library at the top level of your hard drive isn't exactly hidden in recent versions of OS X, but it's very hard to get to it. The easiest way is to go to the finder preferences>sidebar and turn on Show Hard Disks. Then when you open a new finder window your hard drive will be in the list on the left side of the window. Click it and the library you want will be at the top level of results on the right side. But the actions panel is much easier. -
I am having trouble trying to capture a new Windows 8 image with WDT 2012.
My Setup -
Server 2012
WDS
MDT 2012
Windows 8 ADK
Hyper-V
I have created a new task and I can get the image to successfully deploy the image to a VM but it seems to fail at the Restore User State task.
Once the install Applications task has finished I added a Suspend task so I could customize the image a little. Upon resuming the task sequence is where the above failure message appears. I can see it gets to the next step (which is 'Restore User State')
but that seems to be where is crashes.
Does anyone have any advice on what I might be doing wrong or what I can do to resolve the above issue?WAIK being installed was probably your issue so I wouldn't bother disabling the restore task. It is used to migrate user data, docs, and settings on refreshes, not new builds. It doesn't affect CopyProfile, just note that data will be migrated on refreshes so
some aspects may change, ie wallpaper, shortcuts, etc but what gets migrated with USMT can also be configured.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Install SCCM client to server in DMZ: "MP does not exist"
Hi,
I’d need to put a management point/distribution point in a DMZ.
Therefore I wanted to make sure this MP/DP works before I move it to this DMZ and I:
*configured a Windows 2012 R2, (name: “DMZ01”) server with the prereqs*removed this server DMZ01 from the actual domain*added a DNS entry from DMZ to which I can connect successfully
*added a network access account in order to push the sccm client
*added correct boundary group
Now when I try to deploy an SCCM client to it, I get a failure in the ccmsetup log saying MP does not exist:
Failed to load mdmregistration.dll with error 0x8007007e
ccmsetup
27/04/2015 10:54:48 932 (0x03A4)
Failed to load mdmregistration.dll. Continue deployment.
ccmsetup
27/04/2015 10:54:48 932 (0x03A4)
An MP does not exist on this machine. ccmsetup
27/04/2015 10:54:48 932 (0x03A4)
My questions:
*should I use the management point affinity here to force finding the management point?
*what about the domain certificate (that’s gone now since it isn’t domain joined anymore)? How to deal with this/revive this?
Please advise.
J.
Jan HoedtOk, thanks.
Note: there is no trust between the DMZ domain and the domain in which the "main" sccm server exists.
What are the options there? F.e. could we use Mutual authentication just as with a Mac
https://technet.microsoft.com/en-us/library/jj591553.aspx#BKMK_ManualCertifcateInstallation
Jan Hoedt -
Help for installing actions for PSE 10 on Mac?
The path says finder, library, application support, adobe, PSE 10, Photo creations but this is where my mac differs. My only option after PSE 10 is presets. Under presets I tried pasting the actions in the actions folder and then opening my PSE 10 but this didn't work. Any ideas?
-
Oracle 10gr2 locally is not working after installing Oracle 11g
hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime processGenerally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH
Maybe you are looking for
-
Foreign currency on Transaction S_ALR_87012178
Hello, I am from Mexico and our system Local Currency is Peso (MXN) I am running the transaction S_ALR_87012178 for a customer on the US, (invoices are on USD) if I see the detailed section (invoices), it shows me amounts in Local Currency (MXN) and
-
What if I've waited to restore my phone?
What if I've waited to restore my phone, and have things on there that I'd like to keep?
-
HT201317 How do I link IPhoto to ICloud?
How do I link IPhoto to ICloud?
-
Disp+work.EXE "stopped" - DB-Connect Failed 008192
When I try to bring up my SAP system, I get in the process list: disp+work.EXE "stopped", and in the Syslog, Initialization DB-Connect Failed Return Code 008192 dev_w0 contains: trc file: "dev_w0", trc level: 1, release: "700" * ACTIVE TRACE LEVEL
-
Transfer photos from CD with OS9 software into iPhoto
Here's the deal. I am able to do this, but it takes a long time with a lot of steps, hence, how do I ... or more importantly, can it even happen ... set up an automation. I use to get photos on cd from seattle film works. I want them in iPhoto. The w